(Project) "Finders Keepers" 5.7 Vortec, SFBD

juiced dimebag · 01-10-2008, 08:54 PM

ya cuz when i traditional bodydropped mine i moved the cab back 3/4 but i didnt scoot my bed back too i just left it so my bed gap wouuld close im gald i took the time to scoot it back because it looks so good with the front wheels centered and a smaller bed gap

dawgnutz · 01-11-2008, 12:00 PM

Werd....................when youmoved the cab mounts back, it wasn't too difficult was it? Since the mounts are round you don't really have to keep the pad at the angle it is in the front right?

TuckaBlaze · 01-11-2008, 08:15 PM

Quote: Originally Posted by dawgnutz

Werd....................when youmoved the cab mounts back, it wasn't too difficult was it? Since the mounts are round you don't really have to keep the pad at the angle it is in the front right?

Dunno havent done it yet.

Ive seen a relocated front body mount, but im thinkin i can move the rear on on the frame back 3/4, and the front one on the cab forward 3/4... make since?

dawgnutz · 01-11-2008, 08:16 PM

Yeah I see what you mean. I was asking juisced dimebag, sorry to whore. lol!

TuckaBlaze · 01-12-2008, 12:38 AM

Quote: Originally Posted by dawgnutz

Yeah I see what you mean. I was asking juisced dimebag, sorry to whore. lol!

O well shit.

TuckaBlaze · 01-13-2008, 10:31 PM

Engines together.

One head

2 heads

Lifter

Lifter install

The plate that keeps the roller lifters strait.

Rods and some rockers.

Plate that holds the plates that hold the rockers strait.

It looks like an ENGINE!

Sorry I could not find my good camra. It was cell phone pics, or no pics.

***2dxtreme*** · 01-13-2008, 10:36 PM

looking good daniel looking good

juiced dimebag · 01-14-2008, 12:22 AM

Quote: Originally Posted by dawgnutz

Yeah I see what you mean. I was asking juisced dimebag, sorry to whore. lol!

well since it was a traditional when i got the floor and fire wall cut i just scooted the body back and left the floor where it was...but the only problem that i ran into was i had a difficult time with radiator clearence between the dropped frame horns and steering box because i scooted the body closer to all of that

dawgnutz · 01-14-2008, 11:05 AM

Quote:

well since it was a traditional when i got the floor and fire wall cut i just scooted the body back and left the floor where it was...but the only problem that i ran into was i had a difficult time with radiator clearence between the dropped frame horns and steering box because i scooted the body closer to all of that

Ahh Fair enough! did you have to bend the firewall and rear cab wall back at an angle very far? did it look ok, or was it pretty obvious. 3/4" seems like alot.

Quote:

Engines together.

One head

2 heads

Lifter

Lifter install

The plate that keeps the roller lifters strait.

Rods and some rockers.

Plate that holds the plates that hold the rockers strait.

It looks like an ENGINE!

Sorry I could not find my good camra. It was cell phone pics, or no pics.

Hey Tucka!

Paint that bish before you drop it back in the truck!! LOL!

Looks great man! Have you been watching the other 5.7 vortec thread latley?

TuckaBlaze · 01-14-2008, 11:35 AM

Quote: Originally Posted by dawgnutz

Paint that bish before you drop it back in the truck!! LOL!

Looks great man! Have you been watching the other 5.7 vortec thread latley?

kinda. did i miss somthing?

the block/heads/valve covers was already was black, and thats what i wanted to to be.

unless ur talking about the intake. i was thinkin about that.

dawgnutz · 01-14-2008, 11:47 AM

Quote:

kinda. did i miss somthing?

the block/heads/valve covers was already was black, and thats what i wanted to to be.

unless ur talking about the intake. i was thinkin about that.

Right on, I was jsut asking, because that guy had some pretty good info in there.

I meant paint the block and stuff, the plastic intake may not take paint too well. but the block etc will.

TuckaBlaze · 01-14-2008, 10:44 PM

Quote: Originally Posted by dawgnutz

Right on, I was jsut asking, because that guy had some pretty good info in there.

I meant paint the block and stuff, the plastic intake may not take paint too well. but the block etc will.

The block is already painted black from the factory. its just a lil dirty right there in the front.

OK i gotta move my truck out of the shop where my "so called" friends was leting me work on it and use thier tools, because i helped build the frame i posted earlier in the thread. SOOOooo all day tomorrow i gota move all the peices to my dads house under the carport and work on it there. Means i have to buy a welder and crap also to finsh.

I would stay there but they started rushing me and crap the 2nd week there and started acting funny. The guy i helped build his fullsize frame that always talks to me has not said hardly said anything to me in the past week. i was there today and he didnt even say "whats up" or "good morning" or anything. No one that knows me would even look me in the face. Makes me feel really uncomfortable. I figured a few days ago it was just a bad day. but its continued and im not dealing with it... the last thing i need is them telling me that they are gonna keep my truck untill i pay them or some shit like that.

I swear, fukin haters man. I thought my friend would help me threw this. but instead hes just being a dick. sucks for me this just got exspensive.

TrYiN2LaYaDiMe · 01-14-2008, 10:52 PM

well man good luck with everything. you have had some major ups and downs i know that much. i hope to have my truck done for spring fling but i doubt it.

dawgnutz · 01-15-2008, 01:07 AM

Yeah good luck man! Keep your head up! sometimes shit like this just happens.

TuckaBlaze · 01-15-2008, 09:49 PM

Wow, i got my truck home today and i feel so much better about where my truck is.

even if i do have to work in the dirt.

TrYiN2LaYaDiMe · 01-15-2008, 10:55 PM

thats how it rolls man alot of ppl do it that way. i think chris did it that way before he had that shop behind his house.

Yogi · 05-02-2008, 09:28 AM

Any updates?

s10sixteynine · 05-03-2008, 02:45 AM

just a suggestion but they make an aluminum replacement for that upper part of the intake, dont ask me where i just know they put them on the small delivery trucks that come through the mechanic shop where i work, i dont work in the shop tho i drive an 18 wheeler

TuckaBlaze · 05-05-2008, 10:50 AM

Quote: Originally Posted by s10sixteynine

just a suggestion but they make an aluminum replacement for that upper part of the intake, dont ask me where i just know they put them on the small delivery trucks that come through the mechanic shop where i work, i dont work in the shop tho i drive an 18 wheeler

pics?

Quote: Originally Posted by Yogi

Any updates?

UPdates are that im geting my tax check and will start the 4 link soon.

Yogi · 05-05-2008, 10:57 AM

Quote: Originally Posted by TuckaBlaze

pics?

UPdates are that im geting my tax check and will start the 4 link soon.

Your work is looking great so far. Keep at it! Good luck!

TrYiN2LaYaDiMe · 05-05-2008, 04:34 PM

Quote: Originally Posted by TuckaBlaze

pics?

UPdates are that im geting my tax check and will start the 4 link soon.

only the 4 link??? i got one for sale.

s10sixteynine · 05-05-2008, 10:21 PM

Quote: Originally Posted by TuckaBlaze

pics?

UPdates are that im geting my tax check and will start the 4 link soon.

ill ask later this week, next time im at the shop and see if they have one or a part #

TuckaBlaze · 05-06-2008, 05:09 PM

Quote: Originally Posted by TrYiN2LaYaDiMe

only the 4 link??? i got one for sale.

well 4 link, engine, tranny, tranny cross member, and cut the drive shaft if i gotta.

i dunno how long my bars gotta be yet. its not a bolt on kinda thing...

TuckaBlaze · 06-08-2008, 06:16 PM

i just worked for 3 hours and made no progress... im pissed.

I hate having no help.

i got a cut on my hand and sand in my ass. nothing to show for it.

JollyRojer · 06-08-2008, 06:45 PM

2 bad u live hella far away or i would stop in to help

edit - ur not the only one who works in the dirt!

TuckaBlaze · 06-08-2008, 06:52 PM

i dont know shit about setting up this link system. all i know is the bars need to be close to the same length possible. top bars need a 40 degree angle and set pinon at right hight.

i figured make a test one with hardwood broom handles and watch to see if its gonna work before i dish out the money for link bars that will be the right length'

Edit: i hate welding with this flux cored shit... i need a bottle...

Yogi · 06-08-2008, 07:11 PM

Quote: Originally Posted by TuckaBlaze

i dont know shit about setting up this link system. all i know is the bars need to be close to the same length possible. top bars need a 40 degree angle and set pinon at right hight.

i figured make a test one with hardwood broom handles and watch to see if its gonna work before i dish out the money for link bars that will be the right length'

Edit: i hate welding with this flux cored shit... i need a bottle...

A bottle of gas to weld with or a bottle of Bourbon?

TrYiN2LaYaDiMe · 06-08-2008, 07:27 PM

Quote: Originally Posted by TuckaBlaze

.

I hate having no help.

pay someone to do the work. i know innovative and keef will do the work.

TuckaBlaze · 06-09-2008, 12:34 AM

Quote: Originally Posted by TrYiN2LaYaDiMe

pay someone to do the work. i know innovative and keef will do the work.

I dont want anyone to do this. i have to do this myself. it will mean more to me and i will enjoy it more if i do it myself. No since on spending more and getting less...

Quote: Originally Posted by Yogi

A bottle of gas to weld with or a bottle of Bourbon?

both

Yogi · 06-09-2008, 10:57 AM

Hang in there!

01-10-2008, 08:54 PM	#101
juiced dimebag Registered User Age: 18 Join Date: Oct 2007 Posts: 245 Location: BAKERSFIELD CA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD ya cuz when i traditional bodydropped mine i moved the cab back 3/4 but i didnt scoot my bed back too i just left it so my bed gap wouuld close im gald i took the time to scoot it back because it looks so good with the front wheels centered and a smaller bed gap
	[Reply w/Quote]

01-11-2008, 12:00 PM	#102
dawgnutz Undesired Vacation Age: 28 Join Date: Feb 2002 Posts: 2,744 Location: Huntington Beach, Ca. User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Werd....................when youmoved the cab mounts back, it wasn't too difficult was it? Since the mounts are round you don't really have to keep the pad at the angle it is in the front right?
	[Reply w/Quote]

01-11-2008, 08:15 PM	#103
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,198 Location: Leesville, LA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by dawgnutz Werd....................when youmoved the cab mounts back, it wasn't too difficult was it? Since the mounts are round you don't really have to keep the pad at the angle it is in the front right? Dunno havent done it yet. Ive seen a relocated front body mount, but im thinkin i can move the rear on on the frame back 3/4, and the front one on the cab forward 3/4... make since?
	[Reply w/Quote]

01-11-2008, 08:16 PM	#104
dawgnutz Undesired Vacation Age: 28 Join Date: Feb 2002 Posts: 2,744 Location: Huntington Beach, Ca. User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Yeah I see what you mean. I was asking juisced dimebag, sorry to whore. lol!
	[Reply w/Quote]

01-12-2008, 12:38 AM	#105
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,198 Location: Leesville, LA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by dawgnutz Yeah I see what you mean. I was asking juisced dimebag, sorry to whore. lol! O well shit.
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

01-13-2008, 10:31 PM	#106
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,198 Location: Leesville, LA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Engines together. One head 2 heads Lifter Lifter install The plate that keeps the roller lifters strait. Rods and some rockers. Plate that holds the plates that hold the rockers strait. It looks like an ENGINE! Sorry I could not find my good camra. It was cell phone pics, or no pics. Last edited by TuckaBlaze : 01-13-2008 at 10:33 PM.
	[Reply w/Quote]

01-14-2008, 12:22 AM	#108
juiced dimebag Registered User Age: 18 Join Date: Oct 2007 Posts: 245 Location: BAKERSFIELD CA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by dawgnutz Yeah I see what you mean. I was asking juisced dimebag, sorry to whore. lol! well since it was a traditional when i got the floor and fire wall cut i just scooted the body back and left the floor where it was...but the only problem that i ran into was i had a difficult time with radiator clearence between the dropped frame horns and steering box because i scooted the body closer to all of that
	[Reply w/Quote]

01-14-2008, 11:05 AM	#109
dawgnutz Undesired Vacation Age: 28 Join Date: Feb 2002 Posts: 2,744 Location: Huntington Beach, Ca. User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: well since it was a traditional when i got the floor and fire wall cut i just scooted the body back and left the floor where it was...but the only problem that i ran into was i had a difficult time with radiator clearence between the dropped frame horns and steering box because i scooted the body closer to all of that Ahh Fair enough! did you have to bend the firewall and rear cab wall back at an angle very far? did it look ok, or was it pretty obvious. 3/4" seems like alot. Quote: Engines together. One head 2 heads Lifter Lifter install The plate that keeps the roller lifters strait. Rods and some rockers. Plate that holds the plates that hold the rockers strait. It looks like an ENGINE! Sorry I could not find my good camra. It was cell phone pics, or no pics. Hey Tucka! Paint that bish before you drop it back in the truck!! LOL! Looks great man! Have you been watching the other 5.7 vortec thread latley? Last edited by dawgnutz : 01-14-2008 at 11:06 AM.
	[Reply w/Quote]

01-14-2008, 11:35 AM	#110
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,198 Location: Leesville, LA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by dawgnutz Paint that bish before you drop it back in the truck!! LOL! Looks great man! Have you been watching the other 5.7 vortec thread latley? kinda. did i miss somthing? the block/heads/valve covers was already was black, and thats what i wanted to to be. unless ur talking about the intake. i was thinkin about that.
	[Reply w/Quote]

01-14-2008, 11:47 AM	#111
dawgnutz Undesired Vacation Age: 28 Join Date: Feb 2002 Posts: 2,744 Location: Huntington Beach, Ca. User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: kinda. did i miss somthing? the block/heads/valve covers was already was black, and thats what i wanted to to be. unless ur talking about the intake. i was thinkin about that. Right on, I was jsut asking, because that guy had some pretty good info in there. I meant paint the block and stuff, the plastic intake may not take paint too well. but the block etc will.
	[Reply w/Quote]

01-14-2008, 10:44 PM	#112
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,198 Location: Leesville, LA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by dawgnutz Right on, I was jsut asking, because that guy had some pretty good info in there. I meant paint the block and stuff, the plastic intake may not take paint too well. but the block etc will. The block is already painted black from the factory. its just a lil dirty right there in the front. OK i gotta move my truck out of the shop where my "so called" friends was leting me work on it and use thier tools, because i helped build the frame i posted earlier in the thread. SOOOooo all day tomorrow i gota move all the peices to my dads house under the carport and work on it there. Means i have to buy a welder and crap also to finsh. I would stay there but they started rushing me and crap the 2nd week there and started acting funny. The guy i helped build his fullsize frame that always talks to me has not said hardly said anything to me in the past week. i was there today and he didnt even say "whats up" or "good morning" or anything. No one that knows me would even look me in the face. Makes me feel really uncomfortable. I figured a few days ago it was just a bad day. but its continued and im not dealing with it... the last thing i need is them telling me that they are gonna keep my truck untill i pay them or some shit like that. I swear, fukin haters man. I thought my friend would help me threw this. but instead hes just being a dick. sucks for me this just got exspensive. Last edited by TuckaBlaze : 01-14-2008 at 10:46 PM.
	[Reply w/Quote]

01-14-2008, 10:52 PM	#113
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,791 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD well man good luck with everything. you have had some major ups and downs i know that much. i hope to have my truck done for spring fling but i doubt it.
	[Reply w/Quote]

01-15-2008, 01:07 AM	#114
dawgnutz Undesired Vacation Age: 28 Join Date: Feb 2002 Posts: 2,744 Location: Huntington Beach, Ca. User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Yeah good luck man! Keep your head up! sometimes shit like this just happens.
	[Reply w/Quote]

01-15-2008, 09:49 PM	#115
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,198 Location: Leesville, LA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Wow, i got my truck home today and i feel so much better about where my truck is. even if i do have to work in the dirt.
	[Reply w/Quote]

01-15-2008, 10:55 PM	#116
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,791 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD thats how it rolls man alot of ppl do it that way. i think chris did it that way before he had that shop behind his house.
	[Reply w/Quote]

05-02-2008, 09:28 AM	#117
Yogi Registered (Ab) User Join Date: Feb 2008 Posts: 3,181 Location: League City, TX (Houston) User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Any updates?
	[Reply w/Quote]

05-03-2008, 02:45 AM	#118
s10sixteynine lets get hammered Join Date: Mar 2007 Posts: 1,871 Location: anniston, al User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD just a suggestion but they make an aluminum replacement for that upper part of the intake, dont ask me where i just know they put them on the small delivery trucks that come through the mechanic shop where i work, i dont work in the shop tho i drive an 18 wheeler Last edited by s10sixteynine : 05-03-2008 at 02:48 AM.
	[Reply w/Quote]

05-05-2008, 10:50 AM	#119
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,198 Location: Leesville, LA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by s10sixteynine just a suggestion but they make an aluminum replacement for that upper part of the intake, dont ask me where i just know they put them on the small delivery trucks that come through the mechanic shop where i work, i dont work in the shop tho i drive an 18 wheeler pics? Quote: Originally Posted by Yogi Any updates? UPdates are that im geting my tax check and will start the 4 link soon.
	[Reply w/Quote]

05-05-2008, 10:57 AM	#120
Yogi Registered (Ab) User Join Date: Feb 2008 Posts: 3,181 Location: League City, TX (Houston) User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by TuckaBlaze pics? UPdates are that im geting my tax check and will start the 4 link soon. Your work is looking great so far. Keep at it! Good luck!
	[Reply w/Quote]

05-05-2008, 04:34 PM	#121
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,791 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by TuckaBlaze pics? UPdates are that im geting my tax check and will start the 4 link soon. only the 4 link??? i got one for sale.
	[Reply w/Quote]

05-05-2008, 10:21 PM	#122
s10sixteynine lets get hammered Join Date: Mar 2007 Posts: 1,871 Location: anniston, al User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by TuckaBlaze pics? UPdates are that im geting my tax check and will start the 4 link soon. ill ask later this week, next time im at the shop and see if they have one or a part #
	[Reply w/Quote]

05-06-2008, 05:09 PM	#123
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,198 Location: Leesville, LA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by TrYiN2LaYaDiMe only the 4 link??? i got one for sale. well 4 link, engine, tranny, tranny cross member, and cut the drive shaft if i gotta. i dunno how long my bars gotta be yet. its not a bolt on kinda thing...
	[Reply w/Quote]

06-08-2008, 06:16 PM	#124
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,198 Location: Leesville, LA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD i just worked for 3 hours and made no progress... im pissed. I hate having no help. i got a cut on my hand and sand in my ass. nothing to show for it.
	[Reply w/Quote]

06-08-2008, 06:45 PM	#125
JollyRojer Give me 3 yrs... Age: 20 Join Date: Apr 2005 Posts: 6,052 Location: Southern NH User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD 2 bad u live hella far away or i would stop in to help edit - ur not the only one who works in the dirt! Last edited by JollyRojer : 06-08-2008 at 06:49 PM.
	[Reply w/Quote]

06-08-2008, 06:52 PM	#126
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,198 Location: Leesville, LA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD i dont know shit about setting up this link system. all i know is the bars need to be close to the same length possible. top bars need a 40 degree angle and set pinon at right hight. i figured make a test one with hardwood broom handles and watch to see if its gonna work before i dish out the money for link bars that will be the right length' Edit: i hate welding with this flux cored shit... i need a bottle... Last edited by TuckaBlaze : 06-08-2008 at 06:54 PM.
	[Reply w/Quote]

06-08-2008, 07:11 PM	#127
Yogi Registered (Ab) User Join Date: Feb 2008 Posts: 3,181 Location: League City, TX (Houston) User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by TuckaBlaze i dont know shit about setting up this link system. all i know is the bars need to be close to the same length possible. top bars need a 40 degree angle and set pinon at right hight. i figured make a test one with hardwood broom handles and watch to see if its gonna work before i dish out the money for link bars that will be the right length' Edit: i hate welding with this flux cored shit... i need a bottle... A bottle of gas to weld with or a bottle of Bourbon?
	[Reply w/Quote]

06-08-2008, 07:27 PM	#128
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,791 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by TuckaBlaze . I hate having no help. pay someone to do the work. i know innovative and keef will do the work.
	[Reply w/Quote]

06-09-2008, 12:34 AM	#129
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,198 Location: Leesville, LA User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Quote: Originally Posted by TrYiN2LaYaDiMe pay someone to do the work. i know innovative and keef will do the work. I dont want anyone to do this. i have to do this myself. it will mean more to me and i will enjoy it more if i do it myself. No since on spending more and getting less... Quote: Originally Posted by Yogi A bottle of gas to weld with or a bottle of Bourbon? both
	[Reply w/Quote]

06-09-2008, 10:57 AM	#130
Yogi Registered (Ab) User Join Date: Feb 2008 Posts: 3,181 Location: League City, TX (Houston) User is: OffLine	Re: (Project) "Finders Keepers" 5.7 Vortec, SFBD Hang in there!
	[Reply w/Quote]