S-10 Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-20 of 36 Results
  1. Liftin' It General
    So, let me start off by saying first that this is my first project vehicle ever. My mechanic skills are early bird at best. (As in all I know is what I've touched in this truck) I want to lift this s10 up significantly, like shooting to be able to slap 34's/35's on there. Now, I've looked online...
  2. 262ci Forum (4.3)
    I have a 1991 s10 pickup woth the 4.3 liter fuel injected and I have replaced pretty much all the pars I could thing of for a rough idle and still can't figure it out. Just replaced the coolant temp sensor thinking that might fox it and still nothing. Also the pickup will not warm up past about...
  3. ZR2 - BlaZeR2 - Highrider
    Hello folks, just registered and kind of a noob so bear woth me. Bought a new LED third brake ligh housing and was wondering how to replace it. Are there two screws in the interrior dome light I have to remove or how would I do this? Pics would help thx. included is an older pic of the rig.
  4. S10 / Sonoma
    I just got a 2002 Chevy S-10 and I’m looking for stuff to upgrade it, it’s fairly stock I don’t really know what’s been done but when I look it doesn’t look like anything has been done. What would be the best thing to do to it? And what’re some good websites to use to find aftermarket parts
  5. 2.2L - 2nd gen 4-banging
    When I got my truck the metal line that feeds from next to the egr was busted or cut in half And had a hose clamped over it well I think the heat got to it and it started cracking and falling apart is there a better way to repair or replace the line?
  6. S10 / Sonoma
    I Currently have a 2003 Chevy S10 that needs a motor. It previously had a 2.2L 4cylinder motor in it. Im in the process of bringing it back to life but I wanted to know what other engines were compatible without doing much modifications? Thanks
  7. S10 / S15
    First and foremost thank you for adding me to this page. I have a 1985 S10 I recently purchased and have been looking for entire Hinge system for the driver top. The previous one has been broken and is not possible to repair as it is entirely in pieces. The previous owner tried welding a...
  8. S10 / S15
    Hey everyone. I'm new to this forum and fairly new to owning an an S10. I recently bought my 91 s10 to be a farm truck but have been having a hard time getting the 4wd to work. Its a long story and I've tried a lot of different things so I'll try to keep it brief. I started by replacing the...
  9. Interior Styling
    what are some options either direct fit or some mild mod seat swaps that anyone has done????
  10. S10 / S15
    I’m looking to get a first gen s10 as a project truck to work on over the summer. Problem is I’m 6’4 and 235lbs. Would I be able to fit in a standard cab? I’m thinking about putting in buckets seats for when I get my bigger power plant.
  11. Wheels, Tires & Brakes
    Just got my chevy and had a problem with releasing the parking break, however it had been sitting for a few years. The guy sold it to me after getting it up and running. Any way, I had to push the parking break up with my toe, and it was fine for about 4 days. Now I can't even push it down to...
  12. S10 / S15
    Hi all. Bent a rod on my 2.5L and found out that the rod guide plate had failed on that push rod. Having a tough time finding this style of guide plate. Is there another style that would work as a direct swap out? I live in remote Alaska so not much to choose from out here. See pic, and...
  13. V8 Discussion
    So I’m currently swapping my 1990 2wd 4.3 with a .030 over 350. I have the mounts and headers but I want to run the original fan and serpentine belt not V-belt. Any tips or tricks you guys have?? Short water pump or regular water pump off the 4.3? Let me know, thanks!
  14. Xtreme / ZQ8
    Fist post. First truck. The noob special! I want to know if I can do donuts in my stock 4 cylinder automatic 2000 2.2L s10 xtreem. It's all stock but I want to know if It will do a decent doughnut with some smoke or will I just look like a loser driving in circles?
  15. Steering & General Suspension
    My 97 s10 is sitting at a little rake. I have already dropped the truck with a flip kit. But I was wondering if the drop shackles will give me an inch to make the bed even with the cab stance??
  16. Blowers and Bottles
    hey i got a 168k 2001 s10 with the l43 engine. Its flex fuel but lm planning on swapping the pump because its on its way out. Im planning on just using an oem one but before I do ive been contemplating putting a turbo on it but keeping it as a daily driver. I wanna definitely get 200k out of...
  17. S10 / S15
    1992 s10 2.5l iron duke tbi. 13 gal. Tank on hydraulics Changed fuel pump, filter, sending,tank, checjed ground.... Nothing. Where is the relay? And anything else i should check? Thanx ib advance for any help!
  18. S10 / S15
    Hey guys, I have a 1986 s10 4x4 with a 2.8 60° v6 and a 700r4 transmission. I got bored and started browsing around looking at different chevy engines online and I found the 3.6 lfx v6. I started to look at the specs and I was blown away seeing it had roughly 300 hp and 275 ft pounds of torque...
  19. Sound and Security
    So I’m putting aftermarket speakers in my 1999 s10 regular cab. When I took the stock speakers out I noticed the reason the driver side wasn’t working was because they’re no wires for a speaker and the speaker wasn’t even hooked up. I got my aftermarket speaker in the passenger side because it...
  20. 262ci Forum (4.3)
    Alright, guys. I've been trying to dig everywhere for info to find out where my oil pressure sensor is located. I only really found one video showing it behind the distributor on a later model blazer. Not sure if mine is the same. My truck has a 91 4.3 and nothing on my manual says anything...
1-20 of 36 Results