[Project] Living up to my username

GakiAkuma · 08-23-2007, 04:01 AM

I knwo its your thing but I just dont get whats the point of a butload of tvs in a vehicle. like tvs in the headrests when its only got 2 seats.

xtucking22s · 08-23-2007, 09:05 AM

Quote: Originally Posted by GakiAkuma

I knwo its your thing but I just dont get whats the point of a butload of tvs in a vehicle. like tvs in the headrests when its only got 2 seats.

ok...that conversation is in the past, lets try and concentrate on the subjext at hand now....MY BED DUMPS

Thanks for the compliments guys, im very happy with it

greencactus3 · 08-23-2007, 09:16 AM

i dunno if you covered this before, but are you gonna suicide your hood too?

xtucking22s · 08-23-2007, 09:27 AM

the thought had crossed my mind to do it. Its not in the scope of this project, but I would do it before I got a paint job. I have a friend who did his 03 s10, so I know he could help me. I dunno...kind of think the truck might be way too busy with suicide hood, lambo doors, dump bed, and a bed cover. The truck has always been nice and clean when all closed up, but whenever i open it up for acar show i allready feel its too busy with the lambo doors and just the bed cover. Its going to look like a transformer or some shit hahaha

greencactus3 · 08-23-2007, 09:49 AM

i unno. i was looking at the side profile shot in your sig and was just imagining the dump bed with the lambos... the front end will look pretty lame after that lol

xtucking22s · 08-23-2007, 11:43 AM

on a side note last night while moving jacks around and everything, i got th etruck to lay bed sides/roll pan hahaha. I was literally tucking centercap of the wheels in the back(oh ya i got the wheels on after those pics were taken). it looked SO crazy awesome. Maybe tonight ill move the jacks again to get the rear slammed and take a picture of tucking the 22s, it looked SICK

stevehh · 08-23-2007, 12:43 PM

Thats fucking awesome Adam good to see its going along.

And I feel ya about the transformer thing, hah...Could look a little busy, but it would be hot too.

I got the hinges if ya need em.

xtucking22s · 08-23-2007, 01:10 PM

time to renue my trucks registration...got my notice in the mail....i think its time to get custom plates

you can have up to 7 characters, so i think im going to do "TUKN22S".

and thanks steve, if i do the hood ill let ya know

stevehh · 08-23-2007, 01:34 PM

That would be a phat plate man

I've got the black DARE one from PA to match my truck.

So no personalized plate for me

lade-lo · 08-23-2007, 02:01 PM

Quote: Originally Posted by xtucking22s

time to renue my trucks registration...got my notice in the mail....i think its time to get custom plates you can have up to 7 characters, so i think im going to do "TUKN22S".

and thanks steve, if i do the hood ill let ya know

damn yall are lucky we can only put 6 characters

mine is just TUCKIN

GakiAkuma · 08-23-2007, 02:03 PM

gull wing the doors suicide the hood.

flnole78 · 08-23-2007, 02:24 PM

Have you tried lifting the bed while the wheels are on yet? Just wondring what kind of clearance you get. Also can you lift yours with it laid out? I know I can on my first gen but I don't have the xtreme kit either.

xtucking22s · 08-23-2007, 02:38 PM

Quote: Originally Posted by GakiAkuma

gull wing the doors suicide the hood.

I have lambos allready, see sig below

Quote: Originally Posted by flnole78

Have you tried lifting the bed while the wheels are on yet? Just wondring what kind of clearance you get. Also can you lift yours with it laid out? I know I can on my first gen but I don't have the xtreme kit either.

yup, tried every combination of heights of the truck and with the wheels on. everything clears. spent hours last night moving jacks around to get all different combinations and kept lifting the bed to make sure everything cleared under every circumstance. im golden!

lade-lo · 08-23-2007, 03:14 PM

how about side to side
just thought id throw that in there

xtucking22s · 08-23-2007, 03:17 PM

i didnt hit a crazy side but i did a little bit. basically th conclusion is the dump bed works haha. if there is one position of the suspension that limits the bed from lifting, then i plain and simply make sure i put the truck to a height where i can dump the bed first, then air out the truck. its not like im going to be driving with the bed dumped, sounds like im asking for shit to break doing that haha

greencactus3 · 08-23-2007, 03:21 PM

get your latch idea finalized?

xtucking22s · 08-23-2007, 03:24 PM

the latch was figured out the day i saw the red s10 at carlisle 3 weeks ago and i decided to do it. I ordered a bear claw latch and selenoid from SD, and the latch will mount infront of the gas tank crossmember, and the pin that goes into the latch will be mounted to one of the bed's crossmembers. The selenoid gets wired to the lift valve so when i dump the bed with the switch, the latch opens automatically. Now i just need to get the latch, Dave said it is coming from Oregon so its going to take like a week to get here. there was a mis understanding so the selenoid didnt get ordered when i ordered the rest of the stuff.

kovz34 · 08-23-2007, 03:38 PM

this is one of my favorite project threads. good work adam. lovin the dump bed

FCKNLOW · 08-23-2007, 04:40 PM

im so anxious to see it laid out......your beds taking a dump....

nice work

Xtreme24 · 08-23-2007, 04:51 PM

now we need video.

looks good though!

xtucking22s · 08-23-2007, 05:21 PM

Quote: Originally Posted by Xtreme24

now we need video.

looks good though!

all ull see is a video of me and another person struggling to lift the bed lol. (the bags to lift the dump bed arent hooked up yet, sorry

)

lowridinrebel · 08-23-2007, 05:33 PM

ADAM, THIS TRUCK ALREADY LOOKS AMAZING, I'M LOVING IT...

Good job on the dump bed...Can't wait to see it finished! And thats gonna be a sweet plate if you get it....Here we can't have custom plates

optikal · 08-23-2007, 06:20 PM

****in right bro looks badass. i see you cut the tubs under the bed out i thought about that later after i left the other night.

BeyondeXtReMe · 08-23-2007, 07:22 PM

Looks good, now you can fill that bitch with rocks and sand and pretend your a dump truck!

xtucking22s · 08-23-2007, 08:23 PM

Quote: Originally Posted by optikal

****in right bro looks badass. i see you cut the tubs under the bed out i thought about that later after i left the other night.

ya, nothing i couldnt handle, although it was pain in the ass to cut it out, but i managed. and i dont know if you read above but we have to retub a little bit of the bed, i had to cut out where the front of the wishbone link pokes through the bed

and if you thought those pics were badass....how about these....

(sorry for all the pics, i know 1 or 2 could do the job just fine but this shit is BEAUTIFUL!!!!!!! i couldnt pic my favorite so i posted them all!!!!

)

i didnt try it cuz i didnt have anyone to help lift it, but by the looks of it if i have the truck slammed like this, the tilt bed wont work, it will hit the tire in the front of it. no biggie. tilt the bed, then slam the truck, simple solution.

David12460 · 08-23-2007, 08:27 PM

Looks great man! I want to see videos of the tilt bed in action once its all finished up...

greencactus3 · 08-23-2007, 09:14 PM

damn looks good. and tuckin LOTS.
cant wait to see the latch. please even more pics than you have of the hinge please lol

snakenet · 08-23-2007, 09:49 PM

great pics man, its really coming to life now seeing it with the wheels on!! I know its only mock up, but still, SICK!!

wavrun2000 · 08-23-2007, 10:38 PM

Truck looks great keep the pics comming.

xtucking22s · 08-24-2007, 12:09 AM

thanks everyone! i love looking at the rim tucking in the back, i cant stop looking at the pics of it. and what real sucks is the bed has to come back off because nothing is 100% in the back, this definitiyl was just to check things out and mock up to make sure i didnt go to far with a problem. But i seem to be good, with no real issues.

Quote: Originally Posted by greencactus3

damn looks good. and tuckin LOTS.
cant wait to see the latch. please even more pics than you have of the hinge please lol

when the bed comes off ill get more pics for ya

optikal · 08-24-2007, 12:30 AM

sick adam i love it. i read about the wishbone mount coming up through the floor, its no problem i can make something for it not this weekend but the next i'll come down and take care of the firewall if you have the dash out and everything ready to go.

08-23-2007, 04:01 AM	#1001
GakiAkuma I need a job, No one hire Age: 25 Join Date: Mar 2006 Posts: 370 Location: User is: OffLine	Re: [Project] Living up to my username I knwo its your thing but I just dont get whats the point of a butload of tvs in a vehicle. like tvs in the headrests when its only got 2 seats.
	[Reply w/Quote]

08-23-2007, 09:05 AM	#1002
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Living up to my username Quote: Originally Posted by GakiAkuma I knwo its your thing but I just dont get whats the point of a butload of tvs in a vehicle. like tvs in the headrests when its only got 2 seats. ok...that conversation is in the past, lets try and concentrate on the subjext at hand now....MY BED DUMPS Thanks for the compliments guys, im very happy with it
	[Reply w/Quote]

08-23-2007, 09:16 AM	#1003
greencactus3 bellcranks no more Age: 21 Join Date: Nov 2005 Posts: 23,004 Location: ann arbor, mi User is: OffLine	Re: [Project] Living up to my username i dunno if you covered this before, but are you gonna suicide your hood too?
	[Reply w/Quote]

08-23-2007, 09:27 AM	#1004
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Living up to my username the thought had crossed my mind to do it. Its not in the scope of this project, but I would do it before I got a paint job. I have a friend who did his 03 s10, so I know he could help me. I dunno...kind of think the truck might be way too busy with suicide hood, lambo doors, dump bed, and a bed cover. The truck has always been nice and clean when all closed up, but whenever i open it up for acar show i allready feel its too busy with the lambo doors and just the bed cover. Its going to look like a transformer or some shit hahaha
	[Reply w/Quote]

08-23-2007, 09:49 AM	#1005
greencactus3 bellcranks no more Age: 21 Join Date: Nov 2005 Posts: 23,004 Location: ann arbor, mi User is: OffLine	Re: [Project] Living up to my username i unno. i was looking at the side profile shot in your sig and was just imagining the dump bed with the lambos... the front end will look pretty lame after that lol
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

08-23-2007, 11:43 AM	#1006
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Living up to my username on a side note last night while moving jacks around and everything, i got th etruck to lay bed sides/roll pan hahaha. I was literally tucking centercap of the wheels in the back(oh ya i got the wheels on after those pics were taken). it looked SO crazy awesome. Maybe tonight ill move the jacks again to get the rear slammed and take a picture of tucking the 22s, it looked SICK
	[Reply w/Quote]

08-23-2007, 12:43 PM	#1007
stevehh ^ Im With Stupid ^ Age: 26 Join Date: May 2006 Posts: 6,767 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: [Project] Living up to my username Thats fucking awesome Adam good to see its going along. And I feel ya about the transformer thing, hah...Could look a little busy, but it would be hot too. I got the hinges if ya need em.
	[Reply w/Quote]

08-23-2007, 01:10 PM	#1008
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Living up to my username time to renue my trucks registration...got my notice in the mail....i think its time to get custom plates you can have up to 7 characters, so i think im going to do "TUKN22S". and thanks steve, if i do the hood ill let ya know
	[Reply w/Quote]

08-23-2007, 01:34 PM	#1009
stevehh ^ Im With Stupid ^ Age: 26 Join Date: May 2006 Posts: 6,767 Location: Levittown, PA-☆-NE Philly-☆-Trenton, NJ-☆Tha 19057 Bitches☆ User is: OffLine	Re: [Project] Living up to my username That would be a phat plate man I've got the black DARE one from PA to match my truck. So no personalized plate for me
	[Reply w/Quote]

08-23-2007, 02:01 PM	#1010
lade-lo TUCKIN Age: 23 Join Date: Oct 2003 Posts: 860 Location: TX User is: OffLine	Re: [Project] Living up to my username Quote: Originally Posted by xtucking22s time to renue my trucks registration...got my notice in the mail....i think its time to get custom plates you can have up to 7 characters, so i think im going to do "TUKN22S". and thanks steve, if i do the hood ill let ya know damn yall are lucky we can only put 6 characters mine is just TUCKIN
	[Reply w/Quote]

08-23-2007, 02:03 PM	#1011
GakiAkuma I need a job, No one hire Age: 25 Join Date: Mar 2006 Posts: 370 Location: User is: OffLine	Re: [Project] Living up to my username gull wing the doors suicide the hood.
	[Reply w/Quote]

08-23-2007, 02:24 PM	#1012
flnole78 Laying rear lift bars Age: 30 Join Date: Mar 2004 Posts: 2,352 Location: Tugonmypudah, Fl User is: OffLine	Re: [Project] Living up to my username Have you tried lifting the bed while the wheels are on yet? Just wondring what kind of clearance you get. Also can you lift yours with it laid out? I know I can on my first gen but I don't have the xtreme kit either.
	[Reply w/Quote]

08-23-2007, 02:38 PM	#1013
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Living up to my username Quote: Originally Posted by GakiAkuma gull wing the doors suicide the hood. I have lambos allready, see sig below Quote: Originally Posted by flnole78 Have you tried lifting the bed while the wheels are on yet? Just wondring what kind of clearance you get. Also can you lift yours with it laid out? I know I can on my first gen but I don't have the xtreme kit either. yup, tried every combination of heights of the truck and with the wheels on. everything clears. spent hours last night moving jacks around to get all different combinations and kept lifting the bed to make sure everything cleared under every circumstance. im golden! Last edited by xtucking22s : 08-23-2007 at 02:39 PM.
	[Reply w/Quote]

08-23-2007, 03:14 PM	#1014
lade-lo TUCKIN Age: 23 Join Date: Oct 2003 Posts: 860 Location: TX User is: OffLine	Re: [Project] Living up to my username how about side to side just thought id throw that in there
	[Reply w/Quote]

08-23-2007, 03:17 PM	#1015
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Living up to my username i didnt hit a crazy side but i did a little bit. basically th conclusion is the dump bed works haha. if there is one position of the suspension that limits the bed from lifting, then i plain and simply make sure i put the truck to a height where i can dump the bed first, then air out the truck. its not like im going to be driving with the bed dumped, sounds like im asking for shit to break doing that haha
	[Reply w/Quote]

08-23-2007, 03:21 PM	#1016
greencactus3 bellcranks no more Age: 21 Join Date: Nov 2005 Posts: 23,004 Location: ann arbor, mi User is: OffLine	Re: [Project] Living up to my username get your latch idea finalized?
	[Reply w/Quote]

08-23-2007, 03:24 PM	#1017
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Living up to my username the latch was figured out the day i saw the red s10 at carlisle 3 weeks ago and i decided to do it. I ordered a bear claw latch and selenoid from SD, and the latch will mount infront of the gas tank crossmember, and the pin that goes into the latch will be mounted to one of the bed's crossmembers. The selenoid gets wired to the lift valve so when i dump the bed with the switch, the latch opens automatically. Now i just need to get the latch, Dave said it is coming from Oregon so its going to take like a week to get here. there was a mis understanding so the selenoid didnt get ordered when i ordered the rest of the stuff. Last edited by xtucking22s : 08-23-2007 at 03:25 PM.
	[Reply w/Quote]

08-23-2007, 03:38 PM	#1018
kovz34 I needs paint! Age: 23 Join Date: May 2006 Posts: 8,189 Location: Pittsburgh, PA User is: OffLine	Re: [Project] Living up to my username this is one of my favorite project threads. good work adam. lovin the dump bed
	[Reply w/Quote]

08-23-2007, 04:40 PM	#1019
FCKNLOW snow camo!! Age: 20 Join Date: Mar 2005 Posts: 9,246 Location: Mechanicsburg, Pa User is: OffLine	Re: [Project] Living up to my username im so anxious to see it laid out......your beds taking a dump.... nice work
	[Reply w/Quote]

08-23-2007, 04:51 PM	#1020
Xtreme24 DeXtreme on 20/22's Age: 22 Join Date: May 2003 Posts: 3,537 Location: DFW, Texas User is: OffLine	Re: [Project] Living up to my username now we need video. looks good though!
	[Reply w/Quote]

08-23-2007, 05:21 PM	#1021
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Living up to my username Quote: Originally Posted by Xtreme24 now we need video. looks good though! all ull see is a video of me and another person struggling to lift the bed lol. (the bags to lift the dump bed arent hooked up yet, sorry )
	[Reply w/Quote]

08-23-2007, 05:33 PM	#1022
lowridinrebel Livin Life Low! Age: 25 Join Date: Apr 2005 Posts: 528 Location: Montreal Quebec, Canada User is: OffLine	Re: [Project] Living up to my username ADAM, THIS TRUCK ALREADY LOOKS AMAZING, I'M LOVING IT... Good job on the dump bed...Can't wait to see it finished! And thats gonna be a sweet plate if you get it....Here we can't have custom plates
	[Reply w/Quote]

08-23-2007, 06:20 PM	#1023
optikal Registered User Age: 23 Join Date: Jul 2004 Posts: 318 Location: North East, Maryland User is: OffLine	Re: [Project] Living up to my username ****in right bro looks badass. i see you cut the tubs under the bed out i thought about that later after i left the other night.
	[Reply w/Quote]

08-23-2007, 07:22 PM	#1024
BeyondeXtReMe Registered User Age: 22 Join Date: Mar 2005 Posts: 2,415 Location: Halifax, NS, Canada User is: OffLine	Re: [Project] Living up to my username Looks good, now you can fill that bitch with rocks and sand and pretend your a dump truck!
	[Reply w/Quote]

08-23-2007, 08:23 PM	#1025
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Living up to my username Quote: Originally Posted by optikal ****in right bro looks badass. i see you cut the tubs under the bed out i thought about that later after i left the other night. ya, nothing i couldnt handle, although it was pain in the ass to cut it out, but i managed. and i dont know if you read above but we have to retub a little bit of the bed, i had to cut out where the front of the wishbone link pokes through the bed and if you thought those pics were badass....how about these.... (sorry for all the pics, i know 1 or 2 could do the job just fine but this shit is BEAUTIFUL!!!!!!! i couldnt pic my favorite so i posted them all!!!! ) i didnt try it cuz i didnt have anyone to help lift it, but by the looks of it if i have the truck slammed like this, the tilt bed wont work, it will hit the tire in the front of it. no biggie. tilt the bed, then slam the truck, simple solution.
	[Reply w/Quote]

08-23-2007, 08:27 PM	#1026
David12460 AKA DavidAndSomeNumbers Age: 21 Join Date: Sep 2006 Posts: 2,841 Location: Minnesota User is: OffLine	Re: [Project] Living up to my username Looks great man! I want to see videos of the tilt bed in action once its all finished up...
	[Reply w/Quote]

08-23-2007, 09:14 PM	#1027
greencactus3 bellcranks no more Age: 21 Join Date: Nov 2005 Posts: 23,004 Location: ann arbor, mi User is: OffLine	Re: [Project] Living up to my username damn looks good. and tuckin LOTS. cant wait to see the latch. please even more pics than you have of the hinge please lol
	[Reply w/Quote]

08-23-2007, 09:49 PM	#1028
snakenet Now bodydroped on 20s!! Age: 20 Join Date: Jul 2006 Posts: 779 Location: West Sacramento User is: OffLine	Re: [Project] Living up to my username great pics man, its really coming to life now seeing it with the wheels on!! I know its only mock up, but still, SICK!!
	[Reply w/Quote]

08-23-2007, 10:38 PM	#1029
wavrun2000 Registered User Age: 19 Join Date: Apr 2006 Posts: 809 Location: Naples, Fl. User is: OffLine	Re: [Project] Living up to my username Truck looks great keep the pics comming.
	[Reply w/Quote]

08-24-2007, 12:09 AM	#1030
xtucking22s I want sonoma grill! Age: 23 Join Date: Nov 2005 Posts: 7,679 Location: Phoenix, MD User is: OffLine	Re: [Project] Living up to my username thanks everyone! i love looking at the rim tucking in the back, i cant stop looking at the pics of it. and what real sucks is the bed has to come back off because nothing is 100% in the back, this definitiyl was just to check things out and mock up to make sure i didnt go to far with a problem. But i seem to be good, with no real issues. Quote: Originally Posted by greencactus3 damn looks good. and tuckin LOTS. cant wait to see the latch. please even more pics than you have of the hinge please lol when the bed comes off ill get more pics for ya
	[Reply w/Quote]

08-24-2007, 12:30 AM	#1031
optikal Registered User Age: 23 Join Date: Jul 2004 Posts: 318 Location: North East, Maryland User is: OffLine	Re: [Project] Living up to my username sick adam i love it. i read about the wishbone mount coming up through the floor, its no problem i can make something for it not this weekend but the next i'll come down and take care of the firewall if you have the dash out and everything ready to go.
	[Reply w/Quote]

08-24-2007, 08:59 AM	#1032
xtucking22s I want sonoma grill!