Post Audio/Video Clips Here

chevyistheway · 03-01-2009, 04:02 PM

Quote: Originally Posted by 03zq8s10

Here's one that's a lil' bit better.
Haha you can even hear the supercharger! Listen for it.

can u get a vid of your truck driving by i cant really hear its type of sound idk if its a bad camera or something else but im wonder wut that xpipe sounds like i was thinkin about putting one or an hpipe on mine
my truck is very loud now if i can get a way to post good quality vids i would show u

Dr. Steve · 03-04-2009, 12:11 PM

I want an X pipe but i wouldn't pass emissions here...

FouR_ThreE_Xtreme · 03-04-2009, 01:05 PM

^^ Ahh the beauty of living in a state with no emissions standards haha. I'm bout to run a side pipe off my current setup with my Y pipe and high-flow cat, no mufflers!

Dr. Steve · 03-04-2009, 04:10 PM

awesome Steve!

make sure you put up a sound clip!!!

FouR_ThreE_Xtreme · 03-04-2009, 05:12 PM

^^^ for sure, as soon as i can find someone to do it for the low. It really shouldn't be that expensive just to cut and bend some pipes, but my stepdad told me $300...i told him i'm takin it somewhere else.

Dr. Steve · 03-04-2009, 05:27 PM

hmm 300 is prolly right on for most places...

I would find a hole-in-the wall joint that may do it cheaper...

FouR_ThreE_Xtreme · 03-05-2009, 01:13 PM

really 300 bucks to just cut, bend, and weld some pipes? Danny's muffler shop down the road redid my brothers exhaust on hsi 86 caprice with new pipes and a flowmaster for like 120 bucks.

Dr. Steve · 03-05-2009, 04:27 PM

120 is a good price, our muffler shop in Trenton charges around 3-400 for most jobs though...

EddieKalil · 03-05-2009, 06:05 PM

Finally got a video up her yall go

http://www.youtube.com/watch?v=Haj9FcdR3_U

Dr. Steve · 03-05-2009, 07:06 PM

500 Internal Server Error

Sorry, something went wrong.

A team of highly trained monkeys has been dispatched to deal with this situation.
Also, please include the following information in your error report:

Dr. Steve · 03-05-2009, 07:06 PM

Eddie, You sir, Fail.

tiresmokinV8 · 03-05-2009, 07:10 PM

eddie sounds real good not raspy and doesnt pop, WHats your setup?

Dr. Steve · 03-05-2009, 08:50 PM

tiresmokinv8...I just misread your user name as treesmokinv8...

Bwhahhaah

FouR_ThreE_Xtreme · 03-05-2009, 10:40 PM

Quote: Originally Posted by stevehh

120 is a good price, our muffler shop in Trenton charges around 3-400 for most jobs though...

Yea but i mean just to cut and bend some pipes... Shouldnt be expensive at all. Might look into new tips too... i likes em shiney

and one of em has burnt urethane around the edge where my rollpan got pushed into my exhaust in a little accident.

EddieKalil · 03-06-2009, 12:51 AM

i have a hollowed out cat, 3 inch pipes into a flow master 40 series dumped before the rear axle. and why do i fail??

Dr. Steve · 03-06-2009, 03:08 PM

Quote: Originally Posted by EddieKalil

i have a hollowed out cat, 3 inch pipes into a flow master 40 series dumped before the rear axle. and why do i fail??

I couldn't access your site at that time to see the vid...

works now and sounds great man!

99_s10_Scott · 03-06-2009, 08:41 PM

Theres another soundclip of mine... spintech sportsman and high flow cat.

ps.. by the way dont pay attention to the end when i say" yo dawg" lol.. my friend beep my phone while i was trying to record the video.

EddieKalil · 03-07-2009, 12:04 AM

oh haha got ya.

sounds good man whats your set up like??

99_s10_Scott · 03-07-2009, 01:59 AM

Quote: Originally Posted by EddieKalil

oh haha got ya.

sounds good man whats your set up like??

thanks man... its just a high flow cat going into a 3inch single spintech sportsman dual 2.5 out with pipes out the sides....still dont have tips on it yet... trying to decide what kind i want to put on it first.

EddieKalil · 03-07-2009, 01:14 PM

hmm lol i don't have tips on my truck in that video but i recently ran the pipe the rest of the way back, i liked it better when it was dumped it sounded so awesome but i just couldn't handle how loud it was in the cab

99_s10_Scott · 03-07-2009, 01:31 PM

Quote: Originally Posted by EddieKalil

hmm lol i don't have tips on my truck in that video but i recently ran the pipe the rest of the way back, i liked it better when it was dumped it sounded so awesome but i just couldn't handle how loud it was in the cab

yeah before i had tailpipes put on it.. i was running straight muffler and i couldnt take the loudness inside either lol... i couldnt hear shit... i like it better now... sounds decent in my own opinion.

amwworks · 03-07-2009, 04:42 PM

http://www.youtube.com/watch?v=nP8AmMd0Jjo

travy · 03-07-2009, 08:16 PM

I'm going to get up a video of my Zr5 soon, hope you kids like it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

tiresmokinV8 · 03-07-2009, 09:11 PM

Exhaust Montage of my exhaust and Lifted97s-10

http://www.youtube.com/watch?v=R4Et2lpMGAg

Dr. Steve · 03-07-2009, 10:33 PM

coo travy coo

tt85_GM · 03-07-2009, 11:55 PM

Quote: Originally Posted by amwworks

http://www.youtube.com/watch?v=nP8AmMd0Jjo

sounds alright, not feelin the tips though, but to each their own

amwworks · 03-08-2009, 04:42 PM

Quote: Originally Posted by tt85_GM

sounds alright, not feelin the tips though, but to each their own

I'll be getting rid of that setup soon. Everythings starting to rust out on me.

Dr. Steve · 03-09-2009, 12:21 PM

I don't mind the those tips on a lifted ride

ZR2Mudslinger · 03-13-2009, 12:53 AM

http://www.youtube.com/watch?v=NtzXe...e=channel_page

that's mine, its a dumped v-force with a 3" opening. and i do have a catalytic.

Firefighter181 · 03-18-2009, 01:58 AM

Quote: Originally Posted by ZR2Mudslinger

http://www.youtube.com/watch?v=NtzXe...e=channel_page

that's mine, its a dumped v-force with a 3" opening. and i do have a catalytic.

That cat looked upset

S-10_man66 · 03-24-2009, 09:52 PM

Flowmaster Super 44 with Gutted Cat
http://www.youtube.com/watch?v=JRnuTaOaLNc

03zq8s10 · 03-25-2009, 06:54 PM

Recent video of mine. My truck is waaay loud! It can be heard alright but with it being so damn loud you can't really hear a good tone. I have a really nice camera and put it way back but here's what I got. Rolling video will be next then a flyby video.

chevyistheway · 03-25-2009, 07:52 PM

Quote: Originally Posted by 03zq8s10

Recent video of mine. My truck is waaay loud! It can be heard alright but with it being so damn loud you can't really hear a good tone. I have a really nice camera and put it way back but here's what I got. Rolling video will be next then a flyby video.

yea its way too loud...
for the camera
u should pull the truck out the garage and take the camera across the street, or maybe three house down or something

03S-dime_xtreme · 04-19-2009, 10:24 PM

Quote: Originally Posted by 99_s10_Scott

here is my new exhaust setup.. high flow cat into a 3inch/dual 2.5 out spintech sportsman have both tailpipes come out the sides... im not really to happy with it but eh. tell me what you think....

sounds pretty good man real deep tone i like. what dont u like about it?

99_s10_Scott · 04-20-2009, 03:25 PM

Quote: Originally Posted by 03S-dime_xtreme

sounds pretty good man real deep tone i like. what dont u like about it?

.. eh im not sure really man... it just seems to quiet for my taste... but thanks for the comment.

travy · 04-21-2009, 06:37 PM

01sdime01 · 04-26-2009, 01:01 PM

warm start, spintech sportsman street. 3 inch in, dual 2.5 inch out

01sdime01 · 04-26-2009, 01:02 PM

travy · 04-27-2009, 02:48 PM

firstgenon24s · 04-28-2009, 10:24 PM

heres mine

firstgenon24s · 04-28-2009, 10:29 PM

350 SBC 60 over,street/strip comp cam,hedman shorty headers,dual 2 1/2" straight pipes to moroso spiral mufflers with turndowns off the mufflers dumped right before the axle.First vid is kinda bad quality,second vid is a little bit better. http://s185.photobucket.com/albums/x...28-09_2021.flv

http://s185.photobucket.com/albums/x...27-09_1750.flv

dim_drvr · 04-29-2009, 03:22 AM

Quote: Originally Posted by chevyistheway

yea its way too loud...
for the camera
u should pull the truck out the garage and take the camera across the street, or maybe three house down or something

Probably the next county would be better! This is my favorite truck on the site now! This is what my exhaust is going to be when I get my tune in for the cat delete!

Now get them spintechs on man!

~~Gibson~~ · 05-27-2009, 11:42 PM

http://www.youtube.com/watch?v=ZFEndI7SXvg

JasonC · 06-08-2009, 12:44 AM

For some reason my 2.8 likes to idle like this sometimes. But i kind of like it. It has a single in dual out Flowmaster and no cat.

http://www.youtube.com/watch?v=aKtBgbDRZfE

Dr. Steve · 06-08-2009, 04:13 PM

Sounds good Jason...

Dr. Steve · 06-08-2009, 04:14 PM

Gibson, sounds good on that lil ole 4 banger man!

Licenseplate · 06-09-2009, 03:15 AM

Quote: Originally Posted by JasonC

For some reason my 2.8 likes to idle like this sometimes. But i kind of like it. It has a single in dual out Flowmaster and no cat.

http://www.youtube.com/watch?v=aKtBgbDRZfE

mines does that all the time, except mines carbed, dunno if that would make a difference. headers, si/so flow 40, hiflow cat

~~Gibson~~ · 06-10-2009, 11:52 PM

Quote: Originally Posted by stevehh

Gibson, sounds good on that lil ole 4 banger man!

its okay, ints not loud enough though, i gutted the muffelr today, and it sounfs like shit, it was only 20 bucks though

Dr. Steve · 06-11-2009, 12:25 AM

well thats a good way to look at it, LOLz

Dr. Steve · 06-11-2009, 12:26 AM

Here is my RASPY.....NASTY ass SHIT with no muffs, just highflow cat and JBA headers...

03-01-2009, 04:02 PM	#401
chevyistheway Registered User Age: 24 Join Date: Dec 2007 Posts: 314 Location: asheboro nc User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 03zq8s10 Here's one that's a lil' bit better. Haha you can even hear the supercharger! Listen for it. can u get a vid of your truck driving by i cant really hear its type of sound idk if its a bad camera or something else but im wonder wut that xpipe sounds like i was thinkin about putting one or an hpipe on mine my truck is very loud now if i can get a way to post good quality vids i would show u
	[Reply w/Quote]

03-04-2009, 12:11 PM	#402
Dr. Steve Need a script? Age: 27 Join Date: May 2006 Posts: 11,278 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: Online	Re: Post Audio/Video Clips Here I want an X pipe but i wouldn't pass emissions here...
	[Reply w/Quote]

03-04-2009, 01:05 PM	#403
FouR_ThreE_Xtreme bowties in my bloodstream Age: 19 Join Date: Dec 2008 Posts: 867 Location: Greenville, SC User is: OffLine	Re: Post Audio/Video Clips Here ^^ Ahh the beauty of living in a state with no emissions standards haha. I'm bout to run a side pipe off my current setup with my Y pipe and high-flow cat, no mufflers!
	[Reply w/Quote]

03-04-2009, 04:10 PM	#404
Dr. Steve Need a script? Age: 27 Join Date: May 2006 Posts: 11,278 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: Online	Re: Post Audio/Video Clips Here awesome Steve! make sure you put up a sound clip!!!
	[Reply w/Quote]

03-04-2009, 05:12 PM	#405
FouR_ThreE_Xtreme bowties in my bloodstream Age: 19 Join Date: Dec 2008 Posts: 867 Location: Greenville, SC User is: OffLine	Re: Post Audio/Video Clips Here ^^^ for sure, as soon as i can find someone to do it for the low. It really shouldn't be that expensive just to cut and bend some pipes, but my stepdad told me $300...i told him i'm takin it somewhere else.
	[Reply w/Quote]

03-04-2009, 05:27 PM	#406
Dr. Steve Need a script? Age: 27 Join Date: May 2006 Posts: 11,278 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: Online	Re: Post Audio/Video Clips Here hmm 300 is prolly right on for most places... I would find a hole-in-the wall joint that may do it cheaper...
	[Reply w/Quote]

03-05-2009, 01:13 PM	#407
FouR_ThreE_Xtreme bowties in my bloodstream Age: 19 Join Date: Dec 2008 Posts: 867 Location: Greenville, SC User is: OffLine	Re: Post Audio/Video Clips Here really 300 bucks to just cut, bend, and weld some pipes? Danny's muffler shop down the road redid my brothers exhaust on hsi 86 caprice with new pipes and a flowmaster for like 120 bucks.
	[Reply w/Quote]

03-05-2009, 04:27 PM	#408
Dr. Steve Need a script? Age: 27 Join Date: May 2006 Posts: 11,278 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: Online	Re: Post Audio/Video Clips Here 120 is a good price, our muffler shop in Trenton charges around 3-400 for most jobs though...
	[Reply w/Quote]

03-05-2009, 06:05 PM	#409
EddieKalil Registered User Age: 19 Join Date: Feb 2009 Posts: 15 Location: User is: OffLine	Re: Post Audio/Video Clips Here Finally got a video up her yall go http://www.youtube.com/watch?v=Haj9FcdR3_U
	[Reply w/Quote]

03-05-2009, 07:06 PM	#410
Dr. Steve Need a script? Age: 27 Join Date: May 2006 Posts: 11,278 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: Online	Re: Post Audio/Video Clips Here 500 Internal Server Error Sorry, something went wrong. A team of highly trained monkeys has been dispatched to deal with this situation. Also, please include the following information in your error report:
	[Reply w/Quote]

03-05-2009, 07:06 PM	#411
Dr. Steve Need a script? Age: 27 Join Date: May 2006 Posts: 11,278 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: Online	Re: Post Audio/Video Clips Here Eddie, You sir, Fail.
	[Reply w/Quote]

03-05-2009, 07:10 PM	#412
tiresmokinV8 Not so Avg Age: 23 Join Date: Nov 2007 Posts: 903 Location: Cuy. Falls, OH User is: OffLine	Re: Post Audio/Video Clips Here eddie sounds real good not raspy and doesnt pop, WHats your setup?
	[Reply w/Quote]

03-05-2009, 08:50 PM	#413
Dr. Steve Need a script? Age: 27 Join Date: May 2006 Posts: 11,278 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: Online	Re: Post Audio/Video Clips Here tiresmokinv8...I just misread your user name as treesmokinv8... Bwhahhaah
	[Reply w/Quote]

03-05-2009, 10:40 PM	#414
FouR_ThreE_Xtreme bowties in my bloodstream Age: 19 Join Date: Dec 2008 Posts: 867 Location: Greenville, SC User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by stevehh 120 is a good price, our muffler shop in Trenton charges around 3-400 for most jobs though... Yea but i mean just to cut and bend some pipes... Shouldnt be expensive at all. Might look into new tips too... i likes em shiney and one of em has burnt urethane around the edge where my rollpan got pushed into my exhaust in a little accident.
	[Reply w/Quote]

03-06-2009, 12:51 AM	#415
EddieKalil Registered User Age: 19 Join Date: Feb 2009 Posts: 15 Location: User is: OffLine	Re: Post Audio/Video Clips Here i have a hollowed out cat, 3 inch pipes into a flow master 40 series dumped before the rear axle. and why do i fail??
	[Reply w/Quote]

03-06-2009, 03:08 PM	#416
Dr. Steve Need a script? Age: 27 Join Date: May 2006 Posts: 11,278 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: Online	Re: Post Audio/Video Clips Here Quote: Originally Posted by EddieKalil i have a hollowed out cat, 3 inch pipes into a flow master 40 series dumped before the rear axle. and why do i fail?? I couldn't access your site at that time to see the vid... works now and sounds great man!
	[Reply w/Quote]

03-06-2009, 08:41 PM	#417
99_s10_Scott Registered User Join Date: May 2006 Posts: 600 Location: Charlotte North Carolina User is: OffLine	Re: Post Audio/Video Clips Here Theres another soundclip of mine... spintech sportsman and high flow cat. ps.. by the way dont pay attention to the end when i say" yo dawg" lol.. my friend beep my phone while i was trying to record the video. Last edited by 99_s10_Scott : 03-06-2009 at 08:43 PM.
	[Reply w/Quote]

03-07-2009, 12:04 AM	#418
EddieKalil Registered User Age: 19 Join Date: Feb 2009 Posts: 15 Location: User is: OffLine	Re: Post Audio/Video Clips Here oh haha got ya. sounds good man whats your set up like??
	[Reply w/Quote]

03-07-2009, 01:59 AM	#419
99_s10_Scott Registered User Join Date: May 2006 Posts: 600 Location: Charlotte North Carolina User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by EddieKalil oh haha got ya. sounds good man whats your set up like?? thanks man... its just a high flow cat going into a 3inch single spintech sportsman dual 2.5 out with pipes out the sides....still dont have tips on it yet... trying to decide what kind i want to put on it first.
	[Reply w/Quote]

03-07-2009, 01:14 PM	#420
EddieKalil Registered User Age: 19 Join Date: Feb 2009 Posts: 15 Location: User is: OffLine	Re: Post Audio/Video Clips Here hmm lol i don't have tips on my truck in that video but i recently ran the pipe the rest of the way back, i liked it better when it was dumped it sounded so awesome but i just couldn't handle how loud it was in the cab
	[Reply w/Quote]

03-07-2009, 01:31 PM	#421
99_s10_Scott Registered User Join Date: May 2006 Posts: 600 Location: Charlotte North Carolina User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by EddieKalil hmm lol i don't have tips on my truck in that video but i recently ran the pipe the rest of the way back, i liked it better when it was dumped it sounded so awesome but i just couldn't handle how loud it was in the cab yeah before i had tailpipes put on it.. i was running straight muffler and i couldnt take the loudness inside either lol... i couldnt hear shit... i like it better now... sounds decent in my own opinion.
	[Reply w/Quote]

03-07-2009, 04:42 PM	#422
amwworks I'm Just Here Age: 22 Join Date: Jan 2009 Posts: 96 Location: Southeast, MI User is: OffLine	Re: Post Audio/Video Clips Here http://www.youtube.com/watch?v=nP8AmMd0Jjo
	[Reply w/Quote]

03-07-2009, 08:16 PM	#423
travy Megabyte Age: 23 Join Date: Sep 2006 Posts: 7,652 Location: Vancouver, WA User is: OffLine	Re: Post Audio/Video Clips Here I'm going to get up a video of my Zr5 soon, hope you kids like it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	[Reply w/Quote]

03-07-2009, 09:11 PM	#424
tiresmokinV8 Not so Avg Age: 23 Join Date: Nov 2007 Posts: 903 Location: Cuy. Falls, OH User is: OffLine	Re: Post Audio/Video Clips Here Exhaust Montage of my exhaust and Lifted97s-10 http://www.youtube.com/watch?v=R4Et2lpMGAg
	[Reply w/Quote]

03-07-2009, 10:33 PM	#425
Dr. Steve Need a script? Age: 27 Join Date: May 2006 Posts: 11,278 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: Online	Re: Post Audio/Video Clips Here coo travy coo
	[Reply w/Quote]

03-07-2009, 11:55 PM	#426
tt85_GM I AM CANADIAN Age: 24 Join Date: Feb 2006 Posts: 5,337 Location: Ont. Canada User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by amwworks http://www.youtube.com/watch?v=nP8AmMd0Jjo sounds alright, not feelin the tips though, but to each their own
	[Reply w/Quote]

03-08-2009, 04:42 PM	#427
amwworks I'm Just Here Age: 22 Join Date: Jan 2009 Posts: 96 Location: Southeast, MI User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by tt85_GM sounds alright, not feelin the tips though, but to each their own I'll be getting rid of that setup soon. Everythings starting to rust out on me.
	[Reply w/Quote]

03-09-2009, 12:21 PM	#428
Dr. Steve Need a script? Age: 27 Join Date: May 2006 Posts: 11,278 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: Online	Re: Post Audio/Video Clips Here I don't mind the those tips on a lifted ride
	[Reply w/Quote]

03-13-2009, 12:53 AM	#429
ZR2Mudslinger Registered User Age: 20 Join Date: Dec 2008 Posts: 14 Location: Marietta, Ohio User is: OffLine	Re: Post Audio/Video Clips Here http://www.youtube.com/watch?v=NtzXe...e=channel_page that's mine, its a dumped v-force with a 3" opening. and i do have a catalytic.
	[Reply w/Quote]

03-18-2009, 01:58 AM	#430
Firefighter181 I tell cops where to go! Age: 33 Join Date: Oct 2008 Posts: 15 Location: Lakeville, Mn User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by ZR2Mudslinger http://www.youtube.com/watch?v=NtzXe...e=channel_page that's mine, its a dumped v-force with a 3" opening. and i do have a catalytic. That cat looked upset
	[Reply w/Quote]

03-24-2009, 09:52 PM	#431
S-10_man66 Nevada: Hookers & Poker Age: 19 Join Date: Jun 2008 Posts: 839 Location: Bellevue,NE User is: OffLine	Re: Post Audio/Video Clips Here Flowmaster Super 44 with Gutted Cat http://www.youtube.com/watch?v=JRnuTaOaLNc
	[Reply w/Quote]

03-25-2009, 06:54 PM	#432
03zq8s10 Got boost? Age: 22 Join Date: Mar 2007 Posts: 804 Location: Killen, Alabama User is: OffLine	Re: Post Audio/Video Clips Here Recent video of mine. My truck is waaay loud! It can be heard alright but with it being so damn loud you can't really hear a good tone. I have a really nice camera and put it way back but here's what I got. Rolling video will be next then a flyby video.
	[Reply w/Quote]

03-25-2009, 07:52 PM	#433
chevyistheway Registered User Age: 24 Join Date: Dec 2007 Posts: 314 Location: asheboro nc User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 03zq8s10 Recent video of mine. My truck is waaay loud! It can be heard alright but with it being so damn loud you can't really hear a good tone. I have a really nice camera and put it way back but here's what I got. Rolling video will be next then a flyby video. yea its way too loud... for the camera u should pull the truck out the garage and take the camera across the street, or maybe three house down or something
	[Reply w/Quote]

04-19-2009, 10:24 PM	#434
03S-dime_xtreme 28Hz Age: 26 Join Date: Nov 2008 Posts: 160 Location: Joliet, IL User is: Online	Re: Post Audio/Video Clips Here Quote: Originally Posted by 99_s10_Scott here is my new exhaust setup.. high flow cat into a 3inch/dual 2.5 out spintech sportsman have both tailpipes come out the sides... im not really to happy with it but eh. tell me what you think.... sounds pretty good man real deep tone i like. what dont u like about it?
	[Reply w/Quote]

04-20-2009, 03:25 PM	#435
99_s10_Scott Registered User Join Date: May 2006 Posts: 600 Location: Charlotte North Carolina User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 03S-dime_xtreme sounds pretty good man real deep tone i like. what dont u like about it? .. eh im not sure really man... it just seems to quiet for my taste... but thanks for the comment.
	[Reply w/Quote]