tires

i don’t plan on buying these specifically or even buying quite yet but theoretically would these fit? anything i’ve been able to find on the forums about wheels tends to be kind of vague, so just figure i’d ask. i believe i’ve got about a 3 inch drop from stock so it still has a relatively solid...

Other than a little difference in speed, are there any major mechanical worries going from 31" to the 265? I need to replace tires and budget is tight. and as you all know 31x10.5x15 are like the tire makers f&*(&ing baby. Any input is appreciated folks! Howie.

I have a 2002 4.3 S10 Xtreme and the previous owner curbed the wheels pretty bad. I want to get new wheels. It came with 16 inch wheels and I would prefer 15 inch wheels like a standard S10. I was told by a tire shop that 15 inch wheels wont clear the calipers and upper control arms. Is this...

I have a 1994 Chevy Blazer S10 Tahoe LT 4x4. It has P 235/75R15 tires on it right now. I want to know can I go to LT 235/75R15 tire? I was looking at going to the BF Goodrich All-Terrain K02s.

I have a 2.2L 2wd Sonoma with an open differential and am looking to get a little better traction out of it. I don't do anything crazy with it, but tired of getting stuck when there's just a little bit of a slick spot. One option I could do would be to put in a limited-slip differential of some...

I just purchased a 355 Stroker to put into my 91 S10 4WD. Only problem is, that I didn’t think I would be able to do this swap by myself. Now my father and buddy are going to step up and help me drop this engine in with me. The engine is running around 400-450 horsepower. The truck is sitting...

recently got some s10 xtreme wheels for my 96 s10 and the studs are a little short. The lugs still fit on there but not an amount I feel comfortable with. I saw on another thread that this wheel stud size Dorman 610-323 will work but O'Reillys website it won't fit. Anyone have info on this. I'm...

Hi guys, so i recently purchased 4.3l 1988 S15 Reg cab long box. The guy that had it before me put 15" rims in the front and 14" in the rears, and lowered it quite a bit. He cut the front coils 2" and put a 6" steel block in the back. I'll be correcting this in the future and do a proper job in...

I just picked up a set of 18 inch wheels with 235/55/18 tires on them. My S10 2wd Blazer has a 3 inch drop in the front and 4 inch in the rear. I know I've read 255/45/18 is the correct size to use, so before I bolt these on has anyone used the 235/55 size and are they too tall or will they rub?

I’m looking for anyone that knows how big of tires I can fit onto a 91 s10 without any rubbing. I’ve seen a lot of 235/60/15 but I don’t know for sure if that’s gonna be the right size.

I am lifting my truck 2.5inches and am looking to upgrade my rims and tires to 31 inches tire and 15-16 inch rims. I looked at the offset recommended and it says 50mm stock. Is that correct? I can’t seem to find any pro comps or steel rims with this information. My rims now poke out 1 inch in...

Ok, so I’ve be scouring this page for information but figured maybe I could start a thread for some answers to help me out. I have a stock ZR2 2005, I got myself a set of BFG KM3s, 32x11.5 with a set of AR wheels, 15x8 with a 3.75 backspace. Obviously by the picture you can see they do not fit...

As I said, I have a 2000 GMC Sonoma sport side, It has the V6 and is 4x4. I want offroad capable tires that have offroad capabilities. I was looking at 235/75R15 Goodyear Wrangler Radials, Goodyear Duratrak, or Mickey Thompson Deegan 38 A/T. They are between $85 to $185. I want to know if going...

I just bought a 1987 blazer all stock with 110k, the car is on incredible condition but the tires are way too small for my taste. I was wondering if someone could give me some advice on what size could fit this truck or how much do I need to lifted to get bigger tires. Any advice that you guys...