Search results
1-20 of 425 Results
-
700r4 transgo reprogramming
Transmission & RearendI have a 700r4. Type 2 and Aux valve body. I recently added a 700-2&3 kit full stick. Now I have it back together and I don't have third gear. It's not sloping it's just not there. Now I opened it back up It looks as if everything is ok. But still no third gear. So what should I be looking for...- 0
- 425
-
Tha s-10 ·
-
V8 swap for my 1999?
V8 DiscussionYea i have the whole top in off a vortec if someone needs it. its just ben collecting dust -
350 TBI Flooding probs! need help ASAP!
V8 Discussioni would have to agree with superbee. but if you unplug the dist. totally what happen then. if you get no pulses from dist it should squirt no fuel, right? -
Whats my 92 S-10 V-8 worth?
V8 Discussioni'd buy the grill and hood if you wanted to make some extra money off it. what school were you in i went to unoh i couldn't think of selling my truck so i fixed it and took it with me just keep it -
Fuel Pump + Carb = To much fuel = what are my options
V8 Discussionyou need a regulator like this http://www.malloryperformance.com/ProductDetails.aspx?modelNumber=4200&productID=2643&majID=220&minID=0&selection=&minselection=7 i use this and never had any probs. -
V8 swap for my 1999?
V8 Discussionthe price rang is what you make it cheap, cost more in the end but some rather do it that way cause its what they can afford. i have never done a newer truck but if it has 4.3l its fairly easy and less expensive if going carb. staying with fuel injected will be more of a job. -
350 TBI Flooding probs! need help ASAP!
V8 Discussioncheck grounds you didnt ground one injector by accident. -
Vortec build some minor questions
V8 DiscussionYea that's the cam when you say lower you mean in duration? Also I've Ben doing some reading on vortec heads they say that a double grind works well. Saying that what's you guys recommendation far as cam choices. -
Vortec build some minor questions
V8 DiscussionWell that's just my question on that comp ratio what's my best choice in a cam this cam kicks in at 2800rpm I want something with I lil more torque -
Vortec build some minor questions
V8 DiscussionI have 91 s10 3.73 posi rear, 700r4 trans shift kit some other work, 99 vortec motor specs are 9.4:1 comp ratio with a summit cam .488 intake and exhaust, 234 duration 114 lobe separation. the cam requires 9.5:1 comp ratio. also heads port and polish, seats grind down and beehive springs, 1.5...- 6
- 871
-
Tha s-10 ·
-
-
-
700r4 question
Transmission & Rearendok so i got that part figured out now to my tv cable. Which car can i get a mounting bracket for it. Or with a measurement taken how much of cable is pulled out on idle? -
700r4 question
Transmission & RearendI had a question about the 700r4. The 4 pin plug on the side where do the wires go to. I know it controls the lock up but does it run off the speed sensor. If i dont have the harness where should i run the wires how do i hook them up.- 5
- 631
-
Tha s-10 ·
-
Is there a s10 forum logo sticker
Community HelpOk smart ass where do you buy it at is there an s10 forum store? -
Is there a s10 forum logo sticker
Community HelpI have ben looking every where for a sticker and i can't find nothing.- 65
- 655
-
Tha s-10 ·
-
upgrade choices need some help
V8 Discussionthats what i was leaning to or some kind of boost. but i really want simple upgrade first -
-
91 s10 V8 swap
V8 Discussionyou need 90 degree engine acc. Mostly ac compressor, ps pump, pulleys. You might have to have some ac lines welded up. On one i did we went to the junk yard and took the accessory of a 86 monte carlo it worked good -
1-20 of 425 Results
Join now to ask and comment!
