S-10 Forum banner

Search results

1-20 of 26 Results
Advanced Search
  1. Best Alternator for 4.3L?

    Electrical / Lighting
    So what is the best alternator for the 4.3L? I have viewed previous threads but havent seen a concise answer. I see a Ac Delco number 335-1080 and 321-2159. 321-2159 seems to be about $100 more than 335-1080? Why? I have also seen high out put part number from the full size pick up...
  2. S10 to blazer conversion

    S10 / S15
    Yep i would think thats' one way to do it.
  3. Rag Joint?

    262ci Forum (4.3)
    I am not sure where you mean to click? Part number for that universal joint? Just a bolt in?
  4. 2000 S10 alternator problem or?

    Electrical / Lighting
    I am having the exact same problem - my volt meter drops to 10-12 under load. Besides the ground to the battery what other grounds are there on these trucks? If it needs an alternator, which one is recommended? Do Four Seasons last? The high output one from the full size trucks?
  5. Wrecked my truck!

    S10 / Sonoma
    If your local yards don't have the parts you need.. I would highly recommend going to car-part.com and getting them.. love that place.. you can search for any part you need for your truck and get a really good result list back of salvage yards that have those parts.. including by color or...
  6. S10 to blazer conversion

    S10 / S15
    I am a design engineer, and I would think probably the best way to do that would be take the box off the s10 and drop the complete back of the Blazer onto the frame. Keep the cab of the s10 and rear of the blazer separate.. sort of like a topper/camper on the back and cab up front.. and just...
  7. AC Pulley Noise? ?

    262ci Forum (4.3)
    My AC Pulley has started to make a pretty loud rthymic squeaking noise.. Does the pulley/bearings just need to be replaced? Or is there more involved in it? Looked at old threads .. Didn't really find just a specific thread on just the pulley making noise. I was going to attached an mp3 file...
  8. Rag Joint?

    262ci Forum (4.3)
    OK so that universal joint is a direct replacement for that rag joint? What is the part number? Can you just remove the rag joint and bolt this in? This gives you better tighter steering than the stock parts?
  9. Rag Joint?

    262ci Forum (4.3)
    Is this the rag joint mentioned in previous threads to replace for tightening up the steering on these trucks: ACDELCO 26026564 Steering Shaft Universal Joint - Includes Sphere; Center Spring & Joint Tim
  10. Distributor cap/rotor for the 4.3?

    262ci Forum (4.3)
    Will Do Thanks..
  11. Codes and a steering ?

    262ci Forum (4.3)
    I bought a pitman arm and idler arm to replace to tighten up the steering on my 2000 Jimmy 4.3 l.. I also saw, from previous threads, that replacing the rag joint on the box helps a lot also? Currently my steering seems pretty loose and not on center, it also seems a bit irregular.. there are...
  12. Distributor cap/rotor for the 4.3?

    262ci Forum (4.3)
    Thanks
  13. Distributor cap/rotor for the 4.3?

    262ci Forum (4.3)
    Thanks, The vents in the distributor?
  14. Distributor cap/rotor for the 4.3?

    262ci Forum (4.3)
    So i just purchased the AcDelco D328A cap and D465 rotor for my 2000 GMC Jimmy with the 4.3 v6 from online. I read a lot of threads that mention cap corrosion, missing issues, aluminum vs brass electrode debates and basic cap design. The cap/rotor should be here in a couple days. Is the OEM...
  15. 4.3 Lifter (?) tick fix

    262ci Forum (4.3)
    Whats the deal with lifters? I bought what i though twas an 8 pack of lifters HL128 and just got one back.. even though the photo for that item defnitely showed 8 lifters you only get one? How do they get away with picturing 8 and only sending one? someone need sdto look into how trying...
  16. 4.3 l Engine Swap Help

    262ci Forum (4.3)
    I posted on here in another thtread about my lifter tick issue.. which was extremely liveable.. just a ticking that you didn't hear if you kept the windows closed.. but then Sat night i wanted to get to the bar and took off with the e-brake issue, red light on, and it wasnt too bad going there...
  17. 4.3 l Engine Swap Help

    262ci Forum (4.3)
    My truck is a 2000 GMC Jimmy. I will get you the Vin digits when it gets light out.. later today. Locally, there is a 2003 4.3 Silverado engine available . Would that fit? Would it possibly have the same lifter tick + issue the previous engine had?
  18. 4.3 l Engine Swap Help

    262ci Forum (4.3)
    So i drove my s-10 with the emergency brake on, couldn't get it released and thought it was non functional and think i caused the engine to throw a rod.. so i am thinking my best route of action is to swap in another 4.3? So checking local recycling yards and craigslist ads and facebook...
  19. 4.3 Lifter (?) tick fix

    262ci Forum (4.3)
    Its a 2000 GMC Jimmy.. as far as i know its stock.. trying to find the best deal on lifters that i can.. the AcDelco HL128, 8 pack at around $30 seems to be the best deal to me.. ? I am thinking they are the same as the HL120s only sold in a group of 8? We were told our truck has a...
  20. 4.3 Lifter (?) tick fix

    262ci Forum (4.3)
    Question are the ACDELCO lifters HL120 - singles and HL128 an 8 pak of the same lifters (HL120) only 8 of them? or are they two different lifters? It looks like the Melling lifters are not roller? The AcDelco lifters are roller lifters? This is a stock engine.. Do roller lifters work/ are...
1-20 of 26 Results
Top