S-10 Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-20 of 49 Results
  1. Transmission & Rearend
    The longer line from the top of the radiator goes to the top connector on the trans and the short line from the lower radiator port goes to the lower connector on the trans or is it another way? Cant find a good diagram anyplace for the stock ones.
  2. Blazer / Jimmy / Bravada
    I bought a blazer out of a mud pit a couple weeks ago for $200. Trans was pulled and they had a "good trans" too it came w both. I wanted to see if this motor runs before i waste time installing this transmission of unknown origin. I have the starter and everything. Can i bolt it up and kick it...
  3. LSx Discussion
    Hey, I have a 84 s10 blazer that I’m going to do a 4.8 swap on. I am looking for any recommendations on what to get as to motor mounts, wiring harness, and any insight as to what I will be facing. Thanks in advance!
  4. Blazer / Bravada / Jimmy / Envoy
    I have a 1995 Chevy Blazer 4Dr 4x4 with the intermediate ODB system. In 1995 they were transitioning from OBD1 to OBDII, so the model was in-between, so it referred to as a OBD1.5. Anyways, I need to bleed the Kelsey-Hayes 4WAL. The process is usually called the “system function test.” This...
  5. Wheels, Tires & Brakes
    I have a 1990 Blazer 2WD and I have always had a brake code. Finally got around to pinning it. 3 fast then 1 slow. So looks like 31. This is a Right Rear wheels speed sensor or circuit open. I know for a fact there is only the park brake cable and brake line going to my right rear drum. My...
  6. Blazer / Jimmy / Bravada
    I got tired of buying drinks for my passenger floorboard, so I had a guy at work 3D scan my cupholder and I designed an insert that allows it to hold cups. I believe this console was only in '92-'94 S10 Blazers/Jimmys, but I may be wrong. If you have one, you know what I mean. It can hold...
  7. Blazer / Jimmy / Bravada
    What other years are compatible with the 1985 s-10 blazer? The info I have is that I need an engine with these specs… 4WD, 6 cylinder, B 2.8L, 213L, OHV, 173 CID ? It’s a project car for my teen son and I have zero answers for him. Any and all help is appreciated.
  8. Blazer / Bravada / Jimmy / Envoy
    Hi I am in Australia and looking for a pair of RHD tail lights for a 2002 S10 Blazer. Need to have amber turn signal. Anyone know the best place to find them?
  9. Electrical / Lighting
    Interior lights work with all controls except the door switches. Any hints on removing them, especially driver's side. Blazer has been stored for several years and I'm guessing they are some corroded. Switches do work for the security system etc. Everything checks out except right at the...
  10. Blazer / Bravada / Jimmy / Envoy
    I got a message about a F-250 buried to the frame that already had failed recovery attempts and all tow companies wouldn't touch it! It was about 500 yards from the road. The truck is a 4X4 diesel with a new set of mud tires on it. He parked it to look for mushrooms, and after checking a tree...
  11. Member Projects
    Hey Everyone, My name is Kevin and I've been an avid forum lurker and an s-series enthusiast for the past 7 years. I decided to post my build in here as a way to keep it all in one place. I'll preface this by saying that this was my first build ever, in fact it was my first time doing anything...
  12. 262ci Forum (4.3)
    Hello S10 Community. I'm new here, and have perused many, many forums and threads, looking for an answer to my question, but didn't find any. So, here goes... I have a 1992 Chevy S10 Blazer with the 4.3 V6 . When I first start it up from a cold start, it high-idles for about 1 minute until it...
  13. V8 Discussion
    I have a 1987 S10 Blazer, 350,700r4. I recently put a TCI Fast gate shifter in it. Per the track rules and just general safety I want to hook up the neutral safety. This truck doesn't have a factory Neutral safety. If the column shifter isn't in Park or Neutral the key won't turn.... So how...
  14. 60v6 Forum (2.8/3.4)
    I have a 1985 blazer 2wd with a 2.8 v6 in it. It lacks the power i want and im wondering which engine swap will give the best bang for my buck. Ive seen 3.4 swaps and 4.3 swaps, which is easier and more cost effective ?
  15. S10 / S15
    I have an 89 s15 pickup and since I've had it its had black aftermarket tail lights. a few months ago I found original chrome lights and bought them cause I thought they looked better. but the mounting locations for the screws are different. I'm thinking the ones I bought are for a blazer/Jimmy...
  16. Blazer / Bravada / Jimmy / Envoy
    I have a 84 s10 blazer but the whole drivetrain is from a 2002 blazer 2wd. The motor is a 4.3 vortec v6 and mostly all the wiring from the 2002 blazer is in the 84 and works. Except the gauges obviously. I want to be able to at least know how much fuel I have. Will a aftermarket fuel gauge work...
  17. Blazer / Jimmy / Bravada
    Thought I'd just show the pain I'm going through putting in this newish t5 bellhousing.
  18. Liftin' It
    (2002 Blazer LS 4x4 4 door) Just ordered the $65.00 torsion key/leaf spring shackle lift online. Looking for pictures of s10s/blazers with this lift, and I am wondering if I can get away with using the stock shocks for a little bit until I have money for extended shocks. Also looking for any...
  19. S10 / S15
    Hello, I have an 85 s10 blazer 4x4 that had originally came with the 2.8l v6 but was swapped out with a 3.4l v6 out of a 94 f-body camaro. During the swap I used the intake and rochester 2se carburetor from the 2.8 and installed it onto the 3.4l. I’ve read about how much this chokes the motor...
1-20 of 49 Results
Top