[Project] Parts Waiter

Dr. Pepper · 07-21-2008, 06:58 PM

thanks man. seems like a lot of people got pictures.

and it made it to and from south carolina, so im pretty happy with it. only problem was the fan relay went out, but we just bypassed it. all good though.

vince921 · 07-21-2008, 10:52 PM

what was your question about the dipstick cant find it lol ?

Dr. Pepper · 07-22-2008, 06:35 PM

no, i fingered it out. i needed to bend it more than what it was. and it doesnt seem to be passing any oil. its still as full as when it was before. everyone else says they had to add oil like everyday, and ive ran it about 20 times atleast, and still full. i dont get it. . .

Big_Bake · 07-27-2008, 04:37 PM

so how are those ball valves working as controls. you got a real clean setup and i'm thinking about trying to do the same with mine. can you just barely crack em open and have a real slow fill? then wide open and be hoppin lol?

Dr. Pepper · 07-28-2008, 01:59 AM

there about half way right now, and the front still comes close to hopping with 3/8" valves. havent really messed with them too much, but they work great though. glad i put them in.

and i need to do some stuff. my thread is dying lol. my interior pieces are almost done. one spot i had to fill, and still have yet to sand it. primer soon. . .

o yeah, trailor balls are fun to drag.

***droppedss*** · 07-28-2008, 08:48 AM

lol hurr up!

Getbored · 07-28-2008, 01:33 PM

Quote: Originally Posted by Dr. Pepper

o yeah, trailor balls are fun to drag.

oooo my

pix

Dr. Pepper · 07-28-2008, 11:05 PM

i got video son.

next time ill find someone who can actually hold the camera still lol. that camera sucks balls too.

vince921 · 07-28-2008, 11:21 PM

what are ya draggin?

my2ks10xtreme · 07-29-2008, 12:07 AM

Quote: Originally Posted by vince921

what are ya draggin?

Quote: Originally Posted by Dr. Pepper

o yeah, trailor balls are fun to drag.

I'm assuming by this post hes draggin hitch balls.

Dr. Pepper, do you have any pics of the hitch ball set-up in the rear? Where did you mount them to? Thanks!

malcolm H · 07-29-2008, 12:34 AM

Very clean truck man! Good job!

Dr. Pepper · 07-29-2008, 01:32 AM

like that for the most part. works pretty good for what it is. id rather have something towards the front, just because it looks badass.

and thanks.

Getbored · 07-29-2008, 09:42 AM

eric drags his balls......
wiseeeeek

Dr. Pepper · 07-31-2008, 02:05 AM

got this done today. 05+ pontiac grand prix vents.

shaved lock hole

have the panel under the steering wheel by your knees almost done, and the dash bezel almost done. ran out of primer. i might want to mold the whole piece where it mounts in the dash to the dash itself, but thats more work. who knows though.

kovz34 · 07-31-2008, 10:28 AM

that looks great man!

Dr. Pepper · 07-31-2008, 11:42 AM

thanks. its so damn hot where i do this stuff, and it makes you not want to work. hopefully i have one more time out there and ill be done for awhile.

my2ks10xtreme · 07-31-2008, 02:36 PM

Looks good! IMO I think you should mold in the passanger side vent so there is no seam shown, other than that looks sick!

xtucking22s · 07-31-2008, 02:37 PM

Quote: Originally Posted by my2ks10xtreme

Looks good! IMO I think you should mold in the passanger side vent so there is no seam shown, other than that looks sick!

agreed. looks great though!

sonomaguy · 08-01-2008, 12:21 AM

Both mods very nice, shaved lock hole is very subtle too.

Dr. Pepper · 08-01-2008, 01:18 AM

i was thinkin the same thing, hence why i mentioned it in that last part lol. but that means pulling the dash, and im not really up for that right now. i still think it would look good after its painted. primer is deceiving.

and thanks for the good words.

lowridinrebel · 08-01-2008, 03:42 PM

I'm shaving the locks also....dash is 90% done....But definatley looks good with things shaved that are subtle.....Good workk

Dr. Pepper · 08-02-2008, 12:59 AM

thanks.

Dr. Pepper · 08-10-2008, 06:51 PM

wow, this thread died. . . .

time to wake it up. dash is done, knee panel is done, and previously posted door cups and pass vent are done.

and the sky looked cool coming home from carlisle, so we stopped for some pics. brothers h2

and some of just mine

blazed00 · 08-10-2008, 08:01 PM

damn those rims made a huge difference, looks awsome

kovz34 · 08-10-2008, 09:44 PM

dude, those are some awesome pics you got there. I would frame a few of those! haha. Truck looked good at the show and it was nice meeting you. Here are a couple I got of your truck

malcolm H · 08-10-2008, 10:06 PM

so clean. love the air vents and dash work.

sonomaguy · 08-10-2008, 10:07 PM

Quote: Originally Posted by Dr. Pepper

Boy, you guys sure don't have much for shoulders on the side of the road do you. One little drift over and you're off the road. Trucks look great by the way, as does the dash.

slmmedxtrme03 · 08-10-2008, 10:12 PM

as always, looks great bro!

xtucking22s · 08-10-2008, 11:42 PM

looks great! interior is awesome!

Dr. Pepper · 08-11-2008, 05:56 PM

Quote: Originally Posted by blazed00

damn those rims made a huge difference, looks awsome

yeah, its like night and day. only thing i dont like is i cant ride as low as i used to. every little turn, im in the fender.

Quote: Originally Posted by kovz34

dude, those are some awesome pics you got there. I would frame a few of those! haha. Truck looked good at the show and it was nice meeting you. Here are a couple I got of your truck

yeah man, how did you know who i was? there was like 20 people under the tent lol. thanks for the pics. last picture looks like a mag shot!

Quote: Originally Posted by sonomaguy

Boy, you guys sure don't have much for shoulders on the side of the road do you. One little drift over and you're off the road. Trucks look great by the way, as does the dash.

its not too bad unless your on a side street. try driving that hummer on one

and thanks.

Quote: Originally Posted by slmmedxtrme03

as always, looks great bro!

thanks.

[quote=xtucking22s]looks great! interior is awesome!

thanks. wait til its done! ive got more ideas. . .

kovz34 · 08-11-2008, 07:04 PM

Quote: Originally Posted by Dr. Pepper

yeah man, how did you know who i was? there was like 20 people under the tent lol. thanks for the pics. last picture looks like a mag shot!

ida know, as weird as it sounds, I guess I remembered seeing a picture of you on your myspace or something. Looked kinda familiar so I just figured I'd ask if that was you, haha.

07-21-2008, 06:58 PM	#251
Dr. Pepper cokehead Age: 19 Join Date: Apr 2005 Posts: 2,125 Location: Libertytown, MD- near Frederick User is: OffLine	Re: [Project] Parts Waiter thanks man. seems like a lot of people got pictures. and it made it to and from south carolina, so im pretty happy with it. only problem was the fan relay went out, but we just bypassed it. all good though.
	[Reply w/Quote]

07-21-2008, 10:52 PM	#252
vince921 Registered User Join Date: Aug 2006 Posts: 1,933 Location: Calvert County Maryland User is: OffLine	Re: [Project] Parts Waiter what was your question about the dipstick cant find it lol ?
	[Reply w/Quote]

07-22-2008, 06:35 PM	#253
Dr. Pepper cokehead Age: 19 Join Date: Apr 2005 Posts: 2,125 Location: Libertytown, MD- near Frederick User is: OffLine	Re: [Project] Parts Waiter no, i fingered it out. i needed to bend it more than what it was. and it doesnt seem to be passing any oil. its still as full as when it was before. everyone else says they had to add oil like everyday, and ive ran it about 20 times atleast, and still full. i dont get it. . .
	[Reply w/Quote]

07-27-2008, 04:37 PM	#254
Big_Bake dropt Age: 19 Join Date: Apr 2007 Posts: 1,746 Location: Norfolk, VA User is: OffLine	Re: [Project] Parts Waiter so how are those ball valves working as controls. you got a real clean setup and i'm thinking about trying to do the same with mine. can you just barely crack em open and have a real slow fill? then wide open and be hoppin lol?
	[Reply w/Quote]

07-28-2008, 01:59 AM	#255
Dr. Pepper cokehead Age: 19 Join Date: Apr 2005 Posts: 2,125 Location: Libertytown, MD- near Frederick User is: OffLine	Re: [Project] Parts Waiter there about half way right now, and the front still comes close to hopping with 3/8" valves. havent really messed with them too much, but they work great though. glad i put them in. and i need to do some stuff. my thread is dying lol. my interior pieces are almost done. one spot i had to fill, and still have yet to sand it. primer soon. . . o yeah, trailor balls are fun to drag. Last edited by Dr. Pepper : 07-28-2008 at 02:03 AM.
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

07-28-2008, 01:33 PM	#257
Getbored Registered User Age: 28 Join Date: Sep 2007 Posts: 445 Location: User is: OffLine	Re: [Project] Parts Waiter Quote: Originally Posted by Dr. Pepper o yeah, trailor balls are fun to drag. oooo my pix
	[Reply w/Quote]

07-28-2008, 11:05 PM	#258
Dr. Pepper cokehead Age: 19 Join Date: Apr 2005 Posts: 2,125 Location: Libertytown, MD- near Frederick User is: OffLine	Re: [Project] Parts Waiter i got video son. next time ill find someone who can actually hold the camera still lol. that camera sucks balls too.
	[Reply w/Quote]

07-28-2008, 11:21 PM	#259
vince921 Registered User Join Date: Aug 2006 Posts: 1,933 Location: Calvert County Maryland User is: OffLine	Re: [Project] Parts Waiter what are ya draggin?
	[Reply w/Quote]

07-29-2008, 12:07 AM	#260
my2ks10xtreme Real Men Wear Skirts!! Age: 24 Join Date: Nov 2007 Posts: 4,655 Location: NOR☆CAL User is: OffLine	Re: [Project] Parts Waiter Quote: Originally Posted by vince921 what are ya draggin? Quote: Originally Posted by Dr. Pepper o yeah, trailor balls are fun to drag. I'm assuming by this post hes draggin hitch balls. Dr. Pepper, do you have any pics of the hitch ball set-up in the rear? Where did you mount them to? Thanks!
	[Reply w/Quote]

07-29-2008, 12:34 AM	#261
malcolm H Layin hard on 20s Age: 26 Join Date: Apr 2007 Posts: 1,571 Location: Lexington, SC User is: OffLine	Re: [Project] Parts Waiter Very clean truck man! Good job!
	[Reply w/Quote]

07-29-2008, 01:32 AM	#262
Dr. Pepper cokehead Age: 19 Join Date: Apr 2005 Posts: 2,125 Location: Libertytown, MD- near Frederick User is: OffLine	Re: [Project] Parts Waiter like that for the most part. works pretty good for what it is. id rather have something towards the front, just because it looks badass. and thanks.
	[Reply w/Quote]

07-29-2008, 09:42 AM	#263
Getbored Registered User Age: 28 Join Date: Sep 2007 Posts: 445 Location: User is: OffLine	Re: [Project] Parts Waiter eric drags his balls...... wiseeeeek
	[Reply w/Quote]

07-31-2008, 02:05 AM	#264
Dr. Pepper cokehead Age: 19 Join Date: Apr 2005 Posts: 2,125 Location: Libertytown, MD- near Frederick User is: OffLine	Re: [Project] Parts Waiter got this done today. 05+ pontiac grand prix vents. shaved lock hole have the panel under the steering wheel by your knees almost done, and the dash bezel almost done. ran out of primer. i might want to mold the whole piece where it mounts in the dash to the dash itself, but thats more work. who knows though.
	[Reply w/Quote]

07-31-2008, 10:28 AM	#265
kovz34 I needs paint! Age: 23 Join Date: May 2006 Posts: 8,189 Location: Pittsburgh, PA User is: OffLine	Re: [Project] Parts Waiter that looks great man!
	[Reply w/Quote]

08-11-2008, 07:48 PM	#282
Wicked Mayhem i wouldnt undertsand Age: 20 Join Date: Nov 2002 Posts: 13,754 Location: League City, Texas User is: OffLine

07-31-2008, 11:42 AM	#266
Dr. Pepper cokehead Age: 19 Join Date: Apr 2005 Posts: 2,125 Location: Libertytown, MD- near Frederick User is: OffLine	Re: [Project] Parts Waiter thanks. its so damn hot where i do this stuff, and it makes you not want to work. hopefully i have one more time out there and ill be done for awhile.
	[Reply w/Quote]

07-31-2008, 02:36 PM	#267
my2ks10xtreme Real Men Wear Skirts!! Age: 24 Join Date: Nov 2007 Posts: 4,655 Location: NOR☆CAL User is: OffLine	Re: [Project] Parts Waiter Looks good! IMO I think you should mold in the passanger side vent so there is no seam shown, other than that looks sick!
	[Reply w/Quote]

07-31-2008, 02:37 PM	#268
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Parts Waiter Quote: Originally Posted by my2ks10xtreme Looks good! IMO I think you should mold in the passanger side vent so there is no seam shown, other than that looks sick! agreed. looks great though!
	[Reply w/Quote]

08-01-2008, 12:21 AM	#269
sonomaguy Scoop Age: 47 Join Date: Apr 2003 Posts: 1,395 Location: Alberta,Canada User is: OffLine	Re: [Project] Parts Waiter Both mods very nice, shaved lock hole is very subtle too.
	[Reply w/Quote]

08-01-2008, 01:18 AM	#270
Dr. Pepper cokehead Age: 19 Join Date: Apr 2005 Posts: 2,125 Location: Libertytown, MD- near Frederick User is: OffLine	Re: [Project] Parts Waiter i was thinkin the same thing, hence why i mentioned it in that last part lol. but that means pulling the dash, and im not really up for that right now. i still think it would look good after its painted. primer is deceiving. and thanks for the good words.
	[Reply w/Quote]

08-01-2008, 03:42 PM	#271
lowridinrebel Livin Life Low! Age: 25 Join Date: Apr 2005 Posts: 528 Location: Montreal Quebec, Canada User is: OffLine	Re: [Project] Parts Waiter I'm shaving the locks also....dash is 90% done....But definatley looks good with things shaved that are subtle.....Good workk
	[Reply w/Quote]

08-02-2008, 12:59 AM	#272
Dr. Pepper cokehead Age: 19 Join Date: Apr 2005 Posts: 2,125 Location: Libertytown, MD- near Frederick User is: OffLine	Re: [Project] Parts Waiter thanks.
	[Reply w/Quote]

08-10-2008, 06:51 PM	#273
Dr. Pepper cokehead Age: 19 Join Date: Apr 2005 Posts: 2,125 Location: Libertytown, MD- near Frederick User is: OffLine	Re: [Project] Parts Waiter wow, this thread died. . . . time to wake it up. dash is done, knee panel is done, and previously posted door cups and pass vent are done. and the sky looked cool coming home from carlisle, so we stopped for some pics. brothers h2 and some of just mine
	[Reply w/Quote]

08-10-2008, 08:01 PM	#274
blazed00 closet ricers ftL Age: 21 Join Date: Sep 2006 Posts: 3,185 Location: Wilm, NC User is: OffLine	Re: [Project] Parts Waiter damn those rims made a huge difference, looks awsome
	[Reply w/Quote]

08-10-2008, 09:44 PM	#275
kovz34 I needs paint! Age: 23 Join Date: May 2006 Posts: 8,189 Location: Pittsburgh, PA User is: OffLine	Re: [Project] Parts Waiter dude, those are some awesome pics you got there. I would frame a few of those! haha. Truck looked good at the show and it was nice meeting you. Here are a couple I got of your truck
	[Reply w/Quote]

08-10-2008, 10:06 PM	#276
malcolm H Layin hard on 20s Age: 26 Join Date: Apr 2007 Posts: 1,571 Location: Lexington, SC User is: OffLine	Re: [Project] Parts Waiter so clean. love the air vents and dash work.
	[Reply w/Quote]

08-10-2008, 10:07 PM	#277
sonomaguy Scoop Age: 47 Join Date: Apr 2003 Posts: 1,395 Location: Alberta,Canada User is: OffLine	Re: [Project] Parts Waiter Quote: Originally Posted by Dr. Pepper Boy, you guys sure don't have much for shoulders on the side of the road do you. One little drift over and you're off the road. Trucks look great by the way, as does the dash.
	[Reply w/Quote]

08-10-2008, 10:12 PM	#278
slmmedxtrme03 blacker then black X Join Date: Mar 2007 Posts: 796 Location: Tampa, Florida User is: OffLine	Re: [Project] Parts Waiter as always, looks great bro!
	[Reply w/Quote]

08-10-2008, 11:42 PM	#279
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Parts Waiter looks great! interior is awesome!
	[Reply w/Quote]

08-11-2008, 05:56 PM	#280
Dr. Pepper cokehead Age: 19 Join Date: Apr 2005 Posts: 2,125 Location: Libertytown, MD- near Frederick User is: OffLine	Re: [Project] Parts Waiter Quote: Originally Posted by blazed00 damn those rims made a huge difference, looks awsome yeah, its like night and day. only thing i dont like is i cant ride as low as i used to. every little turn, im in the fender. Quote: Originally Posted by kovz34 dude, those are some awesome pics you got there. I would frame a few of those! haha. Truck looked good at the show and it was nice meeting you. Here are a couple I got of your truck yeah man, how did you know who i was? there was like 20 people under the tent lol. thanks for the pics. last picture looks like a mag shot! Quote: Originally Posted by sonomaguy Boy, you guys sure don't have much for shoulders on the side of the road do you. One little drift over and you're off the road. Trucks look great by the way, as does the dash. its not too bad unless your on a side street. try driving that hummer on one and thanks. Quote: Originally Posted by slmmedxtrme03 as always, looks great bro! thanks. [quote=xtucking22s]looks great! interior is awesome! thanks. wait til its done! ive got more ideas. . .
	[Reply w/Quote]

08-11-2008, 07:04 PM	#281
kovz34 I needs paint! Age: 23 Join Date: May 2006 Posts: 8,189 Location: Pittsburgh, PA User is: OffLine	Re: [Project] Parts Waiter Quote: Originally Posted by Dr. Pepper yeah man, how did you know who i was? there was like 20 people under the tent lol. thanks for the pics. last picture looks like a mag shot! ida know, as weird as it sounds, I guess I remembered seeing a picture of you on your myspace or something. Looked kinda familiar so I just figured I'd ask if that was you, haha.
	[Reply w/Quote]