S-10 Forum banner

Reaction score
29

Profile posts Latest activity Discussions About

  • · Registered
    Joined
    ·
    3 Posts
    I have a 99 z28 I am going to do a s10 swap. I am going to us get a 96 - 2002 s10. So question is what all can I use from my camaro to do this swap. I will be using the motor and tans*

    · Registered
    Joined
    ·
    3 Posts
    I have a 99 z28 I am going to do a s10 swap. I am going to us get a 96 - 2002 s10. So question is what all can I use from my camaro to do this swap. I will be using the motor and tans**

    · Registered
    Joined
    ·
    164 Posts
    Hi Phil thank you for all your input I've searched for hours I wonder if you know the so answer , I have a 89 s10 blazer , I'm going to buy a truck 5.3 , I've seen only 1 photo from one guy saying that you can use the stock oil pan knot hinge the cross member but you can only use this on the 1st gen s10 blazer because the engine sits higher , ... Is this true , I'm trying to do a budget build

    · Premium Member
    Joined
    ·
    559 Posts
    hi Phil-
    Occurred to me that a good "sticky" in the LSx section might be a list of all the completed LSx swaps. Like year, model, "LS" engine description, transmission, state, when completed. I think you can keep a post open for editing so you could just keep adding to the list either from PM to you or replies. I think that might be a good resource. regards -C2

    · Ride or Die
    Joined
    ·
    576 Posts
    The trailblazer is nasty...It looks at me every time i log onto ebay. What side skirts are those?? They add a very nice "touch" to the body. Thanks,
    Nick

    · Registered
    Joined
    ·
    50 Posts
    I have been trying for a few days to register with gmtruckhq.com and i can not get past the spam verification section. I have tried every iteration of the letters of the phrase gmtruckhq.com and I'm stumped. I even had my wife try to decipher it. We feel dumb. I've been trying to find info on all modifications for installing lq9 with l92 heads in a 91 s10 blazer. I just want to register so I can check with more people like yourself on that site on how they did it, what works and doesnt work. Is there anyway you could help me out?
    Fannon/LT4BLAZER

    · Premium Member
    Joined
    ·
    3,891 Posts
    Not sure I can help. Some of those can't be used once they have programmed a specific vehicle. They are also very specific to certain years. In addition, you also need to make sure you are not getting a programmer with a stock program in it.

    · Registered
    Joined
    ·
    90 Posts
    I have a really urgent question, I am working with a guy trying to buy a programer from him, he wants $75 for it, it is a hypertech power programer and will fit my truck. Is it worth that much he was asking 160, it has the original box

    · Premium Member
    Joined
    ·
    3,891 Posts
    There is a thread dedicated to corvette wheels on the Wheels section. There are a lot of variables. Stock height vs lowered, tire sizes, type of truck, etc.

    · Under Construcktion!
    Joined
    ·
    361 Posts
    I was wondering because I just got the 2010 zo6 wheels 18s front and 19s rears and idk the specs on them. U know anything bout them? Wideness or back spacing or offset?

    · Premium Member
    Joined
    ·
    3,891 Posts
    4x4, 8.5x18" Corvette wheels (not Z06), 255/55x18" Nitto Tires, 1" spacer in the rear, stock height.

    · Under Construcktion!
    Joined
    ·
    361 Posts
    Hey I was wondering wat the specs on ur zo6 wheels are n the tire sizes' spacers and drop on ur blazer is?

    · Premium Member
    Joined
    ·
    3,891 Posts
    480 before the new TR Blower cam and CNC Patriot heads. Finishing it up in the next couple of weeks, then tweeking the tune and back to dyno. Hoping for at least 525.
    I'm running a very conservative tune on 91 octane.

    However, It merges into traffic very nicely!

    · 2 blazers, 300hp colorado
    Joined
    ·
    227 Posts
    alright, thanks phil, i appreciate it. Thats a slick rig you got there. What kinda power is it putting to the rear tires, if you dont mind me asking?
  • Loading…
  • Loading…
  • Loading…
Top