[Project] Blazer Rezurection

BlkBlzr01 · 08-13-2009, 03:24 PM

hey, forgot to tell you thanks for the pic. how much lift do you get from the air shocks and does it ride decent?

wildman ss · 08-13-2009, 04:20 PM

Quote: Originally Posted by BlkBlzr01

hey, forgot to tell you thanks for the pic. how much lift do you get from the air shocks and does it ride decent?

I love the way the back rides with about 40 psi in the shocks it rides smooth and not rough or bumpy at all

here is a pic when the shocks are new, after over a year of abuse I get less than half that lift but I don't care cause I don't need that much and the airshocks have a lifetime warranty so I'll swap em out soon enough

BlkBlzr01 · 08-13-2009, 04:31 PM

damn, more lift than i expected. that'd be perfect for me. if i do my front i dont plan to do the back right away.

Matt96Dime · 08-13-2009, 05:19 PM

sick blazer,great job on the bringing it back to life and it looks iLL on air..what year is it by the way jw?

wildman ss · 08-14-2009, 12:47 PM

its a 95

Matt96Dime · 08-14-2009, 12:49 PM

wildman ss · 08-21-2009, 04:07 PM

well the blazer is oficially off the streets for a while time to start tearing it apart in preparation for next spring/summer

I decided to paint the dash bezel a candy red it was going pretty good until it decided to fall of the stand and onto a pile of newspapers

the kinda good

and the bad

colbye32 · 08-22-2009, 01:23 AM

damn brent that would pissss me the **** off...

i remember the days of painted bezels, just got done painting mine, it fell off box i had it sitting up on. had to wait for it to dry and sand the hell out of it and start over.

cpolaris502 · 08-22-2009, 11:22 AM

My autoloc solenoid has been doing the same exact thing. Only the driver side one has given me problems in the year and a half ive had them but thats because it got stuck on for almost a minute onece. I just need to take them apart and clean them and greae them every once in a while though.

wildman ss · 09-15-2009, 11:56 PM

well I called suicidedoors today and in a week or two I should have
two link bars
frame mounts
and a bunch of fittings

the rear will be 1/4" valves with 3/8" line, nice and controlled. although anything will be better than the 1/4" valves with the 1/8" line, took a couple minutes to air out the back

Also I'll be doing the transmission triangle plate mod soon enough and i really want to dehump my lowers and cut up the fenders some but we'll have to wait and see about that

wildman ss · 10-02-2009, 03:49 PM

still waiting on parts from SD, called them today and found out that it won't be shipping until next week. Thats another weekend where I cant make any progress on the blazer.

Fast & Low · 10-02-2009, 08:58 PM

Quote: Originally Posted by wildman ss

still waiting on parts from SD, called them today and found out that it won't be shipping until next week. Thats another weekend where I cant make any progress on the blazer.

Damn man that sucks. you should come out and say hey to all freaks. we haven't seen you in a while.

wildman ss · 10-25-2009, 05:12 PM

got the parts in but the sent me the wrong brackets, the waiting game begins again...

in other news the blazer is going to be sold 2 link or not, check the clssifieds or mautofied

unclejames1 · 10-25-2009, 05:19 PM

why you sellin it?

hrspwr454 · 10-25-2009, 07:23 PM

What a crappy update!

wildman ss · 10-25-2009, 07:35 PM

can't afford it, got loans and insuarance to pay for..

BudRacing · 10-25-2009, 10:14 PM

Wait, why can't you afford to keep the blazer? This is like one of the least expensive vehicles to own.

XtremelyYellow · 10-31-2009, 02:09 PM

Wish I could buy it from ya

I'm in the process of saving up for another blazer, but it's gonna take me some time *sigh*

wildman ss · 11-01-2009, 07:11 PM

totally buy this one, the work is almost done

I've been working hard on the 2 link for the past 2 days, thats why there haven't been any updates cause I've been too busy working haha

it should be completed tommorow if all goes well

XtremelyYellow · 11-01-2009, 07:27 PM

I know... that's why it's soooo tempting. I'd have to paint it yellow though

wildman ss · 11-05-2009, 12:49 PM

that would make me a little sad

the 2 link is finally "done" I need some angled blocks to get the pinion right before I can actually start driving it around

pics soon

wildman ss · 11-06-2009, 03:21 PM

BudRacing · 11-06-2009, 08:38 PM

What was the reason you didn't leave the Zq8's on? I think they looked much better. And I'm not just saying that because they're the same wheels I have.

XtremelyYellow · 11-06-2009, 09:29 PM

I think he sold them.

***Wicked Mayhem*** · 11-06-2009, 11:22 PM

actually if you look in the picture, you see them on the sonoma

wildman ss · 11-07-2009, 01:01 PM

Quote: Originally Posted by Wicked Mayhem

actually if you look in the picture, you see them on the sonoma

true story, they look better on the sonoma than they do on the blazer

colbye32 · 11-08-2009, 01:24 PM

more pics of the 2 link??

wildman ss · 11-08-2009, 02:40 PM

Quote: Originally Posted by colbye32

more pics of the 2 link??

i'll upload more when I get back to school
it doesnt layout right now because I have to cut out some cross members and the pinion isnt even close to being right

colbye32 · 11-10-2009, 01:52 AM

Quote: Originally Posted by wildman ss

i'll upload more when I get back to school
it doesnt layout right now because I have to cut out some cross members and the pinion isnt even close to being right

so wait, you're telling me, with leaf springs this dude sat lower than it does currently???

what the hell mang, start cuttin that shit and lay it out hard.

and ps, dont sell it

wildman ss · 11-10-2009, 12:54 PM

it sits lower now, it "laid" on the leaf springs because they hung like 3 inches below the frame

XtremelyYellow · 11-15-2009, 07:22 PM

Where are the pictures? I'm bored

MNbdblazer · 11-15-2009, 11:02 PM

nice blaze it looks sic with those rims..

wildman ss · 01-14-2010, 02:01 AM

someone needs to hurry up and buy this piece

XtremelyYellow · 01-17-2010, 10:00 AM

Do you have pics of what you did with the rear setup?
I'd buy it but I can't touch your asking price

Not saying you are asking too much, just too much for me.
I'm about to buy a 2003 Yellow Blazer X in Ohio for $3200

XtremelyYellow · 01-21-2010, 12:37 PM

Ugh! Well, not buying that blazer. My brother looked at it and it had some rust issues

Any bites on your Blazer Brent?

wildman ss · 01-21-2010, 12:45 PM

yeah I'll get some pics up, its a 2link with bags on bar after the axle
its a little goofy and I've only seen one other setup like it but it works

and nothing yet just spam and people wanting to trade me their pos's

XtremelyYellow · 01-21-2010, 01:05 PM

Yeah, be careful with dealing on craigslist. I was trying to sell my radio and had my car broken into tuesday and the radio stolen by the guy that was claiming to buy it. My insurance won't cover it since it was not installed.

wildman ss · 03-02-2010, 01:38 AM

Blood drag is less than a week away!!!

and the blazer doesnt even run

I have to replace the spider injection thingy as its leking out the ass and wont maintain fuel pressure
to do list before the show
-finish dash bezel
-finish cutting crossmembers
-painting the rear setup
-getting the dents out of the cowl hood and maybe paint it
-clean the **** out of it, hasn't been cleaned in 6 months

oh and some how get tags and get legal to drive on the streets

XtremelyYellow · 03-02-2010, 09:32 PM

Get to work! I wanna see it!

wildman ss · 03-02-2010, 10:02 PM

we'll see, I'm still waiting on parts and i only have a couple days left

85' S-Dime · 03-03-2010, 01:06 AM

You've got way to much frame showing...lol

blazerxtreme18 · 03-03-2010, 04:30 PM

i need to see some updated pics of this thing...i wanna see pics of this 2 link too..hurry up with pics!

wildman ss · 03-03-2010, 10:28 PM

still waiting on the spider to get here
but I got my AVS actuators today and they will be installed shortly, I've been too busy working to get pictures but I'll see what I can do

Got Bags? · 03-08-2010, 03:35 AM

blazer looks good man

wildman ss · 03-08-2010, 03:41 PM

heres a pic to tide you guys over until I can get the rrst of them up

__CJ__ · 03-09-2010, 07:45 PM

Quote: Originally Posted by wildman ss

heres a pic to tide you guys over until I can get the rrst of them up

Ahh thought I recognized your truck from the forum! Pretty clean lol.

08-13-2009, 03:24 PM	#501
BlkBlzr01 i ain't your pal dickface Age: 24 Join Date: Jan 2007 Posts: 2,820 Location: 34.69N,-77.98W (Elev. 42ft) User is: OffLine	Re: [Project] Blazer Rezurection hey, forgot to tell you thanks for the pic. how much lift do you get from the air shocks and does it ride decent?
	[Reply w/Quote]

08-13-2009, 04:20 PM	#502
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by BlkBlzr01 hey, forgot to tell you thanks for the pic. how much lift do you get from the air shocks and does it ride decent? I love the way the back rides with about 40 psi in the shocks it rides smooth and not rough or bumpy at all here is a pic when the shocks are new, after over a year of abuse I get less than half that lift but I don't care cause I don't need that much and the airshocks have a lifetime warranty so I'll swap em out soon enough
	[Reply w/Quote]

08-13-2009, 04:31 PM	#503
BlkBlzr01 i ain't your pal dickface Age: 24 Join Date: Jan 2007 Posts: 2,820 Location: 34.69N,-77.98W (Elev. 42ft) User is: OffLine	Re: [Project] Blazer Rezurection damn, more lift than i expected. that'd be perfect for me. if i do my front i dont plan to do the back right away.
	[Reply w/Quote]

08-13-2009, 05:19 PM	#504
Matt96Dime Is ready for 2010 shows! Age: 24 Join Date: Nov 2008 Posts: 1,427 Location: speedway,Ind User is: OffLine	Re: [Project] Blazer Rezurection sick blazer,great job on the bringing it back to life and it looks iLL on air..what year is it by the way jw?
	[Reply w/Quote]

08-14-2009, 12:47 PM	#505
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection its a 95
	[Reply w/Quote]

08-14-2009, 12:49 PM	#506
Matt96Dime Is ready for 2010 shows! Age: 24 Join Date: Nov 2008 Posts: 1,427 Location: speedway,Ind User is: OffLine	Re: [Project] Blazer Rezurection okay
	[Reply w/Quote]

08-21-2009, 04:07 PM	#507
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection well the blazer is oficially off the streets for a while time to start tearing it apart in preparation for next spring/summer I decided to paint the dash bezel a candy red it was going pretty good until it decided to fall of the stand and onto a pile of newspapers the kinda good and the bad
	[Reply w/Quote]

08-22-2009, 01:23 AM	#508
colbye32 fuck potholes. Join Date: May 2007 Posts: 1,981 Location: Conyers Ga User is: OffLine	Re: [Project] Blazer Rezurection damn brent that would pissss me the **** off... i remember the days of painted bezels, just got done painting mine, it fell off box i had it sitting up on. had to wait for it to dry and sand the hell out of it and start over.
	[Reply w/Quote]

08-22-2009, 11:22 AM	#509
cpolaris502 SmartTrak FTW Age: 21 Join Date: Jul 2005 Posts: 16,521 Location: Rogers, MN User is: Online	Re: [Project] Blazer Rezurection My autoloc solenoid has been doing the same exact thing. Only the driver side one has given me problems in the year and a half ive had them but thats because it got stuck on for almost a minute onece. I just need to take them apart and clean them and greae them every once in a while though.
	[Reply w/Quote]

09-15-2009, 11:56 PM	#510
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection well I called suicidedoors today and in a week or two I should have two link bars frame mounts and a bunch of fittings the rear will be 1/4" valves with 3/8" line, nice and controlled. although anything will be better than the 1/4" valves with the 1/8" line, took a couple minutes to air out the back Also I'll be doing the transmission triangle plate mod soon enough and i really want to dehump my lowers and cut up the fenders some but we'll have to wait and see about that
	[Reply w/Quote]

10-02-2009, 03:49 PM	#511
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection still waiting on parts from SD, called them today and found out that it won't be shipping until next week. Thats another weekend where I cant make any progress on the blazer.
	[Reply w/Quote]

10-02-2009, 08:58 PM	#512
Fast & Low FAH Q Age: 28 Join Date: Nov 2004 Posts: 714 Location: Acworth, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by wildman ss still waiting on parts from SD, called them today and found out that it won't be shipping until next week. Thats another weekend where I cant make any progress on the blazer. Damn man that sucks. you should come out and say hey to all freaks. we haven't seen you in a while.
	[Reply w/Quote]

10-25-2009, 05:12 PM	#513
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection got the parts in but the sent me the wrong brackets, the waiting game begins again... in other news the blazer is going to be sold 2 link or not, check the clssifieds or mautofied
	[Reply w/Quote]

10-25-2009, 05:19 PM	#514
unclejames1 just another dime!!!!! Age: 24 Join Date: May 2007 Posts: 619 Location: Warsaw, Indiana User is: OffLine	Re: [Project] Blazer Rezurection why you sellin it?
	[Reply w/Quote]

10-25-2009, 07:23 PM	#515
hrspwr454 Registered User Age: 21 Join Date: Sep 2007 Posts: 953 Location: Bloomington Il. User is: OffLine	Re: [Project] Blazer Rezurection What a crappy update!
	[Reply w/Quote]

10-25-2009, 07:35 PM	#516
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection can't afford it, got loans and insuarance to pay for..
	[Reply w/Quote]

10-25-2009, 10:14 PM	#517
BudRacing Molon Labe Age: 23 Join Date: Aug 2004 Posts: 5,069 Location: Decatur, Ga User is: OffLine	Re: [Project] Blazer Rezurection Wait, why can't you afford to keep the blazer? This is like one of the least expensive vehicles to own.
	[Reply w/Quote]

10-31-2009, 02:09 PM	#518
XtremelyYellow I'm a GIRL! :) Age: 31 Join Date: Dec 2004 Posts: 1,317 Location: Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Wish I could buy it from ya I'm in the process of saving up for another blazer, but it's gonna take me some time sigh
	[Reply w/Quote]

11-01-2009, 07:11 PM	#519
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection totally buy this one, the work is almost done I've been working hard on the 2 link for the past 2 days, thats why there haven't been any updates cause I've been too busy working haha it should be completed tommorow if all goes well
	[Reply w/Quote]

11-01-2009, 07:27 PM	#520
XtremelyYellow I'm a GIRL! :) Age: 31 Join Date: Dec 2004 Posts: 1,317 Location: Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection I know... that's why it's soooo tempting. I'd have to paint it yellow though
	[Reply w/Quote]

11-05-2009, 12:49 PM	#521
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection that would make me a little sad the 2 link is finally "done" I need some angled blocks to get the pinion right before I can actually start driving it around pics soon
	[Reply w/Quote]

11-06-2009, 03:21 PM	#522
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection
	[Reply w/Quote]

11-06-2009, 08:38 PM	#523
BudRacing Molon Labe Age: 23 Join Date: Aug 2004 Posts: 5,069 Location: Decatur, Ga User is: OffLine	Re: [Project] Blazer Rezurection What was the reason you didn't leave the Zq8's on? I think they looked much better. And I'm not just saying that because they're the same wheels I have.
	[Reply w/Quote]

11-06-2009, 09:29 PM	#524
XtremelyYellow I'm a GIRL! :) Age: 31 Join Date: Dec 2004 Posts: 1,317 Location: Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection I think he sold them.
	[Reply w/Quote]

11-06-2009, 11:22 PM	#525
*Wicked Mayhem* _-KNUCKLE SANDWICH-_ Join Date: Nov 2002 Posts: 16,824 Location: :noitacoL User is: Online	Re: [Project] Blazer Rezurection actually if you look in the picture, you see them on the sonoma
	[Reply w/Quote]

11-07-2009, 01:01 PM	#526
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by Wicked Mayhem actually if you look in the picture, you see them on the sonoma true story, they look better on the sonoma than they do on the blazer
	[Reply w/Quote]

11-08-2009, 01:24 PM	#527
colbye32 fuck potholes. Join Date: May 2007 Posts: 1,981 Location: Conyers Ga User is: OffLine	Re: [Project] Blazer Rezurection more pics of the 2 link??
	[Reply w/Quote]

11-08-2009, 02:40 PM	#528
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by colbye32 more pics of the 2 link?? i'll upload more when I get back to school it doesnt layout right now because I have to cut out some cross members and the pinion isnt even close to being right
	[Reply w/Quote]

11-10-2009, 01:52 AM	#529
colbye32 fuck potholes. Join Date: May 2007 Posts: 1,981 Location: Conyers Ga User is: OffLine	Re: [Project] Blazer Rezurection Quote: Originally Posted by wildman ss i'll upload more when I get back to school it doesnt layout right now because I have to cut out some cross members and the pinion isnt even close to being right so wait, you're telling me, with leaf springs this dude sat lower than it does currently??? what the hell mang, start cuttin that shit and lay it out hard. and ps, dont sell it
	[Reply w/Quote]

11-10-2009, 12:54 PM	#530
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection it sits lower now, it "laid" on the leaf springs because they hung like 3 inches below the frame
	[Reply w/Quote]

11-15-2009, 07:22 PM	#531
XtremelyYellow I'm a GIRL! :) Age: 31 Join Date: Dec 2004 Posts: 1,317 Location: Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Where are the pictures? I'm bored
	[Reply w/Quote]

11-15-2009, 11:02 PM	#532
MNbdblazer headroom Age: 26 Join Date: Apr 2008 Posts: 268 Location: CITY OF HOPKINS User is: OffLine	Re: [Project] Blazer Rezurection nice blaze it looks sic with those rims..
	[Reply w/Quote]

01-14-2010, 02:01 AM	#533
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 6,208 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection someone needs to hurry up and buy this piece
	[Reply w/Quote]

01-17-2010, 10:00 AM	#534
XtremelyYellow I'm a GIRL! :) Age: 31 Join Date: Dec 2004 Posts: 1,317 Location: Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Do you have pics of what you did with the rear setup? I'd buy it but I can't touch your asking price Not saying you are asking too much, just too much for me. I'm about to buy a 2003 Yellow Blazer X in Ohio for $3200
	[Reply w/Quote]

01-21-2010, 12:37 PM	#535
XtremelyYellow I'm a GIRL! :) Age: 31 Join Date: Dec 2004 Posts: 1,317 Location: Lawrenceville, GA User is: OffLine	Re: [Project] Blazer Rezurection Ugh! Well, not buying that blazer. My brother looked at it and it had some rust issues Any bites on your Blazer Brent?
	[Reply w/Quote]