By popular demand 1st gen sfbd on 22's - S-10 Forum
 1Likes
Reply
 
LinkBack Thread Tools
post #1 of 681 Old 01-23-2014, 10:25 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
By popular demand 1st gen sfbd on 22's

Ok here we go, was hesitant to do this but here goes nothing. I bought the truck from my cousin in 2003 it was bagged but not very nice so I drove it for a bit then started my own project. First I put a belt drive on (York 210) cuz the 12 gallon with 1 450 wasn't cutting it then i put smc valves in place of the junk that was there. Then I bodydropped it shortly after that I had a local shop put a 4 link bob with tubular bridge on it. Drove it awhile then s*** hit the fan. I lost a lowest of the low contest to a car by 3/4" so I came home and cut the rockers off re did the bd to the door put a v8 in with tuned port fuel injection. Then decided I didn't have enought head room so in 2007 me and a local shop owner built a stock floor frame for it and I got a new cab. Truck has sit since 2008 in my dads yard got a wild hair after wrecking another project I finished so here we are. Pics to come now

Frame when I restarted project

Where truck sit for years


Mounted new 22r motor

So me and racermike started the bed and rolled wheel tubs at my work

So we skinned it and smoothed inside


Cut out firewall and redid everything made tubs from scratch rolled them at my work

1 side done

Built 2 stainless crossmembers for frame/bag mount

Before skin

Had to moch up


Shaved wiper cowl

Firewall finished almost

Dash mounted

Redid brakes

Mids amp going in truck

Old project 96 taco 20"-22" smoothies hrf black totaled I have other pics but can't find them

Motor donor truck


That's all for now and all body work is credited to racermike cuz I don't know s*** about it

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
Sponsored Links
Advertisement
 
post #2 of 681 Old 01-23-2014, 11:11 PM
Registered User
 
mhilt13's Avatar
 
Join Date: Jan 2010
Location: Indianapolis, IN
Age: 34
Posts: 2,393

User is: mhilt13 is offline
Re: By popular demand 1st gen sfbd on 22's

glad you started a thread. looks real good
mhilt13 is offline  
post #3 of 681 Old 01-23-2014, 11:13 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Lol, thank you

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #4 of 681 Old 01-24-2014, 01:03 AM
Registered User
 
FrameLayer's Avatar
 
Join Date: May 2013
Location: Compton ca
Age: 32
Posts: 665

User is: FrameLayer is offline
Re: By popular demand 1st gen sfbd on 22's

Wow wow wow wow wow wow wow wow wow wow wow wow wow wow wow wow

Sickest first gen ever.


Sent from AutoGuide.com Free App
FrameLayer is offline  
post #5 of 681 Old 01-24-2014, 07:08 AM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Thank you
I'll add pics when I get home

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #6 of 681 Old 01-24-2014, 07:31 AM
Registered User
 
84blaze's Avatar
 
Join Date: Dec 2008
Location: Edmonton, AB
Age: 27
Posts: 1,968

User is: 84blaze is offline
Re: By popular demand 1st gen sfbd on 22's

I've been waiting for this thread to pop up. I love first gens on smoothies
84blaze is offline  
post #7 of 681 Old 01-24-2014, 09:28 AM
Project 99 Problems
 
racermike450's Avatar
 
Join Date: Nov 2009
Location: Murfreesboro,TN
Age: 30
Posts: 1,083

User is: racermike450 is offline
Re: By popular demand 1st gen sfbd on 22's

Ill just leave these here. It has came along way.



We had fun striping this thing to bare metal.





racermike450 is offline  
post #8 of 681 Old 01-24-2014, 09:41 AM
Longbeds FTMFW
 
gunther19820's Avatar
 
Join Date: Feb 2010
Location: central NJ
Age: 37
Posts: 8,623

User is: gunther19820 is offline
Re: By popular demand 1st gen sfbd on 22's

looks great!

https://www.s10forum.com/forum/f143/p...nto-it-490214/<---- my body drop thread

Quote:
Originally Posted by aaronweisler View Post
I can one up the hummer
Quote:
Originally Posted by s10xtremist View Post
By blowing bubbles before you swallow?
gunther19820 is offline  
post #9 of 681 Old 01-24-2014, 11:52 AM
Registered User
 
mhilt13's Avatar
 
Join Date: Jan 2010
Location: Indianapolis, IN
Age: 34
Posts: 2,393

User is: mhilt13 is offline
Re: By popular demand 1st gen sfbd on 22's

Are you running a reverse 4 link with bag on upper bars?
mhilt13 is offline  
post #10 of 681 Old 01-24-2014, 12:02 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

No it's a 50/50 bag on upper bar

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #11 of 681 Old 01-24-2014, 12:04 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Quote:
Originally Posted by gunther19820 View Post
looks great!
Thanks Gunther

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #12 of 681 Old 01-24-2014, 12:51 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's


s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #13 of 681 Old 01-24-2014, 12:57 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's



Parts that are going in motor when I rebuild it

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #14 of 681 Old 01-24-2014, 01:00 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Old bed we scrapped

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #15 of 681 Old 01-24-2014, 01:17 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Chassis painted



s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #16 of 681 Old 01-24-2014, 02:34 PM
Project 99 Problems
 
racermike450's Avatar
 
Join Date: Nov 2009
Location: Murfreesboro,TN
Age: 30
Posts: 1,083

User is: racermike450 is offline
Re: By popular demand 1st gen sfbd on 22's

racermike450 is offline  
post #17 of 681 Old 01-24-2014, 02:39 PM
Project 99 Problems
 
racermike450's Avatar
 
Join Date: Nov 2009
Location: Murfreesboro,TN
Age: 30
Posts: 1,083

User is: racermike450 is offline
Re: By popular demand 1st gen sfbd on 22's

racermike450 is offline  
post #18 of 681 Old 01-24-2014, 03:16 PM
Longbeds FTMFW
 
gunther19820's Avatar
 
Join Date: Feb 2010
Location: central NJ
Age: 37
Posts: 8,623

User is: gunther19820 is offline
Re: By popular demand 1st gen sfbd on 22's

What is your plan to get to the inner mounting screws for the tail lights?

I was going to do a removable panel...

https://www.s10forum.com/forum/f143/p...nto-it-490214/<---- my body drop thread

Quote:
Originally Posted by aaronweisler View Post
I can one up the hummer
Quote:
Originally Posted by s10xtremist View Post
By blowing bubbles before you swallow?
gunther19820 is offline  
post #19 of 681 Old 01-24-2014, 03:27 PM
Project 99 Problems
 
racermike450's Avatar
 
Join Date: Nov 2009
Location: Murfreesboro,TN
Age: 30
Posts: 1,083

User is: racermike450 is offline
Re: By popular demand 1st gen sfbd on 22's

Quote:
Originally Posted by gunther19820 View Post
What is your plan to get to the inner mounting screws for the tail lights?

I was going to do a removable panel...
More than likely he will have to do it the same way I did magnetic screwdriver and reach up in there to put the screws in place in place.
racermike450 is offline  
post #20 of 681 Old 01-24-2014, 03:37 PM
Longbeds FTMFW
 
gunther19820's Avatar
 
Join Date: Feb 2010
Location: central NJ
Age: 37
Posts: 8,623

User is: gunther19820 is offline
Re: By popular demand 1st gen sfbd on 22's

Quote:
Originally Posted by racermike450 View Post
More than likely he will have to do it the same way I did magnetic screwdriver and reach up in there to put the screws in place in place.
never even though of that. Even if he can get to just the lower one, that beats a big removable panel like I was thinking

https://www.s10forum.com/forum/f143/p...nto-it-490214/<---- my body drop thread

Quote:
Originally Posted by aaronweisler View Post
I can one up the hummer
Quote:
Originally Posted by s10xtremist View Post
By blowing bubbles before you swallow?
gunther19820 is offline  
post #21 of 681 Old 01-24-2014, 04:07 PM
Project 99 Problems
 
racermike450's Avatar
 
Join Date: Nov 2009
Location: Murfreesboro,TN
Age: 30
Posts: 1,083

User is: racermike450 is offline
Re: By popular demand 1st gen sfbd on 22's

The lowers are easy its the tops that are a PITA.
racermike450 is offline  
post #22 of 681 Old 01-24-2014, 04:58 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's


Link bars and motor mounts painted doing rear end tomorrow

Got in on the last group buy thanks again Eric & Geat and everyone else who helped drop the price

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #23 of 681 Old 01-24-2014, 05:03 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Alum radiator mount I made at work

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #24 of 681 Old 01-24-2014, 05:14 PM
Project 99 Problems
 
racermike450's Avatar
 
Join Date: Nov 2009
Location: Murfreesboro,TN
Age: 30
Posts: 1,083

User is: racermike450 is offline
Re: By popular demand 1st gen sfbd on 22's





racermike450 is offline  
post #25 of 681 Old 01-24-2014, 06:36 PM
Registered User
 
84blaze's Avatar
 
Join Date: Dec 2008
Location: Edmonton, AB
Age: 27
Posts: 1,968

User is: 84blaze is offline
84blaze is offline  
post #26 of 681 Old 01-24-2014, 07:03 PM
Vandelay Industries
 
cruisinlows10's Avatar
 
Join Date: Oct 2004
Location: the sticks, virginia
Age: 38
Posts: 6,017

User is: cruisinlows10 is offline
Re: By popular demand 1st gen sfbd on 22's

I know I said it somewhere else on here, but I just love the use of the yota 22r and turbo to boot

it doesn't get eddie vedder than this
cruisinlows10 is offline  
post #27 of 681 Old 01-24-2014, 07:28 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Thanks to everyone for the positive words. More to come

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #28 of 681 Old 01-24-2014, 07:59 PM
Registered User
 
mhilt13's Avatar
 
Join Date: Jan 2010
Location: Indianapolis, IN
Age: 34
Posts: 2,393

User is: mhilt13 is offline
Re: By popular demand 1st gen sfbd on 22's

Those last toe pics looks killer. 22" smoothies look huge!!!
mhilt13 is offline  
post #29 of 681 Old 01-24-2014, 08:28 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Custom aluminum fuel cell I built at my work

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #30 of 681 Old 01-24-2014, 08:37 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

With hood closed

Stripped bed

Random picS


s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #31 of 681 Old 01-24-2014, 09:09 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's



s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #32 of 681 Old 01-24-2014, 09:47 PM
Vandelay Industries
 
cruisinlows10's Avatar
 
Join Date: Oct 2004
Location: the sticks, virginia
Age: 38
Posts: 6,017

User is: cruisinlows10 is offline
Re: By popular demand 1st gen sfbd on 22's

nice set of stands you have there

it doesn't get eddie vedder than this
cruisinlows10 is offline  
post #33 of 681 Old 01-24-2014, 11:18 PM
Registered User
 
Join Date: Oct 2013
Posts: 449

User is: skippycamper is offline
Re: By popular demand 1st gen sfbd on 22's

this project is a joy to follow--love it
skippycamper is offline  
post #34 of 681 Old 01-25-2014, 04:06 AM
Registered User
 
Chipride-slow.'s Avatar
 
Join Date: Nov 2009
Location: Wichita Falls TX
Age: 28
Posts: 4,282

User is: Chipride-slow. is offline
Re: By popular demand 1st gen sfbd on 22's

Josh hows the frame done? Im thinking of body droping mine

Daniel (Chip) Bagged Sonoma GT, 04 GMC ccsb 4/6 drop 22's, 99 4dr Blazer 4/6 drop baby cam 4.3, Setback Photography.
Hoopie rebuild.
https://www.s10forum.com/forum/f30/pr...hoopie-484569/
Chipride-slow. is offline  
post #35 of 681 Old 01-25-2014, 10:00 AM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Quote:
Originally Posted by Chipride-slow. View Post
Jon* hows the frame done? Im thinking of body droping mine
We put it on a frame jig built out of 3x3x1/4 and welded it level cut behing the front frame clip and added 2x3x3/16 same width as factory frame put body mounts on ect plated all joints with 3/16
Pics of transition

Kinda blurry

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #36 of 681 Old 01-25-2014, 10:23 AM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Can someone tell me why half my pics are gone I haven't made any changes to photobucket

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #37 of 681 Old 01-25-2014, 12:59 PM
Registered User
 
84blaze's Avatar
 
Join Date: Dec 2008
Location: Edmonton, AB
Age: 27
Posts: 1,968

User is: 84blaze is offline
Re: By popular demand 1st gen sfbd on 22's

Quote:
Originally Posted by stockfloordime View Post
Can someone tell me why half my pics are gone I haven't made any changes to photobucket
Sometimes they load and sometimes they don't.. It's weird.
84blaze is offline  
post #38 of 681 Old 01-26-2014, 11:13 AM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's





s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #39 of 681 Old 01-26-2014, 12:31 PM
Registered User
 
mhilt13's Avatar
 
Join Date: Jan 2010
Location: Indianapolis, IN
Age: 34
Posts: 2,393

User is: mhilt13 is offline
Re: By popular demand 1st gen sfbd on 22's

where did you get the bung and gas cap at for the alm tank?
mhilt13 is offline  
post #40 of 681 Old 01-26-2014, 12:51 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Quote:
Originally Posted by mhilt13 View Post
where did you get the bung and gas cap at for the alm tank?
It was left over from a project at work, but the have similar ones on eBay

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #41 of 681 Old 01-26-2014, 12:56 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Quote:
Originally Posted by cruisinlows10 View Post
nice set of stands you have there
If you like those you'll love this lol

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #42 of 681 Old 01-26-2014, 01:03 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

http://www.summitracing.com/parts/me...FZBj7AodUBcA-Q

This is almost identical

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #43 of 681 Old 01-26-2014, 08:28 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Pics of old Tacoma project




Some old b*%#h "thought she could make it across (in her truck of coarse)

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #44 of 681 Old 01-27-2014, 03:59 PM
Project 99 Problems
 
racermike450's Avatar
 
Join Date: Nov 2009
Location: Murfreesboro,TN
Age: 30
Posts: 1,083

User is: racermike450 is offline
Re: By popular demand 1st gen sfbd on 22's

Quote:
Originally Posted by stockfloordime View Post
If you like those you'll love this lol

My custom door stand works wonderful. Great for holding doors takes up minimal space.
racermike450 is offline  
post #45 of 681 Old 01-27-2014, 04:39 PM
Longbeds FTMFW
 
gunther19820's Avatar
 
Join Date: Feb 2010
Location: central NJ
Age: 37
Posts: 8,623

User is: gunther19820 is offline
Re: By popular demand 1st gen sfbd on 22's

^ that is ****ing brilliant

https://www.s10forum.com/forum/f143/p...nto-it-490214/<---- my body drop thread

Quote:
Originally Posted by aaronweisler View Post
I can one up the hummer
Quote:
Originally Posted by s10xtremist View Post
By blowing bubbles before you swallow?
gunther19820 is offline  
post #46 of 681 Old 01-27-2014, 05:22 PM
Project 99 Problems
 
racermike450's Avatar
 
Join Date: Nov 2009
Location: Murfreesboro,TN
Age: 30
Posts: 1,083

User is: racermike450 is offline
Re: By popular demand 1st gen sfbd on 22's

2'' and 2.25'' exhaust pipe, scrap 1x1 14 gauge, and a few bolts and nuts. fully adjustable.
racermike450 is offline  
post #47 of 681 Old 01-28-2014, 07:20 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Small bit of progress

Got link bars put together with all new bushings

Got comps mounted and valve sets mounted, running 2 400c's on a 5 gal

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #48 of 681 Old 01-29-2014, 09:33 AM
Project 99 Problems
 
racermike450's Avatar
 
Join Date: Nov 2009
Location: Murfreesboro,TN
Age: 30
Posts: 1,083

User is: racermike450 is offline
Re: By popular demand 1st gen sfbd on 22's

Now bags and some paint for control arms and it will be a full roller again!
racermike450 is offline  
post #49 of 681 Old 01-29-2014, 09:41 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Guess I'll repost some of the missing pics





New brakes


Motor in for moch up

Bed in progress

New motor parts


Mid and high amp

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
post #50 of 681 Old 01-29-2014, 09:45 PM Thread Starter
22RET Powwwa inside
 
stockfloordime's Avatar
 
Join Date: Sep 2007
Location: Murfreesboro tn
Age: 31
Posts: 1,354

User is: stockfloordime is offline
Re: By popular demand 1st gen sfbd on 22's

Got my gas tank clear coated tonight don't know how I feel about it just yet.

Also got my rear end and 4 link in

s10 project is back on the road
88 s10 sfbd on 22's
And my hood don't push up
.
Build thread https://www.s10forum.com/forum/f30/by...9/#post8901281
stockfloordime is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the S-10 Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address.


Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome