S-10 Forum banner

Search results

1-20 of 153 Results
Advanced Search
  1. i need help with choosing a good tire brand

    Wheels, Tires & Brakes
    im getting 235/45r17 front and 285/40r17 rear and i need a tire that is good for wet and dry but also good for a little autocrossing. what brand tires should i look into?
  2. lowering question

    2wd Droppin'
    im getting 2 inch drop spindles 2 inch drop coils for the front and 3 inch drop leafs with 2 inch blocks in rear. also putting tall upper and lower ball joints on. maybe a 33mm sway bar
  3. lowering question

    2wd Droppin'
    will a 4/5 drop handle as good as the zq8 suspension?
  4. lowering kit please help.

    2wd Droppin'
    it is 2 inch drop coils paired with 2 inch drop spindles. do you think i should add the spacers it came with or leave them out?
  5. lowering kit please help.

    2wd Droppin'
    if you can only answer one of these questions that's fine. 1. my belltech lowering kit that is 4/5 came with spacers for the front springs. do i need to use them? 2. can i use my stock control arms if i install tall ball joints?
  6. lug nut size help.

    Wheels, Tires & Brakes
    i want to get these rims here in the link below. i want to get mcgards lug nuts and im having trouble finding the right size lug nuts. can you direct me to some that will fit? http://www.summitracing.com/parts/bsp-rs037956155n/overview/
  7. Is this brake upgrade good enough?

    Wheels, Tires & Brakes
    I want to put hawk hps pads matched with some good rotors like stoptech premiums or any good rotors. Will this be adequate for good stopping power? I really dont want to do a blazer rotor/caliper swap.
  8. Question about tire size

    Wheels, Tires & Brakes
    I have 275/60r15 in the rear and I want to switch to 285/40r17 which is 2 inches shorter and a little bit wider. How will this effect the way it performs, accelerates ect. Also I will be going from a steel wheel to billit aluminum wheels.
  9. powertrax no slip help

    Transmission & Rearend
    if i install a powertrax no slip differential in my s10, is it dangerous in the rain if both wheels lock up? also im going to lower it 4/5 and put fat tires on it such as a 285/40r17. will it powerslide easier?
  10. Low profile tire help

    Wheels, Tires & Brakes
    Do low profile tires such as a 235/45 17 with a 4 inch drop make the truck ride bad and rough? How would it feel?
  11. help with 4/5 drop.

    2wd Droppin'
    so i want to drop my s10 4/5. i want to run 285/40/17 tires on a 17x9.5 rim. i want the truck to have a slight rake in the back and i don't know what rim width and exact tire size i should run for the front. not sure if i want a 17x7 or 17x8 with either a 235 or 245 tire. please help.
  12. help with tire size!!!

    Wheels, Tires & Brakes
    sorry i meant a 285/40r17 not 45. would it sit 2 inches lower if i have a 275/60r15?
  13. what is a good brake rotor and pad upgrade for better stopping power?

    Wheels, Tires & Brakes
    i was also wondering what brake rotors i should use for the hawk pads. should i use slotted or not?
  14. what is a good brake rotor and pad upgrade for better stopping power?

    Wheels, Tires & Brakes
    i am thinking of using hawks hps pads. are they a direct fit into the stock caliper?
  15. help with tire size!!!

    Wheels, Tires & Brakes
    I have a few questions regarding tire sizes. 1st. right now i have 275/60r15 in the back and im thinking of switching to a 285/45r17. this is a 2 inch difference in height. does that mean the truck will be 2 inches lower? 2nd. how will my acceleration and gas milage be affected?
  16. what rim size is correct?

    Wheels, Tires & Brakes
    i want to run 17x7 front and 17x9.5 back. what should the backspacing be for both so that the front rims are not sitting narrower than the rear rims? im going for the wide stance.
  17. what wheel size should i get?

    Wheels, Tires & Brakes
    i am thinking of running a 17x9.5 rim in the rear and 17x7 in the front. what backspacing size should the rims be so that they have the same track width and so it has a wide stance?
  18. what brake pads and rotors should i buy?

    Wheels, Tires & Brakes
    i have autozone duralast gold ceramic pads and they suck! they dont stop very well and they make a rough grinding noise when i reach the bottom of a hill. im using my truck as a daily and i might be taking it to some autocross events here and there. what rotors and ceramic pads should i get for...
  19. Can i use a different brand hid bulb with another brand wiring harness?

    Electrical / Lighting
    i hooked up my DDM hid bulbs to another brand hid kit because i did not want to replace the whole wiring harness. everything is compatible and works great. is it safe to leave it like that or should i replace the whole wiring harness?
  20. DDM tuning hid kit no instructions?

    Electrical / Lighting
    i got a ddm hid kit and there are ABSOLUTELY NO instructions or ANYWHERE that says it is in fact DDM TUNING. why is this?
1-20 of 153 Results
Top