Post Audio/Video Clips Here

Dr. Steve · 06-11-2009, 12:30 AM

Oh BTW, Muffs are back on (flow 40 dual outlet, 2.5 to 3.5) and it is back to normal which is...

mobileaudio219 · 07-12-2009, 01:00 AM

Here's Mine...

93 s10 with 4.3. Flowsound single, dual out with 3" x 24" stainless tips...

http://www.youtube.com/watch?v=MUyGEaIxhCI

Zr2Sputnik360 · 07-20-2009, 11:02 PM

4.3 with 3" in/out Dynatech Powercat and 3" in dual 2.5" out Flowmaster 40 with 3x18 tips.

Im the blue truck.

http://www.youtube.com/watch?v=rgzfEAsH9Cc

Dr. Steve · 07-21-2009, 08:22 PM

pretty cool man, wish we had dunes like that round here!!!

_l_DeViL_l_ · 07-21-2009, 11:28 PM

At idle, warm. Exhaust: 2.5" exhaust, JBA shorty headers, Magnaflow High Flow cat, Flowmaster 40 series muffler.

Couple revs, audio didn't turn out as good as I would of liked, just a little Sony Cybershot though so I guess I can't expect too much.

03blazer · 07-22-2009, 11:33 PM

Quote: Originally Posted by Dr. Steve

Here is my RASPY.....NASTY ass SHIT with no muffs, just highflow cat and JBA headers...

I hope you weren't being serious about the no muffler part... I can see a muffler plain as day in the vid...

disturbing V6 · 07-23-2009, 01:36 AM

Here is a vid a friend of mine from about a little over a year back put together after we got the new motor in. Its kinda long and most of the stuff is not on the truck or been changed, but it still today sounds close to the same

4.3L Long tubes full dual 3 inch exhaust through flowmaster outlaws.http://video.cardomain.com/clip.aspx...22734F07C9B26D

03zq8s10 · 07-23-2009, 03:13 AM

Quote: Originally Posted by disturbing V6

Here is a vid a friend of mine from about a little over a year back put together after we got the new motor in. Its kinda long and most of the stuff is not on the truck or been changed, but it still today sounds close to the same

4.3L Long tubes full dual 3 inch exhaust through flowmaster outlaws.http://video.cardomain.com/clip.aspx...22734F07C9B26D

That's the best sounding 4.3 I've heard yet. Also very nice times. That thing would smoke the hell out of a 350 from that video I saw. 11:42 is moving! nice job. What's the specs on the cam/heads?

disturbing V6 · 07-23-2009, 08:37 AM

hydraulic flat tappet since its a none roller block. 593 on intake a 268 and 603 at 267. 3500 to 8000 RPMs. The 11.42 is the old motor there is another vid of the new motor doing 11.0 at 118.

12sws27 · 07-23-2009, 06:38 PM

Hooker Max Flow, 2.5" in/out offset/center. No cat, Stock "Y" and tail pipe.

Dr. Steve · 07-24-2009, 03:37 PM

nice n' raspy

Dr. Steve · 07-24-2009, 03:39 PM

Quote: Originally Posted by 03blazer

I hope you weren't being serious about the no muffler part... I can see a muffler plain as day in the vid...

i meant hollowed out...sorry

12sws27 · 07-24-2009, 04:38 PM

Quote: Originally Posted by Dr. Steve

nice n' raspy

Yeah, I gotta do something about that.

Dr. Steve · 07-24-2009, 05:11 PM

bigger y-pipe did it for me

12sws27 · 07-24-2009, 05:21 PM

Sooner or later I'll get one. That or I'll squeeze some long tubes in there. I still have the stock 2.25" tail on the thing too.

556mm · 07-25-2009, 12:04 AM

Quote: Originally Posted by disturbing V6

Here is a vid a friend of mine from about a little over a year back put together after we got the new motor in. Its kinda long and most of the stuff is not on the truck or been changed, but it still today sounds close to the same

4.3L Long tubes full dual 3 inch exhaust through flowmaster outlaws.http://video.cardomain.com/clip.aspx...22734F07C9B26D

Dr. Steve · 07-27-2009, 11:05 PM

ha ha x2

1sic03x · 07-27-2009, 11:50 PM

New setup. Cherry Bomb "Extreme" Muffler SI/DO, stock cat, 4.3 blah blah blah...

Dr. Steve · 07-27-2009, 11:54 PM

I like it Andy

1sic03x · 07-27-2009, 11:57 PM

Thanks Steve, I do to, wasn't to sure how a single chamber muffler would sound but I like it.

Dr. Steve · 07-28-2009, 12:07 AM

yeah man, I have single chamber flowmaster "race" series ones on my 77 Nova w/ a 454 and I love it.

Licenseplate · 08-08-2009, 01:55 AM

heres an updated video on mine
2.8v6, headers, flow 40, hiflow cat
http://www.youtube.com/watch?v=tLj5oDul_-8

in4lo · 08-18-2009, 01:07 AM

Quote: Originally Posted by JasonC

For some reason my 2.8 likes to idle like this sometimes. But i kind of like it. It has a single in dual out Flowmaster and no cat.

http://www.youtube.com/watch?v=aKtBgbDRZfE

That's awesome. Makes me wonder why it does that though.

Dr. Steve · 08-18-2009, 08:31 AM

rentedmule · 08-27-2009, 05:48 PM

Quote: Originally Posted by rentedmule

2.5" catback with a dynomax ultraflow - the rest of the exhaust is stock

http://videos.streetfire.net/video/6...81013a342e.htm

I swapped in an SLP 2.25" y-pipe and deleted the pre-cat. Everything else is basically the same

03S-dime_xtreme · 09-20-2009, 06:48 PM

Quote: Originally Posted by disturbing V6

Here is a vid a friend of mine from about a little over a year back put together after we got the new motor in. Its kinda long and most of the stuff is not on the truck or been changed, but it still today sounds close to the same

4.3L Long tubes full dual 3 inch exhaust through flowmaster outlaws.http://video.cardomain.com/clip.aspx...22734F07C9B26D

holy hell i wish my cam sounded like that but i dont have the lift u do either. very nicer sound!

03S-dime_xtreme · 09-20-2009, 06:54 PM

just a little clip of my truck didnt know how it was gonna turn out being record on my ifone. thinking of doing a rpm run thru next time.

03S-dime_xtreme · 09-20-2009, 06:54 PM

forgot the link

disturbing V6 · 09-20-2009, 07:58 PM

Quote: Originally Posted by 03S-dime_xtreme

holy hell i wish my cam sounded like that but i dont have the lift u do either. very nicer sound!

Thats my old hydralic flat tappet cam. I should have my new solid roller this week once Crower ships it. It sitting at 680 intake lift 707 exhaust lift. Once its done and running I'll post a new video.

03S-dime_xtreme · 09-20-2009, 08:09 PM

Quote: Originally Posted by disturbing V6

Thats my old hydralic flat tappet cam. I should have my new solid roller this week once Crower ships it. It sitting at 680 intake lift 707 exhaust lift. Once its done and running I'll post a new video.

yea man i defently want to see and hear that bad boy crackle and pop!

Dr. Steve · 09-27-2009, 01:56 PM

Krusher · 09-27-2009, 04:01 PM

Quote: Originally Posted by disturbing V6

Here is a vid a friend of mine from about a little over a year back put together after we got the new motor in. Its kinda long and most of the stuff is not on the truck or been changed, but it still today sounds close to the same

4.3L Long tubes full dual 3 inch exhaust through flowmaster outlaws.http://video.cardomain.com/clip.aspx...22734F07C9B26D

Blind folded, I would have argued that it was a V8 instead of a V6! I had to see the 3 tubes from the head before I was 100% convinced! AWSOME sounding !

Dr. Steve · 10-19-2009, 02:20 AM

agreed man!

PHATDAN420 · 10-21-2009, 04:04 PM

I bought this truck from a guy that worked at a muffler shop an he made his own exhauste an it dont sound that bad.but the end of the pipe is like 6 inches wide. looks likes it came off a diesle pipe

Dr. Steve · 10-21-2009, 07:48 PM

sounds raspy, oh yeah its a 4 banger...soooo...i guess its good then huh?

PHATDAN420 · 10-22-2009, 07:42 PM

hahaha i dont even like it but i only got to wait a couple more months of the 4 banger but i never had a choice of echasute but i cant complain

Dr. Steve · 10-22-2009, 08:28 PM

i wouldn't complain either.

PHATDAN420 · 10-22-2009, 08:59 PM

but mann u should see the end pipe of that exhuaste it made me laugh when i first saw it

Dr. Steve · 10-22-2009, 09:16 PM

LOL...get a better shot of it...

PHATDAN420 · 10-22-2009, 10:43 PM

kk i will right now

hahahaha this is the most pointless exhaust IV ever seen

Dr. Steve · 10-23-2009, 12:54 PM

W O W

is all I have to say about that right there...

hammer dawn · 10-24-2009, 01:12 AM

ya X2

, theres a lot of of vid's on here but i couldent find a vid of a 4.3L with the pre cat taken out...... Does anyone know if there are any vids. like that on this site?....thanks

Dr. Steve · 10-24-2009, 04:53 AM

yup...mine...but I also have a 2.50" y-pipe no pre-cat and magnaflow high flow cat followed by a dual out flowmaster....interested?

Dr. Steve · 10-24-2009, 04:56 AM

hammer dawn · 10-24-2009, 10:03 PM

Quote: Originally Posted by Dr. Steve

thanks dude thats raelly appreaciated

02dime · 10-25-2009, 03:22 PM

http://www.youtube.com/watch?v=u1tGY...eature=channel its a 5.3 with sanderson shorties and true 2.5" duals to magnaflow wideopens runs right to the back to 3" tips

Dr. Steve · 10-25-2009, 10:36 PM

what kind of cam you running?

hammer dawn · 10-26-2009, 12:31 AM

that thing sounds mean as hell

hammer dawn · 10-26-2009, 12:34 AM

Quote: Originally Posted by Dr. Steve

yup...mine...but I also have a 2.50" y-pipe no pre-cat and magnaflow high flow cat followed by a dual out flowmaster....interested?

hey DR. steve when you took out the pre cat, was it when you put on the new y pipe? and was it significanly louder?...thanks for the vid. ....sounds good

Dr. Steve · 10-26-2009, 06:14 AM

not significantly louder I would not say...I think the 2.50" ypipe did that...and I did eliminate it when I did a total overhaul of my system, manifolds back.

06-11-2009, 12:30 AM	#451
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here Oh BTW, Muffs are back on (flow 40 dual outlet, 2.5 to 3.5) and it is back to normal which is...
	[Reply w/Quote]

07-12-2009, 01:00 AM	#452
mobileaudio219 Registered User Age: 26 Join Date: Apr 2005 Posts: 359 Location: User is: OffLine	Re: Post Audio/Video Clips Here Here's Mine... 93 s10 with 4.3. Flowsound single, dual out with 3" x 24" stainless tips... http://www.youtube.com/watch?v=MUyGEaIxhCI Last edited by mobileaudio219 : 07-12-2009 at 01:01 AM.
	[Reply w/Quote]

07-20-2009, 11:02 PM	#453
Zr2Sputnik360 Never Enough Light Age: 19 Join Date: Aug 2008 Posts: 91 Location: User is: OffLine	Re: Post Audio/Video Clips Here 4.3 with 3" in/out Dynatech Powercat and 3" in dual 2.5" out Flowmaster 40 with 3x18 tips. Im the blue truck. http://www.youtube.com/watch?v=rgzfEAsH9Cc
	[Reply w/Quote]

07-21-2009, 08:22 PM	#454
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here pretty cool man, wish we had dunes like that round here!!!
	[Reply w/Quote]

07-21-2009, 11:28 PM	#455
_l_DeViL_l_ Registered User Join Date: Sep 2007 Posts: 98 Location: User is: Online	Re: Post Audio/Video Clips Here At idle, warm. Exhaust: 2.5" exhaust, JBA shorty headers, Magnaflow High Flow cat, Flowmaster 40 series muffler. Couple revs, audio didn't turn out as good as I would of liked, just a little Sony Cybershot though so I guess I can't expect too much.
	[Reply w/Quote]

07-22-2009, 11:33 PM	#456
03blazer Gettin' ready for V8! Join Date: Dec 2007 Posts: 337 Location: Gulfport, MS User is: Online	Re: Post Audio/Video Clips Here Quote: Originally Posted by Dr. Steve Here is my RASPY.....NASTY ass SHIT with no muffs, just highflow cat and JBA headers... I hope you weren't being serious about the no muffler part... I can see a muffler plain as day in the vid...
	[Reply w/Quote]

07-23-2009, 01:36 AM	#457
disturbing V6 WICKED 6 RACING Age: 26 Join Date: Jul 2009 Posts: 297 Location: MD User is: OffLine	Re: Post Audio/Video Clips Here Here is a vid a friend of mine from about a little over a year back put together after we got the new motor in. Its kinda long and most of the stuff is not on the truck or been changed, but it still today sounds close to the same 4.3L Long tubes full dual 3 inch exhaust through flowmaster outlaws.http://video.cardomain.com/clip.aspx...22734F07C9B26D
	[Reply w/Quote]

07-23-2009, 03:13 AM	#458
03zq8s10 Got boost? Age: 22 Join Date: Mar 2007 Posts: 804 Location: Killen, Alabama User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by disturbing V6 Here is a vid a friend of mine from about a little over a year back put together after we got the new motor in. Its kinda long and most of the stuff is not on the truck or been changed, but it still today sounds close to the same 4.3L Long tubes full dual 3 inch exhaust through flowmaster outlaws.http://video.cardomain.com/clip.aspx...22734F07C9B26D That's the best sounding 4.3 I've heard yet. Also very nice times. That thing would smoke the hell out of a 350 from that video I saw. 11:42 is moving! nice job. What's the specs on the cam/heads?
	[Reply w/Quote]

07-23-2009, 08:37 AM	#459
disturbing V6 WICKED 6 RACING Age: 26 Join Date: Jul 2009 Posts: 297 Location: MD User is: OffLine	Re: Post Audio/Video Clips Here hydraulic flat tappet since its a none roller block. 593 on intake a 268 and 603 at 267. 3500 to 8000 RPMs. The 11.42 is the old motor there is another vid of the new motor doing 11.0 at 118.
	[Reply w/Quote]

07-23-2009, 06:38 PM	#460
12sws27 Traction not found here! Join Date: Oct 2007 Posts: 678 Location: Miami,FL User is: OffLine	Re: Post Audio/Video Clips Here Hooker Max Flow, 2.5" in/out offset/center. No cat, Stock "Y" and tail pipe.
	[Reply w/Quote]

07-24-2009, 03:37 PM	#461
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here nice n' raspy
	[Reply w/Quote]

07-24-2009, 03:39 PM	#462
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 03blazer I hope you weren't being serious about the no muffler part... I can see a muffler plain as day in the vid... i meant hollowed out...sorry
	[Reply w/Quote]

07-24-2009, 04:38 PM	#463
12sws27 Traction not found here! Join Date: Oct 2007 Posts: 678 Location: Miami,FL User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by Dr. Steve nice n' raspy Yeah, I gotta do something about that.
	[Reply w/Quote]

07-24-2009, 05:11 PM	#464
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here bigger y-pipe did it for me
	[Reply w/Quote]

07-24-2009, 05:21 PM	#465
12sws27 Traction not found here! Join Date: Oct 2007 Posts: 678 Location: Miami,FL User is: OffLine	Re: Post Audio/Video Clips Here Sooner or later I'll get one. That or I'll squeeze some long tubes in there. I still have the stock 2.25" tail on the thing too.
	[Reply w/Quote]

07-25-2009, 12:04 AM	#466
556mm &amp;lt;3 redheads Age: 27 Join Date: Oct 2005 Posts: 25,729 Location: User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by disturbing V6 Here is a vid a friend of mine from about a little over a year back put together after we got the new motor in. Its kinda long and most of the stuff is not on the truck or been changed, but it still today sounds close to the same 4.3L Long tubes full dual 3 inch exhaust through flowmaster outlaws.http://video.cardomain.com/clip.aspx...22734F07C9B26D
	[Reply w/Quote]

07-27-2009, 11:05 PM	#467
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here ha ha x2
	[Reply w/Quote]

07-27-2009, 11:50 PM	#468
1sic03x 5.3 LSx bitches Age: 18 Join Date: Oct 2007 Posts: 1,042 Location: Augusta, GA User is: OffLine	Re: Post Audio/Video Clips Here New setup. Cherry Bomb "Extreme" Muffler SI/DO, stock cat, 4.3 blah blah blah...
	[Reply w/Quote]

07-27-2009, 11:54 PM	#469
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here I like it Andy
	[Reply w/Quote]

07-27-2009, 11:57 PM	#470
1sic03x 5.3 LSx bitches Age: 18 Join Date: Oct 2007 Posts: 1,042 Location: Augusta, GA User is: OffLine	Re: Post Audio/Video Clips Here Thanks Steve, I do to, wasn't to sure how a single chamber muffler would sound but I like it.
	[Reply w/Quote]

07-28-2009, 12:07 AM	#471
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here yeah man, I have single chamber flowmaster "race" series ones on my 77 Nova w/ a 454 and I love it.
	[Reply w/Quote]

08-08-2009, 01:55 AM	#472
Licenseplate baby blue Age: 20 Join Date: Sep 2006 Posts: 712 Location: BC, Canada User is: OffLine	Re: Post Audio/Video Clips Here heres an updated video on mine 2.8v6, headers, flow 40, hiflow cat http://www.youtube.com/watch?v=tLj5oDul_-8
	[Reply w/Quote]

08-18-2009, 01:07 AM	#473
in4lo Registered User Age: 21 Join Date: Nov 2008 Posts: 5 Location: User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by JasonC For some reason my 2.8 likes to idle like this sometimes. But i kind of like it. It has a single in dual out Flowmaster and no cat. http://www.youtube.com/watch?v=aKtBgbDRZfE That's awesome. Makes me wonder why it does that though.
	[Reply w/Quote]

08-18-2009, 08:31 AM	#474
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here Lol
	[Reply w/Quote]

08-27-2009, 05:48 PM	#475
rentedmule got cones? Age: 32 Join Date: May 2006 Posts: 1,287 Location: Edmonton, AB User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by rentedmule 2.5" catback with a dynomax ultraflow - the rest of the exhaust is stock http://videos.streetfire.net/video/6...81013a342e.htm I swapped in an SLP 2.25" y-pipe and deleted the pre-cat. Everything else is basically the same
	[Reply w/Quote]

09-20-2009, 06:48 PM	#476
03S-dime_xtreme 28Hz Age: 26 Join Date: Nov 2008 Posts: 160 Location: Joliet, IL User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by disturbing V6 Here is a vid a friend of mine from about a little over a year back put together after we got the new motor in. Its kinda long and most of the stuff is not on the truck or been changed, but it still today sounds close to the same 4.3L Long tubes full dual 3 inch exhaust through flowmaster outlaws.http://video.cardomain.com/clip.aspx...22734F07C9B26D holy hell i wish my cam sounded like that but i dont have the lift u do either. very nicer sound!
	[Reply w/Quote]

09-20-2009, 06:54 PM	#477
03S-dime_xtreme 28Hz Age: 26 Join Date: Nov 2008 Posts: 160 Location: Joliet, IL User is: OffLine	Re: Post Audio/Video Clips Here just a little clip of my truck didnt know how it was gonna turn out being record on my ifone. thinking of doing a rpm run thru next time. Last edited by 03S-dime_xtreme : 09-20-2009 at 06:56 PM.
	[Reply w/Quote]

09-20-2009, 06:54 PM	#478
03S-dime_xtreme 28Hz Age: 26 Join Date: Nov 2008 Posts: 160 Location: Joliet, IL User is: OffLine	Re: Post Audio/Video Clips Here forgot the link Last edited by 03S-dime_xtreme : 09-20-2009 at 06:56 PM.
	[Reply w/Quote]

09-20-2009, 07:58 PM	#479
disturbing V6 WICKED 6 RACING Age: 26 Join Date: Jul 2009 Posts: 297 Location: MD User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by 03S-dime_xtreme holy hell i wish my cam sounded like that but i dont have the lift u do either. very nicer sound! Thats my old hydralic flat tappet cam. I should have my new solid roller this week once Crower ships it. It sitting at 680 intake lift 707 exhaust lift. Once its done and running I'll post a new video.
	[Reply w/Quote]

09-20-2009, 08:09 PM	#480
03S-dime_xtreme 28Hz Age: 26 Join Date: Nov 2008 Posts: 160 Location: Joliet, IL User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by disturbing V6 Thats my old hydralic flat tappet cam. I should have my new solid roller this week once Crower ships it. It sitting at 680 intake lift 707 exhaust lift. Once its done and running I'll post a new video. yea man i defently want to see and hear that bad boy crackle and pop!
	[Reply w/Quote]

09-27-2009, 01:56 PM	#481
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here x2!
	[Reply w/Quote]

09-27-2009, 04:01 PM	#482
Krusher Registered User Join Date: Oct 2008 Posts: 36 Location: Empire, Alabama User is: OffLine	Re: Post Audio/Video Clips Here Quote: Originally Posted by disturbing V6 Here is a vid a friend of mine from about a little over a year back put together after we got the new motor in. Its kinda long and most of the stuff is not on the truck or been changed, but it still today sounds close to the same 4.3L Long tubes full dual 3 inch exhaust through flowmaster outlaws.http://video.cardomain.com/clip.aspx...22734F07C9B26D Blind folded, I would have argued that it was a V8 instead of a V6! I had to see the 3 tubes from the head before I was 100% convinced! AWSOME sounding !
	[Reply w/Quote]

10-19-2009, 02:20 AM	#483
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here agreed man!
	[Reply w/Quote]

10-21-2009, 04:04 PM	#484
PHATDAN420 Registered User Age: 19 Join Date: Oct 2009 Posts: 63 Location: Fort Mcmurray Alberta Canada User is: OffLine	Re: Post Audio/Video Clips Here I bought this truck from a guy that worked at a muffler shop an he made his own exhauste an it dont sound that bad.but the end of the pipe is like 6 inches wide. looks likes it came off a diesle pipe Last edited by PHATDAN420 : 10-21-2009 at 04:06 PM.
	[Reply w/Quote]

10-21-2009, 07:48 PM	#485
Dr. Steve Keepin' it Gangsta! Age: 27 Join Date: May 2006 Posts: 11,281 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: Post Audio/Video Clips Here sounds raspy, oh yeah its a 4 banger...soooo...i guess its good then huh?
	[Reply w/Quote]