[ProjecT] LoW RangE

dawgnutz · 08-04-2008, 01:07 PM

And Look at the Camber! Whoo!

83LOWrange · 08-04-2008, 03:58 PM

Quote: Originally Posted by TuckaBlaze

awesome, you scared me for a second lol...

haha o yea, trust me. i learned that lesson in my fast n furious phase.

so anymore on the frame? you ready for the cab yet? i think i am going to go ahead and try to do the fron (AGAIN!) yea i know. but when it goes to be body dropped i will keep the beams and just 2x3 under the cab

TuckaBlaze · 08-04-2008, 07:35 PM

Quote: Originally Posted by 83LOWrange

haha o yea, trust me. i learned that lesson in my fast n furious phase.

so anymore on the frame? you ready for the cab yet? i think i am going to go ahead and try to do the fron (AGAIN!) yea i know. but when it goes to be body dropped i will keep the beams and just 2x3 under the cab

The stock floor cab is easy enough you can do that yourself no prob. I think the beams will come apart if you remove it all together and set it on a railroad tie like we was talking about.

No more on info on my truck i am still waiting to get paid my first check, and i start another rotation on the 6th so i wont have time to do nothing but maybe order some stuff... after that ill have just about enough for my suspension and get rdy for the cab i hop...

83LOWrange · 08-05-2008, 12:20 AM

ahh ok ok.. the DL! lol

well idk if i wanna try stockflooring the cab myself yet... idk MAYBE! we shall see

i will have to do another notch though.

83LOWrange · 08-05-2008, 06:32 PM

ight well im going outside right now to weld and mud my bed today and tonight. i have all day, so im going to try and get alot done! thnx for the sheetmetal help tuck! ill post some pics for ya of my sheetmetal walking beads abilities now. hahah

its alot different than what im used to

well ill update here shortly!

83LOWrange · 08-05-2008, 07:55 PM

ok well i got the top down fairly close

now to start on this side

now i grinded down the side to a bevel kind of

tacked it all up

grinded it down to about where i want

a little bit of a curve

now all thats very rough, i think all this will be worth it in the end

83LOWrange · 08-05-2008, 10:18 PM

lol i cant lay down filler very smooth on this thing. this is a very awkward spot, but still

now its starting to look like something

and i sprayed on some primer because i dont want it to rust. i going to start on these long sides inside the bed where i cut and raised it all up.

rolleds10 · 08-06-2008, 12:46 AM

hey man i was reading up on ur thread and i see u want to do a dash swap there is this web site that does some pretty cool dash work www.friendlychopshop.com u should check them out for some ideas. keep up the good work looking good.

TrYiN2LaYaDiMe · 08-06-2008, 12:54 AM

Quote: Originally Posted by rolleds10

hey man i was reading up on ur thread and i see u want to do a dash swap there is this web site that does some pretty cool dash work www.friendlychopshop.com u should check them out for some ideas. keep up the good work looking good.

eric is way expensive he did a buddies of mine in RA and it cost him 5 grand for just dash,panels,paint and i think the seat covering on a regular cab truck. dont get me wrong eric is in the club and all but he is worth the money but is alot.

you can check out my myspace for a guy named Keef he is down in saldis (SP) la. he does great work and is close as hell to you give him a hollar if u need anything done and tell him steve and brenda sent you.

83LOWrange · 08-06-2008, 03:30 AM

Quote: Originally Posted by TrYiN2LaYaDiMe

eric is way expensive he did a buddies of mine in RA and it cost him 5 grand for just dash,panels,paint and i think the seat covering on a regular cab truck. dont get me wrong eric is in the club and all but he is worth the money but is alot.

you can check out my myspace for a guy named Keef he is down in saldis (SP) la. he does great work and is close as hell to you give him a hollar if u need anything done and tell him steve and brenda sent you.

yeah, keefs.. i know him, i have been talkie to paulie at westside innovations about doing my stock floored cab. i was going to talk to keef about it also, but im going to see what all me and paulie can do

and as of right now idk if im going to be able to get the dash yet. i hope so but we will see

83LOWrange · 08-06-2008, 03:33 AM

Quote: Originally Posted by rolleds10

hey man i was reading up on ur thread and i see u want to do a dash swap there is this web site that does some pretty cool dash work www.friendlychopshop.com u should check them out for some ideas. keep up the good work looking good.

and thanks for the link. i just went thru some of the pics and check this out
http://www.friendlychopshop.com/gall...?g2_itemId=399

of course, its the same dash i wanna use. dont that just BLOW

83LOWrange · 08-06-2008, 11:44 PM

ha . . damn

i guess people really dont like mud work

TrYiN2LaYaDiMe · 08-06-2008, 11:48 PM

Quote: Originally Posted by 83LOWrange

yeah, keefs.. i know him, i have been talkie to paulie at westside innovations about doing my stock floored cab. i was going to talk to keef about it also, but im going to see what all me and paulie can do

and as of right now idk if im going to be able to get the dash yet. i hope so but we will see

i dont know much about westside but i recommend keef 1000% he is a friend and part of RA.

83LOWrange · 08-07-2008, 02:58 AM

Quote: Originally Posted by TrYiN2LaYaDiMe

i dont know much about westside but i recommend keef 1000% he is a friend and part of RA.

o yea i know. that isabella project? OMFFFG! but paulie at Westside does good work, but its still in the air tho... we sahll see

you been gettin yours goin?

TrYiN2LaYaDiMe · 08-07-2008, 06:20 PM

Quote: Originally Posted by 83LOWrange

o yea i know. that isabella project? OMFFFG! but paulie at Westside does good work, but its still in the air tho... we sahll see

you been gettin yours goin?

ya isabella is hot with that paint. and mine is eh right now.

83LOWrange · 08-07-2008, 07:50 PM

Quote: Originally Posted by TrYiN2LaYaDiMe

ya isabella is hot with that paint. and mine is eh right now.

LMAO ahh come one man!

well the weather is so shtty right now that i cant work on mine today. but if i had a shop... cough cough

well i could work on it. but you know some people have one and dont wanna work on it. i mean hes not even TrYiN2 LMAO jk

TrYiN2LaYaDiMe · 08-07-2008, 08:01 PM

Quote: Originally Posted by 83LOWrange

LMAO ahh come one man!

well the weather is so shtty right now that i cant work on mine today. but if i had a shop... cough cough

well i could work on it. but you know some people have one and dont wanna work on it. i mean hes not even TrYiN2 LMAO jk

hahahaha funny smart ass.

83LOWrange · 08-07-2008, 11:03 PM

Quote: Originally Posted by TrYiN2LaYaDiMe

hahahaha funny smart ass.

im tryin2 get you motivated man! lol

well the weather is supposed to be better here so i hope to get alot done for dream cruz. and lake front tour is next month! so i gotta get the front down

83LOWrange · 08-08-2008, 05:06 PM

well its taking a while.

but its coming

TrYiN2LaYaDiMe · 08-08-2008, 05:54 PM

http://www.s10forum.com/forum/f93/st...ham-al-363623/

83LOWrange · 08-08-2008, 10:45 PM

just started the other side

still gotta do some grinding.

but ths side was easier. i think its comin along nicely considering this is the first time ive tried doing anything like this on my own. (not welding, just sheetmetal and mini trucks)

TuckaBlaze · 08-08-2008, 11:33 PM

Looks good, just make sure when u grind u stay on the weld. It sucks when u go threw the surrounding metal!

83LOWrange · 08-09-2008, 02:41 AM

Quote: Originally Posted by TuckaBlaze

Looks good, just make sure when u grind u stay on the weld. It sucks when u go threw the surrounding metal!

hahah thanx tuck. yea ive been going easy till i get the real hang of it. remember this is actually the first "sheetmetal to sheetmetal"

i did like 16ga to sheetmetal on the back. but i guess its ok. ill get better. you going to lake front man?

TuckaBlaze · 08-09-2008, 06:47 PM

Quote: Originally Posted by 83LOWrange

hahah thanx tuck. yea ive been going easy till i get the real hang of it. remember this is actually the first "sheetmetal to sheetmetal"

i did like 16ga to sheetmetal on the back. but i guess its ok. ill get better. you going to lake front man?

Yea i would hate for you to grind threw you have to make a patch panel to fix it...

I dunno depends on when it is, i gotta be at work when the military puts them soldiers out there... so far i am booked till the 18th...

83LOWrange · 08-09-2008, 07:10 PM

i know it doesnt look like much. bt thats alot of time! tack every so many inches, wait a while and do it over. its comin along
but god it looks HELLA ugly

2Low2Go · 08-09-2008, 07:43 PM

awesome job!

Outlawz24 · 08-09-2008, 10:38 PM

Looking great so far man!

krayzkajun · 08-09-2008, 10:48 PM

you goin to SIKNIC???

83LOWrange · 08-10-2008, 03:35 AM

Quote: Originally Posted by krayzkajun

you goin to SIKNIC???

ahh man idk. im going to dream cruz and then im goin to LFT! with the front done hopefully. i want to go to sicnik. its oct. 18th?

Skully · 08-10-2008, 04:13 AM

Trucks lookin good keep it up

83LOWrange · 08-10-2008, 04:47 AM

ok well i grinded it down.

ok now would it be ok to mud over this? or should i tack up the low spots?

08-04-2008, 01:07 PM	#351
dawgnutz The Werk Truck Age: 28 Join Date: Feb 2002 Posts: 2,846 Location: Huntington Beach, Ca. User is: OffLine	Re: [ProjecT] LoW RangE And Look at the Camber! Whoo!
	[Reply w/Quote]

08-04-2008, 03:58 PM	#352
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by TuckaBlaze awesome, you scared me for a second lol... haha o yea, trust me. i learned that lesson in my fast n furious phase. so anymore on the frame? you ready for the cab yet? i think i am going to go ahead and try to do the fron (AGAIN!) yea i know. but when it goes to be body dropped i will keep the beams and just 2x3 under the cab
	[Reply w/Quote]

08-04-2008, 07:35 PM	#353
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,268 Location: Leesville, LA User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by 83LOWrange haha o yea, trust me. i learned that lesson in my fast n furious phase. so anymore on the frame? you ready for the cab yet? i think i am going to go ahead and try to do the fron (AGAIN!) yea i know. but when it goes to be body dropped i will keep the beams and just 2x3 under the cab The stock floor cab is easy enough you can do that yourself no prob. I think the beams will come apart if you remove it all together and set it on a railroad tie like we was talking about. No more on info on my truck i am still waiting to get paid my first check, and i start another rotation on the 6th so i wont have time to do nothing but maybe order some stuff... after that ill have just about enough for my suspension and get rdy for the cab i hop... Last edited by TuckaBlaze : 08-04-2008 at 07:37 PM.
	[Reply w/Quote]

08-05-2008, 12:20 AM	#354
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE ahh ok ok.. the DL! lol well idk if i wanna try stockflooring the cab myself yet... idk MAYBE! we shall see i will have to do another notch though.
	[Reply w/Quote]

08-05-2008, 06:32 PM	#355
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE ight well im going outside right now to weld and mud my bed today and tonight. i have all day, so im going to try and get alot done! thnx for the sheetmetal help tuck! ill post some pics for ya of my sheetmetal walking beads abilities now. hahah its alot different than what im used to well ill update here shortly!
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

08-05-2008, 07:55 PM	#356
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE ok well i got the top down fairly close now to start on this side now i grinded down the side to a bevel kind of tacked it all up grinded it down to about where i want a little bit of a curve now all thats very rough, i think all this will be worth it in the end
	[Reply w/Quote]

08-05-2008, 10:18 PM	#357
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE lol i cant lay down filler very smooth on this thing. this is a very awkward spot, but still now its starting to look like something and i sprayed on some primer because i dont want it to rust. i going to start on these long sides inside the bed where i cut and raised it all up.
	[Reply w/Quote]

08-06-2008, 12:46 AM	#358
rolleds10 Registered User Join Date: Feb 2007 Posts: 19 Location: User is: OffLine	Re: [ProjecT] LoW RangE hey man i was reading up on ur thread and i see u want to do a dash swap there is this web site that does some pretty cool dash work www.friendlychopshop.com u should check them out for some ideas. keep up the good work looking good.
	[Reply w/Quote]

08-06-2008, 12:54 AM	#359
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,860 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by rolleds10 hey man i was reading up on ur thread and i see u want to do a dash swap there is this web site that does some pretty cool dash work www.friendlychopshop.com u should check them out for some ideas. keep up the good work looking good. eric is way expensive he did a buddies of mine in RA and it cost him 5 grand for just dash,panels,paint and i think the seat covering on a regular cab truck. dont get me wrong eric is in the club and all but he is worth the money but is alot. you can check out my myspace for a guy named Keef he is down in saldis (SP) la. he does great work and is close as hell to you give him a hollar if u need anything done and tell him steve and brenda sent you.
	[Reply w/Quote]

08-06-2008, 03:30 AM	#360
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by TrYiN2LaYaDiMe eric is way expensive he did a buddies of mine in RA and it cost him 5 grand for just dash,panels,paint and i think the seat covering on a regular cab truck. dont get me wrong eric is in the club and all but he is worth the money but is alot. you can check out my myspace for a guy named Keef he is down in saldis (SP) la. he does great work and is close as hell to you give him a hollar if u need anything done and tell him steve and brenda sent you. yeah, keefs.. i know him, i have been talkie to paulie at westside innovations about doing my stock floored cab. i was going to talk to keef about it also, but im going to see what all me and paulie can do and as of right now idk if im going to be able to get the dash yet. i hope so but we will see
	[Reply w/Quote]

08-06-2008, 03:33 AM	#361
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by rolleds10 hey man i was reading up on ur thread and i see u want to do a dash swap there is this web site that does some pretty cool dash work www.friendlychopshop.com u should check them out for some ideas. keep up the good work looking good. and thanks for the link. i just went thru some of the pics and check this out http://www.friendlychopshop.com/gall...?g2_itemId=399 of course, its the same dash i wanna use. dont that just BLOW
	[Reply w/Quote]

08-06-2008, 11:44 PM	#362
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE ha . . damn i guess people really dont like mud work
	[Reply w/Quote]

08-06-2008, 11:48 PM	#363
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,860 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by 83LOWrange yeah, keefs.. i know him, i have been talkie to paulie at westside innovations about doing my stock floored cab. i was going to talk to keef about it also, but im going to see what all me and paulie can do and as of right now idk if im going to be able to get the dash yet. i hope so but we will see i dont know much about westside but i recommend keef 1000% he is a friend and part of RA.
	[Reply w/Quote]

08-07-2008, 02:58 AM	#364
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by TrYiN2LaYaDiMe i dont know much about westside but i recommend keef 1000% he is a friend and part of RA. o yea i know. that isabella project? OMFFFG! but paulie at Westside does good work, but its still in the air tho... we sahll see you been gettin yours goin?
	[Reply w/Quote]

08-07-2008, 06:20 PM	#365
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,860 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by 83LOWrange o yea i know. that isabella project? OMFFFG! but paulie at Westside does good work, but its still in the air tho... we sahll see you been gettin yours goin? ya isabella is hot with that paint. and mine is eh right now.
	[Reply w/Quote]

08-07-2008, 07:50 PM	#366
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by TrYiN2LaYaDiMe ya isabella is hot with that paint. and mine is eh right now. LMAO ahh come one man! well the weather is so shtty right now that i cant work on mine today. but if i had a shop... cough cough well i could work on it. but you know some people have one and dont wanna work on it. i mean hes not even TrYiN2 LMAO jk
	[Reply w/Quote]

08-07-2008, 08:01 PM	#367
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,860 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by 83LOWrange LMAO ahh come one man! well the weather is so shtty right now that i cant work on mine today. but if i had a shop... cough cough well i could work on it. but you know some people have one and dont wanna work on it. i mean hes not even TrYiN2 LMAO jk hahahaha funny smart ass.
	[Reply w/Quote]

08-07-2008, 11:03 PM	#368
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by TrYiN2LaYaDiMe hahahaha funny smart ass. im tryin2 get you motivated man! lol well the weather is supposed to be better here so i hope to get alot done for dream cruz. and lake front tour is next month! so i gotta get the front down
	[Reply w/Quote]

08-08-2008, 05:06 PM	#369
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE well its taking a while. but its coming
	[Reply w/Quote]

08-08-2008, 05:54 PM	#370
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,860 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: [ProjecT] LoW RangE http://www.s10forum.com/forum/f93/st...ham-al-363623/
	[Reply w/Quote]

08-08-2008, 10:45 PM	#371
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE just started the other side still gotta do some grinding. but ths side was easier. i think its comin along nicely considering this is the first time ive tried doing anything like this on my own. (not welding, just sheetmetal and mini trucks)
	[Reply w/Quote]

08-08-2008, 11:33 PM	#372
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,268 Location: Leesville, LA User is: OffLine	Re: [ProjecT] LoW RangE Looks good, just make sure when u grind u stay on the weld. It sucks when u go threw the surrounding metal!
	[Reply w/Quote]

08-09-2008, 02:41 AM	#373
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by TuckaBlaze Looks good, just make sure when u grind u stay on the weld. It sucks when u go threw the surrounding metal! hahah thanx tuck. yea ive been going easy till i get the real hang of it. remember this is actually the first "sheetmetal to sheetmetal" i did like 16ga to sheetmetal on the back. but i guess its ok. ill get better. you going to lake front man?
	[Reply w/Quote]

08-09-2008, 06:47 PM	#374
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,268 Location: Leesville, LA User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by 83LOWrange hahah thanx tuck. yea ive been going easy till i get the real hang of it. remember this is actually the first "sheetmetal to sheetmetal" i did like 16ga to sheetmetal on the back. but i guess its ok. ill get better. you going to lake front man? Yea i would hate for you to grind threw you have to make a patch panel to fix it... I dunno depends on when it is, i gotta be at work when the military puts them soldiers out there... so far i am booked till the 18th...
	[Reply w/Quote]

08-09-2008, 07:10 PM	#375
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE i know it doesnt look like much. bt thats alot of time! tack every so many inches, wait a while and do it over. its comin along but god it looks HELLA ugly
	[Reply w/Quote]

08-09-2008, 07:43 PM	#376
2Low2Go Bad Hobbits go to mordor Age: 23 Join Date: Aug 2005 Posts: 318 Location: User is: OffLine	Re: [ProjecT] LoW RangE awesome job!
	[Reply w/Quote]

08-09-2008, 10:38 PM	#377
Outlawz24 Drifting Nomad Age: 25 Join Date: Apr 2006 Posts: 495 Location: Lloydminster Sask Canada User is: OffLine	Re: [ProjecT] LoW RangE Looking great so far man!
	[Reply w/Quote]

08-09-2008, 10:48 PM	#378
krayzkajun DriveWay Innovations Age: 24 Join Date: Jan 2006 Posts: 201 Location: WestWego, LA User is: OffLine	Re: [ProjecT] LoW RangE you goin to SIKNIC???
	[Reply w/Quote]

08-10-2008, 03:35 AM	#379
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE Quote: Originally Posted by krayzkajun you goin to SIKNIC??? ahh man idk. im going to dream cruz and then im goin to LFT! with the front done hopefully. i want to go to sicnik. its oct. 18th?
	[Reply w/Quote]

08-10-2008, 04:13 AM	#380
Skully Registered User Join Date: Jan 2008 Posts: 124 Location: Enoree SC User is: OffLine	Re: [ProjecT] LoW RangE Trucks lookin good keep it up
	[Reply w/Quote]

08-10-2008, 04:47 AM	#381
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 585 Location: Louisiana User is: OffLine	Re: [ProjecT] LoW RangE ok well i grinded it down. ok now would it be ok to mud over this? or should i tack up the low spots?
	[Reply w/Quote]