[ProJecT] Feel the LUV

Wicked Mayhem · 07-03-2012, 01:48 PM

there is enough room to get them out.

and i am going to either get my stock glass notched for the bars, or i will be getting a new back glass cut. I have a new gasket on the way.

Wicked Mayhem · 07-04-2012, 11:08 PM

Got the glass marked. Gonna take it to the glass shop tomorrow to see about getting it done.

blazed89 · 07-05-2012, 10:08 AM

I believe the back glass isn't tempered so it can be done but cutting glass that is old will possibly break after you score it, hope ya got an extra. I use to be a glass man for some time that curve would be a bitch to cut out it may be easier to get a new one cut with the holes already in it but i could be wrong. Nice work on the cage looks great man.

Wicked Mayhem · 07-05-2012, 10:54 AM

yeah i dont mind having a new one cut. they said they might be able to cut this one but they wanted to see it first. i figure between what i have they can make me a new glass.

bigpokie · 07-05-2012, 08:22 PM

so what happened to the taco stand / water sticker ? iSad. looks good tho

Wicked Mayhem · 07-05-2012, 08:40 PM

It's in the garage now.

My glass couldn't be cut. But they can cut it on non tempered I guess? They didn't have any 3/16 in stock though.

Got everything on the cage welded up and got it all tied into the frame. Gonna rebuild my dash tomorrow, and paint the cage and be done with it.

blazed89 · 07-05-2012, 09:52 PM

Yeah tempered will explode when you try to cut into it but annealed glass you can cut and than get it tempered. You might want to pad the bars around the hole or even run a lexan window if it has any flex and the bar taps it could possibly break it.

Wicked Mayhem · 07-05-2012, 11:05 PM

It will have 3/8" all around the bar. And I plan on running some type of seal around it. But for now I think I'm gonna run lexan to make sure nothing hits lol

doored454 · 07-06-2012, 09:18 AM

So you just have to sandwich the floor between the plates right, after you weld the top plate to the floor? Looks legit man.

Wicked Mayhem · 07-07-2012, 12:26 PM

Yeah I Setup where I wanted the plates, traced it on the floor. Then cut out the floor 1/2" inside the plate size. That away after the cage is tacked together I could drop it down to weld it. Then lifted the cage back up and stuck the plates under it and welded them to floor and cage to that. the bolted plates to bottom side of cab and connected them to the frame.

Wicked Mayhem · 07-07-2012, 09:44 PM

NevurMind85 · 07-07-2012, 09:58 PM

damn i love seeing it everytime you post pics.

Tuckin15's · 07-07-2012, 11:50 PM

Holy shit wicked i luv your truck. wanna trade?

Tuckin15's · 07-08-2012, 12:50 AM

Ok i looked every where through the thread what tire sizes are u running right now?

Wicked Mayhem · 07-08-2012, 09:27 AM

Sure let's trade. Then I can also get rid of my silverado and have a bad ass daily project.

And I'm running a 155/60 and 275/50

RQCustoms · 07-08-2012, 10:27 AM

this truck is so friggin' bad arse!!!

Tuckin15's · 07-08-2012, 12:21 PM

Quote: Originally Posted by Wicked Mayhem

Sure let's trade. Then I can also get rid of my silverado and have a bad ass daily project.

And I'm running a 155/60 and 275/50

Lol, I was really not expecting that to be your reaction.

Thanks for the tire sizes I'm trying to setup rims for my truck and your truck has the PERFECT stance IMO. I'm looking at the weld RTS in black.

Wicked Mayhem · 07-08-2012, 12:57 PM

Haha. Everything has a price tag!

And I doubt you'll want a 155/60 for the front. It's only 22" tall. I think smart car changed the tire size and runs a 176/60 or 175/55 now. I bet a 165r is what you'd want for an s10

Tuckin15's · 07-08-2012, 01:01 PM

Quote: Originally Posted by Wicked Mayhem

Haha. Everything has a price tag!

And I doubt you'll want a 155/60 for the front. It's only 22" tall. I think smart car changed the tire size and runs a 176/60 or 175/55 now. I bet a 165r is what you'd want for an s10

Yea I'll have to bump it up just a tad right now I'm running a 24" overall diameter in the front, and i would like to keep the truck exactly were it sits now because the oil pan is so low to the ground.

TRPLS10 · 07-08-2012, 02:02 PM

if i were you id trade ross! haha

90blueS10 · 07-09-2012, 02:32 AM

I didn't like the idea of the cage. But it looks sick.

LoRollinLS · 07-10-2012, 12:12 PM

Quote: Originally Posted by Wicked Mayhem

man i didnt even ask. he hooked the comp up to it after i drove it to my dads and i remember asking if it was high temp he said yeah but its heat soaked. next time i drive it ill try to remember to hook hp tuners up and check it out for ya.

Thanks man. I was wondering if it would heat soak a lot easier being so close to the fans. Oh and the cage is looking tite!

Wicked Mayhem · 07-10-2012, 05:16 PM

yeah i wanted a cage cause they look bad ass, but it makes it a little more hassle to get in. not bad though. it needed a cage with the thickness of 2x3 i used.

and i have new knock sensors and harness for it. need to put it all on this weekend.

Wicked Mayhem · 07-17-2012, 10:29 PM

New knock sensors and harness

All back together with a fixed orifice PCV and a vented oil cap.

Didn't like the breather being chrome so I painted it black.

Wicked Mayhem · 07-18-2012, 11:04 PM

TRPLS10 · 07-19-2012, 02:17 PM

looking good man

JDrummond Service Inc. · 07-19-2012, 02:51 PM

looks great man!

90blueS10 · 07-19-2012, 07:18 PM

Im so jealous.

Wicked Mayhem · 08-06-2012, 10:19 PM

Redoing the halo and a-pillar bars. As you can see in the pics they are not very tight fitting. Bugged the hell out of me. Gonna use my dads expertise this time instead of trying to do it on my own

hes good with the bender.

I think the tubing will be here tomorrow, so probably this weekend if my dad and I don't work we will get it knocked out.

LoRollinLS · 08-07-2012, 09:19 AM

Sometimes things don't work out right the first time... here's to more garage time!!

Wicked Mayhem · 08-08-2012, 11:53 PM

Woohoo. More sweating my ass off!

spectre · 08-10-2012, 05:19 AM

Whats up Wicked , man all i have to say is i luv this project, ive been watching your progress for the better part of 3 yrs just never had a reason to be a member till now. I had a 81 chevy luv bout a yr ago and now i have a 01 s10. But anyway sweet project man

Wicked Mayhem · 08-10-2012, 04:25 PM

thanks man..

GM · 08-10-2012, 06:22 PM

There really isn't alot of A-Pillar to hide it behind eh?

Wicked Mayhem · 08-10-2012, 10:56 PM

Nope. This is about as good as it gets with hiding it. Once it's black with the windshield back it it'll be more hidden

mostizzle · 08-10-2012, 11:43 PM

Looks a lot better though.

spectre · 08-11-2012, 08:11 PM

What size piping you using

Wicked Mayhem · 08-11-2012, 11:02 PM

1-5/8 DOM.

Cage is all done and welded. Got it painted as well. Windshield may go in tomorrow.

svmcgover · 08-12-2012, 04:48 PM

Just read your thread yesterday. Killer ride. Saw this today on CL

http://tippecanoe.craigslist.org/pts/3192525604.html

NevurMind85 · 08-12-2012, 06:51 PM

oooo crawfordsville indiana wish i had 600 and a place to work on it.

Wicked Mayhem · 08-12-2012, 09:24 PM

Before. Note all the space between a frame and bar.

Now

It's a thousand times better fitting now. I tried taking pics to kind of hide how shitty it was before. I love the way it's in there now.

doored454 · 08-12-2012, 09:31 PM

Much better, good call on redoing that.

Dvst8r · 08-14-2012, 01:08 PM

does look better

spectre · 08-15-2012, 10:32 PM

Looks good man, id like to put an ls3 or ls7 in my dime but just dont have the money to do that got alot of work to do on her anyway ill try to get a thread going so you can give me some intel

bushwickbill94 · 08-17-2012, 12:45 PM

looks much better

Wicked Mayhem · 08-22-2012, 03:01 PM

nfamus10 · 08-22-2012, 03:04 PM

Yep. No more inspections.

Wicked Mayhem · 08-22-2012, 03:28 PM

That's why I like antique plates. No stickers on windshield, and no front plate.

nfamus10 · 08-22-2012, 03:33 PM

Word. Studebaker is running them. Same story as collectors insurance, I am "on the way to autozone" if I get pulled over or wreck.

Wicked Mayhem · 08-22-2012, 04:39 PM

i have regular liability on the truck. i remember my dad trying to get some type of old car insurance for his old car and they denied him because it appeared to be a race car. had fattys on the back and a full cage. so im assuming i cant get it either lol

07-03-2012, 01:48 PM	#3251
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV there is enough room to get them out. and i am going to either get my stock glass notched for the bars, or i will be getting a new back glass cut. I have a new gasket on the way.
	[Reply w/Quote]

07-04-2012, 11:08 PM	#3252
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV Got the glass marked. Gonna take it to the glass shop tomorrow to see about getting it done.
	[Reply w/Quote]

07-05-2012, 10:08 AM	#3253
blazed89 Registered User Age: 27 Join Date: Mar 2011 Posts: 56 Location: Kansas City, KS User is: OffLine	Re: [ProJecT] Feel the LUV I believe the back glass isn't tempered so it can be done but cutting glass that is old will possibly break after you score it, hope ya got an extra. I use to be a glass man for some time that curve would be a bitch to cut out it may be easier to get a new one cut with the holes already in it but i could be wrong. Nice work on the cage looks great man.
	[Reply w/Quote]

07-05-2012, 10:54 AM	#3254
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV yeah i dont mind having a new one cut. they said they might be able to cut this one but they wanted to see it first. i figure between what i have they can make me a new glass.
	[Reply w/Quote]

07-05-2012, 08:22 PM	#3255
bigpokie you gonna leauurn today Join Date: Feb 2008 Posts: 1,283 Location: nashville TN User is: OffLine	Re: [ProJecT] Feel the LUV so what happened to the taco stand / water sticker ? iSad. looks good tho
	[Reply w/Quote]

07-05-2012, 08:40 PM	#3256
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV It's in the garage now. My glass couldn't be cut. But they can cut it on non tempered I guess? They didn't have any 3/16 in stock though. Got everything on the cage welded up and got it all tied into the frame. Gonna rebuild my dash tomorrow, and paint the cage and be done with it.
	[Reply w/Quote]

07-05-2012, 09:52 PM	#3257
blazed89 Registered User Age: 27 Join Date: Mar 2011 Posts: 56 Location: Kansas City, KS User is: OffLine	Re: [ProJecT] Feel the LUV Yeah tempered will explode when you try to cut into it but annealed glass you can cut and than get it tempered. You might want to pad the bars around the hole or even run a lexan window if it has any flex and the bar taps it could possibly break it.
	[Reply w/Quote]

07-05-2012, 11:05 PM	#3258
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV It will have 3/8" all around the bar. And I plan on running some type of seal around it. But for now I think I'm gonna run lexan to make sure nothing hits lol
	[Reply w/Quote]

07-06-2012, 09:18 AM	#3259
doored454 PAGING DR. FAGGOT! Age: 26 Join Date: Mar 2005 Posts: 7,374 Location: Pen Argyl, PA User is: OffLine	Re: [ProJecT] Feel the LUV So you just have to sandwich the floor between the plates right, after you weld the top plate to the floor? Looks legit man.
	[Reply w/Quote]

07-07-2012, 12:26 PM	#3260
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV Yeah I Setup where I wanted the plates, traced it on the floor. Then cut out the floor 1/2" inside the plate size. That away after the cage is tacked together I could drop it down to weld it. Then lifted the cage back up and stuck the plates under it and welded them to floor and cage to that. the bolted plates to bottom side of cab and connected them to the frame.
	[Reply w/Quote]

07-07-2012, 09:44 PM	#3261
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV
	[Reply w/Quote]

07-07-2012, 09:58 PM	#3262
NevurMind85 Oasis Customs Age: 27 Join Date: Jan 2006 Posts: 6,257 Location: Floyds Knobs/Clarksville, IN User is: Online	Re: [ProJecT] Feel the LUV damn i love seeing it everytime you post pics.
	[Reply w/Quote]

07-07-2012, 11:50 PM	#3263
Tuckin15's 5.3 Lover Age: 21 Join Date: Aug 2008 Posts: 6,142 Location: The Greatest town ever. User is: OffLine	Re: [ProJecT] Feel the LUV Holy shit wicked i luv your truck. wanna trade?
	[Reply w/Quote]

07-08-2012, 12:50 AM	#3264
Tuckin15's 5.3 Lover Age: 21 Join Date: Aug 2008 Posts: 6,142 Location: The Greatest town ever. User is: OffLine	Re: [ProJecT] Feel the LUV Ok i looked every where through the thread what tire sizes are u running right now?
	[Reply w/Quote]

07-08-2012, 09:27 AM	#3265
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV Sure let's trade. Then I can also get rid of my silverado and have a bad ass daily project. And I'm running a 155/60 and 275/50
	[Reply w/Quote]

07-08-2012, 10:27 AM	#3266
RQCustoms Registered User Join Date: Jan 2011 Posts: 780 Location: User is: OffLine	Re: [ProJecT] Feel the LUV this truck is so friggin' bad arse!!!
	[Reply w/Quote]

07-08-2012, 12:21 PM	#3267
Tuckin15's 5.3 Lover Age: 21 Join Date: Aug 2008 Posts: 6,142 Location: The Greatest town ever. User is: OffLine	Re: [ProJecT] Feel the LUV Quote: Originally Posted by Wicked Mayhem Sure let's trade. Then I can also get rid of my silverado and have a bad ass daily project. And I'm running a 155/60 and 275/50 Lol, I was really not expecting that to be your reaction. Thanks for the tire sizes I'm trying to setup rims for my truck and your truck has the PERFECT stance IMO. I'm looking at the weld RTS in black.
	[Reply w/Quote]

07-08-2012, 12:57 PM	#3268
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV Haha. Everything has a price tag! And I doubt you'll want a 155/60 for the front. It's only 22" tall. I think smart car changed the tire size and runs a 176/60 or 175/55 now. I bet a 165r is what you'd want for an s10
	[Reply w/Quote]

07-08-2012, 01:01 PM	#3269
Tuckin15's 5.3 Lover Age: 21 Join Date: Aug 2008 Posts: 6,142 Location: The Greatest town ever. User is: OffLine	Re: [ProJecT] Feel the LUV Quote: Originally Posted by Wicked Mayhem Haha. Everything has a price tag! And I doubt you'll want a 155/60 for the front. It's only 22" tall. I think smart car changed the tire size and runs a 176/60 or 175/55 now. I bet a 165r is what you'd want for an s10 Yea I'll have to bump it up just a tad right now I'm running a 24" overall diameter in the front, and i would like to keep the truck exactly were it sits now because the oil pan is so low to the ground.
	[Reply w/Quote]

07-08-2012, 02:02 PM	#3270
TRPLS10 Registered User Age: 21 Join Date: Jul 2008 Posts: 3,668 Location: Wichita Ks User is: OffLine	Re: [ProJecT] Feel the LUV if i were you id trade ross! haha
	[Reply w/Quote]

07-09-2012, 02:32 AM	#3271
90blueS10 Pizza Technician Age: 21 Join Date: Sep 2007 Posts: 11,871 Location: User is: OffLine	Re: [ProJecT] Feel the LUV I didn't like the idea of the cage. But it looks sick.
	[Reply w/Quote]

07-10-2012, 12:12 PM	#3272
LoRollinLS Fine Tuning... Age: 28 Join Date: Dec 2001 Posts: 1,509 Location: Tennessee User is: OffLine	Re: [ProJecT] Feel the LUV Quote: Originally Posted by Wicked Mayhem man i didnt even ask. he hooked the comp up to it after i drove it to my dads and i remember asking if it was high temp he said yeah but its heat soaked. next time i drive it ill try to remember to hook hp tuners up and check it out for ya. Thanks man. I was wondering if it would heat soak a lot easier being so close to the fans. Oh and the cage is looking tite!
	[Reply w/Quote]

07-10-2012, 05:16 PM	#3273
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV yeah i wanted a cage cause they look bad ass, but it makes it a little more hassle to get in. not bad though. it needed a cage with the thickness of 2x3 i used. and i have new knock sensors and harness for it. need to put it all on this weekend.
	[Reply w/Quote]

07-17-2012, 10:29 PM	#3274
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV New knock sensors and harness All back together with a fixed orifice PCV and a vented oil cap. Didn't like the breather being chrome so I painted it black.
	[Reply w/Quote]

07-18-2012, 11:04 PM	#3275
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV
	[Reply w/Quote]

07-19-2012, 02:17 PM	#3276
TRPLS10 Registered User Age: 21 Join Date: Jul 2008 Posts: 3,668 Location: Wichita Ks User is: OffLine	Re: [ProJecT] Feel the LUV looking good man
	[Reply w/Quote]

07-19-2012, 02:51 PM	#3277
JDrummond Service Inc. We Bend Stainless Age: 27 Join Date: Nov 2009 Posts: 2,781 Location: Grand Haven, MI User is: OffLine	Re: [ProJecT] Feel the LUV looks great man!
	[Reply w/Quote]

07-19-2012, 07:18 PM	#3278
90blueS10 Pizza Technician Age: 21 Join Date: Sep 2007 Posts: 11,871 Location: User is: OffLine	Re: [ProJecT] Feel the LUV Im so jealous.
	[Reply w/Quote]

08-06-2012, 10:19 PM	#3279
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV Redoing the halo and a-pillar bars. As you can see in the pics they are not very tight fitting. Bugged the hell out of me. Gonna use my dads expertise this time instead of trying to do it on my own hes good with the bender. I think the tubing will be here tomorrow, so probably this weekend if my dad and I don't work we will get it knocked out.
	[Reply w/Quote]

08-07-2012, 09:19 AM	#3280
LoRollinLS Fine Tuning... Age: 28 Join Date: Dec 2001 Posts: 1,509 Location: Tennessee User is: OffLine	Re: [ProJecT] Feel the LUV Sometimes things don't work out right the first time... here's to more garage time!!
	[Reply w/Quote]

08-08-2012, 11:53 PM	#3281
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV Woohoo. More sweating my ass off!
	[Reply w/Quote]

08-10-2012, 05:19 AM	#3282
spectre Registered User Join Date: Aug 2012 Posts: 31 Location: Rockingham,NC User is: OffLine	Re: [ProJecT] Feel the LUV Whats up Wicked , man all i have to say is i luv this project, ive been watching your progress for the better part of 3 yrs just never had a reason to be a member till now. I had a 81 chevy luv bout a yr ago and now i have a 01 s10. But anyway sweet project man
	[Reply w/Quote]

08-10-2012, 04:25 PM	#3283
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV thanks man..
	[Reply w/Quote]

08-10-2012, 06:22 PM	#3284
GM Registered User Age: 25 Join Date: Mar 2009 Posts: 1,459 Location: Ontario Canada User is: OffLine	Re: [ProJecT] Feel the LUV There really isn't alot of A-Pillar to hide it behind eh?
	[Reply w/Quote]

08-10-2012, 10:56 PM	#3285
Wicked Mayhem LSX LUV Owner Join Date: Nov 2002 Posts: 18,554 Location: The Garage User is: OffLine	Re: [ProJecT] Feel the LUV Nope. This is about as good as it gets with hiding it. Once it's black with the windshield back it it'll be more hidden
	[Reply w/Quote]