S-10 Forum banner
wheels
1-20 of 21 Results
  1. Xtreme / ZQ8
    Hi, I’m new here, and I have a ‘01 Xtreme that I’d like to turn into a corner carver rather than a drag car. I was just wondering if anyone has a flush set-up on their Xtreme. I’ve seen a few online, but no info with them.
  2. Liftin' It
    I am lifting my 1992 gmc Sonoma a total of 8 inches 5" suspension and 3" body lift, I am running 3.42 gears with a 5 speed manual I wanna go with the tallest tire possible any suggestions please
  3. Wheels, Tires & Brakes
    Ive been dealing with some highway speed vibrations and have slowly decreased the amount of vibration by replacing a few parts. However there is still a slight vibration. So I decided to jack the front end of my truck up and noticed that my drivers side tire/wheel spins freely pretty easily...
  4. 2wd
    to those who have lifted there 2wd 2nd gens, what lift did you use? also what’s your wheel and tire set up? i’m wanting to lift my s10 possibly with the 2in rough country lift and put new wheels and tires on. i want the wheels and tires to stick out tho but i’m not sure how to go about that. i...
  5. Wheels, Tires & Brakes
    Hey guys I have a bone stock 2.2 03 5 speed with 95k miles. I want to put bigger tires and new wheels on, and other people online have said you can go up to 30" with no cutting or a lift kit. So I'm not worried about rubbing but I was wondering if the extra weight would be too much for the 2.2...
  6. S10 / S15
    Working on restoring a '93 regular cab. Was thinking about putting some 2010 camaro SS rims on it. Does anybody know if they'll fit or will I need to get adapters? I'm out of town so I can't check myself and I haven't found a legitimate answer anywhere on the old interwebs yet. Any insight would...
  7. Wheels, Tires & Brakes
    I just want to make sure I'm thinking about this backspacing thing correctly before I pull the trigger on new wheels. I'm looking at Bassett steelies, 15x8. I want them to tuck, but stick out maybe an inch or two farther than the stock ones. The stock wheels are 15x7, 4" backspacing if I'm not...
  8. S10 / Sonoma
    Sorry if there's another thread about this specific question, but if there is one I couldn't find it. I have a '99 2WD S10. I'm looking at putting 17x9 1/2 Vette wheels on it, and I've heard I need 2.25-2.5" spacers up front to clear the suspension. Will spacers like this and the corvette wheels...
  9. S10 / Sonoma
    i don’t plan on buying these specifically or even buying quite yet but theoretically would these fit? anything i’ve been able to find on the forums about wheels tends to be kind of vague, so just figure i’d ask. i believe i’ve got about a 3 inch drop from stock so it still has a relatively solid...
  10. S10 / S15
    Been looking through a bunch of threads, but haven't really seen answers for what I am looking for. I have a frame from an 89 s-10 reg cab short bed and I am placing it under a 1953 Dodge B4B truck. It will be bagged and sit low enough (frame wise) to not have to change the tie rods, so about...
  11. Wheels, Tires & Brakes
    I have a stock 2wd 1998 s10 and I'm planning on doing 15x8 with a 3.75 backspacing with 225/75r15. has anyone ran a setup the same or around this and will I have to do any trimming or anything thanks for the help
  12. Xtreme / ZQ8
    I have a 2002 4.3 S10 Xtreme and the previous owner curbed the wheels pretty bad. I want to get new wheels. It came with 16 inch wheels and I would prefer 15 inch wheels like a standard S10. I was told by a tire shop that 15 inch wheels wont clear the calipers and upper control arms. Is this...
  13. S10 / Sonoma
    So I have a second gen v8 s10 I plan on running the fiberglass prerunner fenders with a 4 inch flare built in, what is the widest 15" that I can run safely on the front that sticks 4 inches past stock front fenders?
  14. S10 / Sonoma
    recently got some s10 xtreme wheels for my 96 s10 and the studs are a little short. The lugs still fit on there but not an amount I feel comfortable with. I saw on another thread that this wheel stud size Dorman 610-323 will work but O'Reillys website it won't fit. Anyone have info on this. I'm...
  15. Wheels, Tires & Brakes
    I know the Inline motors are not power houses but If I would to put 15x10s on my truck would I lose a ton of power or would 15x9 or 15x8 be a better option with the 2.2
  16. Wheels, Tires & Brakes
    Hi guys, so i recently purchased 4.3l 1988 S15 Reg cab long box. The guy that had it before me put 15" rims in the front and 14" in the rears, and lowered it quite a bit. He cut the front coils 2" and put a 6" steel block in the back. I'll be correcting this in the future and do a proper job in...
  17. Wheels, Tires & Brakes
    I’m looking for anyone that knows how big of tires I can fit onto a 91 s10 without any rubbing. I’ve seen a lot of 235/60/15 but I don’t know for sure if that’s gonna be the right size.
  18. 4wd IFS
    Hey y’all, So I have another noob question. I’m doing a 6” suspension lift on my Sonoma, and so I’m hunting wheels. I know that for the style of wheel I want, they typically come in a 15x8. My question is this: What offset do I go with so that I don’t have to cut anything on the truck...
  19. S10 / Sonoma
    Hey guys, I’m doing a 6” Rough Country lift on the Sonoma 4x4 (non-zr2) and I’ve been searching for Outlaw style wheels in the size recommended by Rough Country but am having no luck. Anybody got any leads for me? I need a 16x8 wheel with factory bolt pattern and offset, but I can’t find them...
  20. Wheels, Tires & Brakes
    The bolt pattern for a 2wd s10 is 5x120.65 right? I've been told that 5x120 will work just fine though. So my questions is, how much of a noticable difference would that make in ride quality and fitment?
1-20 of 21 Results
Top