Post Audio/Video Clips Here

02_Black_XBlazer · 01-30-2007, 06:03 PM

Quote: Originally Posted by 98 SS

what size are the pipes? they sound small?

That was gonna be my question, too. I noticed that 350s (or most any make/model of small block v8) tend to have that "BraaaAAAAAaaapppp" sound when run those bullet-style muffs and anything around 2"-2 1/4" pipes.

MikDee · 01-30-2007, 06:55 PM

Don't know, but I would guess it's the stock size piping, maybe 2 1/4",,, but, if the motor has 9.5 or more compression you would get a clear defined rap with this type of muffler. Straight pipes to the rear would sound similar to this, but louder,,, the bullet just muffles it some.

98 SS · 01-30-2007, 07:27 PM

Quote: Originally Posted by 97NAS10SS

That was gonna be my question, too. I noticed that 350s (or most any make/model of small block v8) tend to have that "BraaaAAAAAaaapppp" sound when run those bullet-style muffs and anything around 2"-2 1/4" pipes.

I was gonna guess 2 or 2 1/4 too. I bet on decel it cackles like a bitch. A bigger pipe would mellow it out quite a bit, and add an x-pipe to the mix and i bet itd sound and run pretty nice.

MikDee · 01-31-2007, 12:27 AM

Quote: Originally Posted by 98 SS

I was gonna guess 2 or 2 1/4 too. I bet on decel it cackles like a bitch. A bigger pipe would mellow it out quite a bit, and add an x-pipe to the mix and i bet itd sound and run pretty nice.

Just to finish this all up, and put it to rest, I'd love to hear these on a 4.3 V6 to see if they sound similar? check out the first poster here: Post Your Exhaust Sound Clips, Videos, and Pictures - FULLSIZEforums - Chevy Truck

98 SS · 01-31-2007, 09:52 AM

Quote: Originally Posted by MikDee

Just to finish this all up, and put it to rest, I'd love to hear these on a 4.3 V6 to see if they sound similar? check out the first poster here: Post Your Exhaust Sound Clips, Videos, and Pictures - FULLSIZEforums - Chevy Truck

Looks like glass packs or steel packs. Im getting ready to put my set back on cause I blew up the temporary muffler I swapped on. Its so damn loud right now cause I have a crack in one side of the case and The other side of the case is gone. They used really shitty metal when dynomax made the first round of the x-pipe mufflers......Or maybe its just my truck???? lol

horsepwraddict · 02-04-2007, 06:42 PM

carbed 305, crane compucam 2040, longtube headers, true duals no cats and froce mufflers dumped at the axle.

Putfile - force 93

Joey43 · 02-05-2007, 11:09 PM

2.2 with a Flowmaster 40.

xtremegeek · 02-06-2007, 02:15 AM

Quote: Originally Posted by horsepwraddict

carbed 305, crane compucam 2040, longtube headers, true duals no cats and froce mufflers dumped at the axle.

Putfile - force 93

pretty sik!

lowriderbowtie · 02-07-2007, 06:08 PM

Quote: Originally Posted by Joey43

2.2 with a Flowmaster 40.

i think this just talked me out of a flow 40 on my truck

tippmann243 · 02-17-2007, 04:03 PM

here is my blazer

layinrockers10 · 02-18-2007, 01:45 PM

http://www.youtube.com/watch?v=XJNz0tUY024

magnaflow cat, Borla XR-1 all pipes are 3 inch including the dual outlets... topped off with 3.5 stainless tips

bosco_108 · 02-21-2007, 06:23 PM

Alright I got one for ya. Stock exhaust except for a Trush free flow 2.5 in/out. Whacha think?

Myspace.com

bosco_108 · 02-21-2007, 07:11 PM

Nope its a 4.3l.

bosco_108 · 02-21-2007, 08:09 PM

Does this help? look below

MikDee · 02-21-2007, 11:58 PM

Quote: Originally Posted by bosco_108

Does this help? look below

Wait, I Like it! Which muffler is that, the round red straight thru? or the thrush turbo?

bosco_108 · 02-22-2007, 01:56 AM

None of the above. My old friend had it brand new in box. It looks like the straight red one just not painted. Old school muff for new school chevy power! Just wait till the 3" pipe is on that baby!

MikDee · 02-22-2007, 08:44 AM

Quote: Originally Posted by bosco_108

None of the above. My old friend had it brand new in box. It looks like the straight red one just not painted. Old school muff for new school chevy power! Just wait till the 3" pipe is on that baby!

Ok then, it must be made like a Cherry Bomb, or Dynomax Bullet, a straight thru glasspack with just a perforated core, no louvers inside to change the tone like some straight thru mufflers. By the way do you happen to know the muffler case length?

bosco_108 · 02-22-2007, 06:51 PM

It is 22" from end to end.

frankum · 02-25-2007, 05:05 PM

1994 Sonoma 4.3L CPI
YouTube - 1994 sonoma 4.3L cpi

3.5" wide, 22" long. Catback, no special intake or exahust besides duals.

HighRidinS10 · 02-26-2007, 11:50 PM

anyone got any suggestions for a 95 s-10 with a 4.3 vortec, it's a standard, and on a lift if that would change anyones thoughts

I'm leaning towards a flowmaster 40 series

Final Fantasy · 02-28-2007, 12:18 AM

Quote: Originally Posted by HighRidinS10

anyone got any suggestions for a 95 s-10 with a 4.3 vortec, it's a standard, and on a lift if that would change anyones thoughts

I'm leaning towards a flowmaster 40 series

I just put my 95 S10 W' through the shop to find that the caddy converter was completely stopped up. They somehow put on a higher flowing cat and now (through the 13 - 14 year old muffler) it is loud enough to be heard and turn heads, but not tooooooooo loud. Its got that nice deep rumble as well.

I really wish I knew what they put on (had to take to a Cadillac dealership because there were no chevy's around. If I were you, I'd get a GM performance cat (if such a thing exists) and plop that on THEN go get a Flow 40. I'm waiting 2 weeks till spring break and then ordering up the flowmaster, but I'm not sure if I want too as it is pretty nice sounding by changing out the cat.

98 SS · 02-28-2007, 08:58 AM

bmxbang · 03-15-2007, 06:42 PM

heres mine 01 4.3l Blazer all stock except for intake and force pro series muffler the exhaust stops at the end of the muffler but i still need to get it dumped its not to bad i like it sounds alot louder in person but it was def worth the money.

YouTube - exhaust

sorry couldnt embed it for some reason

bg's · 03-25-2007, 12:51 AM

Here's a clip of a 3" Flowtech Afterburner I put on. The clunkings are
from the loose mounts. Have to have em welded up. The end is me
stumbling around like a moron. I used a tiny Olympus WS-100 dig
recorder. I think in real time it sounds better, but what do I know.
Muff was 40.00 bucks at Summit at the time. Part num is 50330FLT.
Maybe it does sounds like a fart can, oh well. Crank it up. >

Slonoma with Flowtech

MikDee · 03-25-2007, 02:36 AM

That sounds excellent Bob! Real clean, with a sound of power,,, even better then my Speed FX (flowmaster 40 clone)

bg's · 03-25-2007, 04:37 AM

Thanks Mike. That clip you had on yours is what got me to
install one. I still think that clip you made was one of the
cleanest exhaust clips I've heard from a 4.3.

RustyButTrusty · 03-25-2007, 06:32 PM

Heres my 2.2l, with stock piping up to a Dynomax ST, exiting before the rear tire :

Video of 2.2L S-10 w/a Dynomax ST - Photobucket - Video and Image Hosting

Not the best video I know, and its not really that loud inside ( windows were down )...

636andy636 · 04-03-2007, 07:27 PM

S10 2.8 Unknown after market muffler

1998BlueBlaze · 04-22-2007, 01:38 PM

Flowmaster 40
2.25'' in/2.25'' out
2'' Y pipe into 2.25'' duals
3'' Chrome Tips

http://vids.myspace.com/index.cfm?fu...d=20207 14292

security802 · 05-05-2007, 02:25 PM

2.2 Stock piping, to a dynomax super turbo, and out the same a stock.

Bruizer · 05-08-2007, 11:29 PM

Quote: Originally Posted by bmxbang

heres mine 01 4.3l Blazer all stock except for intake and force pro series muffler the exhaust stops at the end of the muffler but i still need to get it dumped its not to bad i like it sounds alot louder in person but it was def worth the money.

YouTube - exhaust

sorry couldnt embed it for some reason

I love the sound of that. Need to get a clip of a drive by. Is that a dual outlet or single outlet?

Chris0nllyn · 05-10-2007, 01:38 AM

heres a vid of my 2.2 (the video is taken during the first start since my wreck in december...it has a kamikaze header and DP bolted to a 2.5" magnaflow 18" muffler...this is with the tailpipe in....i only use it for emission test time

wildman ss · 05-10-2007, 04:04 PM

my 95 blazer

556mm · 05-11-2007, 07:22 AM

sounds good wildman. what exhaust is that?

MikDee · 05-11-2007, 09:07 AM

It's got that deep throaty sound of a Flow orig. 40, sounds like mine.

camaro590 · 05-23-2007, 05:55 PM

87 blazer 2.8 flowmaster 40 1 in 2 out dumped before axle.

MINTSICK · 05-23-2007, 06:44 PM

Here's a kinda weak video I took yesterday real quick, just an small run 1st through 3rd nothing fancy other than showing how loud the exhaust is with the windows down

lycan · 06-03-2007, 03:06 AM

wanted quiet exhaust, but I'm happy with how this I got it to sound

audio/video of interior sound when driving

~~02_Vortech~~ · 06-11-2007, 01:13 PM

MY EXHAUST VID- 60TRIM TURBO w/ DUMPED WASTEGATE + LOTS OF FUN AND OTHER SHIT. EXHAUST VIDS START ABOUT HALF WAY THROUGH-

http://video.google.com/videoplay?do...+rodgers&hl=en

swamp_rat · 06-12-2007, 12:22 AM

my 85 with stock 2.8, no cat, flowmaster 40 im guessing and the tip to the side(this was recorded a few months ago, lol)

swamp_rat · 06-13-2007, 06:58 PM

Quote: Originally Posted by layinrockers10

http://www.youtube.com/watch?v=XJNz0tUY024

magnaflow cat, Borla XR-1 all pipes are 3 inch including the dual outlets... topped off with 3.5 stainless tips

i actualy like the sound of that

swamp_rat · 06-13-2007, 07:05 PM

Quote: Originally Posted by 97NAS10SS

O.K., after this one, I'm done whoring this thread, I promise!!

New Exhaust

Edelbrock T.E.S. headers
Cat deleted/Caspers 02 sim
Flowmaster Super 40 3"in/dual 2 1/2" out

Click here to see Video

wow that sound settled the exhaust system im going with when i build up the 4.3 for my 85, absolutely love it dude

1badzq8 · 06-15-2007, 12:33 AM

ok so i want to see what my truck would sound like with headers i have a magnaflow single in dual out cat back,2 inch y pipe and no cats, anyone else have this setup + headers

mb252 · 06-15-2007, 01:19 AM

Here's a link to a vid of my exhaust. It's a stainless flowmaster 40 series with 2 1/2" pipe, and 2 1/2" tips. I think it would sound a lot better without the convertor.
http://s190.photobucket.com/albums/z...exhaustrev.flv

MINTSICK · 06-15-2007, 12:19 PM

Quote: Originally Posted by 1badzq8

ok so i want to see what my truck would sound like with headers i have a magnaflow single in dual out cat back,2 inch y pipe and no cats, anyone else have this setup + headers

Won't sound really any different compared to stock manifolds.

Jigg · 06-26-2007, 11:55 PM

My new Magnaflow setup

02_Black_XBlazer · 07-10-2007, 06:55 PM

I found this poking around, didn't see it anywhere here before, so I hope it's not a repost. Oh, it's foreign. I believe Brazilian. No idea what the setup is, just sounds good. (i.m.o., of course)

http://video.google.com/videoplay?do...99003710904363

bg's · 07-10-2007, 07:23 PM

^^ Here's a page from him. I don't know wth he's running, but it sounds
pretty good. He's running the sh*t out of that engine. He has a dyno
run as well..

http://video.google.com/videoplay?do...99003710904363

MINTSICK · 07-10-2007, 10:19 PM

Haha I remember finding that a long time ago, always thought it sounded neat even though the truck appears to be slow as hell. The setup is weird to say the least: http://www.*******.com/watch?v=qigOCLX4ttY

02_Black_XBlazer · 07-11-2007, 08:38 PM

Quote: Originally Posted by MikDee

That sounds pretty good, it has a slight raspy motor sound, like a straight thru with no packing, of some type?

Yeah, I'm having trouble with getting to those links myself???

You can see his setup on the one exhaust video in that group, Looks almost likea couple of round Magnaflows or something, but it looks like he's got on one each side straight back from the manifolds...No gas tanks on the driver's side in Brazil? Also, I don't see a balnce pipe between the sides. Could be where the raspiness comes in, like two 3 cylinders running out of sequence...

01-30-2007, 06:03 PM	#101
02_Black_XBlazer Starting from scratch... Join Date: Nov 2005 Posts: 3,331 Location: Over By There, IL User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 98 SS what size are the pipes? they sound small? That was gonna be my question, too. I noticed that 350s (or most any make/model of small block v8) tend to have that "BraaaAAAAAaaapppp" sound when run those bullet-style muffs and anything around 2"-2 1/4" pipes.
	[Reply w/Quote]

01-30-2007, 06:55 PM	#102
MikDee Registered User Join Date: Jan 2007 Posts: 635 Location: Milford, Pa. User is: OffLine	Re: Post Audio/Video Clips Here Don't know, but I would guess it's the stock size piping, maybe 2 1/4",,, but, if the motor has 9.5 or more compression you would get a clear defined rap with this type of muffler. Straight pipes to the rear would sound similar to this, but louder,,, the bullet just muffles it some.
	[Reply w/Quote]

01-30-2007, 07:27 PM	#103
98 SS I call her: NIGHTMARE Join Date: Apr 2004 Posts: 1,943 Location: The TPK User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 97NAS10SS That was gonna be my question, too. I noticed that 350s (or most any make/model of small block v8) tend to have that "BraaaAAAAAaaapppp" sound when run those bullet-style muffs and anything around 2"-2 1/4" pipes. I was gonna guess 2 or 2 1/4 too. I bet on decel it cackles like a bitch. A bigger pipe would mellow it out quite a bit, and add an x-pipe to the mix and i bet itd sound and run pretty nice.
	[Reply w/Quote]

01-31-2007, 12:27 AM	#104
MikDee Registered User Join Date: Jan 2007 Posts: 635 Location: Milford, Pa. User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 98 SS I was gonna guess 2 or 2 1/4 too. I bet on decel it cackles like a bitch. A bigger pipe would mellow it out quite a bit, and add an x-pipe to the mix and i bet itd sound and run pretty nice. Just to finish this all up, and put it to rest, I'd love to hear these on a 4.3 V6 to see if they sound similar? check out the first poster here: Post Your Exhaust Sound Clips, Videos, and Pictures - FULLSIZEforums - Chevy Truck
	[Reply w/Quote]

01-31-2007, 09:52 AM	#105
98 SS I call her: NIGHTMARE Join Date: Apr 2004 Posts: 1,943 Location: The TPK User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by MikDee Just to finish this all up, and put it to rest, I'd love to hear these on a 4.3 V6 to see if they sound similar? check out the first poster here: Post Your Exhaust Sound Clips, Videos, and Pictures - FULLSIZEforums - Chevy Truck Looks like glass packs or steel packs. Im getting ready to put my set back on cause I blew up the temporary muffler I swapped on. Its so damn loud right now cause I have a crack in one side of the case and The other side of the case is gone. They used really shitty metal when dynomax made the first round of the x-pipe mufflers......Or maybe its just my truck???? lol
	[Reply w/Quote]

02-04-2007, 06:42 PM	#106
horsepwraddict s10 newb Join Date: Oct 2005 Posts: 671 Location: Princeton MA User is: OffLine	Re: Post Audio/Video Clips Here carbed 305, crane compucam 2040, longtube headers, true duals no cats and froce mufflers dumped at the axle. Putfile - force 93
	[Reply w/Quote]

02-05-2007, 11:09 PM	#107
Joey43 Registered User Join Date: Jul 2006 Posts: 509 Location: User is: OffLine	Re: Post Audio/Video Clips Here 2.2 with a Flowmaster 40.
	[Reply w/Quote]

02-06-2007, 02:15 AM	#108
xtremegeek gurlz smell Age: 24 Join Date: Jul 2005 Posts: 1,591 Location: Miami User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by horsepwraddict carbed 305, crane compucam 2040, longtube headers, true duals no cats and froce mufflers dumped at the axle. Putfile - force 93 pretty sik!
	[Reply w/Quote]

02-07-2007, 06:08 PM	#109
lowriderbowtie 2LO4BC Age: 23 Join Date: Jan 2004 Posts: 2,856 Location: Kamloops, BC CANADA! User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by Joey43 2.2 with a Flowmaster 40. i think this just talked me out of a flow 40 on my truck
	[Reply w/Quote]

02-17-2007, 04:03 PM	#110
tippmann243 the youngest has been Age: 22 Join Date: Jul 2004 Posts: 3,200 Location: FLORISSANT MO User is: OffLine	Re: Post Audio/Video Clips Here here is my blazer Last edited by tippmann243 : 02-17-2007 at 04:04 PM.
	[Reply w/Quote]

02-18-2007, 01:45 PM	#111
layinrockers10 fomerly 94badazz Age: 24 Join Date: Dec 2005 Posts: 146 Location: buffalo, NY User is: OffLine	Re: Post Audio/Video Clips Here http://www.youtube.com/watch?v=XJNz0tUY024 magnaflow cat, Borla XR-1 all pipes are 3 inch including the dual outlets... topped off with 3.5 stainless tips
	[Reply w/Quote]

02-21-2007, 06:23 PM	#112
bosco_108 Project Double S-10 Age: 26 Join Date: Feb 2007 Posts: 22 Location: Kenowhere User is: OffLine	Re: Post Audio/Video Clips Here Alright I got one for ya. Stock exhaust except for a Trush free flow 2.5 in/out. Whacha think? Myspace.com
	[Reply w/Quote]

02-21-2007, 07:11 PM	#113
bosco_108 Project Double S-10 Age: 26 Join Date: Feb 2007 Posts: 22 Location: Kenowhere User is: OffLine	Re: Post Audio/Video Clips Here Nope its a 4.3l.
	[Reply w/Quote]

02-21-2007, 08:09 PM	#114
bosco_108 Project Double S-10 Age: 26 Join Date: Feb 2007 Posts: 22 Location: Kenowhere User is: OffLine	Re: Post Audio/Video Clips Here Does this help? look below
	[Reply w/Quote]

02-21-2007, 11:58 PM	#115
MikDee Registered User Join Date: Jan 2007 Posts: 635 Location: Milford, Pa. User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by bosco_108 Does this help? look below Wait, I Like it! Which muffler is that, the round red straight thru? or the thrush turbo?
	[Reply w/Quote]

02-22-2007, 01:56 AM	#116
bosco_108 Project Double S-10 Age: 26 Join Date: Feb 2007 Posts: 22 Location: Kenowhere User is: OffLine	Re: Post Audio/Video Clips Here None of the above. My old friend had it brand new in box. It looks like the straight red one just not painted. Old school muff for new school chevy power! Just wait till the 3" pipe is on that baby! Last edited by bosco_108 : 02-22-2007 at 02:00 AM.
	[Reply w/Quote]

02-22-2007, 08:44 AM	#117
MikDee Registered User Join Date: Jan 2007 Posts: 635 Location: Milford, Pa. User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by bosco_108 None of the above. My old friend had it brand new in box. It looks like the straight red one just not painted. Old school muff for new school chevy power! Just wait till the 3" pipe is on that baby! Ok then, it must be made like a Cherry Bomb, or Dynomax Bullet, a straight thru glasspack with just a perforated core, no louvers inside to change the tone like some straight thru mufflers. By the way do you happen to know the muffler case length?
	[Reply w/Quote]

02-22-2007, 06:51 PM	#118
bosco_108 Project Double S-10 Age: 26 Join Date: Feb 2007 Posts: 22 Location: Kenowhere User is: OffLine	Re: Post Audio/Video Clips Here It is 22" from end to end.
	[Reply w/Quote]

02-25-2007, 05:05 PM	#119
frankum Photoshop b1tch. Join Date: Apr 2006 Posts: 617 Location: Northern Indiana User is: OffLine	Re: Post Audio/Video Clips Here 1994 Sonoma 4.3L CPI YouTube - 1994 sonoma 4.3L cpi 3.5" wide, 22" long. Catback, no special intake or exahust besides duals.
	[Reply w/Quote]

02-26-2007, 11:50 PM	#120
HighRidinS10 Registered User Age: 19 Join Date: Feb 2007 Posts: 170 Location: New Hampshire User is: OffLine	Re: Post Audio/Video Clips Here anyone got any suggestions for a 95 s-10 with a 4.3 vortec, it's a standard, and on a lift if that would change anyones thoughts I'm leaning towards a flowmaster 40 series
	[Reply w/Quote]

02-28-2007, 12:18 AM	#121
Final Fantasy Registered User Age: 22 Join Date: Jun 2004 Posts: 18 Location: User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by HighRidinS10 anyone got any suggestions for a 95 s-10 with a 4.3 vortec, it's a standard, and on a lift if that would change anyones thoughts I'm leaning towards a flowmaster 40 series I just put my 95 S10 W' through the shop to find that the caddy converter was completely stopped up. They somehow put on a higher flowing cat and now (through the 13 - 14 year old muffler) it is loud enough to be heard and turn heads, but not tooooooooo loud. Its got that nice deep rumble as well. I really wish I knew what they put on (had to take to a Cadillac dealership because there were no chevy's around. If I were you, I'd get a GM performance cat (if such a thing exists) and plop that on THEN go get a Flow 40. I'm waiting 2 weeks till spring break and then ordering up the flowmaster, but I'm not sure if I want too as it is pretty nice sounding by changing out the cat. Last edited by Final Fantasy : 02-28-2007 at 12:19 AM.
	[Reply w/Quote]

02-28-2007, 08:58 AM	#122
98 SS I call her: NIGHTMARE Join Date: Apr 2004 Posts: 1,943 Location: The TPK User is: OffLine	Re: Post Audio/Video Clips Here
	[Reply w/Quote]

03-15-2007, 06:42 PM	#123
bmxbang Registered User Age: 23 Join Date: Jan 2004 Posts: 8,021 Location: Bluesprings, MO User is: OffLine	Re: Post Audio/Video Clips Here heres mine 01 4.3l Blazer all stock except for intake and force pro series muffler the exhaust stops at the end of the muffler but i still need to get it dumped its not to bad i like it sounds alot louder in person but it was def worth the money. YouTube - exhaust sorry couldnt embed it for some reason Last edited by bmxbang : 03-15-2007 at 06:48 PM.
	[Reply w/Quote]

03-25-2007, 12:51 AM	#124
bg's crap Join Date: Jun 2002 Posts: 8,096 Location: Who cares.. User is: OffLine	Re: Post Audio/Video Clips Here Here's a clip of a 3" Flowtech Afterburner I put on. The clunkings are from the loose mounts. Have to have em welded up. The end is me stumbling around like a moron. I used a tiny Olympus WS-100 dig recorder. I think in real time it sounds better, but what do I know. Muff was 40.00 bucks at Summit at the time. Part num is 50330FLT. Maybe it does sounds like a fart can, oh well. Crank it up. > Slonoma with Flowtech Last edited by bg's : 03-25-2007 at 01:18 AM.
	[Reply w/Quote]

03-25-2007, 02:36 AM	#125
MikDee Registered User Join Date: Jan 2007 Posts: 635 Location: Milford, Pa. User is: OffLine	Re: Post Audio/Video Clips Here That sounds excellent Bob! Real clean, with a sound of power,,, even better then my Speed FX (flowmaster 40 clone)
	[Reply w/Quote]

03-25-2007, 04:37 AM	#126
bg's crap Join Date: Jun 2002 Posts: 8,096 Location: Who cares.. User is: OffLine	Re: Post Audio/Video Clips Here Thanks Mike. That clip you had on yours is what got me to install one. I still think that clip you made was one of the cleanest exhaust clips I've heard from a 4.3. Last edited by bg's : 03-25-2007 at 04:39 AM.
	[Reply w/Quote]

03-25-2007, 06:32 PM	#127
RustyButTrusty The Blue Pwns Joo! Age: 23 Join Date: May 2004 Posts: 1,660 Location: User is: OffLine	Re: Post Audio/Video Clips Here Heres my 2.2l, with stock piping up to a Dynomax ST, exiting before the rear tire : Video of 2.2L S-10 w/a Dynomax ST - Photobucket - Video and Image Hosting Not the best video I know, and its not really that loud inside ( windows were down )...
	[Reply w/Quote]

04-03-2007, 07:27 PM	#128
636andy636 Can-EH-Dian Age: 20 Join Date: Feb 2006 Posts: 460 Location: Canada User is: OffLine	Re: Post Audio/Video Clips Here S10 2.8 Unknown after market muffler
	[Reply w/Quote]

04-22-2007, 01:38 PM	#129
1998BlueBlaze Registered User Join Date: Jan 2007 Posts: 146 Location: User is: OffLine	Re: Post Audio/Video Clips Here Flowmaster 40 2.25'' in/2.25'' out 2'' Y pipe into 2.25'' duals 3'' Chrome Tips http://vids.myspace.com/index.cfm?fu...d=20207 14292
	[Reply w/Quote]

05-05-2007, 02:25 PM	#130
security802 Novice Customizer Age: 34 Join Date: Feb 2007 Posts: 188 Location: User is: OffLine	Re: Post Audio/Video Clips Here 2.2 Stock piping, to a dynomax super turbo, and out the same a stock.
	[Reply w/Quote]

05-08-2007, 11:29 PM	#131
Bruizer The Deuce Join Date: Jan 2007 Posts: 204 Location: South Carolina User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by bmxbang heres mine 01 4.3l Blazer all stock except for intake and force pro series muffler the exhaust stops at the end of the muffler but i still need to get it dumped its not to bad i like it sounds alot louder in person but it was def worth the money. YouTube - exhaust sorry couldnt embed it for some reason I love the sound of that. Need to get a clip of a drive by. Is that a dual outlet or single outlet?
	[Reply w/Quote]

05-10-2007, 01:38 AM	#132
Chris0nllyn tu-tu guru Age: 22 Join Date: Jan 2004 Posts: 8,715 Location: Southern MD User is: OffLine	Re: Post Audio/Video Clips Here heres a vid of my 2.2 (the video is taken during the first start since my wreck in december...it has a kamikaze header and DP bolted to a 2.5" magnaflow 18" muffler...this is with the tailpipe in....i only use it for emission test time
	[Reply w/Quote]

05-10-2007, 04:04 PM	#133
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 5,993 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: Post Audio/Video Clips Here my 95 blazer
	[Reply w/Quote]

05-11-2007, 07:22 AM	#134
556mm &amp;lt;3 redheads Age: 27 Join Date: Oct 2005 Posts: 25,729 Location: User is: OffLine	Re: Post Audio/Video Clips Here sounds good wildman. what exhaust is that?
	[Reply w/Quote]

05-11-2007, 09:07 AM	#135
MikDee Registered User Join Date: Jan 2007 Posts: 635 Location: Milford, Pa. User is: OffLine	Re: Post Audio/Video Clips Here It's got that deep throaty sound of a Flow orig. 40, sounds like mine.
	[Reply w/Quote]