what exhaust are you running, and how much did you pay??

[JoPre]

like the title says im wondering what kinda exhaust set ups everyone is running and what they paid for everything. like how much for each part and how much for the labor.

[55mikey55]

headers, true duals all the way to a single flowmaster(no cat), dual outs with turndowns behind the wheels, sounds like a 350 from a v8 (at idle to 2500rpms).

[raven2510]

Quote: Originally Posted by 55mikey55

headers, true duals all the way to a single flowmaster(no cat), dual outs with turndowns behind the wheels, sounds like a 350 from a v8 (at idle to 2500rpms).

yea...sure it does. whatever helps you sleep at night

single in dual out to dual stainless 3" tips.....vforce muffler

[lowcherrydime]

spintech sportsmen street single in dual out with hiflow catco cat.

[neel2008]

custom leak from between cat and muffler, sounds pretty sweet on the ole 2.8.

[andrew69_04]

sanderson shorties, 2.5" duals, 4 magnaflow mufflers, out the back with magnaflow tips. headers, mufflers, tips and piping, cost about $900.
It sounds like a cam'd v8......wait......thats cuz it is

[70CHEVY327]

i ordered a cat form partstrain and it didnt fit so i cut it down to fit and cut the rear flange off of the old cat bolted it on and clamped on a galss pack and about 18" of pipe to clear the back of the cab. and i havnt pluged the o2 sensoer hole on the old flange so it sounds like a turbo spooling up when you get on it.

[bbcc]

Running 2.5" striaght pipe from the y pipe to a 50 series delta flow right behind the cab (extended cab). I used some mandrel bends to go over the axle and then turn out to stock location with a magnaflow oval tip. Sounds alright.....for a v6. Little to raspy for my taste, so a magnaflow cat is going in once I get motivated.

bbcc

[lt1s10onair]

mine also sounds like a cammed v8 lol..... lt1, t56, heads, cam, bolt ons, blah blah
-true duals w/ magnaflow hi flows (soon to be gutted lol) into dynomax ultraflo weldeds w/ turndowns..... maybe 850?

[MPETESS10]

it started out as a flowmaster 40 series single 3" in dual 2.5 out part number 402430 with duals out under the bumper with 3" chrome tips
had it done at a local exhaust shop for $280
then I cut the tailpipes off and ran turndowns
when the flow rotted out it got a thrush super turbo from advance auto parts for 25 bux and a turndown. its no where near as loud as the flow 40 but considering the fact I have a gutted cat and 4.10's, if the flow was on there I would be deaf after a couple hours on the highway
4.10's + 70mph = 3000+ rpms

[nd4spd18]

I've got a flowmaster 40, 2.5" from the cat back, turndown under the truck. Decently loud and sounds good, not as loud as it would be without the cat but I unfortunately live in one of the PA counties that has emissions.

Parts were about $150 labor was free since I had my buddy who is a welder do it

[russell]

Autozone special. welded before axle w/ turndown. $25

[cardboardbox]

Quote: Originally Posted by neel2008

custom leak from between cat and muffler, sounds pretty sweet on the ole 2.8.

[cardboardbox]

Right now: Nothing behind the cat.

After tomorrow night: FlowTech Afterburner 2.5'' in, 2.5'' out with a single turn down right before the axle.

[tohoopty]

2.2 with 40 series flowmaster,no cat and its run from the manifold all the way to the rear end. 90.00 dollars

[cardboardbox]

Quote: Originally Posted by cardboardbox

Right now: Nothing behind the cat.

After tomorrow night: FlowTech Afterburner 2.5'' in, 2.5'' out with a single turn down right before the axle.

Oh. And it's a 4.3 liter. $43 for the muffler. $70 for parts and labor.

[beandip]

2.2L 5 speed with Magnaflow High flow cat, Flowmaster original 40 series with a turndown.

I paid $150 for the high flow cat (stock cat is still good) and $130 for the flow.

[rentedmule]

custom bent 2.5" catback with a dynomax ultraflow muffler and custom tailpipe exiting in about the stock location - $350 all included.

[96blazer]

Quote: Originally Posted by andrew69_04

sanderson shorties, 2.5" duals, 4 magnaflow mufflers, out the back with magnaflow tips. headers, mufflers, tips and piping, cost about $900.
It sounds like a cam'd v8......wait......thats cuz it is

4 mufflers?

[The Blown Blazer]

2.25" y-pipe into single 2.5" with a stainless dynomax ultra flow. Cost me $430 otd.

[Joewee350]

From the headers back mine costs about 300. 150 for the 2 1/2 inch hooker aerochambers and 150 for piping from the headers to the bumper. Sound in sig.

[Svtzx555]

Hedman shorty headers, 2 1/2" true duals with flowmaster 40s, no cat and dumped before the axle. $50 for the headers used from a friend, $50 for both the flowmasters and $100 labor.

[mister880]

flowmaster 40 on the s10, had duals out the back - got it done for 450. bagged it and cut the tailpipes off. havn't got around to putting turndowns on it

flowmaster 40 on the silverado, duals comeing out of the corners of the bed.

[JoPre]

ok so i guess i didnt get the best deal but w/e **** it.

magna flow high flow cat, flowbastard muffler with 2.5 all the way back $350!

guess i shoulda done my reserch befor hand huh? oh well nothing i can do about it now. sounds good atleast.

[lowcherrydime]

$350? holy shit you got ripped off!

[Wicked Mayhem]

all stock exhaust system, with a new tailpipe ran to clear the drop.. 60 dollars. i love it, so quite. i cant believe people actually like 4.3's with exhaust, sounds like crap IMO. some sound fine idiling. but anything else is ugh.

[Obtuse]

Genuine GM, circa 1998.

[99street10]

2.2L Cherry Bomb Turbo II (OEM muffler was rotting off) $15 with my buddies discount, clamps were in my toolbox. Sounds decent, Not too obnoxious and nothing like a "tuner" car.

[chevyrules05]

$0 first cut off the muffler sounded bad ass

$80 then put a DinoMAX on with a dump off the muffler "best muffler ever" NOT! sounded like a honda

$0 cut off mufler again

$85 just put on a flow super40 and sounded pretty good with a dump off the muffler

soon a professional true duel

[charels]

edelbrock tes headers $130 (NEW) mr gasket cutout $50, punched out cat, stock 2.5"with oem muffler. cutout is right under the passenger door,

[WGPV8S10]

I welded, hung and bent it myself, this is for the '91 SBC truck
Headman shortie swap headers $25
2 1/4'' pipe $30
(2) Chamberd V-force mufflers $50
misc gaskets & hangers $layin around

total= $105

[88dimepa]

Custom side exit..on my 88 2.5
2 foot of 2 1/4" piping $15
1 45deg elbow $5
25" cherry bomb $10 with discount.
3 clamps $10
1 hanger $3
6 pack of miller light $6.50

So and hr of work and 6 beers later. Its not really that loud and it passes inspection in PA.

[mister880]

Quote: Originally Posted by inprogress10

$350? holy shit you got ripped off!

must be cheaper where you are, i paid 475$ for my exhaust (muffler and tail pipes 2.5 inch) on the s10. and 550$ for the exhaust on the silverado.