S-10 Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-9 of 9 Results
  1. S10 / Sonoma
    So this is the case, i have a chevy s10 -99 4,3L and i have a problem with coolant in the oil. I rarely use the truck so it mostly stands still and before the winter came there was no problem at all and it has just been sitting. When i went to check on the dipstick this morning i noticed a...
  2. S10 / Sonoma
    Hello everyone,(4.3 v6 96k miles, and oil change done 3 weeks ago) heading to work today noticed my oil pressure around this range. Is it ok to be that low instead of being in the middle, any suggestions or gauge just being stupid. Or is it normal?(This was after a 30 minute drive all warmes up)
  3. Transmission & Rearend
    Question I have is should I use standard synthetic Dexron-III or high mileage Dexron-III? My transmission was Rebuilt in 2018 it currently has 16k miles on it. I had some oil pan leaking so I wanted to stop it from leaking constantly. I fixed this with new gasket and filter, so got to thinking...
  4. S10 / S15
    What is the best method and oil type (Synthetic, Synthetic Blend, Conventional) for breaking in a newly rebuilt engine? In my case the 2.8l engine.
  5. S10 / Sonoma
    -its a 2003 sonoma 2wd 4.3 v6 91k miles So i just did a oil change on it and so i took it out for a drive and got it to opperating tempature so i checked the dipstick so see if it was all good and noticed there was a bit of smoke that came out.(It dosent smoke when the car is running or blow air...
  6. S10 / S15
    Hello! I have the CHEVROLET BLAZER S10 (82-94) Petrol 4.3 115kW/156PS And i need to change the rear axle oil and seal. But what kind of oil do i buy? Best regards from Sweden
  7. Transmission & Rearend
    I have a 2001 chevy s10 2.2l with a manual 5 speed nv1500 transmission. What is the correct transmission oil to use and where can I find it?
  8. 60v6 Forum (2.8/3.4)
    The oil filler cap on my 92 2.8 leaks. This is the press in type cap. I have put 2 different new caps in to try and stop the seepage, but they have both leaked! The hole in the valve cover does not look or feel damaged in any way. Is this a common issue on these engines? Does anyone know of a...
  9. 262ci Forum (4.3)
    Hey guys, Just got done doing the oil cooler lines on my '92 GMC, and figured I would document the issues I ran into. below is a link to my personally hosted site where I typed it all out. http://aaerepair.com/page9.html
1-9 of 9 Results