S-10 Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-8 of 8 Results
  1. S10 / S15
    This is a build I started for fun. 1993 Chevy S10. By no means am I an expert, but all work was completed by me except the engine build (only because of the guarantee and hp rating that came with it). It was hard to pass up for the price. I have built a few small block chevys in the past and I'm...
  2. V8 Discussion
    I have a 1992 S 10. 2.8 v6 5 speed manual i want to do a 350 swap.I want to keep it a 5 speed manual with out relocating the shifter hole and keeping the bench seat is this possible.What is the simplest way to do it and which transmission is going to hold up to the 350.All input is...
  3. Articles - Engine, Core
    I did all the searching and read all about what else was needed, that will not be the topic of this discussion. I'm just looking to find a late model 350 vortec that I can just replace all the seals and gaskets on (MAYBE throw a mild cam and new bearings in) and toss it in place of my worn out...
  4. Articles - Engine, Other
    I have a 87 S10 Blazer with a 350, over the winter I moved the alternator down on the passenger side, I had to put a new alternator on because mine was the larger case alternator and wouldn't fit in my brackets. I purchased a new belt as well.. Now I'm having issues with the belt slipping the...
  5. Transmission & Rearend
    Looking for a torque converter for my 99 ZR2 s10 with a 350 Vortec and LT4 Hot cam. Stock 4L60E trans from the 4.3 (298mm shaft, 10.75 bolt circle, 12inch converter) Trans bit the dust and since it’s being rebuilt, I may as well put a better torque converter in. The stock L35 converter done...
  6. V8 Discussion
    I have a 94 S10 4x4 with a 4.3 vin W that took a dump. I have a 5.7 out of a 97 C1500 Silverado to put in with all the wires and ECM except OBD2 port. I'm trying to figure out if I'll need all the wiring or if anything already in the truck will work or any problems I may run into. I've...
  7. V8 Discussion
    Hi guys! I tried using the search option, but I couldn't find anything with pictures or detailed help. I have a 1988 S15 that I put a Vortec 350 in. I'm having trouble putting the radiator in with the fan. I read on here that people like using the corvette Rad More Information for APDI/PRO...
  8. V8 Discussion
    I currently have a 91 s10, 4.3 tbi 4x4. I recently installed the 2.5” rough country lift kit and put new 31s on it. If I were to put a 350 v8 into my truck, do you guys think the added lift and tires will cause a decent loss in HP? I want to be able to race it with some buddies on a “legal...
1-8 of 8 Results
Top