Project: Time for a change.

[90blueS10]

Not a big deal. Ill keep that in mind. Thanks.

[90blueS10]

So im figuring up what else i need, bags, compressors, tank, and wiring.
still a little unsure on which bags i want to run, doms or slams, and which compressors i want.

I've been considering getting new 3/8s valves as well. What are your guys' opinions?

[98lowerednewproje]

Doms
Viviar 280's (one of them)
1/4" valves

But I dun no nuttin 'bout none of that dere hydro systems.

[90blueS10]

Could a moderator please remove post #s 403 and 404. Thanks.

[littledevil4802]

I love my doms and I have 2 460s but I want to go edc a.s.a.p. Also 3/8 valves are nice.

[wildman ss]

dominators and either 480's or 380's
honestly if you plan on going with an edc down the road i'd just do one 380 or 480, fill times arent that bad on a 5 gallon especially if you're not switch happy

[90blueS10]

I was thinking 380s for now

[Tuckin15's]

I think you should run some slams re6's front and re7's rear with dual 380's

[TRPLS10]

i think you should get most the work done then worry about that bra!!



also try and come down for automobilia during the summer!

[blake293209]

Quote: Originally Posted by wildman ss

dominators and either 480's or 380's
honestly if you plan on going with an edc down the road i'd just do one 380 or 480, fill times arent that bad on a 5 gallon especially if you're not switch happy

x2

I have ran plenty dom's and plenty 480's 450's, 444's, 380's etc. I've never had a problem with any of them except for check valves. I like dom bags since they're a little cheaper and seem to be just as good to me as any of them. On my tacoma i ran four 380's on ten gallons and on my blazer i ran two 380's on six gallons i think. They seemed to perform well although I didn't like the 10 gallons, took too long imo.

I think you'll be happy with either compressor(s) you chose.

[OtownDime]

What a piece





JK




You, me, sexytime?

[90blueS10]

Haha, not right now.

[90blueS10]

Stole the zq8s off of this for the jimmy, pulled my cragars out of the pile to roll around on and forgot what they looked like when i took them off.

Just a little bit of what this truck has gone through.

[TRPLS10]

Dirty as hell lol

[90blueS10]

Thats what the bottom of my truck looks like lol

[superbee]

first time i ever saw this thread too.


those are some nice control arms.

[90blueS10]

Wow chad, wtf. Both of my threads and you just "found" them

[TRPLS10]

2 threads and very little progress on both

[superbee]

Quote: Originally Posted by TRPLS10

2 threads and very little progress on both

hahah he said it, not me

[superbee]

but seriously, as far as s10forum goes, i usually only scour the thread names and click on ones that may contain potential trolling or ones that include the words LSX (and/or) T56.

[98lowerednewproje]

Quote: Originally Posted by superbee

but seriously, as far as s10forum goes, i usually only scour the thread names and click on ones that may contain potential trolling or ones that include the words LSX (and/or) T56.

Biased much? lol

[TRPLS10]

haha

[superbee]

[2k2indigoxtreme]

Quote: Originally Posted by 90blueS10

Started digging through my LCA box today, i wanted to show you guys who hadn't seen the sway bar setup what it looks like. I'm super impressed with it.

I had their first production set of swaybar endlink arms on my old Blazer and I loved them. My next project is just getting de-humped lowers, but I plan on ordering a set of their endlinks and fabbing brackets to work. Best mod I did for that truck!

[90blueS10]

Sweet dude, makes me feel better about splurging for them

[roademon]

Those are some SEXY control arms!

[90blueS10]

Quote: Originally Posted by roademon

Those are some SEXY control arms!

I named them heather.

[roademon]

and by the way I think you have me convinced to bag mine lol. At least the front for now.

[90blueS10]

Quote: Originally Posted by roademon

and by the way I think you have me convinced to bag mine lol. At least the front for now.

Do it.

[Driveway Kustoms]

DO IT! no balls,....wait..

[roademon]

The back half is just a lot of work... you make it look so easy and with no welder and no way of even cutting frame it makes it kinda hard to build.

[90blueS10]

lol i make it look easy? no way.

[Tuckin15's]

LOL Ryan you have a bolt on link it can't be that hard...?

[TRPLS10]

this shoulda been done along time ago.. along with the jimmy.. thats a days of work! haha

[90blueS10]

Quote: Originally Posted by Tuckin15's

LOL Ryan you have a bolt on link it can't be that hard...?

Its not, I just work on it like once a month.

[2k2indigoxtreme]

Quote: Originally Posted by roademon

The back half is just a lot of work... you make it look so easy and with no welder and no way of even cutting frame it makes it kinda hard to build.

Do it all at the same time! They make fully bolt on kits so do it all!

[roademon]

Money..... lol. I'm in the midst of buying a house, funds are tight and I'd like to just make it able to get over speed bumps for now haha. Back half later.

[2k2indigoxtreme]

Oh I hear ya, I just made that purchase. I dont even have a mini at the moment. its killing me inside haha

[s10kid17]

So this project needs more progress. Just sayin.

[90blueS10]

I just sorta got the jimmy going. Cut me some slack, plus im saving for a big purchase

[s10kid17]

Big purchase eh??

[90blueS10]

yes sir.

[blake293209]

I know what you're buying.

[Tuckin15's]

A massive rubber purple dildo.

[90blueS10]

Quote: Originally Posted by Tuckin15's

A massive rubber purple dildo.

No.

[TRPLS10]

get this thing done already bra!

[90blueS10]

My zq8 sway bar came in yesterday.

Went to put my 5 link on, lost motivation because i couldn't find pieces and the fact theres so much stuff around my truck.

[98lowerednewproje]

Then move a few things and get to it!

[blake293209]

You aren't allowed to lose motivation when putting together a bolt on 5 link. Only when doing a body drop!

[TRPLS10]

haha this^