Post Audio/Video Clips Here

JasonC · 02-14-2008, 04:27 AM

Here's mine with a stock 2.8, 2 1/4" exhaust with no cat, single in, dual outlet 40 series Flowmaster.

http://www.youtube.com/watch?v=ieXQdoYNuCk

Scrat · 02-19-2008, 09:13 PM

Truck is a 2001 x with the 2.2L. i'm running a thrush turbo muffler on mine right now with 2.25 inlet and outlet in stock location and stock piping. took video with digital camera so it doesnt pick up the low tones all that well, but in person its alittle deeper. couldnt rev up all the way either due to the rev limiter at 4k. i will get more vids later on while driving and such.
http://s65.photobucket.com/albums/h2...urrent=009.flv

9sonoma5 · 02-24-2008, 11:57 AM

I have a 95 2.2l Sonoma and im running a glass pack, with high flow cat and 2.25 piping.

Also AEM cai.

Theres a couple throwdowns. Yeah i redlined a couple times so what? ha

9sonoma5 · 02-24-2008, 11:58 AM

Let me know what you think

MikDee · 02-24-2008, 04:23 PM

Quote: Originally Posted by 9sonoma5

Let me know what you think

Well for a 4cyl, it sounds good, pretty deep, and raspy,,, but not ricey.

tippmann243 · 02-24-2008, 09:37 PM

89 s10 blazer

94 tbi 350 with an lt1 cam
everything else is stock motor had 133,xxx on it
sanderson shortie headers
hand made true duals 2.5" dumped before the rear axle
powerstick mufflers

<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i224.photobucket.com/player.s...r/HPIM0494.flv">

sorry my camera sucks

MikDee · 02-26-2008, 09:29 AM

Cool, Sounds like a coffee grinder

tippmann243 · 02-29-2008, 10:29 PM

Quote: Originally Posted by MikDee

Cool, Sounds like a coffee grinder

that was right after the motor sawp.

i was still on 4.3 injectors and a 4.3 tune

here are a couple more after i got some bugs worked out

http://s224.photobucket.com/albums/d...t=HPIM0543.flv

http://s224.photobucket.com/albums/d...t=HPIM0542.flv

again sorry for the shitty camera noise. dunno what the deal is with that thing

Licenseplate · 03-06-2008, 01:21 AM

2.8, only headers

llorracs93s10 · 03-06-2008, 07:40 PM

http://s257.photobucket.com/albums/h...t=100_4311.flv

http://s257.photobucket.com/albums/h...t=100_4310.flv

http://s257.photobucket.com/albums/h...t=100_4309.flv

93 s10 2.8 5spd. has a magnaflow highflow cat, 3 inch headpipe, flowmaster 40series muffler to a custom y pipe, and 2.25 piping from muffler outlet back.

Let me know what you think.

MINTSICK · 03-06-2008, 09:49 PM

^^ sounds great, I had essentially the same setup on my first truck a 92 2.8/5spd, sounds identical!

llorracs93s10 · 03-06-2008, 11:09 PM

Quote: Originally Posted by MINTSICK

^^ sounds great, I had essentially the same setup on my first truck a 92 2.8/5spd, sounds identical!

i have a video of me off the line and when i hit third gear, that muffler for sum reason made it sound like a v8, or atleast not a v6

. But unfortunatly its on a cam corder camera, so i cant unpload it

rennat_2006 · 03-23-2008, 05:29 PM

Magnaflow high flow cat with 3" pipe between cat and a 3" inlet and outlet Hooker Maxflow muffler with a 3" tailpipe exiting in the stock location with no tip.
This was taken like 50 miles after install, It has became a little louder and deeper since this video. I would definetely recomend this setup to someone who wants to hear their exhaust but doesnt want all of the noise of a 40 series flowmaster.
2000 4.3l zr2 Blazer
http://s201.photobucket.com/albums/a...haustVideo.flv

02_Black_XBlazer · 03-23-2008, 11:12 PM

^^^
Could it be? An actual Maxflow clip, finally? Sweet.

rennat_2006 · 03-23-2008, 11:21 PM

Quote: Originally Posted by 97NAS10SS

^^^
Could it be? An actual Maxflow clip, finally? Sweet.

It sure is!

Nice to see something besides another Flowmaster huh

tt85_GM · 03-24-2008, 12:43 AM

Nice but you need a close up of it idling.

rennat_2006 · 03-24-2008, 01:00 AM

If my little brother wouldnt have dropped my digital camera on the asphalt after the driveby part then i would be happy too. The screen is shattered and the zoom deal is stuck in, When you turn it on it lights up, beeps, then shuts itself off.

When i get a new camera(hopefully fairly soon) i will make another set of videos with how it sound now that it is broken in.

DoItBiG · 03-25-2008, 03:20 PM

Here is mine. I did this with my phone..

40 Series single in/dual out 3"tips. The set up is on my cardomain page. Link is in the signature.

Brutus2TheMax · 03-25-2008, 07:07 PM

I have those same tips in 3.5x8. I love em'! Sounds good man.

1fast4by · 03-25-2008, 10:58 PM

Crappy cell phone vid

Video Clip 1 (0.05 MB) Play

DoItBiG · 03-26-2008, 02:24 AM

Quote: Originally Posted by Brutus2TheMax

I have those same tips in 3.5x8. I love em'! Sounds good man.

It definately sounds nice with those tips. Nice, deep sound.

Brutus2TheMax · 03-28-2008, 11:34 PM

I was actually very surprised at how much SS exhaust tips change the tone of the exhaust. Makes it deeper and not as raspy. SURPRISE!

llorracs93s10 · 03-31-2008, 01:27 PM

My buddy's 03 s10 -->4.3 eliminated the first cat, replaced other cat with highflow cat, got a single inlet/dual outlet flowmaster 40 series, and 2.25 in piping out infront of the rear tire.

Dr. Steve · 04-04-2008, 11:16 AM

My old exhaust that is going bye byes...

It has this ridiculous tip on it.

It is a 50 series delta flow 2.5" piping out the rear.

beandip · 04-07-2008, 12:52 PM

well i just got a new high flow cat and it completely changed how my exhaust sounds (i kept the stock cat, its still good)

sorry both videos have been done with a digital camera so it cant pick up the deep tones and the microphone isnt the best.

stock cat with flowmaster 40 series, 2.2L engine

Magnaflow high flow cat with flowmaster 40 series, 2.2L

Note: with the new high flow cat it does sound more of a 4 cylinder at 3200+ rpm, but definitely made the muffler sound more "hollow" and of course made it louder, either way its still a 4 cylinder.

tell me what you think, im still debating whether or not of getting a magnaflow muffler but im not in any rush yet.

badaSS98 · 04-10-2008, 07:36 PM

Since you have a 4 cylinder, I would buy a resonator to put in before the muffler, that will make it sound a lot smoother.. Sounds more like a flowmaster now with the high flow cat.. Tinny

Jay

badaSS98 · 04-10-2008, 08:22 PM

Damn, it's amazing that the 2.8 sounds just as good and better than some 4.3's.. haha.. Flowmaster stays in business because of this site. I thought the mustang guys were bad.. haha.

Jay

2wd99 · 04-15-2008, 08:25 AM

2.2, stock everything, flowmaster 40, dumped before rear right tire for minimal tailpipe

http://smg.photobucket.com/albums/v4...t=DSCN4353.flv

s106banger · 04-16-2008, 10:23 PM

2.5" cat-back with Edelbrock SDT muffler straight out the back.
http://youtube.com/watch?v=0WwZD1dtYkE

Joey43 · 04-17-2008, 09:19 PM

Here's a new clip I just did today. I made it on my way to work; the camera was in the passenger seat and the drivers window was all the way down.

2.2 with a 40 series.

02_Black_XBlazer · 04-28-2008, 12:06 AM

Found this guy on Youtube....Not a Dime, but a veritable cornucopia of exhaust options for the 4.3. He's even got one of those goofy Stylin Concepts tips that people ask about sometimes.

http://www.youtube.com/watch?v=GL2pzTAjqR4

CalmLikeABomb · 05-01-2008, 05:47 PM

short exhaust clip, Flowtech afterburner 2 1/2 in 2 1/2 out

http://videos.streetfire.net/video/S...lip_159583.htm

The Griff · 05-01-2008, 05:51 PM

With headers closed -

With headers open -

4UH8Rs · 05-15-2008, 05:03 AM

does anybody know how i can make my exhaust sound deep and low?
i watched most of your videos and hard to determine.
i got a 4.3L blazer w/ aem intake mod only. i was thinking flowmaster 40 or 44, single or dual out, and/or with or without cat......thanks

4UH8Rs · 05-15-2008, 05:04 AM

sorry double post

s106banger · 05-15-2008, 07:57 PM

Quote: Originally Posted by 4UH8Rs

does anybody know how i can make my exhaust sound deep and low?
i watched most of your videos and hard to determine.
i got a 4.3L blazer w/ aem intake mod only. i was thinking flowmaster 40 or 44, single or dual out, and/or with or without cat......thanks

search listen search some more. thats such an open ended question, i hate it.

javojjaaf · 05-18-2008, 08:53 AM

my 98' envoy 4.3L with a 14" Magnaflow single in/out with a rectangle tip...

http://ca.youtube.com/watch?v=NxJQLRbatlA

Licenseplate · 05-26-2008, 05:02 PM

85 2.8
2 1/4", dynomax hi flow
flowmaster 40 delta

http://www.youtube.com/watch?v=-x08UHCDRs0

JasonC · 05-30-2008, 11:54 PM

Quote: Originally Posted by Licenseplate

85 2.8
2 1/4", dynomax hi flow
flowmaster 40 delta

http://www.youtube.com/watch?v=-x08UHCDRs0

I went ahead and made a comment on there about how good it sounded

Licenseplate · 05-31-2008, 03:28 AM

i love its idle
and while cruising at low rpms you can really hear the headers

likaroc13 · 06-24-2008, 12:10 AM

finally got a clip of mine:

1988 S-10 Blazer
stock 4.3 V-6 TBI
2.5" single in/out Hooker MaxFlow
2.5" Catco direct fit converter

Renegade_Z · 06-28-2008, 11:02 PM

Heres mine. 03 S10 stock 4.3 with a cherry bomb catback exhaust.

http://videos.streetfire.net/video/C...-03_168644.htm

1sic03x · 07-14-2008, 08:42 PM

http://www.youtube.com/watch?v=rnZe_...eature=related

Single in Single Out Flowmaster 40's ... With a bit of an exhaust leak...

MikDee · 07-15-2008, 10:01 AM

Quote: Originally Posted by Renegade_Z

Heres mine. 03 S10 stock 4.3 with a cherry bomb catback exhaust.

http://videos.streetfire.net/video/C...-03_168644.htm

Linky, no worky? On my end anyway?

renegadeoflove · 07-15-2008, 06:00 PM

Heres my 2000 4 cylinder wit flowmasters on it.
http://videos.streetfire.net/video/m...ust_171793.htm

slvrs10 · 07-21-2008, 07:49 PM

4.3 with a Spintech Prostreet. 2.5" in, 2.5" out. Single pipe bent out the side, in front of the rear passenger tire. Enjoy.

02_Black_XBlazer · 07-22-2008, 10:08 PM

'nother Spintech clip here too. Sportsman 3" in, dual 2 1/4" out.

http://videos.streetfire.net/video/S...man_173166.htm

556mm · 07-23-2008, 05:40 AM

Quote: Originally Posted by 97_S-10SS

'nother Spintech clip here too. Sportsman 3" in, dual 2 1/4" out.

http://videos.streetfire.net/video/S...man_173166.htm

man i gotta get me a new y pipe! sounds awesome ben! aren't you glad you converted

MikDee · 07-23-2008, 11:22 AM

Quote: Originally Posted by 97_S-10SS

'nother Spintech clip here too. Sportsman 3" in, dual 2 1/4" out.

http://videos.streetfire.net/video/S...man_173166.htm

From one pipefitter/welder to another, Sounds Awesome! How's about a few drive by clips? So we all can Drool some more,,,

02_Black_XBlazer · 07-23-2008, 03:31 PM

Quote: Originally Posted by MikDee

From one pipefitter/welder to another, Sounds Awesome! How's about a few drive by clips? So we all can Drool some more,,,

I did have a few, but the wind noise was horrible, and they didn't come out well at all. I gotta make a temporary camera mount or something inside the cab...I'll def have some drive-off/drive-by/drive-around/drive-thru shots in the next couple of days.

Oh, and ..Yes, Eric, i love it. They're everything I liked about the sound of Flows but with the extar, I dunno, "grunt" that the Flows were/are missing.

02-14-2008, 04:27 AM	#201
JasonC Registered User Age: 30 Join Date: Feb 2008 Posts: 131 Location: Beans Cove, PA & Cumberland MD User is: OffLine	Re: Post Audio/Video Clips Here Here's mine with a stock 2.8, 2 1/4" exhaust with no cat, single in, dual outlet 40 series Flowmaster. http://www.youtube.com/watch?v=ieXQdoYNuCk
	[Reply w/Quote]

02-19-2008, 09:13 PM	#202
Scrat KeepDreaminXtreme Age: 26 Join Date: Aug 2005 Posts: 1,496 Location: NJ User is: OffLine	Re: Post Audio/Video Clips Here Truck is a 2001 x with the 2.2L. i'm running a thrush turbo muffler on mine right now with 2.25 inlet and outlet in stock location and stock piping. took video with digital camera so it doesnt pick up the low tones all that well, but in person its alittle deeper. couldnt rev up all the way either due to the rev limiter at 4k. i will get more vids later on while driving and such. http://s65.photobucket.com/albums/h2...urrent=009.flv
	[Reply w/Quote]

02-24-2008, 11:57 AM	#203
9sonoma5 Registered User Age: 21 Join Date: Dec 2007 Posts: 43 Location: User is: OffLine	Re: Post Audio/Video Clips Here I have a 95 2.2l Sonoma and im running a glass pack, with high flow cat and 2.25 piping. Also AEM cai. Theres a couple throwdowns. Yeah i redlined a couple times so what? ha Last edited by 9sonoma5 : 02-24-2008 at 12:00 PM.
	[Reply w/Quote]

02-24-2008, 11:58 AM	#204
9sonoma5 Registered User Age: 21 Join Date: Dec 2007 Posts: 43 Location: User is: OffLine	Re: Post Audio/Video Clips Here Let me know what you think
	[Reply w/Quote]

02-24-2008, 04:23 PM	#205
MikDee Registered User Join Date: Jan 2007 Posts: 635 Location: Milford, Pa. User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 9sonoma5 Let me know what you think Well for a 4cyl, it sounds good, pretty deep, and raspy,,, but not ricey.
	[Reply w/Quote]

02-24-2008, 09:37 PM	#206
tippmann243 the youngest has been Age: 22 Join Date: Jul 2004 Posts: 3,200 Location: FLORISSANT MO User is: OffLine	Re: Post Audio/Video Clips Here 89 s10 blazer 94 tbi 350 with an lt1 cam everything else is stock motor had 133,xxx on it sanderson shortie headers hand made true duals 2.5" dumped before the rear axle powerstick mufflers <embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i224.photobucket.com/player.s...r/HPIM0494.flv"> sorry my camera sucks
	[Reply w/Quote]

02-26-2008, 09:29 AM	#207
MikDee Registered User Join Date: Jan 2007 Posts: 635 Location: Milford, Pa. User is: OffLine	Re: Post Audio/Video Clips Here Cool, Sounds like a coffee grinder
	[Reply w/Quote]

02-29-2008, 10:29 PM	#208
tippmann243 the youngest has been Age: 22 Join Date: Jul 2004 Posts: 3,200 Location: FLORISSANT MO User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by MikDee Cool, Sounds like a coffee grinder that was right after the motor sawp. i was still on 4.3 injectors and a 4.3 tune here are a couple more after i got some bugs worked out http://s224.photobucket.com/albums/d...t=HPIM0543.flv http://s224.photobucket.com/albums/d...t=HPIM0542.flv again sorry for the shitty camera noise. dunno what the deal is with that thing
	[Reply w/Quote]

03-06-2008, 01:21 AM	#209
Licenseplate baby blue Age: 20 Join Date: Sep 2006 Posts: 712 Location: BC, Canada User is: OffLine	Re: Post Audio/Video Clips Here 2.8, only headers
	[Reply w/Quote]

03-06-2008, 07:40 PM	#210
llorracs93s10 Registered User Age: 22 Join Date: Jun 2007 Posts: 4,569 Location: Middletown, DE User is: OffLine	Re: Post Audio/Video Clips Here http://s257.photobucket.com/albums/h...t=100_4311.flv http://s257.photobucket.com/albums/h...t=100_4310.flv http://s257.photobucket.com/albums/h...t=100_4309.flv 93 s10 2.8 5spd. has a magnaflow highflow cat, 3 inch headpipe, flowmaster 40series muffler to a custom y pipe, and 2.25 piping from muffler outlet back. Let me know what you think.
	[Reply w/Quote]

03-06-2008, 09:49 PM	#211
MINTSICK Akerfeldt Age: 27 Join Date: Oct 2003 Posts: 11,472 Location: Danvers, Ma User is: OffLine	Re: Post Audio/Video Clips Here ^^ sounds great, I had essentially the same setup on my first truck a 92 2.8/5spd, sounds identical!
	[Reply w/Quote]

03-06-2008, 11:09 PM	#212
llorracs93s10 Registered User Age: 22 Join Date: Jun 2007 Posts: 4,569 Location: Middletown, DE User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by MINTSICK ^^ sounds great, I had essentially the same setup on my first truck a 92 2.8/5spd, sounds identical! i have a video of me off the line and when i hit third gear, that muffler for sum reason made it sound like a v8, or atleast not a v6 . But unfortunatly its on a cam corder camera, so i cant unpload it
	[Reply w/Quote]

03-23-2008, 05:29 PM	#213
rennat_2006 Registered User Age: 21 Join Date: Jan 2008 Posts: 22 Location: Kennewick, Wa User is: OffLine	Re: Post Audio/Video Clips Here Magnaflow high flow cat with 3" pipe between cat and a 3" inlet and outlet Hooker Maxflow muffler with a 3" tailpipe exiting in the stock location with no tip. This was taken like 50 miles after install, It has became a little louder and deeper since this video. I would definetely recomend this setup to someone who wants to hear their exhaust but doesnt want all of the noise of a 40 series flowmaster. 2000 4.3l zr2 Blazer http://s201.photobucket.com/albums/a...haustVideo.flv
	[Reply w/Quote]

03-23-2008, 11:12 PM	#214
02_Black_XBlazer Starting from scratch... Join Date: Nov 2005 Posts: 3,331 Location: Over By There, IL User is: OffLine	Re: Post Audio/Video Clips Here ^^^ Could it be? An actual Maxflow clip, finally? Sweet.
	[Reply w/Quote]

03-23-2008, 11:21 PM	#215
rennat_2006 Registered User Age: 21 Join Date: Jan 2008 Posts: 22 Location: Kennewick, Wa User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 97NAS10SS ^^^ Could it be? An actual Maxflow clip, finally? Sweet. It sure is! Nice to see something besides another Flowmaster huh
	[Reply w/Quote]

03-24-2008, 12:43 AM	#216
tt85_GM I AM CANADIAN Age: 24 Join Date: Feb 2006 Posts: 5,337 Location: Ont. Canada User is: OffLine	Re: Post Audio/Video Clips Here Nice but you need a close up of it idling.
	[Reply w/Quote]

03-24-2008, 01:00 AM	#217
rennat_2006 Registered User Age: 21 Join Date: Jan 2008 Posts: 22 Location: Kennewick, Wa User is: OffLine	Re: Post Audio/Video Clips Here If my little brother wouldnt have dropped my digital camera on the asphalt after the driveby part then i would be happy too. The screen is shattered and the zoom deal is stuck in, When you turn it on it lights up, beeps, then shuts itself off. When i get a new camera(hopefully fairly soon) i will make another set of videos with how it sound now that it is broken in.
	[Reply w/Quote]

03-25-2008, 03:20 PM	#218
DoItBiG JRoc - The People's Champ Age: 28 Join Date: Jan 2008 Posts: 34 Location: Slidell, LA ==> Dirty South, Gulf Coast User is: OffLine	Re: Post Audio/Video Clips Here Here is mine. I did this with my phone.. 40 Series single in/dual out 3"tips. The set up is on my cardomain page. Link is in the signature.
	[Reply w/Quote]

03-25-2008, 07:07 PM	#219
Brutus2TheMax Cleanest truck in school Age: 20 Join Date: Dec 2007 Posts: 220 Location: Plainfield, IL (60544) User is: OffLine	Re: Post Audio/Video Clips Here I have those same tips in 3.5x8. I love em'! Sounds good man.
	[Reply w/Quote]

03-25-2008, 10:58 PM	#220
1fast4by I'll need human lives... Age: 26 Join Date: Mar 2004 Posts: 10,093 Location: Green Hills/Nashville User is: Online	Re: Post Audio/Video Clips Here Crappy cell phone vid Video Clip 1 (0.05 MB) Play
	[Reply w/Quote]

03-26-2008, 02:24 AM	#221
DoItBiG JRoc - The People's Champ Age: 28 Join Date: Jan 2008 Posts: 34 Location: Slidell, LA ==> Dirty South, Gulf Coast User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by Brutus2TheMax I have those same tips in 3.5x8. I love em'! Sounds good man. It definately sounds nice with those tips. Nice, deep sound.
	[Reply w/Quote]

03-28-2008, 11:34 PM	#222
Brutus2TheMax Cleanest truck in school Age: 20 Join Date: Dec 2007 Posts: 220 Location: Plainfield, IL (60544) User is: OffLine	Re: Post Audio/Video Clips Here I was actually very surprised at how much SS exhaust tips change the tone of the exhaust. Makes it deeper and not as raspy. SURPRISE!
	[Reply w/Quote]

03-31-2008, 01:27 PM	#223
llorracs93s10 Registered User Age: 22 Join Date: Jun 2007 Posts: 4,569 Location: Middletown, DE User is: OffLine	Re: Post Audio/Video Clips Here My buddy's 03 s10 -->4.3 eliminated the first cat, replaced other cat with highflow cat, got a single inlet/dual outlet flowmaster 40 series, and 2.25 in piping out infront of the rear tire.
	[Reply w/Quote]

04-04-2008, 11:16 AM	#224
Dr. Steve Need a script? Age: 27 Join Date: May 2006 Posts: 11,278 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: Online	Re: Post Audio/Video Clips Here My old exhaust that is going bye byes... It has this ridiculous tip on it. It is a 50 series delta flow 2.5" piping out the rear.
	[Reply w/Quote]

04-07-2008, 12:52 PM	#225
beandip I'm Back!! Age: 21 Join Date: Sep 2006 Posts: 6,991 Location: Somewhere, OK User is: Online	Re: Post Audio/Video Clips Here well i just got a new high flow cat and it completely changed how my exhaust sounds (i kept the stock cat, its still good) sorry both videos have been done with a digital camera so it cant pick up the deep tones and the microphone isnt the best. stock cat with flowmaster 40 series, 2.2L engine Magnaflow high flow cat with flowmaster 40 series, 2.2L Note: with the new high flow cat it does sound more of a 4 cylinder at 3200+ rpm, but definitely made the muffler sound more "hollow" and of course made it louder, either way its still a 4 cylinder. tell me what you think, im still debating whether or not of getting a magnaflow muffler but im not in any rush yet. Last edited by beandip : 04-07-2008 at 12:53 PM.
	[Reply w/Quote]

04-10-2008, 07:36 PM	#226
badaSS98 Registered User Age: 29 Join Date: Feb 2005 Posts: 627 Location: Detroit User is: OffLine	Re: Post Audio/Video Clips Here Since you have a 4 cylinder, I would buy a resonator to put in before the muffler, that will make it sound a lot smoother.. Sounds more like a flowmaster now with the high flow cat.. Tinny Jay
	[Reply w/Quote]

04-10-2008, 08:22 PM	#227
badaSS98 Registered User Age: 29 Join Date: Feb 2005 Posts: 627 Location: Detroit User is: OffLine	Re: Post Audio/Video Clips Here Damn, it's amazing that the 2.8 sounds just as good and better than some 4.3's.. haha.. Flowmaster stays in business because of this site. I thought the mustang guys were bad.. haha. Jay
	[Reply w/Quote]

04-15-2008, 08:25 AM	#228
2wd99 Registered User Age: 24 Join Date: Jan 2008 Posts: 58 Location: PA User is: OffLine	Re: Post Audio/Video Clips Here 2.2, stock everything, flowmaster 40, dumped before rear right tire for minimal tailpipe http://smg.photobucket.com/albums/v4...t=DSCN4353.flv
	[Reply w/Quote]

04-16-2008, 10:23 PM	#229
s106banger i need a paint job Join Date: May 2006 Posts: 863 Location: Medina/UNOH User is: OffLine	Re: Post Audio/Video Clips Here 2.5" cat-back with Edelbrock SDT muffler straight out the back. http://youtube.com/watch?v=0WwZD1dtYkE
	[Reply w/Quote]

04-17-2008, 09:19 PM	#230
Joey43 Registered User Join Date: Jul 2006 Posts: 509 Location: User is: OffLine	Re: Post Audio/Video Clips Here Here's a new clip I just did today. I made it on my way to work; the camera was in the passenger seat and the drivers window was all the way down. 2.2 with a 40 series.
	[Reply w/Quote]

04-28-2008, 12:06 AM	#231
02_Black_XBlazer Starting from scratch... Join Date: Nov 2005 Posts: 3,331 Location: Over By There, IL User is: OffLine	Re: Post Audio/Video Clips Here Found this guy on Youtube....Not a Dime, but a veritable cornucopia of exhaust options for the 4.3. He's even got one of those goofy Stylin Concepts tips that people ask about sometimes. http://www.youtube.com/watch?v=GL2pzTAjqR4
	[Reply w/Quote]

05-01-2008, 05:47 PM	#232
CalmLikeABomb Registered User Age: 21 Join Date: Sep 2007 Posts: 21 Location: User is: OffLine	Re: Post Audio/Video Clips Here short exhaust clip, Flowtech afterburner 2 1/2 in 2 1/2 out http://videos.streetfire.net/video/S...lip_159583.htm
	[Reply w/Quote]

05-01-2008, 05:51 PM	#233
The Griff Fronkensteen Join Date: May 2006 Posts: 17,162 Location: Minnesota User is: OffLine	Re: Post Audio/Video Clips Here With headers closed - With headers open -
	[Reply w/Quote]

05-15-2008, 05:03 AM	#234
4UH8Rs Blazer User Age: 19 Join Date: Feb 2008 Posts: 330 Location: User is: OffLine	Re: Post Audio/Video Clips Here does anybody know how i can make my exhaust sound deep and low? i watched most of your videos and hard to determine. i got a 4.3L blazer w/ aem intake mod only. i was thinking flowmaster 40 or 44, single or dual out, and/or with or without cat......thanks
	[Reply w/Quote]

05-15-2008, 05:04 AM	#235
4UH8Rs Blazer User Age: 19 Join Date: Feb 2008 Posts: 330 Location: User is: OffLine	Re: Post Audio/Video Clips Here sorry double post
	[Reply w/Quote]