S-10 Forum banner
2.2l
1-19 of 19 Results
  1. S10 / Sonoma
    '97 4 banger 2.2l manual trans So Im mid head swap and realized my new head is a 319 and not a 319-S like the original head was. Everywhere I have looked says they are interchangeable, and there is no freeze plug in this so I am good there. However I did notice these ports in the head and with...
  2. 2.2L - 2nd gen 4-banging
    Whats up y'all, I just got this truck a few months back and it's been my daily since then. Been keeping up with maintenance, but this one issue has mostly eluded me. Every once in a while, it'll have a long start where it'll just crank for a while, then I'll try to start it again and it fires...
  3. 2.2L - 2nd gen 4-banging
    Hello i have the 2.2l inline 4 extended cab s10. It is from 1998 the rear end is a gt5 code with 4.10 gears. What max gear size will i be able ti fit in it for torque? Appreciate it!
  4. 2.2L - 2nd gen 4-banging
    1997 2.2l manual trans. 165k So recently my head gasket blew out due to a bad radiator that I didn't notice immediately and it overheated. After a change I thought all was peachy and thought I had fixed the radiator problem with a new hose and clamp. Not so. The radiator entirely gave out and...
  5. S10 / Sonoma
    Bought this truck a couple months ago and I've been having some problems. When I went to get it inspected I was waiting for the guy and I started leaking fuel from the Vent Valve that apart of the EVAC system. Luckily it was outside of the mechanic so I had them "fix" it which they didn't do and...
  6. S10 / Sonoma
    I have a 96 s10 with the 2.2L and a 5 speed with 170K miles, my truck is idling rough and my mileage is slowly getting worse. Im averaging between 21 and 23 mpg around town, I used to get closer to 30 mpg. Also sometimes it doesnt want to start on the first try, but fires up on the second...
  7. 2.2L - 2nd gen 4-banging
    I have a 96 s10 2.2l that had a blown engine. Pulled that engine and replaced it with 99 2.2l out of a s10. I kept the intake from the 99 and did some wiring so that all the sensors would match up (all sensors are showing up working on the scanner). Changed the crank sensor and put in fuel lines...
  8. 2.2L - 2nd gen 4-banging
    Engine went bad in my 99 and I bought a 97 engine for dirt cheap... I thought I could just use my head but some say they are some other differences??
  9. 2.2L - 2nd gen 4-banging
    Hi guys I'm always reading other people's post for info on my 2.2l s10. Anyway so I have a 2001 gmc Sonoma 2.2l. I did the timing chain because it broke, since I was already into it, I did the gears, and oil pan gasket, and the thrust plate on the cam as well as replacing the cam cover on the...
  10. S10 / Sonoma
    Aloha Guys! I own a 2003 S10 2.2L, Manual 5-Speed. I recently had a my check engine (or "Service Engine Soon") light illuminate. I keep up with all maintenance so that's not the issue. I tried to connect a scan tool to my OBD-II and I found that I had no signal coming from my OBD-II to connect...
  11. S10 / Sonoma
    I've searched all over the net and also here to end up empty handed. I have a 2.2l 4 banger that I want to upgrade the injectors in for a decent price. Would these happen to be a straight up swap? Will I need to tune? Any better alternatives to get to 24#? Seipower/cavalier world was selling...
  12. Heating and Air Conditioning
    Hey all! I’m new here, and newly the owner of a 1994 S10 2.2L with the 5 speed std trans. I picked her up for a great price, runs and drives, at 234k miles. It needs maintenance (tires and brakes) and the only other ‘serious’ issue is the air conditioning doesn’t work. However I’m hoping I’ll...
  13. 2.2L - 2nd gen 4-banging
    I have a 1997 s10 with a 2.2 5 speed as yall may know they didnt come with tachs i recently bought a 1997 blazer with the 4.3 i got the gauge cluster out of it can i make that tach work for the 4cyl and also when i v8 swap can i use it there
  14. 2.2L - 2nd gen 4-banging
    When I got my truck the metal line that feeds from next to the egr was busted or cut in half And had a hose clamped over it well I think the heat got to it and it started cracking and falling apart is there a better way to repair or replace the line?
  15. Xtreme / ZQ8
    Fist post. First truck. The noob special! I want to know if I can do donuts in my stock 4 cylinder automatic 2000 2.2L s10 xtreem. It's all stock but I want to know if It will do a decent doughnut with some smoke or will I just look like a loser driving in circles?
  16. S10 / Sonoma
    I had a issue were my clutch would lose all pressure and I could not shift at all now I put a new clutch master cylinder in it and now I can shift but after sitting it will not let me shift and there are small bubbles coming up into the revorior after pumping the clutch a little. While putting...
  17. Transmission & Rearend
    Today while driving with the windows down and no music I noticed that my truck is making a squeaky noise somewhere around the clutch or flywheel when the clutch was not put in if I put in the clutch it would stop or not be as loud but after sometime the noise will go away has anyone had any...
  18. 2.2L - 2nd gen 4-banging
    After driving for a few mins when I come to a stop and the truck will start idle weird it will rev down then back and repeat until I out pressure on the gas pedal but today I found out that if I have my defrost on it will idle fine has anyone had this issue this is my first s10 and first over truck.
  19. Transmission & Rearend
    hey everyone, i am curious and need some technical support about a question i have. my truck makes about 160hp at the crank and i just raced a stock 2.2l chevy cavalier and the cavy beat me. i am pretty sure it has to do with the gearing in his transmission. i have a local scrapyard where i...
1-19 of 19 Results
Top