Search Results for ‘2wd’

Can someone please recommend me some shock extenders? I’m having trouble finding any for 2wd front shocks instead of 4wd. 2002 Chevy S10 LS 2WD

Everything I find says that the wheel spacers only fit the rear hub of my 2WD S10. I’ve read that it has differences but I’m struggling to find anything that will work for the front hubs. I’m looking for about 1.25 inch. 5x4.75 is the rear, assuming that should be the front too.

I’m doing a v8 swap on my 99 truck and found a 98 4wd nv3500 trans. It’s the only 98+ nv3500 I’ve been able to find and I was wondering if there would be any way to use this in my swap. I can get a custom made drive shaft but I just need to know if I can somehow use this trans. Thanks!

I’m doing a v8 swap on my 99 truck and found a 98 4wd nv3500 trans. It’s the only 98+ nv3500 I’ve been able to find and I was wondering if there would be any way to use this in my swap. I can get a custom made drive shaft but I just need to know if I can somehow use this trans

Bought 2 4x6 h4 LEDs headlights off eBay but they kick off my 95 base's dismal headlights when the parking brake comes off. I assume it's because it thinks the bulbs are out.. I have tried resistors and headlight adapters but I can't get it to turn them on. Brights work and my normal headlights...

I've looked all over and I know it's been asked before but I checked all the places recommended on the previous threads on it. I need the retainer cup (washer) for the body mount bushings on my 2003 s10 4.3l rwd. I already bought the energy suspension bushing kit and went on LMC and ordered all...

I have a 2000 extended cab sls 4.3l sonoma 2wd. Im just curious if anyone knows what 4.3l motor(i.e. vehicle year, make, or model) would be the most direct fit. Looking to do it myself just not sure what variation of the motor would be closest. Thx

I'm looking to lower my '99 2WD, and Belltech seems to be the way to go. That said, I'm not sure I want to run blocks in the rear because I've heard they worsen wheel hop and axle wrap but I've also heard of a lot of problems with their leaf springs. Does anyone have any experience with a...

Currently in a bad spot with my 2002 blazer 2 door. It's 2wd, 4.3 automatic. The 4.3 is shitting the bed, want to motor swap it. I need all the "ins and outs" on suggestions on what to look into buying motor wise, and what it would need to all hook up and run right. 5.3? 350? If so, should the...

I have a 2.2L 2wd Sonoma with an open differential and am looking to get a little better traction out of it. I don't do anything crazy with it, but tired of getting stuck when there's just a little bit of a slick spot. One option I could do would be to put in a limited-slip differential of some...

These brakes are shafting me and it's driving me crazy! Got my 2004 Blazer Xtreme with the knowledge of the brakes beginning to stick, no big deal, it's brakes Changed all calipers, hoses (except carrier hose) pads, rotors seemed okay so left them for now. Trying to bleed the system and...

Lifting my old 2001 S10 2wd 4.3L. Putting it on a 5" lift with fiberglass prerunner fenders to be able to clear 35s. Any suggestions or concerns I should upgrade or pay attention too, transmission, gearing, etc. Since I know nothing about lifting this truck? Any help would be great!

May be simple may not be. I bought a 97 s10 4.3l 5 speed about a year ago it’s super sketchy but runs, has what looks like a kill switch under the dash and everything else. Every now and then it seemed like the starter would skip so i popped it off and it was only held by one of the two bolts...

If 2wd hasn't scared you off already, hope you stick around. I'm buying the first truck I owned back out from under my dad to run in the Nebraska Gambler 500 this year. Its a 1990 S10 Tahoe, extended cab with the 4.3, 150,000 miles, but the body is rotting off around it. Frame is mint, but the...

I got a stock 95 s10 extended with worn down tires and it’s obviously terrible in snow but just wondering if anyone has all terrain tires and is fine in snow with 2wd. I even put weight in the back.

I've been trying to find a replacement for the past 2 months. Am I just an idiot or does the 2wd Pitman Arm have two holes instead of just one with a balljoint? Does anyone have a link to a vendor? Or maybe some advice? I have a 2002 4.3L 2wd Xtreme

hello I have a 1999 S10 pickup 2wd. I recently just picked up a 5" lift that comes with 3" front lift spindles w/ brake lines, 2" front lift coil springs, and 2"-5" rear adjustable lift shackles but I don't think they come with the shocks. Does anyone know what shocks I should use? thank you

Hey guys im new to the forum. I have a 2wd 91 s10 4.3 that i put a th400 in. Im having a problem figuring out the driveshaft. I cant afford to have one made. By any chance has anyone here done this swap in the same truck? If so do you know how long the driveshaft was? Are there any cheaper...

The bolt pattern for a 2wd s10 is 5x120.65 right? I've been told that 5x120 will work just fine though. So my questions is, how much of a noticable difference would that make in ride quality and fitment?