[Project]: 95 SS

Prime. · 08-27-2006, 06:25 PM

So, I've had this thing for a little while and finally got around to taking some pics. As it is now, it's sitting on a 4/5 drop, all belltech stuff. Got the bed off now, welded in a grant fab roll pan and the tailgate handle is being shaved. I'll try to update as much as I can with new stuff I've done. Ok, on with the pics.

As it sits now with the 4/5 drop and bed off.

Bed off, frame painted.

Frame again.

Needing a new bumper bad, gonna check the junk yard maybe tomorrow and see what they got.

Interior torn apart, threw the seat in there to drive it out of the garage.

Bed in primer and blocked down with 400

Another shot of the bed.

Plans:

Exterior:
- shaved 3rd brake light, antenna, hood squirters
- 98+ front bumper
- Painted Hot Rod Flatz Carnival Red Pearl
- Panited handles
- SS mirrors

Interior:
- Glassed 98+ Blazer console (HVAC controls and head unit molded in) i have the console now and have tweeded the arm rest, just waiting to glass it.
- Glassed dash bezel with 7" monitor molded in
- Kicker 10" Sub in ported box and Kicker amp (have now)
- Interior parts painted Jet Black with black tweed accents

wildman ss · 08-27-2006, 06:46 PM

dude where do you live in L-ville? cause thats where i live

that bed is lookin hot too

AiredupX · 08-27-2006, 08:27 PM

Looks good. I've been wondering what that carnival red flat paint looks like, can't wait to see it

Prime. · 08-28-2006, 05:54 PM

Small Update:

Got console stripped down and ready to start with the glass.

HVAC controls just mocked up to see how it will look.

Definately gonna need to fix that up when i glass it. But for not having to cut it, it fit pretty good.

Armrest covered in black tweed.

***sdime98*** · 08-28-2006, 06:01 PM

HVAC in the console...thats gonna be nice man....i'm definately stayin tuned into this one..

Prime. · 08-28-2006, 10:45 PM

Another update for tonight:

Got the mapholder covered in black tweed. Turned out pretty good I think.

Another shot, panels are kinda dirty. O well.

One more

Shot of the Kicker ported box and 10" sub.

Gonna try to get the top part of the panel covered tomorrow, pics will follow.

Prime. · 08-29-2006, 08:57 PM

Little update:
Got wires for the hvac controls extended to fit in the console. No pics because theres not a whole lot to see. Was pretty straight forward and I tested everything out and it works great. Now just gotta get some vacuum line and extend those. When its done and put back together, I'll have pictures.

HofinaterSS · 08-29-2006, 09:07 PM

thats a cool idea. Its upside down though..

Prime. · 08-29-2006, 09:11 PM

Quote: Originally Posted by HofinaterSS

thats a cool idea. Its upside down though..

Yeah, I'm not sure about that yet. I don't know if I wasnt to have it facing so I can read it from driving or how it is in the picture.

Prime. · 09-09-2006, 11:33 PM

Update:
Got some SS mirrors. Got one one of the visors covered and ran out of tweed but I got some more now so the headliner and other visor will be covered tomorrow.

Sorry fro the bad pics, the lighting in my garage sucks.

Prime. · 01-27-2007, 12:33 AM

Well since most of the pictures from here were lost in the server crash, I'll just post up some newer ones. Goes from oder to newest. The truck is no almost all in sealer primer. Hopefully will be able to finish up the primer and get the jambs in color this weekend.

DropNDestroy · 01-27-2007, 01:15 AM

Wow man, lookin good! Reminds me of my truck when I was runnin 20" Boss 301's Wouldn't lay out cause of the fresh drag blocks though

Your's looks good, what color you going with?

-Parker

SleepyTow · 01-29-2007, 09:54 PM

Whats the console outta? Truck looks sick!

toolow91 · 01-29-2007, 11:01 PM

how hard was it to do the visors u stich the seam back up urself... iwas gonna tweed mine and put bow ties in them but i dont no about stiching them ...

DCSHOECOUSA · 01-30-2007, 08:55 AM

Quote: Originally Posted by Prime.

Small Update:

Got console stripped down and ready to start with the glass.

HVAC controls just mocked up to see how it will look.

Definately gonna need to fix that up when i glass it. But for not having to cut it, it fit pretty good.

Armrest covered in black tweed.

hey man how did you get the tweed to wrap around the back curve of the console so well...im having troubles with mine

Prime. · 01-30-2007, 03:54 PM

A heat gun and some patience. Just keep working it. The the part of the console is smoothed now for the hvac controls and the coin holder is shaved. I'll try to get some pictures.

Prime. · 01-30-2007, 04:30 PM

Still needs some finish work but yeah. Still not sure what I want to do with the front part. Maybe some gauges or a monitor. THe truck is all sealed now. I'll bring it out for some pics when it's not freezing here.

jman · 01-30-2007, 05:27 PM

Quote: Originally Posted by Prime.

Still needs some finish work but yeah. Still not sure what I want to do with the front part. Maybe some gauges or a monitor. THe truck is all sealed now. I'll bring it out for some pics when it's not freezing here.

that looks really good. nice job

SSMUFF · 01-30-2007, 05:47 PM

Looks good!

HofinaterSS · 01-30-2007, 08:58 PM

i like this truck

Prime. · 01-30-2007, 09:15 PM

Thanks. I need to get some pics of it sealed. Those pics of it blocked look like ass. Maybe tomorrow.

wildman ss · 02-04-2007, 05:25 PM

Quote: Originally Posted by Prime.

Still needs some finish work but yeah. Still not sure what I want to do with the front part. Maybe some gauges or a monitor. THe truck is all sealed now. I'll bring it out for some pics when it's not freezing here.

yeah the console is lookin good, I would probably go ahead and and put some guages in it so whenver you get that thing on air it will already be done.

and word on that freezing part, me and my friend were putting in the poppers and it was like 20 something degrees

Prime. · 02-05-2007, 07:07 PM

draggin_frame_05 · 02-16-2007, 10:10 PM

Got bored... you had a really good side shot...
http://i42.photobucket.com/albums/e3...;20pics/13.jpg

Prime. · 02-16-2007, 10:14 PM

Haha. That will come in time. Anyways, here's some new pics for in here.

Prime. · 03-13-2007, 05:48 PM

Here's some new pics of it in paint. Hot Rod Flatz carnival red pearl. It has a lot of flake added to it but you really have to see it in person to tell. The paint is definitely a good product. Should be real durable and washed up pretty nice. Next up is probably some Silverado or Cobalt SS badges and then maybe some pinstriping on the hood and rear cab pillars. THen work starts back on the interior. Let me know what you guys think.

DroppedOnDuece210 · 03-13-2007, 07:17 PM

Does that stuff feel smooth to the touch like regular paint or is it kinda rough?
Looks good by the way, and i'm sure it looks alot better in person, great job.

Prime. · 03-13-2007, 07:56 PM

Yeah, it's pretty smooth. If all the flake wasn't added, it would be just as smooth as single stage paint.

kevdog · 03-13-2007, 11:45 PM

Looks good! Pretty good choice on the color, too bad you can't see the flake in the pics. I bet that it looks bad ass!

xloud9t5gmcsuvx · 03-14-2007, 11:14 AM

i like it. i like it alot.

jayska · 03-14-2007, 11:24 AM

Quote: Originally Posted by Prime.

Here's some new pics of it in paint. Hot Rod Flatz carnival red pearl. It has a lot of flake added to it but you really have to see it in person to tell. The paint is definitely a good product. Should be real durable and washed up pretty nice. Next up is probably some Silverado or Cobalt SS badges and then maybe some pinstriping on the hood and rear cab pillars. THen work starts back on the interior. Let me know what you guys think.

I cant wait to paint my truck Lookin great keep your old ss badges brother!!!

HofinaterSS · 03-14-2007, 11:29 AM

wow i love that look. Color is really nice too. wow

slideAdime · 03-20-2007, 05:31 PM

Quote: Originally Posted by Prime.

truck looks good. is it just me or does your drivers door seem a little off alignment?

Prime. · 03-20-2007, 09:13 PM

Quote: Originally Posted by slideAdime

truck looks good. is it just me or does your drivers door seem a little off alignment?

Yeah, I think it is off a little. It kinda sticks inside the jamb a little. It's not really noticeable though. Is there any way to fix it?

slideAdime · 03-21-2007, 06:33 PM

yea it can be adjusted. not sure how though. i know the striker is adjustable. it looks like it just needs to come out about a 1/4 of an inch or so. that should make the front of the door line up too. it wasnt ever hit was it?

02_Black_XBlazer · 03-21-2007, 06:41 PM

Nice lookin' project, Prime. Looks great.....

(subsribes to thread)

lx64 · 04-29-2007, 10:46 AM

looking good do you have any pics of in side

BudRacing · 05-17-2007, 04:29 PM

Quote: Originally Posted by jayska

I cant wait to paint my truck Lookin great keep your old ss badges brother!!!

I think the silvy badges would be big and goofy lookin. The cobalt badges may look a little better... but I much prefer the originals. Makes the truck seem more authentic rather than someone who may have just thrown some SS badges on a non B4U.

Prime. · 05-23-2007, 03:29 PM

I'm gonna update this thread with the new pictures and the start of my new interior work.

now onto the new interior work. A 6.5" Sony monitor will be molded into the dash bezel so I started on what I want in the glove box. PS2 is going inside the center console so I molded a controller into the inside of the glove box. Still has a lot of work left on it, mainly the edges needs cleaned up. Still opens and closes fine and everything clears. It will get painted same red as arm rest pieces as well as the bezel and maybe entire dash will be painted. Also new fiberglass door panels and sub box.

BudRacing · 05-23-2007, 05:52 PM

Dude, that controller holder is sick. I'm wondering about the vent opening though... maybe some sort of slotted metal material? polished like billet or painted to match the rest of it? Just throwin some ideas out there.

Prime. · 05-23-2007, 06:30 PM

Yeah the inside of the vent? I'll probably paint the inside to match or something.

BudRacing · 05-24-2007, 12:15 AM

I considered that also, but then realized it would show when the vent flaps are adjusted and angled n such. Unless you just wanna paint the whole vent front and back and have the red flake in the middle of black tweed.

Myst · 05-24-2007, 12:30 AM

haha ...that things awesome ...good work

Prime. · 05-24-2007, 09:06 PM

Got my new front end parts today. Sonoma hood and blazer composite grill. Now I just need some blazer headlights and the front end will be rockin again. Gonna shave the squirters on this hood and paint it hopefully soon. I like this hood so much better than the stock s10 hood and it gives me the hybrid front end. Sonoma hood, blazer grill, s10 bumper.

wildman ss · 05-24-2007, 09:10 PM

its lookin awesome man

I'd be a little aprehensive about setting the grill on the ground though, the plastic scratches like a mo

BudRacing · 05-25-2007, 12:31 AM

Are you plannin on painting that grill to match too? I love the way the front end looks now... hope it doesn't change too much.

Prime. · 05-25-2007, 12:42 AM

Grille will be chrome.

BudRacing · 05-25-2007, 04:57 PM

Awww. mannnn.

Prime. · 05-25-2007, 05:14 PM

Why? it will flow nice with the bumper and I don't really like the painted grill, especially with the blazer headlights.

wildman ss · 05-25-2007, 05:22 PM

Quote: Originally Posted by Prime.

Why? it will flow nice with the bumper and I don't really like the painted grill, especially with the blazer headlights.

all chrome fronts FTW

08-27-2006, 06:25 PM	#1
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	[Project]: 95 SS So, I've had this thing for a little while and finally got around to taking some pics. As it is now, it's sitting on a 4/5 drop, all belltech stuff. Got the bed off now, welded in a grant fab roll pan and the tailgate handle is being shaved. I'll try to update as much as I can with new stuff I've done. Ok, on with the pics. As it sits now with the 4/5 drop and bed off. Bed off, frame painted. Frame again. Needing a new bumper bad, gonna check the junk yard maybe tomorrow and see what they got. Interior torn apart, threw the seat in there to drive it out of the garage. Bed in primer and blocked down with 400 Another shot of the bed. Plans: Exterior: - shaved 3rd brake light, antenna, hood squirters - 98+ front bumper - Painted Hot Rod Flatz Carnival Red Pearl - Panited handles - SS mirrors Interior: - Glassed 98+ Blazer console (HVAC controls and head unit molded in) i have the console now and have tweeded the arm rest, just waiting to glass it. - Glassed dash bezel with 7" monitor molded in - Kicker 10" Sub in ported box and Kicker amp (have now) - Interior parts painted Jet Black with black tweed accents
	[Reply w/Quote]

08-27-2006, 06:46 PM	#2
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 5,993 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS dude where do you live in L-ville? cause thats where i live that bed is lookin hot too
	[Reply w/Quote]

08-27-2006, 08:27 PM	#3
AiredupX Registered User Age: 27 Join Date: Sep 2003 Posts: 150 Location: Latham, NY User is: OffLine	Re: [Project]: 95 SS Looks good. I've been wondering what that carnival red flat paint looks like, can't wait to see it
	[Reply w/Quote]

08-28-2006, 05:54 PM	#4
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Small Update: Got console stripped down and ready to start with the glass. HVAC controls just mocked up to see how it will look. Definately gonna need to fix that up when i glass it. But for not having to cut it, it fit pretty good. Armrest covered in black tweed.
	[Reply w/Quote]

08-28-2006, 06:01 PM	#5
*sdime98* slowly, but surely. Age: 24 Join Date: Feb 2003 Posts: 49,347 Location: Laurel Hill, NC User is: OffLine	Re: [Project]: 95 SS HVAC in the console...thats gonna be nice man....i'm definately stayin tuned into this one..
	[Reply w/Quote]

08-28-2006, 10:45 PM	#6
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Another update for tonight: Got the mapholder covered in black tweed. Turned out pretty good I think. Another shot, panels are kinda dirty. O well. One more Shot of the Kicker ported box and 10" sub. Gonna try to get the top part of the panel covered tomorrow, pics will follow.
	[Reply w/Quote]

08-29-2006, 08:57 PM	#7
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Little update: Got wires for the hvac controls extended to fit in the console. No pics because theres not a whole lot to see. Was pretty straight forward and I tested everything out and it works great. Now just gotta get some vacuum line and extend those. When its done and put back together, I'll have pictures.
	[Reply w/Quote]

08-29-2006, 09:07 PM	#8
HofinaterSS rusty bumper member Age: 23 Join Date: Jul 2003 Posts: 4,083 Location: north jersey User is: OffLine	Re: [Project]: 95 SS thats a cool idea. Its upside down though..
	[Reply w/Quote]

08-29-2006, 09:11 PM	#9
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Quote: Originally Posted by HofinaterSS thats a cool idea. Its upside down though.. Yeah, I'm not sure about that yet. I don't know if I wasnt to have it facing so I can read it from driving or how it is in the picture.
	[Reply w/Quote]

09-09-2006, 11:33 PM	#10
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Update: Got some SS mirrors. Got one one of the visors covered and ran out of tweed but I got some more now so the headliner and other visor will be covered tomorrow. Sorry fro the bad pics, the lighting in my garage sucks.
	[Reply w/Quote]

01-27-2007, 12:33 AM	#11
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Well since most of the pictures from here were lost in the server crash, I'll just post up some newer ones. Goes from oder to newest. The truck is no almost all in sealer primer. Hopefully will be able to finish up the primer and get the jambs in color this weekend.
	[Reply w/Quote]

01-27-2007, 01:15 AM	#12
DropNDestroy Gots me a 4x4 too! Age: 25 Join Date: Oct 2004 Posts: 3,530 Location: Birmingham, AL User is: OffLine	Re: [Project]: 95 SS Wow man, lookin good! Reminds me of my truck when I was runnin 20" Boss 301's Wouldn't lay out cause of the fresh drag blocks though Your's looks good, what color you going with? -Parker
	[Reply w/Quote]

01-29-2007, 09:54 PM	#13
SleepyTow Registered User Age: 20 Join Date: Sep 2005 Posts: 77 Location: Ontario, Canada User is: OffLine	Re: [Project]: 95 SS Whats the console outta? Truck looks sick!
	[Reply w/Quote]

01-29-2007, 11:01 PM	#14
toolow91 STUNTiN ON THEM GRANNiES. Age: 18 Join Date: Jan 2006 Posts: 403 Location: STATEN ISLAND NY User is: OffLine	Re: [Project]: 95 SS how hard was it to do the visors u stich the seam back up urself... iwas gonna tweed mine and put bow ties in them but i dont no about stiching them ...
	[Reply w/Quote]

01-30-2007, 08:55 AM	#15
DCSHOECOUSA Ford Ranger Lover Age: 24 Join Date: Aug 2005 Posts: 200 Location: Hamilton, Ontario User is: OffLine	Re: [Project]: 95 SS Quote: Originally Posted by Prime. Small Update: Got console stripped down and ready to start with the glass. HVAC controls just mocked up to see how it will look. Definately gonna need to fix that up when i glass it. But for not having to cut it, it fit pretty good. Armrest covered in black tweed. hey man how did you get the tweed to wrap around the back curve of the console so well...im having troubles with mine
	[Reply w/Quote]

01-30-2007, 03:54 PM	#16
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS A heat gun and some patience. Just keep working it. The the part of the console is smoothed now for the hvac controls and the coin holder is shaved. I'll try to get some pictures.
	[Reply w/Quote]

01-30-2007, 04:30 PM	#17
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Still needs some finish work but yeah. Still not sure what I want to do with the front part. Maybe some gauges or a monitor. THe truck is all sealed now. I'll bring it out for some pics when it's not freezing here.
	[Reply w/Quote]

01-30-2007, 05:27 PM	#18
jman Hardcore 1st Gen'r Age: 29 Join Date: Jul 2001 Posts: 2,839 Location: Austin, IN User is: OffLine	Re: [Project]: 95 SS Quote: Originally Posted by Prime. Still needs some finish work but yeah. Still not sure what I want to do with the front part. Maybe some gauges or a monitor. THe truck is all sealed now. I'll bring it out for some pics when it's not freezing here. that looks really good. nice job
	[Reply w/Quote]

01-30-2007, 05:47 PM	#19
SSMUFF Registered User Join Date: May 2002 Posts: 1,700 Location: User is: OffLine	Re: [Project]: 95 SS Looks good!
	[Reply w/Quote]

01-30-2007, 08:58 PM	#20
HofinaterSS rusty bumper member Age: 23 Join Date: Jul 2003 Posts: 4,083 Location: north jersey User is: OffLine	Re: [Project]: 95 SS i like this truck
	[Reply w/Quote]

01-30-2007, 09:15 PM	#21
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Thanks. I need to get some pics of it sealed. Those pics of it blocked look like ass. Maybe tomorrow. Last edited by Prime. : 01-30-2007 at 09:17 PM.
	[Reply w/Quote]

02-04-2007, 05:25 PM	#22
wildman ss This is doo doo baby! Age: 19 Join Date: Apr 2006 Posts: 5,993 Location: Marrietta/Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Quote: Originally Posted by Prime. Still needs some finish work but yeah. Still not sure what I want to do with the front part. Maybe some gauges or a monitor. THe truck is all sealed now. I'll bring it out for some pics when it's not freezing here. yeah the console is lookin good, I would probably go ahead and and put some guages in it so whenver you get that thing on air it will already be done. and word on that freezing part, me and my friend were putting in the poppers and it was like 20 something degrees
	[Reply w/Quote]

02-05-2007, 07:07 PM	#23
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS
	[Reply w/Quote]

02-16-2007, 10:10 PM	#24
draggin_frame_05 DEFINITE OBSESSIONS Age: 22 Join Date: Aug 2005 Posts: 273 Location: Garland, TX User is: OffLine	Re: [Project]: 95 SS Got bored... you had a really good side shot... http://i42.photobucket.com/albums/e3...;20pics/13.jpg Last edited by draggin_frame_05 : 02-16-2007 at 10:11 PM.
	[Reply w/Quote]

02-16-2007, 10:14 PM	#25
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Haha. That will come in time. Anyways, here's some new pics for in here.
	[Reply w/Quote]

03-13-2007, 05:48 PM	#26
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Here's some new pics of it in paint. Hot Rod Flatz carnival red pearl. It has a lot of flake added to it but you really have to see it in person to tell. The paint is definitely a good product. Should be real durable and washed up pretty nice. Next up is probably some Silverado or Cobalt SS badges and then maybe some pinstriping on the hood and rear cab pillars. THen work starts back on the interior. Let me know what you guys think.
	[Reply w/Quote]

03-13-2007, 07:17 PM	#27
DroppedOnDuece210 Registered User Age: 21 Join Date: Jan 2007 Posts: 1,050 Location: User is: OffLine	Re: [Project]: 95 SS Does that stuff feel smooth to the touch like regular paint or is it kinda rough? Looks good by the way, and i'm sure it looks alot better in person, great job.
	[Reply w/Quote]

03-13-2007, 07:56 PM	#28
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Yeah, it's pretty smooth. If all the flake wasn't added, it would be just as smooth as single stage paint.
	[Reply w/Quote]

03-13-2007, 11:45 PM	#29
kevdog bank owned Age: 26 Join Date: Aug 2004 Posts: 2,916 Location: Newark, OH User is: OffLine	Re: [Project]: 95 SS Looks good! Pretty good choice on the color, too bad you can't see the flake in the pics. I bet that it looks bad ass!
	[Reply w/Quote]

03-14-2007, 11:14 AM	#30
xloud9t5gmcsuvx Neighborhood Dragger Age: 22 Join Date: May 2005 Posts: 3,911 Location: Cleveland User is: OffLine	Re: [Project]: 95 SS i like it. i like it alot.
	[Reply w/Quote]

03-14-2007, 11:24 AM	#31
jayska REMEBER THE OLDSCHOOL Join Date: Mar 2006 Posts: 602 Location: Canada User is: OffLine	Re: [Project]: 95 SS Quote: Originally Posted by Prime. Here's some new pics of it in paint. Hot Rod Flatz carnival red pearl. It has a lot of flake added to it but you really have to see it in person to tell. The paint is definitely a good product. Should be real durable and washed up pretty nice. Next up is probably some Silverado or Cobalt SS badges and then maybe some pinstriping on the hood and rear cab pillars. THen work starts back on the interior. Let me know what you guys think. I cant wait to paint my truck Lookin great keep your old ss badges brother!!!
	[Reply w/Quote]

03-14-2007, 11:29 AM	#32
HofinaterSS rusty bumper member Age: 23 Join Date: Jul 2003 Posts: 4,083 Location: north jersey User is: OffLine	Re: [Project]: 95 SS wow i love that look. Color is really nice too. wow
	[Reply w/Quote]

03-20-2007, 05:31 PM	#33
slideAdime insane asphalt ballet Age: 23 Join Date: May 2005 Posts: 1,026 Location: User is: OffLine	Re: [Project]: 95 SS Quote: Originally Posted by Prime. truck looks good. is it just me or does your drivers door seem a little off alignment?
	[Reply w/Quote]

03-20-2007, 09:13 PM	#34
Prime. Buffa Beats Age: 19 Join Date: Nov 2005 Posts: 1,236 Location: Lawrenceville, GA User is: OffLine	Re: [Project]: 95 SS Quote: Originally Posted by slideAdime truck looks good. is it just me or does your drivers door seem a little off alignment? Yeah, I think it is off a little. It kinda sticks inside the jamb a little. It's not really noticeable though. Is there any way to fix it?
	[Reply w/Quote]

03-21-2007, 06:33 PM	#35
slideAdime insane asphalt ballet Age: 23 Join Date: May 2005 Posts: 1,026 Location: User is: OffLine	Re: [Project]: 95 SS yea it can be adjusted. not sure how though. i know the striker is adjustable. it looks like it just needs to come out about a 1/4 of an inch or so. that should make the front of the door line up too. it wasnt ever hit was it?
	[Reply w/Quote]