Post Audio/Video Clips Here

450r44 · 07-04-2006, 05:04 PM

Quote: Originally Posted by 97NAS10SS

Edelbrock t.e.s. (obviously), no cat w/ caspers 02 sim, and a Flow Super 40 single in/dual out. Had it installed yesterday morning, sounds really good. (I.m.o., of course )

One more open header clip..A quick jaunt around the block to make sure that all my 02's were reading, and that none of my plugs were improperly installed. Again, very, disappointingly short.

Click here to see Video

dude that shit sounds sick im doin that same shit on my 92, thanks man

DaleMcD · 07-05-2006, 12:04 AM

Here is a Video of me doing a phonebook burnout in My 89 S10 at the bottom of video select original quality for best viewing

02_Black_XBlazer · 07-06-2006, 06:25 PM

O.K., after this one, I'm done whoring this thread, I promise!!

New Exhaust

Edelbrock T.E.S. headers
Cat deleted/Caspers 02 sim
Flowmaster Super 40 3"in/dual 2 1/2" out

Click here to see Video

01black4.3 · 07-06-2006, 07:34 PM

Quote: Originally Posted by 97NAS10SS

O.K., after this one, I'm done whoring this thread, I promise!!

New Exhaust

Edelbrock T.E.S. headers
Cat deleted/Caspers 02 sim
Flowmaster Super 40 3"in/dual 2 1/2" out

Click here to see Video

Give me!!

zeldalord · 07-06-2006, 11:51 PM

me doing a burnout... had to let off gas to keep from going into the ditch... =(

Click here to see Video

me doing a rev... couldn't run it all the way up cuz of neighbours liven next to me.

Click here to see Video

these are with the old setup of muffler with a duel catback with 5 feet of pipe from muffler. temp setup now is 1.3 feet of 3" dumped just behind axle... no vids yet still waiting on the C5 rollpan so i can run true duels and the exhaust will look just like a C5 vette.

MINTSICK · 07-10-2006, 06:11 PM

Quote: Originally Posted by 97NAS10SS

O.K., after this one, I'm done whoring this thread, I promise!!

New Exhaust

Edelbrock T.E.S. headers
Cat deleted/Caspers 02 sim
Flowmaster Super 40 3"in/dual 2 1/2" out

Click here to see Video

I love it, you revved it so hard that it starts puffing smoke! Sounds nice though.

MINTSICK · 07-10-2006, 06:12 PM

Quote: Originally Posted by zeldalord

me doing a burnout... had to let off gas to keep from going into the ditch... =(
Click here to see Video

me doing a rev... couldn't run it all the way up cuz of neighbours liven next to me.
Click here to see Video

these are with the old setup of muffler with a duel catback with 5 feet of pipe from muffler. temp setup now is 1.3 feet of 3" dumped just behind axle... no vids yet still waiting on the C5 rollpan so i can run true duels and the exhaust will look just like a C5 vette.

I like how this sounds a lot, what muffler was that?

556mm · 07-10-2006, 06:54 PM

Quote: Originally Posted by 97NAS10SS

O.K., after this one, I'm done whoring this thread, I promise!!

New Exhaust

Edelbrock T.E.S. headers
Cat deleted/Caspers 02 sim
Flowmaster Super 40 3"in/dual 2 1/2" out

Click here to see Video

uh oh i need some new underwear. i fi drive to chicago can you do that same setup on my truck? im a clean person and i wont mess your house up too much

hell ill bring some beer too.

02_Black_XBlazer · 07-10-2006, 10:02 PM

Quote: Originally Posted by zeldalord

flowmaster 40 Delta Flow... want to try a Super 40 sometime

I like the Super 40 a lot. I've only had it for about a week, but i'm really digging the tone. I used to run just a straight 40 series, and the Super 40 is deeper outside the cab, and a lot less resonance inside the cab.

White&Crazy · 07-11-2006, 11:03 AM

http://videos.streetfire.net/video/d...1de8551134.htm
2.2 he he

zeldalord · 07-11-2006, 11:24 AM

Quote: Originally Posted by 01black4.3

You have headers? A new Y? A cat?

Edelbrock shorties, premade generic Y and no cat... flowmaster is right behind cab and with 18 inches of 3inch pipe dumping off the muffler right behind the axle... i'll get another vid made tonight.

Quote: Originally Posted by 97NAS10SS

I like the Super 40 a lot. I've only had it for about a week, but i'm really digging the tone. I used to run just a straight 40 series, and the Super 40 is deeper outside the cab, and a lot less resonance inside the cab.

mmmm deeper...

i need it then...
Resonace isn't going to bother me... i can't hear it over my stereo.

carpassion23 · 07-11-2006, 03:10 PM

here is my 96 sonoma 2.2 with the ebay intake and a dynomax turbo muffler

http://videos.streetfire.net/video/7...4b1a3a04e8.htm

zaathur151 · 07-11-2006, 04:56 PM

here is my 94 s-10 2.2L with cold air intake magnaflow dual exhaust

video 1
http://media.putfile.com/22L-magnaflow-system-

video 2
http://smg.photobucket.com/albums/v2...tvideoval2.flv

93Vortecon30s · 07-13-2006, 05:08 AM

Ok heres my clip, 93 jimmy, 4.3 vortec, pacesetter cat back, cat removed. Let me know what you think...

fawien · 07-18-2006, 10:05 AM

Heres my 96 2.2 with the dynomax super turbo 20 incher on all stock pipes and cat.
Sorry for the length and not really getting on it was early morning and i live right next door to the apartment rental office lol.

http://www.supload.com/sound_confirm...=758098171.wav

And putfile wasnt wanting to let me join today

636andy636 · 07-23-2006, 08:11 PM

http://media.putfile.com/S10Exhaust
2.8L unknown aftermarket muffler, 2.5 piping to the muffler and 2 inch tailpipe

toddy · 07-25-2006, 07:26 PM

Quote: Originally Posted by 97NAS10SS

O.K., after this one, I'm done whoring this thread, I promise!!

New Exhaust

Edelbrock T.E.S. headers
Cat deleted/Caspers 02 sim
Flowmaster Super 40 3"in/dual 2 1/2" out

Click here to see Video

damn i love the way that sounds. i wish i could delete the cat on my new blazer tomorrow but damn inspection is gettin me. I might go with either gutted cats or a hi flow cats instead

muslhed · 08-07-2006, 11:01 PM

Here's my junk. I'm currently running the stock exhaust up to the stock cat, 2.5" single in & out 14" long Magnaflow, with a 2.5" tailpipe. The motor is stock. IMO, the Magnaflow sounds like trash behind the 4.3 V6. Here's my lil tractors fart tube:

CLICK

bg's · 08-16-2006, 11:08 PM

A few people have asked me for a sound clip of the Hooker Maxflow
I run on my ride. It's 3" single in & out with 3" pipe from the cat
to the right under the bumper. I still don't have one, but the
closest I can get is from Hooker's site. These two clips are
close to what mine sounds like. They would be VERY close
if I had two more cylinders and duals. Of course the Ford
sounds somewhat different than a GM but if you'll just get
past that and imagine the Hooker with v-6 and one Maxflow
in 3", you'll get a really good idea of what a Maxflow sounds
like inside the car or truck and outside. HTH's.

http://www.holley.com/data/products/...nsidedrive.MPG
http://www.holley.com/data/products/...dletakeoff.MPG

Now I'm not going to try and BS anyone into thinking my tiny
v-6 sounds as good as this Mustang, but that's not the point.
I'm just trying to give others here an idea of the Maxflow's tone.
Any other member who runs one I think might agree.

over123456e · 08-20-2006, 01:03 AM

on a 2003 s-10 4.3 with the zq8 what is the size of the cat....what size should i get from magnaflow....2 1/2 or 2 1/4 or 3". i want a high flow....i am not sure what the size is..please let me know thanks eric... check out truck at http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=49428305&i mageID=968790870&MyToken=669ba324-5803-460b-8c25-9477954c022e

02_Black_XBlazer · 08-21-2006, 05:42 PM

Quote: Originally Posted by over123456e

on a 2003 s-10 4.3 with the zq8 what is the size of the cat....what size should i get from magnaflow....2 1/2 or 2 1/4 or 3". i want a high flow....i am not sure what the size is..please let me know thanks eric... check out truck at http://viewmorepics.myspace.com/inde...5-9477954c022e

The factory piping size is 2 1/4". As long as you're gonna get one, though, you might as well go 2 1/2". a little extra flow never hurt anyone.

MINTSICK · 08-21-2006, 05:55 PM

Quote: Originally Posted by muslhed

Here's my junk. I'm currently running the stock exhaust up to the stock cat, 2.5" single in & out 14" long Magnaflow, with a 2.5" tailpipe. The motor is stock. IMO, the Magnaflow sounds like trash behind the 4.3 V6. Here's my lil tractors fart tube:

CLICK

I think it sounds pretty tough, my brother had a 14" with single 2.5" pipe on his 98 bravada and it also sounded real mean to me.

99S10LS · 08-22-2006, 05:36 PM

Here is a sound clip (video.. but i didnt take the lesne cap off) of my 2.2 S10 with a dynomax super turbo muffler.

http://s20.photobucket.com/albums/b2...xhaustclip.flv

*Sounds a little different than it does in the video. But its close. I can try to get a little better one if anyone wants me too*

My95BOWTIE · 08-26-2006, 04:13 AM

my 4.3 str8's right before i welded the pipe in place of the cat

http://www.youtube.com/watch?v=dmDpp6XORV8

Warren01s10 · 09-01-2006, 05:07 AM

Heres my 01 s-10 4cyl 5spd with a Flowmaster delta flow 50 series muffler i like the sound of it, not to loud but a nice mellow tone and that pop-pop sound on deceleration, what do you guys think? http://www.youtube.com/watch?v=Zlg3POsW7zw

SilverWings · 09-05-2006, 05:16 PM

Quote: Originally Posted by 97NAS10SS

O.K., after this one, I'm done whoring this thread, I promise!!

New Exhaust

Edelbrock T.E.S. headers
Cat deleted/Caspers 02 sim
Flowmaster Super 40 3"in/dual 2 1/2" out

Click here to see Video

Simular to sound of my exhaust. Maybe it's just the audio quality but mine sounds deaper. I like it. Sounds good at idle and WOT!

scooter9715 · 09-21-2006, 10:13 PM

Quote: Originally Posted by 97NAS10SS

O.K., after this one, I'm done whoring this thread, I promise!!

New Exhaust

Edelbrock T.E.S. headers
Cat deleted/Caspers 02 sim
Flowmaster Super 40 3"in/dual 2 1/2" out

Click here to see Video

I have a ss too and I want to do that. That is what I want my truck to sound like. I had experience with the clips you had earlier with just headers. I had to put something on around here or I would have been pulled over fast because of the jerks they have around my job. I'm a woman that wants to have her dime sounding mean and not like a rice burner. I hate that sound.

down2earths10 · 09-23-2006, 12:54 AM

5.3 .060 over. vortec heads. iskey cam, edelbroch performer air gap, 700 holler dp carb. headman headers, with 18" of flex pipe

ive got flowmaster delta flow 40 series race version mufflers, just gotta get them put on sometime.

98 SS · 01-18-2007, 12:21 AM

Project: NIGHTMARE

No muffler

Slightly rattling muffler

MINTSICK · 01-18-2007, 10:47 AM

MikDee · 01-18-2007, 02:22 PM

Quote: Originally Posted by 98 SS

Project: NIGHTMARE

No muffler

Slightly rattling muffler

Wow! That motor sounds Radical! but, not that loud considering the work done to it?

jhankinson · 01-18-2007, 09:07 PM

LS1 with true dual 2.25"...no cats...dual magnaflow mufflers...swept side hidden up tight

MikDee · 01-19-2007, 12:40 PM

Want more, & better noise then a Flow 40, or Magnaflow, An IMCO SI/SO straight thru to a Y-pipe, & tips on a 2002 GMC Sierra 5.3L V8: http://www.youtube.com/watch?v=zLP3wXr5wj0
Still trying to find an IMCO on a 4.3 V6

Ralphie · 01-19-2007, 03:39 PM

http://www.AlwaysJohn.com/hiddenvide...inggoodnow.AVI

Mystery Flowmaster, 2.5" pipe, no cat. Stock Y-pipe.

I'm thinking about a Dynomax later down the road. Not sure what I want to do yet.

636andy636 · 01-20-2007, 05:30 PM

2.8L S10. 0-70mph

My S10. 2.8L, unknown after market muffler, flipped air lid, K&N air cleaner.

anthony9789 · 01-20-2007, 10:33 PM

Quote: Originally Posted by MINTSICK

http://www.zippyvideos.com/627652576...6/mintsickcam/

My truck before cam swap and my brothers xtreme jba headers, no cat, 2.5" flowmaster over the axle.

http://www.zippyvideos.com/227493807...hflowmaster43/

NICE thats how i want my exhaust to sound which flowmaster is that ??

shift220 · 01-21-2007, 05:04 AM

2001 Turbocharged 4.3L V6. Custom tubular turbo headers, 2.5" downpipe, 3" exhaust, 3" Hooker Maxflow muffler.

VIDEO

MINTSICK · 01-21-2007, 11:31 AM

Quote: Originally Posted by anthony9789

NICE thats how i want my exhaust to sound which flowmaster is that ??

On the xtreme is a 40 series original.

Tat2Dragons · 01-21-2007, 07:41 PM

Damn theres some great sounding trucks on here.

Heres a small video clip of mine,it's just a single in/out original 40 series Flowmaster,Catco Hi-flow cat,custom single 2 1/2" tailpipe and a 4 3/4" oval Ractive stainless/rolled edge tip.

http://www.youtube.com/watch?v=9d6U7hcKOY8

MINTSICK · 01-22-2007, 10:15 AM

Quote: Originally Posted by xxosiris9xx

so the older video was your engine stock cam, spintech sportsman pro street, no cat? bc thats definately close to the sound i wouldnt mind having

The video with my x cab truck and my brothers reg cab xtreme, my truck had no cat into a 2.5" spintech pro street and a single tailpipe over the axle out the back.

xxosiris9xx · 01-22-2007, 01:20 PM

i like the spintech i think...how much tone change would running a cat have on it?

pollard · 01-22-2007, 01:35 PM

my s10 http://www.youtube.com/watch?v=p_cnz3lL6XE
http://www.youtube.com/watch?v=RaCssYIBEyA

brothers dodge
http://www.youtube.com/watch?v=B8ujdIKEcM8

not the best videos

xxosiris9xx · 01-22-2007, 02:50 PM

nice...id be more tempted to leave the cat on as im not as big into crazy performance as i once was..but i still debate between 2.5" or 3"

MINTSICK · 01-22-2007, 04:25 PM

Quote: Originally Posted by xxosiris9xx

nice...id be more tempted to leave the cat on as im not as big into crazy performance as i once was..but i still debate between 2.5" or 3"

There is basically zero difference between no cat and having one, I saw a recent magazine test in a tuner magazine comparing stock cat vs. aftermarket high flow vs. no cat and the difference between high flow and no cat was 1hp on the dyno. I'd go with 3" from the y pipe regardless of the tailpipe setup personally.

xxosiris9xx · 01-22-2007, 06:58 PM

so 3" from the Y to the cat and 3" in/out the spintech...hmmm...now all id need is a job

MikDee · 01-28-2007, 09:48 PM

Dynomax bullets! Here's the Chevrolet pure "Heartbeat of America!"
http://s42.photobucket.com/albums/e340/phatchevy06/Vehicle%20Videos/?action=view&current=12307GNM.flv

jarrodh · 01-30-2007, 03:38 AM

heres mine 350, 30 over, perf intake, 4bbl, with open headmans..

what do ya think

98 SS · 01-30-2007, 10:10 AM

Quote: Originally Posted by MikDee

Dynomax bullets! Here's the Chevrolet pure "Heartbeat of America!"
12307GNM.flv - Video - Photobucket - Video and Image Hosting

sounds kinda like a moped or a mini bike.....like my old JC penny mini bike with the 2.5 briggs and stratton

MikDee · 01-30-2007, 11:23 AM

Then you guys must like a pure loud Roaring noise! just run open pipes, or turn downs, I Don't!
I like it tuned sounding!

98 SS · 01-30-2007, 02:15 PM

Quote: Originally Posted by MikDee

Then you guys must like a pure loud Roaring noise! just run open pipes, or turn downs, I Don't!
I like it tuned sounding!

what size are the pipes? they sound small?

07-04-2006, 05:04 PM	#51
450r44 Registered User Join Date: Apr 2006 Posts: 85 Location: User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 97NAS10SS Edelbrock t.e.s. (obviously), no cat w/ caspers 02 sim, and a Flow Super 40 single in/dual out. Had it installed yesterday morning, sounds really good. (I.m.o., of course ) One more open header clip..A quick jaunt around the block to make sure that all my 02's were reading, and that none of my plugs were improperly installed. Again, very, disappointingly short. Click here to see Video dude that shit sounds sick im doin that same shit on my 92, thanks man
	[Reply w/Quote]

07-05-2006, 12:04 AM	#52
DaleMcD Registered User Age: 21 Join Date: Jun 2006 Posts: 190 Location: Middlesex County Ontario User is: OffLine	Re: Post Audio/Video Clips Here Here is a Video of me doing a phonebook burnout in My 89 S10 at the bottom of video select original quality for best viewing
	[Reply w/Quote]

07-06-2006, 06:25 PM	#53
02_Black_XBlazer Starting from scratch... Join Date: Nov 2005 Posts: 3,331 Location: Over By There, IL User is: OffLine	Re: Post Audio/Video Clips Here O.K., after this one, I'm done whoring this thread, I promise!! New Exhaust Edelbrock T.E.S. headers Cat deleted/Caspers 02 sim Flowmaster Super 40 3"in/dual 2 1/2" out Click here to see Video
	[Reply w/Quote]

07-06-2006, 07:34 PM	#54
01black4.3 limeade Age: 21 Join Date: Apr 2005 Posts: 3,072 Location: Texas User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 97NAS10SS O.K., after this one, I'm done whoring this thread, I promise!! New Exhaust Edelbrock T.E.S. headers Cat deleted/Caspers 02 sim Flowmaster Super 40 3"in/dual 2 1/2" out Click here to see Video Give me!!
	[Reply w/Quote]

07-06-2006, 11:51 PM	#55
zeldalord Cornerin Demon Age: 25 Join Date: Dec 2005 Posts: 2,158 Location: Little Rock User is: OffLine	Re: Post Audio/Video Clips Here me doing a burnout... had to let off gas to keep from going into the ditch... =( Click here to see Video me doing a rev... couldn't run it all the way up cuz of neighbours liven next to me. Click here to see Video these are with the old setup of muffler with a duel catback with 5 feet of pipe from muffler. temp setup now is 1.3 feet of 3" dumped just behind axle... no vids yet still waiting on the C5 rollpan so i can run true duels and the exhaust will look just like a C5 vette. Last edited by zeldalord : 07-06-2006 at 11:59 PM.
	[Reply w/Quote]

07-10-2006, 06:11 PM	#56
MINTSICK Akerfeldt Age: 27 Join Date: Oct 2003 Posts: 11,472 Location: Danvers, Ma User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 97NAS10SS O.K., after this one, I'm done whoring this thread, I promise!! New Exhaust Edelbrock T.E.S. headers Cat deleted/Caspers 02 sim Flowmaster Super 40 3"in/dual 2 1/2" out Click here to see Video I love it, you revved it so hard that it starts puffing smoke! Sounds nice though.
	[Reply w/Quote]

07-10-2006, 06:12 PM	#57
MINTSICK Akerfeldt Age: 27 Join Date: Oct 2003 Posts: 11,472 Location: Danvers, Ma User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by zeldalord me doing a burnout... had to let off gas to keep from going into the ditch... =( Click here to see Video me doing a rev... couldn't run it all the way up cuz of neighbours liven next to me. Click here to see Video these are with the old setup of muffler with a duel catback with 5 feet of pipe from muffler. temp setup now is 1.3 feet of 3" dumped just behind axle... no vids yet still waiting on the C5 rollpan so i can run true duels and the exhaust will look just like a C5 vette. I like how this sounds a lot, what muffler was that?
	[Reply w/Quote]

07-10-2006, 06:54 PM	#58
556mm &amp;lt;3 redheads Age: 27 Join Date: Oct 2005 Posts: 25,729 Location: User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 97NAS10SS O.K., after this one, I'm done whoring this thread, I promise!! New Exhaust Edelbrock T.E.S. headers Cat deleted/Caspers 02 sim Flowmaster Super 40 3"in/dual 2 1/2" out Click here to see Video uh oh i need some new underwear. i fi drive to chicago can you do that same setup on my truck? im a clean person and i wont mess your house up too much hell ill bring some beer too.
	[Reply w/Quote]

07-10-2006, 10:02 PM	#59
02_Black_XBlazer Starting from scratch... Join Date: Nov 2005 Posts: 3,331 Location: Over By There, IL User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by zeldalord flowmaster 40 Delta Flow... want to try a Super 40 sometime I like the Super 40 a lot. I've only had it for about a week, but i'm really digging the tone. I used to run just a straight 40 series, and the Super 40 is deeper outside the cab, and a lot less resonance inside the cab.
	[Reply w/Quote]

07-11-2006, 11:03 AM	#60
White&Crazy Ranger Driver Age: 20 Join Date: Feb 2006 Posts: 1,609 Location: Durham,NC User is: OffLine	Re: Post Audio/Video Clips Here http://videos.streetfire.net/video/d...1de8551134.htm 2.2 he he
	[Reply w/Quote]

07-11-2006, 11:24 AM	#61
zeldalord Cornerin Demon Age: 25 Join Date: Dec 2005 Posts: 2,158 Location: Little Rock User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 01black4.3 You have headers? A new Y? A cat? Edelbrock shorties, premade generic Y and no cat... flowmaster is right behind cab and with 18 inches of 3inch pipe dumping off the muffler right behind the axle... i'll get another vid made tonight. Quote: Originally Posted by 97NAS10SS I like the Super 40 a lot. I've only had it for about a week, but i'm really digging the tone. I used to run just a straight 40 series, and the Super 40 is deeper outside the cab, and a lot less resonance inside the cab. mmmm deeper... i need it then... Resonace isn't going to bother me... i can't hear it over my stereo. Last edited by zeldalord : 07-11-2006 at 11:25 AM.
	[Reply w/Quote]

07-11-2006, 03:10 PM	#62
carpassion23 too slow to be a sleeper Age: 21 Join Date: Feb 2006 Posts: 45 Location: Jacksonville, NC User is: OffLine	Re: Post Audio/Video Clips Here here is my 96 sonoma 2.2 with the ebay intake and a dynomax turbo muffler http://videos.streetfire.net/video/7...4b1a3a04e8.htm
	[Reply w/Quote]

07-11-2006, 04:56 PM	#63
zaathur151 KCSSERIES Age: 21 Join Date: Jan 2005 Posts: 1,563 Location: Odessa Mo. User is: OffLine	Re: Post Audio/Video Clips Here here is my 94 s-10 2.2L with cold air intake magnaflow dual exhaust video 1 http://media.putfile.com/22L-magnaflow-system- video 2 http://smg.photobucket.com/albums/v2...tvideoval2.flv
	[Reply w/Quote]

07-13-2006, 05:08 AM	#64
93Vortecon30s Registered User Join Date: Jul 2006 Posts: 364 Location: User is: OffLine	Re: Post Audio/Video Clips Here Ok heres my clip, 93 jimmy, 4.3 vortec, pacesetter cat back, cat removed. Let me know what you think...
	[Reply w/Quote]

07-18-2006, 10:05 AM	#65
fawien Holy hangover Batman!!! Join Date: Jul 2006 Posts: 296 Location: Lexington KY User is: OffLine	Re: Post Audio/Video Clips Here Heres my 96 2.2 with the dynomax super turbo 20 incher on all stock pipes and cat. Sorry for the length and not really getting on it was early morning and i live right next door to the apartment rental office lol. http://www.supload.com/sound_confirm...=758098171.wav And putfile wasnt wanting to let me join today
	[Reply w/Quote]

07-23-2006, 08:11 PM	#66
636andy636 Can-EH-Dian Age: 20 Join Date: Feb 2006 Posts: 460 Location: Canada User is: OffLine	Re: Post Audio/Video Clips Here http://media.putfile.com/S10Exhaust 2.8L unknown aftermarket muffler, 2.5 piping to the muffler and 2 inch tailpipe
	[Reply w/Quote]

07-25-2006, 07:26 PM	#67
toddy I have No F'ing Title Age: 23 Join Date: Apr 2004 Posts: 2,462 Location: Franklin TN User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 97NAS10SS O.K., after this one, I'm done whoring this thread, I promise!! New Exhaust Edelbrock T.E.S. headers Cat deleted/Caspers 02 sim Flowmaster Super 40 3"in/dual 2 1/2" out Click here to see Video damn i love the way that sounds. i wish i could delete the cat on my new blazer tomorrow but damn inspection is gettin me. I might go with either gutted cats or a hi flow cats instead
	[Reply w/Quote]

08-07-2006, 11:01 PM	#68
muslhed Registered User Age: 34 Join Date: Jan 2004 Posts: 33 Location: Ft. Worth, TX User is: OffLine	Re: Post Audio/Video Clips Here Here's my junk. I'm currently running the stock exhaust up to the stock cat, 2.5" single in & out 14" long Magnaflow, with a 2.5" tailpipe. The motor is stock. IMO, the Magnaflow sounds like trash behind the 4.3 V6. Here's my lil tractors fart tube: *CLICK*
	[Reply w/Quote]

08-16-2006, 11:08 PM	#69
bg's crap Join Date: Jun 2002 Posts: 8,096 Location: Who cares.. User is: OffLine	Re: Post Audio/Video Clips Here A few people have asked me for a sound clip of the Hooker Maxflow I run on my ride. It's 3" single in & out with 3" pipe from the cat to the right under the bumper. I still don't have one, but the closest I can get is from Hooker's site. These two clips are close to what mine sounds like. They would be VERY close if I had two more cylinders and duals. Of course the Ford sounds somewhat different than a GM but if you'll just get past that and imagine the Hooker with v-6 and one Maxflow in 3", you'll get a really good idea of what a Maxflow sounds like inside the car or truck and outside. HTH's. http://www.holley.com/data/products/...nsidedrive.MPG http://www.holley.com/data/products/...dletakeoff.MPG Now I'm not going to try and BS anyone into thinking my tiny v-6 sounds as good as this Mustang, but that's not the point. I'm just trying to give others here an idea of the Maxflow's tone. Any other member who runs one I think might agree.
	[Reply w/Quote]

08-20-2006, 01:03 AM	#70
over123456e Registered User Age: 28 Join Date: Jan 2005 Posts: 11 Location: User is: OffLine	Re: Post Audio/Video Clips Here on a 2003 s-10 4.3 with the zq8 what is the size of the cat....what size should i get from magnaflow....2 1/2 or 2 1/4 or 3". i want a high flow....i am not sure what the size is..please let me know thanks eric... check out truck at http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=49428305&i mageID=968790870&MyToken=669ba324-5803-460b-8c25-9477954c022e
	[Reply w/Quote]

08-21-2006, 05:42 PM	#71
02_Black_XBlazer Starting from scratch... Join Date: Nov 2005 Posts: 3,331 Location: Over By There, IL User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by over123456e on a 2003 s-10 4.3 with the zq8 what is the size of the cat....what size should i get from magnaflow....2 1/2 or 2 1/4 or 3". i want a high flow....i am not sure what the size is..please let me know thanks eric... check out truck at http://viewmorepics.myspace.com/inde...5-9477954c022e The factory piping size is 2 1/4". As long as you're gonna get one, though, you might as well go 2 1/2". a little extra flow never hurt anyone.
	[Reply w/Quote]

08-21-2006, 05:55 PM	#72
MINTSICK Akerfeldt Age: 27 Join Date: Oct 2003 Posts: 11,472 Location: Danvers, Ma User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by muslhed Here's my junk. I'm currently running the stock exhaust up to the stock cat, 2.5" single in & out 14" long Magnaflow, with a 2.5" tailpipe. The motor is stock. IMO, the Magnaflow sounds like trash behind the 4.3 V6. Here's my lil tractors fart tube: *CLICK* I think it sounds pretty tough, my brother had a 14" with single 2.5" pipe on his 98 bravada and it also sounded real mean to me.
	[Reply w/Quote]

08-22-2006, 05:36 PM	#73
99S10LS Registered User Age: 20 Join Date: Dec 2005 Posts: 438 Location: Frederick, MD User is: OffLine	Re: Post Audio/Video Clips Here Here is a sound clip (video.. but i didnt take the lesne cap off) of my 2.2 S10 with a dynomax super turbo muffler. http://s20.photobucket.com/albums/b2...xhaustclip.flv Sounds a little different than it does in the video. But its close. I can try to get a little better one if anyone wants me too
	[Reply w/Quote]

08-26-2006, 04:13 AM	#74
My95BOWTIE M.F.K.-No 1 rides 4 free Age: 20 Join Date: Jun 2006 Posts: 334 Location: memphis,tn User is: OffLine	Re: Post Audio/Video Clips Here my 4.3 str8's right before i welded the pipe in place of the cat http://www.youtube.com/watch?v=dmDpp6XORV8
	[Reply w/Quote]

09-01-2006, 05:07 AM	#75
Warren01s10 Registered User Join Date: Jul 2006 Posts: 55 Location: User is: OffLine	Re: Post Audio/Video Clips Here Heres my 01 s-10 4cyl 5spd with a Flowmaster delta flow 50 series muffler i like the sound of it, not to loud but a nice mellow tone and that pop-pop sound on deceleration, what do you guys think? http://www.youtube.com/watch?v=Zlg3POsW7zw
	[Reply w/Quote]

09-05-2006, 05:16 PM	#76
SilverWings An ol Scott Age: 65 Join Date: Jun 2004 Posts: 496 Location: Greenville/Simpsonville SC User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 97NAS10SS O.K., after this one, I'm done whoring this thread, I promise!! New Exhaust Edelbrock T.E.S. headers Cat deleted/Caspers 02 sim Flowmaster Super 40 3"in/dual 2 1/2" out Click here to see Video Simular to sound of my exhaust. Maybe it's just the audio quality but mine sounds deaper. I like it. Sounds good at idle and WOT!
	[Reply w/Quote]

09-21-2006, 10:13 PM	#77
scooter9715 DimesRLikeDiamonds2Me Age: 27 Join Date: Jan 2006 Posts: 50 Location: Zanesville, Ohio User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 97NAS10SS O.K., after this one, I'm done whoring this thread, I promise!! New Exhaust Edelbrock T.E.S. headers Cat deleted/Caspers 02 sim Flowmaster Super 40 3"in/dual 2 1/2" out Click here to see Video I have a ss too and I want to do that. That is what I want my truck to sound like. I had experience with the clips you had earlier with just headers. I had to put something on around here or I would have been pulled over fast because of the jerks they have around my job. I'm a woman that wants to have her dime sounding mean and not like a rice burner. I hate that sound.
	[Reply w/Quote]

09-23-2006, 12:54 AM	#78
down2earths10 Registered User Age: 21 Join Date: Apr 2005 Posts: 1,228 Location: utah User is: OffLine	Re: Post Audio/Video Clips Here 5.3 .060 over. vortec heads. iskey cam, edelbroch performer air gap, 700 holler dp carb. headman headers, with 18" of flex pipe ive got flowmaster delta flow 40 series race version mufflers, just gotta get them put on sometime.
	[Reply w/Quote]

01-18-2007, 12:21 AM	#79
98 SS I call her: NIGHTMARE Join Date: Apr 2004 Posts: 1,943 Location: The TPK User is: OffLine	Re: Post Audio/Video Clips Here Project: NIGHTMARE No muffler Slightly rattling muffler Last edited by 98 SS : 01-18-2007 at 12:22 AM.
	[Reply w/Quote]

01-18-2007, 10:47 AM	#80
MINTSICK Akerfeldt Age: 27 Join Date: Oct 2003 Posts: 11,472 Location: Danvers, Ma User is: OffLine	Re: Post Audio/Video Clips Here Last edited by MINTSICK : 01-18-2007 at 10:48 AM.
	[Reply w/Quote]

01-18-2007, 02:22 PM	#81
MikDee Registered User Join Date: Jan 2007 Posts: 635 Location: Milford, Pa. User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 98 SS Project: NIGHTMARE No muffler Slightly rattling muffler Wow! That motor sounds Radical! but, not that loud considering the work done to it?
	[Reply w/Quote]

01-18-2007, 09:07 PM	#82
jhankinson Registered User Age: 29 Join Date: Feb 2006 Posts: 358 Location: User is: OffLine	Re: Post Audio/Video Clips Here LS1 with true dual 2.25"...no cats...dual magnaflow mufflers...swept side hidden up tight
	[Reply w/Quote]

01-19-2007, 12:40 PM	#83
MikDee Registered User Join Date: Jan 2007 Posts: 635 Location: Milford, Pa. User is: OffLine	Re: Post Audio/Video Clips Here Want more, & better noise then a Flow 40, or Magnaflow, An IMCO SI/SO straight thru to a Y-pipe, & tips on a 2002 GMC Sierra 5.3L V8: http://www.youtube.com/watch?v=zLP3wXr5wj0 Still trying to find an IMCO on a 4.3 V6 Last edited by MikDee : 01-19-2007 at 12:41 PM.
	[Reply w/Quote]

01-19-2007, 03:39 PM	#84
Ralphie LS2OMFG Age: 25 Join Date: May 2003 Posts: 11,488 Location: Pittsburg KS User is: OffLine	Re: Post Audio/Video Clips Here http://www.AlwaysJohn.com/hiddenvide...inggoodnow.AVI Mystery Flowmaster, 2.5" pipe, no cat. Stock Y-pipe. I'm thinking about a Dynomax later down the road. Not sure what I want to do yet.
	[Reply w/Quote]

01-20-2007, 05:30 PM	#85
636andy636 Can-EH-Dian Age: 20 Join Date: Feb 2006 Posts: 460 Location: Canada User is: OffLine	Re: Post Audio/Video Clips Here 2.8L S10. 0-70mph My S10. 2.8L, unknown after market muffler, flipped air lid, K&N air cleaner.
	[Reply w/Quote]