project: overtime dime - Page 3 - S-10 Forum
Reply
 
LinkBack Thread Tools
post #101 of 127 Old 07-12-2012, 11:51 PM
Registered User
 
MostHated.Dime's Avatar
 
Join Date: Aug 2009
Location: Houston
Age: 26
Posts: 419

User is: MostHated.Dime is offline
Re: project: overtime dime

looking good bro love the work and def love the all metal step side, keep it up


95 s10 sfbd ls swap-The Burrito
MostHated.Dime is offline  
Sponsored Links
Advertisement
 
post #102 of 127 Old 07-17-2012, 02:34 AM Thread Starter
Registered User
 
allkustoms's Avatar
 
Join Date: Mar 2010
Location: Langley B.C Canada
Age: 29
Posts: 88

User is: allkustoms is offline
Re: project: overtime dime

no pics today my camera decided to stop working so i have to find my old one
anyway i primed the bottom of the box saterday afternoon then went back saterday night and painted it and installed my upper control arms then sunday i went back and did most of the bodywork on the step shavers while the bed was still upsidedown today i flipped the bed back over im going to spray sealer in the morning and after work ill finish the rest of the bodywork spray primer on wednesday morning then hopefully i can paint it after work
allkustoms is offline  
post #103 of 127 Old 07-18-2012, 12:29 AM Thread Starter
Registered User
 
allkustoms's Avatar
 
Join Date: Mar 2010
Location: Langley B.C Canada
Age: 29
Posts: 88

User is: allkustoms is offline
Re: project: overtime dime

i went into work early as planned i got there for 6 am i had alittle sanding to do then i sprayed sealer i worked on finishing the body work throughout the day then stayed late to finish but i had to leave before i got it done i left at 7:45 pm and im thinking about going back and getting it done then spraying primer anyway i got a few pics



sealer sprayed i kinda wish i painted the truck this colour


drivers side almost done


and passenger side almost done
allkustoms is offline  
post #104 of 127 Old 07-18-2012, 01:05 AM
Registered User
 
Join Date: Nov 2011
Location: Hammond, LA
Age: 33
Posts: 72

User is: Sac1991 is offline
Re: project: overtime dime

Simple, different and very clean!

2003 Sonoma ZQ8 Reg Cab Stepside(Holy Crap Yellow)
Sac1991 is offline  
post #105 of 127 Old 07-18-2012, 01:06 AM
Registered User
 
CleanFreak's Avatar
 
Join Date: Apr 2012
Location: KANSAS
Age: 22
Posts: 174

User is: CleanFreak is offline
Re: project: overtime dime

wow i love that bed all of a sudden
CleanFreak is offline  
post #106 of 127 Old 07-18-2012, 05:35 PM
Registered User
 
TRPLS10's Avatar
 
Join Date: Jul 2008
Location: Wichita Ks
Age: 25
Posts: 3,789

User is: TRPLS10 is offline
Re: project: overtime dime

cant wait to see it done!
TRPLS10 is offline  
post #107 of 127 Old 07-18-2012, 08:54 PM
Small Dicked Member!
 
Join Date: May 2006
Posts: 346

User is: fulloutblaze is offline
Re: project: overtime dime

i love this truck the bed is insane great work!

LowClassCustomz

DRAGGING YOU DOWN TO OUR LEVEL


1999 Sonoma - bagged on 18s with some body work
2002 Ford focus- the daily
fulloutblaze is offline  
post #108 of 127 Old 07-19-2012, 04:07 AM Thread Starter
Registered User
 
allkustoms's Avatar
 
Join Date: Mar 2010
Location: Langley B.C Canada
Age: 29
Posts: 88

User is: allkustoms is offline
Re: project: overtime dime

thanks guys i just got back from painting the box theres a few sags in the paint and a pretty bad run im kinda pissed about i guess i have alittle wet sanding and polishing to do anyway i got a few pics they look blurry but it's a haze of overspray






this is the run im pissed about



o and look what i picked up today they came into my po box on saterday



so tommorow i'm going to try and get one side bagged
allkustoms is offline  
post #109 of 127 Old 07-19-2012, 07:50 AM
Dems 22s
 
mattadams13's Avatar
 
Join Date: Jul 2004
Location: Lexington TN
Age: 29
Posts: 3,602

User is: mattadams13 is offline
Re: project: overtime dime

Beefy!!!!!

Matt Adams


Project thread: Laying on billet 22s http://www.s10forum.com/forum/f30/si...thread-486853/
mattadams13 is offline  
post #110 of 127 Old 07-20-2012, 12:49 AM Thread Starter
Registered User
 
allkustoms's Avatar
 
Join Date: Mar 2010
Location: Langley B.C Canada
Age: 29
Posts: 88

User is: allkustoms is offline
Re: project: overtime dime

got my control arms powder coated today he came and got them at 11:30 and dropped them off at 5:00 and i got some better pics of the bed now that there isnt any overspray in the air













i mixed alittle to much paint and ive been building this lowrider wagon for my wife's 2 year old cousin so i painted it to

allkustoms is offline  
post #111 of 127 Old 07-20-2012, 02:59 AM
Registered User
 
littledevil4802's Avatar
 
Join Date: Nov 2007
Location: Warren, MI
Age: 29
Posts: 2,456

User is: littledevil4802 is offline
Send a message via AIM to littledevil4802
Re: project: overtime dime

looks titts. cant wait to see it all back together

92 reg. cab-lowered 5/4-sold

95 std cab- bagged about to be bodied









www.airedup.com
littledevil4802 is offline  
post #112 of 127 Old 07-22-2012, 01:01 AM Thread Starter
Registered User
 
allkustoms's Avatar
 
Join Date: Mar 2010
Location: Langley B.C Canada
Age: 29
Posts: 88

User is: allkustoms is offline
Re: project: overtime dime

so i got the truck all together and went and put insurance on it i still need to put the windshield wipers on ,polish the box since i did alittle wet sanding it still needs shocks all around i just didnt have time before tommorow i need to cut the inner fenders a bit so it will lay its about a inch away












ride height

allkustoms is offline  
post #113 of 127 Old 07-22-2012, 03:07 AM
The Chop Shop
 
J Tizzle's Avatar
 
Join Date: Mar 2009
Location: Racine,Wi
Age: 36
Posts: 419

User is: J Tizzle is offline
Re: project: overtime dime

Looks good.The bed looks great!

2003 ZR-2 tukin' 24's
2000 S-10 Ext.Cab ZR-2
1979 El Camino 1984 El Camino
2001 Harley Sportster
1996 Suzuki Katana 600 1986 Kawasaki Klr 600 Enduro
J Tizzle is offline  
post #114 of 127 Old 07-22-2012, 07:32 AM
Registered User
 
2003Xtreme's Avatar
 
Join Date: May 2008
Location: Vandalia, IL
Age: 26
Posts: 1,760

User is: 2003Xtreme is offline
Re: project: overtime dime

Bed looks awesome man, but now you need to repaint the rest of the truck lol


99 Hugger Orange Z28
93 Suburban Lowered
91 S10 shortbed Lowered


Project Build Thread Links
http://www.s10forum.com/forum/f135/s...y-pics-483887/
http://www.s10forum.com/forum/f135/f...yard-d-483861/
http://www.s10forum.com/forum/f3/198...t-work-489962/

Quote:
Originally Posted by J_SIN View Post
I'd rather pump up my bags with a bicycle pump than use their products.
2003Xtreme is offline  
post #115 of 127 Old 07-22-2012, 10:01 AM
Registered Asshole
 
rstadelmaier's Avatar
 
Join Date: Jan 2012
Location: Pittsburgh
Posts: 1,059

User is: rstadelmaier is offline
Re: project: overtime dime

black chrome powdercoat? matches mine exactly



because i just can't be normal>>> http://www.s10forum.com/forum/f125/p...ckhalf-488914/
rstadelmaier is offline  
post #116 of 127 Old 07-22-2012, 10:54 AM Thread Starter
Registered User
 
allkustoms's Avatar
 
Join Date: Mar 2010
Location: Langley B.C Canada
Age: 29
Posts: 88

User is: allkustoms is offline
Re: project: overtime dime

thanks guys im about to go give it a quick wash then ill finish up the other little things i painted the cab useing a differant paint gun but the paint came out of the same can really theres alot of orange peel and overspray on the cab from painting about 6 trailers in the shop since it was painted so hopefully a wet sand and cut polish will make it look a bit closer to box if not ill wait until winter when i pull the engine to clean up under the hood and send it to paint in spring some time and the powdercoat is gunmetal gray anyway i need to go get it ready then head over to my friends shop for there annual bikini car wash and show n shine it should be good theres a 58 liter keg and the bbq is going all day
allkustoms is offline  
post #117 of 127 Old 09-03-2012, 04:04 PM Thread Starter
Registered User
 
allkustoms's Avatar
 
Join Date: Mar 2010
Location: Langley B.C Canada
Age: 29
Posts: 88

User is: allkustoms is offline
Re: project: overtime dime

so i havent really done much besides drive it it still needs the shocks installed i havent touched the tailgate i'm having prolems with my hands i went to the dr and found out i have carpal tunnel syndrome in both hands witch has put my truck on hold i might be finishing up the little stuff over the next few weeks then putting it up for sale as my wife is pregnant and the truck isnt family friendly so depending on how much i get i'll be getting a new project a 1928-31 ford tudor sedan or a early 50's chevy are the top 2 we will see what i find
allkustoms is offline  
post #118 of 127 Old 10-23-2012, 02:37 AM Thread Starter
Registered User
 
allkustoms's Avatar
 
Join Date: Mar 2010
Location: Langley B.C Canada
Age: 29
Posts: 88

User is: allkustoms is offline
Re: project: overtime dime

the truck is now listed on my local craigslist the last driveshaft blew up from rubbing on the floor when riding low so i got a smaller diamater one built i usually drive everywhere about a inch off the ground i did the triangle plate mod a couple of weeks ago so it fully lays now i have a new obx header waiting to be installed there's still a few things to finish up but it is drivable it could use a nicer paint job it looks fine from 15 feet tho i am going to start taking care of the little things this week pm me any questions ill be listing it in the classifieds on here in the next couple days
allkustoms is offline  
post #119 of 127 Old 10-23-2012, 07:37 AM
Dems 22s
 
mattadams13's Avatar
 
Join Date: Jul 2004
Location: Lexington TN
Age: 29
Posts: 3,602

User is: mattadams13 is offline
Re: project: overtime dime

Hate to see you sale it, but i understand with the baby on the way. You did a great job on this truck, i cant wait to see your next build thread.

Matt Adams


Project thread: Laying on billet 22s http://www.s10forum.com/forum/f30/si...thread-486853/
mattadams13 is offline  
post #120 of 127 Old 11-22-2012, 01:36 AM
Registered User
 
BigAl1120's Avatar
 
Join Date: Jan 2012
Location: clanton, alabama
Age: 25
Posts: 251

User is: BigAl1120 is offline
Re: project: overtime dime

anyway you can get some measurments up on that speaker box?
BigAl1120 is offline  
post #121 of 127 Old 12-02-2012, 05:29 PM
Registered User
 
84blaze's Avatar
 
Join Date: Dec 2008
Location: Edmonton, AB
Age: 25
Posts: 1,933

User is: 84blaze is offline
Re: project: overtime dime

Did you sell the truck? I noticed your ad on craigslist disappeared.
84blaze is offline  
post #122 of 127 Old 12-19-2012, 01:41 AM Thread Starter
Registered User
 
allkustoms's Avatar
 
Join Date: Mar 2010
Location: Langley B.C Canada
Age: 29
Posts: 88

User is: allkustoms is offline
Re: project: overtime dime

84blaze i sold the truck on december 2 i was actually dropping the truck off and picking up the new project about the time you posted asking if it sold
allkustoms is offline  
post #123 of 127 Old 12-19-2012, 02:16 AM Thread Starter
Registered User
 
allkustoms's Avatar
 
Join Date: Mar 2010
Location: Langley B.C Canada
Age: 29
Posts: 88

User is: allkustoms is offline
Re: project: overtime dime

ok so i sold the truck i don't think guy will be keeping it long tho he is 52 years old and about 6'3'' so its not really his style he was saying he's going to put a small block in it and something about spacers for the bags so it wont lay out anymore i have a feeling that if i drive past his house 2 years from now it will be exactly as i left it layed out in his driveway where his last project car sat untouched since 89

i am sad to see it go and if i have the chance to buy it back in the future i might but at this point in time i'm goin to start the next project i hope you guys like it i know it's not a s10 or even a chevy

it's a 1930 ford model a tudor sedan that was restored in the early 60's driven rarely into the early 70's the next owner drove it on the road once in 88 and parked it moving it around his property until he threw a gear out of the side of the transmission around 2010 and sold it to me on dec 2nd
allkustoms is offline  
post #124 of 127 Old 12-19-2012, 02:26 PM
Registered User
 
Join Date: Jul 2008
Age: 32
Posts: 296

User is: carl0st001 is offline
Re: project: overtime dime

project thread?
carl0st001 is offline  
post #125 of 127 Old 12-19-2012, 07:09 PM
ELTC
 
Gimp's Avatar
 
Join Date: May 2008
Location: CT
Age: 32
Posts: 8,391

User is: Gimp is offline
Re: project: overtime dime

Damn. Really liked your truck man. Im sure it was tough to let go of it.
Post some pics of your new ride if you dont mind. Sounds cool
Good luck on the new project !

Exceeding Limits Truck Club CT/MA Prez & member
2003 GMC Sierra 6/8
1989 Chevy S10 V8 5/6

Quote:
Originally Posted by pwtr02ss View Post
Thats what I hate about them....when a man was 16 he just wanted to plow a 26 year old. Man turns 26 wishes he was still in high school plowing 16 year olds
Gimp is offline  
post #126 of 127 Old 12-20-2012, 12:38 AM Thread Starter
Registered User
 
allkustoms's Avatar
 
Join Date: Mar 2010
Location: Langley B.C Canada
Age: 29
Posts: 88

User is: allkustoms is offline
Re: project: overtime dime

i made a thread on here hopefully i'll get to start cutting soon but first i'm going to get it drivable so i can sell off what i don't need

here's the link to the new thread http://www.s10forum.com/forum/f30/ch...odel-a-508689/
allkustoms is offline  
post #127 of 127 Old 02-28-2013, 07:15 PM
Registered User
 
84blaze's Avatar
 
Join Date: Dec 2008
Location: Edmonton, AB
Age: 25
Posts: 1,933

User is: 84blaze is offline
Re: project: overtime dime

If you don't mind me asking how much did you sell the truck for?

Thanks
84blaze is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the S-10 Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address.


Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome