[Project] Blazer Rezurection

Fortunat72 · 06-18-2008, 03:13 PM

yea and i see lines look...

and the pic quality got a little worse becuase of paint sorry

wildman ss · 06-18-2008, 04:22 PM

yeah thats one of the places it was keyed and I just sanded it down and painted over it, its been that way for months now

cpolaris502 · 06-18-2008, 04:22 PM

i can see the key marks on the tailgate in one of the other pics too. i hope that never happens to me.

The Griff · 06-18-2008, 04:22 PM

haha sorry to call you out on that man, haha but still looks good

wildman ss · 06-18-2008, 11:44 PM

Quote: Originally Posted by jakethegriff

haha sorry to call you out on that man, haha but still looks good

its all good, its a piece and I know it, the only thing holding together is duct tape, zipties and spray paint

cpolaris502 · 06-19-2008, 10:20 AM

i was going to ask how you attached the roll pan...

wildman ss · 06-19-2008, 02:59 PM

Quote: Originally Posted by cpolaris502

i was going to ask how you attached the roll pan...

actualy I splurged a little bit and bolted it to the step shavers

and I parked next to a smart car today and I was actualy lower than it

blazerxtreme18 · 06-22-2008, 12:35 PM

did you use the Monroe MA759MM air shocks???

blazed88 · 06-23-2008, 11:53 AM

nice blazer. glad to see another blazer in ga going down

cpolaris502 · 06-23-2008, 12:15 PM

did you have a fun time reaching up there with the bolts? i can barely get one on the bottom of mine. compressors and charcoal can are in the way on each side.

wildman ss · 06-25-2008, 05:41 PM

Quote: Originally Posted by blazerxtreme18

did you use the Monroe MA759MM air shocks???

actually I used the gabriel hijackers from autozone, they're cheaper and have a lifetime warranty

and yeah that charcol canister was a pain in the ass

wildman ss · 06-27-2008, 08:48 PM

couple pics from scrapin the coast

J.Cakes · 06-28-2008, 01:39 AM

those pics actually make your truck look low

4UH8Rs · 06-28-2008, 07:26 AM

i spot a little camber in back

cpolaris502 · 06-28-2008, 11:59 AM

Quote: Originally Posted by 4UH8Rs

i spot a little camber in back

Because he had the driver side down and passenger side up.

wildman ss · 06-28-2008, 02:43 PM

Quote: Originally Posted by cpolaris502

Because he had the driver side down and passenger side up.

yeah its the body leaning not the wheel

when I hit sides the rear tucks more than the front

hrspwr454 · 06-28-2008, 04:24 PM

saw there was a few pics of your truck on cardomain in the scrapin the coast pics.

http://www.cardomain.com/event/2008/06/21/STC?c=3

wildman ss · 07-04-2008, 01:18 PM

I'm sure some of you have heard the story by now how I drug through double walled 5/8" inch line the other day

J.Cakes · 07-04-2008, 01:24 PM

how did you do that?

wildman ss · 07-04-2008, 01:28 PM

Quote: Originally Posted by 00redsdime

how did you do that?

dragging, it wasn't even on it hard, just what you see in the pic

cpolaris502 · 07-04-2008, 06:51 PM

where would we hear this story? go on...

wildman ss · 07-04-2008, 10:53 PM

Quote: Originally Posted by cpolaris502

where would we hear this story? go on...

Most of the GA guys have heard it all ready

but me and Prime. were headed to a meet at the Varsity and he was taking pics as I was rolling down the high way, so I decided to drag a little bit, nothin hard. Still had like 40 psi in the bags so I wasn't layin on it then suddenly I hear a PSSSSSSHHHHHHHHHHHH. Then my tank drops to 0 and my bags go to 0 as well and now I'm really draggin and had to make a quick detour off the off ramp. After a while we managed to find out where the leak was coming from and plug the lines and all that. But now only my front driverside bag would air up and my air shocks would only hold air for like 5 seconds. We managed to get it back home by going a back way and going slow with the compressor on close to the whole time.

As of now I know I dragged through some 5/8" line and my 3/16" airshock line and I come out today and my tank is empty so IDK right now but I'llln o more tommorow.

blazed00 · 07-04-2008, 11:09 PM

thats sucks, i blew a compressor line 4 hours from my house in Bum fuk before. sucks, good thing you could make it back tho

Prime. · 07-05-2008, 12:25 AM

brent, the tank drained cuase of the plugs we did in the gauge line. mine used to do it all the time.

wildman ss · 07-05-2008, 01:24 AM

Quote: Originally Posted by Prime.

brent, the tank drained cuase of the plugs we did in the gauge line. mine used to do it all the time.

you're probably right, I can't wait to get that piece of 5/8 off so I can see how ****ed it is

Also can you send me the rest of the pictures

Prime. · 07-05-2008, 01:39 AM

only got these other 2 before i realized something was wrong and threw the camera down. i didn't have the camera out when it was really dragging hard.

wildman ss · 07-05-2008, 01:26 PM

thats cool,

I pulled the line today and found out that sparks didn't get to it, it blew out from the inside. The area around it was all bubbly. So I'm thinking the exhaust has been blowin on it for 6 months now and for some reason while I was draggin decided to blow out. I do however have a tiny hole in my airshock line from the sparks but that is easily fixed.

BudRacing · 07-06-2008, 05:49 PM

Shroud that shit.

ZQ8 Blazer · 07-21-2008, 05:12 AM

Other than spreading the side pieces out what else did you have to do to get the pan to fit? What brand is the pan? Does spreading them out mean you just adjusted the side pieces outward?

BudRacing · 08-04-2008, 10:19 AM

Brent, Hurry up and bag your rear so I can buy your rear leafs.

hrspwr454 · 08-05-2008, 12:29 AM

Quote: Originally Posted by BudRacing

Brent, Hurry up and bag your rear so I can buy your rear leafs.

i think he has the pre 98 leafs, so i dont think theyd work on your blazer.

BudRacing · 08-05-2008, 09:57 AM

good call

Forklift · 08-05-2008, 11:24 AM

makes me wanna buy a 2nd gen!

wildman ss · 08-05-2008, 01:03 PM

Quote: Originally Posted by hrspwr454

i think he has the pre 98 leafs, so i dont think theyd work on your blazer.

damnit I was gonna trick him into buying them

and on that note I have a set of 3" beltech lowering leafsprings that were used for about a month or two for sale

The Griff · 08-05-2008, 01:08 PM

hey brent you should clear up you pm box

wildman ss · 08-05-2008, 01:09 PM

Quote: Originally Posted by jakethegriff

hey brent you should clear up you pm box

too lazy

The Griff · 08-05-2008, 01:10 PM

no sales for you

wildman ss · 08-05-2008, 01:32 PM

I cleared it just for you, so you can send me secret messages...

no homo

wildman ss · 08-06-2008, 03:53 PM

Quote: Originally Posted by ZQ8 Blazer

Other than spreading the side pieces out what else did you have to do to get the pan to fit? What brand is the pan? Does spreading them out mean you just adjusted the side pieces outward?

its a grant kustoms pan, all smooth, metal. Yeah I just redrilled one of the holes on the step shavers a 1/4" out so the rollpan would fit in between.

B.I 559 · 08-06-2008, 04:00 PM

Quote: Originally Posted by wildman ss

what year bumper is that.....or valence (how ever the hell you spell that)

Kovz · 08-06-2008, 04:08 PM

brent, how did you get your chrome bumper to hold so tight up against the fenders?

wildman ss · 08-06-2008, 04:25 PM

Quote: Originally Posted by kovz34

brent, how did you get your chrome bumper to hold so tight up against the fenders?

Its hard to explain so I'll grab a pic for you right quick

and its a 98+ bumper with a 95-97 valance

wildman ss · 08-06-2008, 04:33 PM

there is a hole in the fender that sits below the bumper line so I took a bolt and stuck it through the hole and secure it in place with a nut on each side, its a pain in the ass to get the nut on the back side but its possible. Then I just cut a piece of coolant over flow tubing to put around the head of the bolt so it would rub against the bottom of the bumper.

if you need more pics or need something clarified just let me know

ZQ8 Blazer · 08-06-2008, 11:01 PM

What??? That pic confuses me.

Kovz · 08-06-2008, 11:03 PM

I went out and saw it on mine. Good idea. Doesn't look too hard either. I might have to give it a try

wildman ss · 08-19-2008, 02:28 PM

Quote: Originally Posted by kovz34

I went out and saw it on mine. Good idea. Doesn't look too hard either. I might have to give it a try

yeah its solid and you can still take the bumper off without messin with it

last big show of the season this weekend

The Griff · 08-21-2008, 11:06 AM

i really like that valance/ bumper combo. Did you ever get my Pm? i sent ut like 2 weeks ago.tried to resend but your box is full

wildman ss · 08-21-2008, 12:02 PM

Quote: Originally Posted by jakethegriff

i really like that valance/ bumper combo. Did you ever get my Pm? i sent ut like 2 weeks ago.tried to resend but your box is full

nope, I just cleared out my box again so hopefully it will go through this time

I hate only being able to have 40 messages

J.Cakes · 08-21-2008, 12:04 PM

become a DM

wildman ss · 08-21-2008, 12:17 PM

Quote: Originally Posted by 00redsdime

become a DM

I think it would be worth it

once summer showdown is over I really want to get this think laid the **** out, cause its getting old being stuck an inch off the ground and barely tuckin tire

06-18-2008, 03:13 PM	#301
Fortunat72 Goin Up Age: 18 Join Date: Mar 2008 Posts: 246 Location: Northern NJ User is: OffLine	Re: [Project] Blazer Rezurection yea and i see lines look... and the pic quality got a little worse becuase of paint sorry
	[Reply w/Quote]

06-18-2008, 04:22 PM	#302
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection yeah thats one of the places it was keyed and I just sanded it down and painted over it, its been that way for months now
	[Reply w/Quote]

06-18-2008, 04:22 PM	#303
cpolaris502 SmartTrak FTW Age: 21 Join Date: Jul 2005 Posts: 16,616 Location: Rogers, MN User is: OffLine	Re: [Project] Blazer Rezurection i can see the key marks on the tailgate in one of the other pics too. i hope that never happens to me.
	[Reply w/Quote]

06-18-2008, 04:22 PM	#304
The Griff Jesus Palamino Join Date: May 2006 Posts: 18,487 Location: Uncle Nutsy's Clubhouse User is: OffLine	Re: [Project] Blazer Rezurection haha sorry to call you out on that man, haha but still looks good
	[Reply w/Quote]

06-18-2008, 11:44 PM	#305
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by jakethegriff haha sorry to call you out on that man, haha but still looks good its all good, its a piece and I know it, the only thing holding together is duct tape, zipties and spray paint
	[Reply w/Quote]

06-19-2008, 10:20 AM	#306
cpolaris502 SmartTrak FTW Age: 21 Join Date: Jul 2005 Posts: 16,616 Location: Rogers, MN User is: OffLine	Re: [Project] Blazer Rezurection i was going to ask how you attached the roll pan...
	[Reply w/Quote]

06-19-2008, 02:59 PM	#307
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by cpolaris502 i was going to ask how you attached the roll pan... actualy I splurged a little bit and bolted it to the step shavers and I parked next to a smart car today and I was actualy lower than it
	[Reply w/Quote]

06-22-2008, 12:35 PM	#308
blazerxtreme18 Registered User Age: 24 Join Date: Jun 2006 Posts: 1,875 Location: good ol'north jerz User is: OffLine	Re: [Project] Blazer Rezurection did you use the Monroe MA759MM air shocks???
	[Reply w/Quote]

06-23-2008, 11:53 AM	#309
blazed88 SMACK that ass Age: 29 Join Date: Nov 2004 Posts: 1,805 Location: Newnan, Ga User is: OffLine	Re: [Project] Blazer Rezurection nice blazer. glad to see another blazer in ga going down
	[Reply w/Quote]

06-23-2008, 12:15 PM	#310
cpolaris502 SmartTrak FTW Age: 21 Join Date: Jul 2005 Posts: 16,616 Location: Rogers, MN User is: OffLine	Re: [Project] Blazer Rezurection did you have a fun time reaching up there with the bolts? i can barely get one on the bottom of mine. compressors and charcoal can are in the way on each side.
	[Reply w/Quote]

06-25-2008, 05:41 PM	#311
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by blazerxtreme18 did you use the Monroe MA759MM air shocks??? actually I used the gabriel hijackers from autozone, they're cheaper and have a lifetime warranty and yeah that charcol canister was a pain in the ass
	[Reply w/Quote]

06-27-2008, 08:48 PM	#312
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection couple pics from scrapin the coast
	[Reply w/Quote]

06-28-2008, 01:39 AM	#313
J.Cakes The way of all flesh Age: 23 Join Date: Jan 2006 Posts: 10,731 Location: Hell User is: OffLine	Re: [Project] Blazer Rezurection those pics actually make your truck look low
	[Reply w/Quote]

06-28-2008, 07:26 AM	#314
4UH8Rs Blazer User Age: 20 Join Date: Feb 2008 Posts: 330 Location: User is: OffLine	Re: [Project] Blazer Rezurection i spot a little camber in back
	[Reply w/Quote]

06-28-2008, 11:59 AM	#315
cpolaris502 SmartTrak FTW Age: 21 Join Date: Jul 2005 Posts: 16,616 Location: Rogers, MN User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by 4UH8Rs i spot a little camber in back Because he had the driver side down and passenger side up.
	[Reply w/Quote]

06-28-2008, 02:43 PM	#316
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by cpolaris502 Because he had the driver side down and passenger side up. yeah its the body leaning not the wheel when I hit sides the rear tucks more than the front
	[Reply w/Quote]

06-28-2008, 04:24 PM	#317
hrspwr454 Registered User Age: 21 Join Date: Sep 2007 Posts: 969 Location: Bloomington Il. User is: OffLine	Re: [Project] Blazer Rezurection saw there was a few pics of your truck on cardomain in the scrapin the coast pics. http://www.cardomain.com/event/2008/06/21/STC?c=3
	[Reply w/Quote]

07-04-2008, 01:18 PM	#318
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection I'm sure some of you have heard the story by now how I drug through double walled 5/8" inch line the other day
	[Reply w/Quote]

07-04-2008, 01:24 PM	#319
J.Cakes The way of all flesh Age: 23 Join Date: Jan 2006 Posts: 10,731 Location: Hell User is: OffLine	Re: [Project] Blazer Rezurection how did you do that?
	[Reply w/Quote]

07-04-2008, 01:28 PM	#320
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by 00redsdime how did you do that? dragging, it wasn't even on it hard, just what you see in the pic
	[Reply w/Quote]

07-04-2008, 06:51 PM	#321
cpolaris502 SmartTrak FTW Age: 21 Join Date: Jul 2005 Posts: 16,616 Location: Rogers, MN User is: OffLine	Re: [Project] Blazer Rezurection where would we hear this story? go on...
	[Reply w/Quote]

07-04-2008, 10:53 PM	#322
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by cpolaris502 where would we hear this story? go on... Most of the GA guys have heard it all ready but me and Prime. were headed to a meet at the Varsity and he was taking pics as I was rolling down the high way, so I decided to drag a little bit, nothin hard. Still had like 40 psi in the bags so I wasn't layin on it then suddenly I hear a PSSSSSSHHHHHHHHHHHH. Then my tank drops to 0 and my bags go to 0 as well and now I'm really draggin and had to make a quick detour off the off ramp. After a while we managed to find out where the leak was coming from and plug the lines and all that. But now only my front driverside bag would air up and my air shocks would only hold air for like 5 seconds. We managed to get it back home by going a back way and going slow with the compressor on close to the whole time. As of now I know I dragged through some 5/8" line and my 3/16" airshock line and I come out today and my tank is empty so IDK right now but I'llln o more tommorow.
	[Reply w/Quote]

07-04-2008, 11:09 PM	#323
blazed00 crew cab sfbd commin soon Age: 22 Join Date: Sep 2006 Posts: 4,770 Location: Wilm, NC User is: OffLine	Re: [Project] Blazer Rezurection thats sucks, i blew a compressor line 4 hours from my house in Bum fuk before. sucks, good thing you could make it back tho
	[Reply w/Quote]

07-05-2008, 12:25 AM	#324
Prime. Buffa Beats Age: 20 Join Date: Nov 2005 Posts: 1,238 Location: Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection brent, the tank drained cuase of the plugs we did in the gauge line. mine used to do it all the time.
	[Reply w/Quote]

07-05-2008, 01:24 AM	#325
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by Prime. brent, the tank drained cuase of the plugs we did in the gauge line. mine used to do it all the time. you're probably right, I can't wait to get that piece of 5/8 off so I can see how ****ed it is Also can you send me the rest of the pictures
	[Reply w/Quote]

07-05-2008, 01:39 AM	#326
Prime. Buffa Beats Age: 20 Join Date: Nov 2005 Posts: 1,238 Location: Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection only got these other 2 before i realized something was wrong and threw the camera down. i didn't have the camera out when it was really dragging hard.
	[Reply w/Quote]

07-05-2008, 01:26 PM	#327
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection thats cool, I pulled the line today and found out that sparks didn't get to it, it blew out from the inside. The area around it was all bubbly. So I'm thinking the exhaust has been blowin on it for 6 months now and for some reason while I was draggin decided to blow out. I do however have a tiny hole in my airshock line from the sparks but that is easily fixed.
	[Reply w/Quote]

07-06-2008, 05:49 PM	#328
BudRacing Molon Labe Age: 23 Join Date: Aug 2004 Posts: 5,073 Location: Decatur, Ga User is: OffLine	Re: [Project] Blazer Rezurection Shroud that shit.
	[Reply w/Quote]

07-21-2008, 05:12 AM	#329
ZQ8 Blazer ZQ8 Blazer Age: 26 Join Date: Jul 2004 Posts: 9,363 Location: Western, Ky User is: OffLine	Re: [Project] Blazer Rezurection Other than spreading the side pieces out what else did you have to do to get the pan to fit? What brand is the pan? Does spreading them out mean you just adjusted the side pieces outward?
	[Reply w/Quote]

08-04-2008, 10:19 AM	#330
BudRacing Molon Labe Age: 23 Join Date: Aug 2004 Posts: 5,073 Location: Decatur, Ga User is: OffLine	Re: [Project] Blazer Rezurection Brent, Hurry up and bag your rear so I can buy your rear leafs.
	[Reply w/Quote]

08-05-2008, 12:29 AM	#331
hrspwr454 Registered User Age: 21 Join Date: Sep 2007 Posts: 969 Location: Bloomington Il. User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by BudRacing Brent, Hurry up and bag your rear so I can buy your rear leafs. i think he has the pre 98 leafs, so i dont think theyd work on your blazer.
	[Reply w/Quote]

08-05-2008, 09:57 AM	#332
BudRacing Molon Labe Age: 23 Join Date: Aug 2004 Posts: 5,073 Location: Decatur, Ga User is: OffLine	Re: [Project] Blazer Rezurection good call
	[Reply w/Quote]

08-05-2008, 11:24 AM	#333
Forklift Its that dam ADD! Age: 33 Join Date: Dec 2002 Posts: 3,585 Location: Vancouver, WA User is: OffLine	Re: [Project] Blazer Rezurection makes me wanna buy a 2nd gen!
	[Reply w/Quote]

08-05-2008, 01:03 PM	#334
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,244 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by hrspwr454 i think he has the pre 98 leafs, so i dont think theyd work on your blazer. damnit I was gonna trick him into buying them and on that note I have a set of 3" beltech lowering leafsprings that were used for about a month or two for sale
	[Reply w/Quote]

08-05-2008, 01:08 PM	#335
The Griff Jesus Palamino Join Date: May 2006 Posts: 18,487 Location: Uncle Nutsy's Clubhouse User is: OffLine	Re: [Project] Blazer Rezurection hey brent you should clear up you pm box
	[Reply w/Quote]