project:Ladyluck

xxannihilationx · 09-29-2009, 11:46 AM

one more with the new batteries,tie downed, and less wires haha

Tuckin15's · 09-29-2009, 11:54 AM

I really like this truck i woiuld love to see more progress.

xxannihilationx · 10-01-2009, 08:57 AM

working on the speaker covers. I always have liked the look of being able to see the speaker

and the back wall of the extended cab

and heres more pics of the truck from the other day

G4Ls10 · 10-01-2009, 09:20 AM

are your lower control arms dehumped?? are your tie rods hittin the frame? did you take out the inner fender wells and cut out the supports in the fenders??? lol thats what u need to do to get it laid out

xxannihilationx · 10-01-2009, 09:22 AM

my lowers arms are fully plated. my inners are out. right now its laying on the inner skin of the fenders and the blower box and the tie rods hahah. I need some cash though to delete the abs, thats why I havent did anything else.

I'd love to make it lay out fully just don't have any cash since I do lawn service. All money has been going to bills, gas and cigarettes haha. I just have been working on the stuff that doesnt cost me money

jeffs99dime · 10-01-2009, 09:39 AM

that's a nice truck. you should de-badge it imo.

G4Ls10 · 10-01-2009, 09:45 AM

stop smoking man aha that extra money can go to your truck. why do you need to delete the abs??? and with the fenders just cut out the fender supports and the tie rods notch your frame or get the notchless tie rods but they are expensive hah. and with the heater ive seen guys fab up different blower boxes and stuff so that the tire wont hit any of the heater stuff.

xxannihilationx · 10-01-2009, 10:05 AM

are you positive I dont have to delete abs with my 20's? If not I will tear the front apart right now haha. and yes I need to def. stop smoking its way too expensive now

I don't know man im only like an inch away from it and I think I need to go at least 2 1/2 more inches

xxannihilationx · 10-01-2009, 10:06 AM

Quote: Originally Posted by jeffs99dime

that's a nice truck. you should de-badge it imo.

def. going too. handles are getting shaved, antenna, third break light, and gas filler

xxannihilationx · 10-10-2009, 07:46 PM

well nothing good has been happening lately once again. tranny finally went out so i fixed the bent to hell carrier bearing crossmember so the shop wouldnt say anything about it.
fvck man hole covers

fvck sawzalls also

new crossmember made going to weld in tom.

last of all, fvck bad tires

nobody laugh if you see me at slamfest rocking 15s. im going

flnole78 · 10-12-2009, 08:57 AM

I wouldn't just weld in that xmember. Make some plated on for the end of it and get it to bolt in. You never know when you'll need to remove it for something.

xxannihilationx · 10-19-2009, 10:37 AM

I guess you can call this an update haha. heading to the shop for a new trans with a shift kit and corvette servo! Should be done tomorrow hopefully

xxannihilationx · 10-22-2009, 01:56 PM

good news everyone! my ecu is gone.... amazing huh? just how everything likes to go bad at once?

i have a question...now that i have a shift kit and corvette servo, I'm thinking about calling waitformeperformance and getting a programed one. im mainly looking for a small bit of power and maybe some extra gas mileage...whats everyone's opinions on it? here's the only mods i have on the drive train:

cold air intake, gutted cat, corvette servo, b&m mild shift kit, and 3:73 rear gears...OPINIONS????

LIVINLOW08 · 10-22-2009, 03:18 PM

That all sounds awesome.!!!If you already got it tore down,,I would go ahead and do it......And exactly what all mods went into your console/shifter...What year was the blazer if thats what it came out of...

xxannihilationx · 10-24-2009, 02:34 AM

Quote: Originally Posted by LIVINLOW08

That all sounds awesome.!!!If you already got it tore down,,I would go ahead and do it......And exactly what all mods went into your console/shifter...What year was the blazer if thats what it came out of...

th floor shifter is stock. it was an option in 97

BGGD_GMC · 10-24-2009, 04:38 AM

are those stock spindles?

unclejames1 · 10-25-2009, 01:24 AM

good work so far!

xxannihilationx · 10-28-2009, 12:24 AM

Quote: Originally Posted by BGGD_GMC

are those stock spindles?

na they are drops

xxannihilationx · 01-09-2010, 05:51 PM

progress over the last week... finished welding the bed...now just got to grind it

also, made a battery cover

the tailgate just looked wayyy too ugly...

first coat of mud on the gate and it came out pretty straight

98 + bumper and valence its not lined up correctly i know...its just mocked up...trying to fit my stock fog lights in there.

that's all for now. Comments are welcome. you guys are what actually make me want to work on this truck.

xxannihilationx · 01-09-2010, 06:01 PM

oh and here's some pics when i had the bed off a long time ago to cleanup the wiring. shows you the setup i have though..

95_Stepside · 01-09-2010, 11:51 PM

truck is looking good! also stepside ftw!

xxannihilationx · 01-13-2010, 12:56 AM

wooo hoo. just got off the phone with my bitch of an ex-girlfriend(had to throw bitch in) and I'm getting my JL W3's out of her car hopefully next week. Finally a little bass back in the truck!

Baggd1026 · 01-13-2010, 08:37 AM

how do you have your gas tank held down an or is it jus chilln there?

Slappy McNasty · 01-13-2010, 09:39 AM

Quote: Originally Posted by Baggd1026

how do you have your gas tank held down an or is it jus chilln there?

there are 2 straps are holdin it in

CatDaddy52 · 01-13-2010, 11:42 AM

Any issues with the soft copper hard-lines?? Fatigue cracks, leaks, etc??

Tuckin15's · 01-13-2010, 12:47 PM

Quote: Originally Posted by CatDaddy52

Any issues with the soft copper hard-lines?? Fatigue cracks, leaks, etc??

I would also like to know how they are working out for you?

xxannihilationx · 01-14-2010, 03:35 AM

Quote: Originally Posted by Oldskool94

I would also like to know how they are working out for you?

you know when i told everyone i was doing copper lines, they told me i was crazy and i was going to have cracking problems and leaks at the ends......its been like over a year now and not one single leak or crack. the key to doing the copper is you have to have a good flare. Very glad i did them now because as far as my air goes...its bulletproof. I've hit my share of pot holes and went down bumpy ass dirt roads many of times and no cracking..

09-29-2009, 11:46 AM	#51
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck one more with the new batteries,tie downed, and less wires haha
	[Reply w/Quote]

09-29-2009, 11:54 AM	#52
Tuckin15's Registered User Age: 18 Join Date: Aug 2008 Posts: 3,561 Location: User is: OffLine	Re: project:Ladyluck I really like this truck i woiuld love to see more progress.
	[Reply w/Quote]

10-01-2009, 08:57 AM	#53
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck working on the speaker covers. I always have liked the look of being able to see the speaker and the back wall of the extended cab and heres more pics of the truck from the other day
	[Reply w/Quote]

10-01-2009, 09:20 AM	#54
G4Ls10 Registered User Join Date: Apr 2009 Posts: 502 Location: User is: OffLine	Re: project:Ladyluck are your lower control arms dehumped?? are your tie rods hittin the frame? did you take out the inner fender wells and cut out the supports in the fenders??? lol thats what u need to do to get it laid out
	[Reply w/Quote]

10-01-2009, 09:22 AM	#55
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck my lowers arms are fully plated. my inners are out. right now its laying on the inner skin of the fenders and the blower box and the tie rods hahah. I need some cash though to delete the abs, thats why I havent did anything else. I'd love to make it lay out fully just don't have any cash since I do lawn service. All money has been going to bills, gas and cigarettes haha. I just have been working on the stuff that doesnt cost me money Last edited by xxannihilationx : 10-01-2009 at 09:25 AM.
	[Reply w/Quote]

10-01-2009, 09:39 AM	#56
jeffs99dime NOBODY FUX WIT DA JESUS! Age: 31 Join Date: Feb 2006 Posts: 353 Location: NJ User is: OffLine	Re: project:Ladyluck that's a nice truck. you should de-badge it imo.
	[Reply w/Quote]

10-01-2009, 09:45 AM	#57
G4Ls10 Registered User Join Date: Apr 2009 Posts: 502 Location: User is: OffLine	Re: project:Ladyluck stop smoking man aha that extra money can go to your truck. why do you need to delete the abs??? and with the fenders just cut out the fender supports and the tie rods notch your frame or get the notchless tie rods but they are expensive hah. and with the heater ive seen guys fab up different blower boxes and stuff so that the tire wont hit any of the heater stuff.
	[Reply w/Quote]

10-01-2009, 10:05 AM	#58
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck are you positive I dont have to delete abs with my 20's? If not I will tear the front apart right now haha. and yes I need to def. stop smoking its way too expensive now I don't know man im only like an inch away from it and I think I need to go at least 2 1/2 more inches Last edited by xxannihilationx : 10-01-2009 at 10:11 AM.
	[Reply w/Quote]

10-01-2009, 10:06 AM	#59
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck Quote: Originally Posted by jeffs99dime that's a nice truck. you should de-badge it imo. def. going too. handles are getting shaved, antenna, third break light, and gas filler
	[Reply w/Quote]

10-10-2009, 07:46 PM	#60
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck well nothing good has been happening lately once again. tranny finally went out so i fixed the bent to hell carrier bearing crossmember so the shop wouldnt say anything about it. fvck man hole covers fvck sawzalls also new crossmember made going to weld in tom. last of all, fvck bad tires nobody laugh if you see me at slamfest rocking 15s. im going
	[Reply w/Quote]

10-12-2009, 08:57 AM	#61
flnole78 Burnt out Age: 31 Join Date: Mar 2004 Posts: 2,895 Location: Tallahassee, Fl User is: OffLine	Re: project:Ladyluck I wouldn't just weld in that xmember. Make some plated on for the end of it and get it to bolt in. You never know when you'll need to remove it for something.
	[Reply w/Quote]

10-19-2009, 10:37 AM	#62
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck I guess you can call this an update haha. heading to the shop for a new trans with a shift kit and corvette servo! Should be done tomorrow hopefully
	[Reply w/Quote]

10-22-2009, 01:56 PM	#63
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck good news everyone! my ecu is gone.... amazing huh? just how everything likes to go bad at once? i have a question...now that i have a shift kit and corvette servo, I'm thinking about calling waitformeperformance and getting a programed one. im mainly looking for a small bit of power and maybe some extra gas mileage...whats everyone's opinions on it? here's the only mods i have on the drive train: cold air intake, gutted cat, corvette servo, b&m mild shift kit, and 3:73 rear gears...OPINIONS????
	[Reply w/Quote]

10-22-2009, 03:18 PM	#64
LIVINLOW08 Registered User Age: 22 Join Date: Jul 2008 Posts: 17 Location: User is: OffLine	Re: project:Ladyluck That all sounds awesome.!!!If you already got it tore down,,I would go ahead and do it......And exactly what all mods went into your console/shifter...What year was the blazer if thats what it came out of...
	[Reply w/Quote]

10-24-2009, 02:34 AM	#65
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck Quote: Originally Posted by LIVINLOW08 That all sounds awesome.!!!If you already got it tore down,,I would go ahead and do it......And exactly what all mods went into your console/shifter...What year was the blazer if thats what it came out of... th floor shifter is stock. it was an option in 97
	[Reply w/Quote]

10-24-2009, 04:38 AM	#66
BGGD_GMC Registered User Age: 19 Join Date: Mar 2009 Posts: 218 Location: FRESNO User is: OffLine	Re: project:Ladyluck are those stock spindles?
	[Reply w/Quote]

10-25-2009, 01:24 AM	#67
unclejames1 just another dime!!!!! Age: 24 Join Date: May 2007 Posts: 619 Location: Warsaw, Indiana User is: OffLine	Re: project:Ladyluck good work so far!
	[Reply w/Quote]

10-28-2009, 12:24 AM	#68
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck Quote: Originally Posted by BGGD_GMC are those stock spindles? na they are drops
	[Reply w/Quote]

01-09-2010, 05:51 PM	#69
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck progress over the last week... finished welding the bed...now just got to grind it also, made a battery cover the tailgate just looked wayyy too ugly... first coat of mud on the gate and it came out pretty straight 98 + bumper and valence its not lined up correctly i know...its just mocked up...trying to fit my stock fog lights in there. that's all for now. Comments are welcome. you guys are what actually make me want to work on this truck.
	[Reply w/Quote]

01-09-2010, 06:01 PM	#70
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck oh and here's some pics when i had the bed off a long time ago to cleanup the wiring. shows you the setup i have though..
	[Reply w/Quote]

01-09-2010, 11:51 PM	#71
95_Stepside Mom & Dad Sponsors Join Date: Jan 2010 Posts: 326 Location: User is: OffLine	Re: project:Ladyluck truck is looking good! also stepside ftw!
	[Reply w/Quote]

01-13-2010, 12:56 AM	#72
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck wooo hoo. just got off the phone with my bitch of an ex-girlfriend(had to throw bitch in) and I'm getting my JL W3's out of her car hopefully next week. Finally a little bass back in the truck!
	[Reply w/Quote]

01-13-2010, 08:37 AM	#73
Baggd1026 Registered User Age: 22 Join Date: Sep 2008 Posts: 73 Location: Panama City User is: OffLine	Re: project:Ladyluck how do you have your gas tank held down an or is it jus chilln there?
	[Reply w/Quote]

01-13-2010, 09:39 AM	#74
Slappy McNasty Brava-dime 20' 7" long Join Date: Aug 2005 Posts: 3,378 Location: CENCAL User is: Online*	Re: project:Ladyluck Quote: Originally Posted by Baggd1026 how do you have your gas tank held down an or is it jus chilln there? there are 2 straps are holdin it in
	[Reply w/Quote]

01-13-2010, 11:42 AM	#75
CatDaddy52 Registered User Join Date: Nov 2008 Posts: 1,103 Location: Rochester Hizzle, MI User is: OffLine	Re: project:Ladyluck Any issues with the soft copper hard-lines?? Fatigue cracks, leaks, etc??
	[Reply w/Quote]

01-13-2010, 12:47 PM	#76
Tuckin15's Registered User Age: 18 Join Date: Aug 2008 Posts: 3,561 Location: User is: OffLine	Re: project:Ladyluck Quote: Originally Posted by CatDaddy52 Any issues with the soft copper hard-lines?? Fatigue cracks, leaks, etc?? I would also like to know how they are working out for you?
	[Reply w/Quote]

01-14-2010, 03:35 AM	#77
xxannihilationx Stepsides are cool Join Date: Sep 2007 Posts: 1,139 Location: Jax,FL User is: OffLine	Re: project:Ladyluck Quote: Originally Posted by Oldskool94 I would also like to know how they are working out for you? you know when i told everyone i was doing copper lines, they told me i was crazy and i was going to have cracking problems and leaks at the ends......its been like over a year now and not one single leak or crack. the key to doing the copper is you have to have a good flare. Very glad i did them now because as far as my air goes...its bulletproof. I've hit my share of pot holes and went down bumpy ass dirt roads many of times and no cracking..
	[Reply w/Quote]