S-10 Forum banner

1998 s10

  1. Third Brake Light

    Electrical / Lighting
    For my 1998 s10 I have all the running lights working besides the third tail light either it is messed up or it is not a running light like how the tail lights are. I have looked all around the internet for answers but I could not find anything could someone give me some incite
  2. 98 return line leaking

    S10 / Sonoma
    I just replace the fuel pump the filler neck on my 98 and I had to fix some lines in and change the fuel filter when I reconnected them and I believe it’s the return line is leaking out of the quick connect. My question is what would’ve caused it to leak because it’s the same line I just put it...
  3. Clutch Grabbing while to the floor

    S10 / Sonoma
    I had a issue were my clutch would lose all pressure and I could not shift at all now I put a new clutch master cylinder in it and now I can shift but after sitting it will not let me shift and there are small bubbles coming up into the revorior after pumping the clutch a little. While putting...
  4. Squeaky or noisy flywheel or clutch

    Transmission & Rearend
    Today while driving with the windows down and no music I noticed that my truck is making a squeaky noise somewhere around the clutch or flywheel when the clutch was not put in if I put in the clutch it would stop or not be as loud but after sometime the noise will go away has anyone had any...
  5. Rough idle when defrost is off

    2.2L - 2nd gen 4-banging
    After driving for a few mins when I come to a stop and the truck will start idle weird it will rev down then back and repeat until I out pressure on the gas pedal but today I found out that if I have my defrost on it will idle fine has anyone had this issue this is my first s10 and first over truck.
  6. How do I Disable the DRL’s on my 98’ Canadian-built S10

    S10 / Sonoma
    I know there are so many threads on disabling the drl’s and I promise I’ve picked through all of them it seems and still can’t figure this out. I’ve tried pulling fuses, bending the correct prongs, pulling the headlights out and snipping wires. Everything I’ve read to do doesn’t apply to the 98’...
Top