Project: 2003 zq8 zebra.

TRPLS10 · 06-14-2012, 12:12 AM

omg .. i was bummed when i saw you bought those.. JERK haha

blake293209 · 06-14-2012, 12:46 AM

lol, i won't have them long at all. They might not ever make it on the Zebra just for respect reason's i have for that truck. haha

blake293209 · 06-15-2012, 02:47 AM

Selling the new ugly black wheels tomorrow possibly and probably selling my boss 304's soon.
Throw out some suggestions on new wheels. Really wanting to stay with 20" wheels.

so far i like
Showwheels (@ JDWheels)
Ridlers
Boss 335 in silver
American Racing Daytona's (black with polished lip)
KMC Nova machined

I'm looking at some Billet specialties daggers locally. I sent the guy an email a while back and if he still has them in a few days i might go check them out. He said they're 4" backspacing. 20x8.5 all the way around. Wouldn't that be about 0 offset?

GET_LOW · 06-15-2012, 09:51 AM

Quote: Originally Posted by blake293209

Selling the new ugly black wheels tomorrow possibly and probably selling my boss 304's soon.
Throw out some suggestions on new wheels. Really wanting to stay with 20" wheels.

so far i like
Showwheels (@ JDWheels)
Ridlers
Boss 335 in silver
American Racing Daytona's (black with polished lip)
KMC Nova machined

I'm looking at some Billet specialties daggers locally. I sent the guy an email a while back and if he still has them in a few days i might go check them out. He said they're 4" backspacing. 20x8.5 all the way around. Wouldn't that be about 0 offset?

For offset, those billets would be a negative offset of 0.250". I'd have him double check that measurement. Either they are not 8.5 wide or he measured the backspacing wrong. If those measurements are correct, then you might run into fender rubbing issues.

Im not really sure what sort of overall look you are going for. But I know american racing has some new wheels out called "blvd" that look nice.

blake293209 · 06-16-2012, 01:03 AM

Quote: Originally Posted by GET_LOW

For offset, those billets would be a negative offset of 0.250". I'd have him double check that measurement. Either they are not 8.5 wide or he measured the backspacing wrong. If those measurements are correct, then you might run into fender rubbing issues.

Im not really sure what sort of overall look you are going for. But I know american racing has some new wheels out called "blvd" that look nice.

The guy sold the billets. Oh well. didn't really like them 100% honestly. Not really wanting billets on a daily. Those BLVD wheels look good, wish they had more color's though. grey with polished lip, etc.

Looking at some 20" iroc wheels for cheap. Going to check them out tomorrow (they're out of state)

I sold the black wheels today, yay. Also got a cowl hood today (goodmark Gen 2).

GET_LOW · 06-16-2012, 01:33 AM

I'm not sure if you have checked out kmc wheels recently but they have a couple new styles that I like. Kmc sync's are similar to novas in design.

blake293209 · 06-16-2012, 01:51 AM

The wheel itself looks good. I'm not really a fan of the black and silver or brushed finish, unless the lip is brushed.

wildman ss · 06-16-2012, 02:54 AM

irocs look like haggard asshole to me imo

should get these

TRPLS10 · 06-16-2012, 12:09 PM

ive always liked these

http://www.socalcustoms.com/Shows/20...erBash_107.htm

blake293209 · 06-16-2012, 01:03 PM

Picked up the irocs this morning in Chattanooga. Gonna run them for now.

PSYKO_Inc · 06-16-2012, 04:10 PM

Quote: Originally Posted by TRPLS10

ive always liked these

http://www.socalcustoms.com/Shows/20...erBash_107.htm

Those wheels are pretty much at the top of my list right now...

And Blake, you know you can't mention buying wheels on here and not post pics

blake293209 · 06-16-2012, 09:15 PM

Quote: Originally Posted by PSYKO_Inc

Those wheels are pretty much at the top of my list right now...

And Blake, you know you can't mention buying wheels on here and not post pics

Lol, yeah i know. I had to put them on the truck and check them out first. Those wheels in the link above look good. It's a typical look but who cares, Iroc wheels are typical too. And here are some pics.

TRPLS10 · 06-17-2012, 11:49 AM

sweet man. always liked those

blake293209 · 06-17-2012, 12:04 PM

Thanks. Yeah i have too. I was wanting to check out the machined and black 20" irocs but the chrome ones look good too.

Boss wheels were sold this morning so more $$ for the zebra.

90blueS10 · 06-18-2012, 05:40 AM

New?

blake293209 · 06-18-2012, 01:01 PM

Quote: Originally Posted by 90blueS10

New?

Pretty much. Bought them from a guy that had them on a street legal buggy.

blake293209 · 06-20-2012, 08:24 PM

Well I bought more stuff for the truck today, Should be here soon enough. One is new Falken tires, the other is.. idk. can't tell. haha.

Went out side to mess with the truck for a couple min, wanted to see if I could figure out a quick and easy way (yeah right) to mount this gay radiator in the core support, but I kept running into the same problem of it not wanting to fit without hitting somewhere. Usually the drivers side top area hits, and if I cut that it'll look pretty ugly with a random hole there. Another issue is I don't really know of a good way to mount it. I know radiators are kinda fragile so I don't want some unreliable setup that might land me putting another radiator in on the side of the road..

What all did you cut if you're running a 4.3 radiator bodied? I'm gonna have to get this mounted up soon enough, been putting it off long enough and i really don't want to have to cut more of the core support to make it look ugly on top (besides the radiator cap cut area) Do people usually cut the bottom where the oem feet used to be? i cut the feet off of mine to make it go in.

littledevil4802 · 06-20-2012, 08:49 PM

wheels look good.

blake293209 · 06-20-2012, 09:10 PM

Quote: Originally Posted by littledevil4802

wheels look good.

Thanks. i like them too

GET_LOW · 06-20-2012, 09:36 PM

Wheels look nice but they really aren't my personal preference.

On the radiator, ya gotta cut to fit man. Did you drill holes for the mounting feet to drop into? I know that should lower it a good inch.

Post some pics!

blake293209 · 06-26-2012, 06:44 PM

Pics of new stuff

bought 4, just took a picture of the two put together.

TRPLS10 · 06-26-2012, 07:20 PM

nice goodies

blake293209 · 06-26-2012, 07:42 PM

Quote: Originally Posted by TRPLS10

nice goodies

thanks. I gotta get going on it again and get it drive able soonish! lol

layinbody31 · 06-27-2012, 09:50 AM

Ugh... so jealous of the VU4! Where did you get it from?

blake293209 · 06-28-2012, 06:36 PM

Quote: Originally Posted by layinbody31

Ugh... so jealous of the VU4! Where did you get it from?

Lol, its nice.

And I ordered through Jordan (GET_LOW)

layinbody31 · 06-29-2012, 02:06 PM

Quote: Originally Posted by blake293209

Lol, its nice.

And I ordered through Jordan (GET_LOW)

Yeah I know he did mention at one point that he got a killer discount through LowRiderDepot (I think?)

You mind divulging how much it ran you through him? It's something that's on my "must buy at some point" list so I'm curious how much I need to save

You can PM me if you don't want to make it public

TRPLS10 · 06-29-2012, 02:52 PM

just pm jordan haha.

layinbody31 · 06-29-2012, 03:01 PM

Quote: Originally Posted by TRPLS10

just pm jordan haha.

I already have a much more urgent PM out to Jordan that I have yet to get a response on...

blake293209 · 07-04-2012, 06:34 PM

Probably would be best off to just PM him.

I thought I had a good design going with the clutch pedal, doesn't seem like I'll get enough travel out of that so I might be designing another one. If anyone has pics of what they did to the clutch pedal to clear the tub could you post them up?

I might ride to pull a part tomorrow to see if there are any 5 speed trucks there, and just get a new pedal, start from scratch.. etc.

thanks, Blake

90blueS10 · 07-12-2012, 06:29 AM

Fgt

TRPLS10 · 07-12-2012, 04:38 PM

ryan jelly.

90blueS10 · 07-13-2012, 05:47 AM

The best kind of jelly

Tuckin15's · 07-14-2012, 11:42 AM

Bump for boobies

blake293209 · 07-14-2012, 01:12 PM

lol

I'm extending a couple wires so i can mount the fuse box and ecm inside the cab. hopefully going to take it to southeast showdown even if it's still a project.

GET_LOW · 07-14-2012, 04:02 PM

Need picture updates! I even updated my own!

blake293209 · 07-14-2012, 10:52 PM

Quote: Originally Posted by GET_LOW

Need picture updates! I even updated my own!

Yeah i need to take some pics, probably will snap some once i get the wiring buttoned up and ecm, fuse box mounted up.

blake293209 · 07-22-2012, 12:40 PM

Got my seat back about a week ago or so, just forgot to bump the thread for pics. Red side pieces are gone, replaced with black ones.

90blueS10 · 07-22-2012, 02:56 PM

Thats sexy, what did it run you

blake293209 · 07-23-2012, 12:34 AM

Quote: Originally Posted by 90blueS10

Thats sexy, what did it run you

Put a rear seal on an engine in a Honda accord in trade for the work. He claims it would've been around 300-350.

colbye32 · 07-23-2012, 12:47 AM

Quote: Originally Posted by blake293209

Put a rear seal on an engine in a Honda accord in trade for the work. He claims it would've been around 300-350.

haha, guess you don't recall him saying anywhere from 350-450 if i wanted lines/design.

Drunk ass guy.

90blueS10 · 07-23-2012, 01:05 AM

Send me my shirt.

blake293209 · 07-23-2012, 01:40 AM

Quote: Originally Posted by colbye32

haha, guess you don't recall him saying anywhere from 350-450 if i wanted lines/design.

Drunk ass guy.

Damn, don't really remember the 450 parts. Oh well. Definitely not worth 450 though.

And Ryan i still have your shirt, folded up and all. lol.

blake293209 · 07-23-2012, 02:34 AM

I failed and posted that 2 times. lol

90blueS10 · 07-23-2012, 02:37 AM

fold it my way. along with those caps

TRPLS10 · 07-23-2012, 04:56 PM

nice bench. i want one

blake293209 · 07-23-2012, 08:40 PM

Quote: Originally Posted by 90blueS10

fold it my way. along with those caps

You need those red pieces? and yeah i need to ship you your shirt but i have't found a shipping company that does it for free yet honestly.

Quote: Originally Posted by TRPLS10

nice bench. i want one

thanks man, i like it too, just hope it holds up and doesn't stain from wear.

blake293209 · 07-24-2012, 12:49 AM

lil update

90blueS10 · 07-24-2012, 12:50 AM

nice mustang.

colbye32 · 07-24-2012, 01:09 AM

I spy brazil tails.

I see what we have here.

blake293209 · 07-24-2012, 01:44 AM

Yessa, gonna be confusing people with that amber turn signal. lol.

06-14-2012, 12:12 AM	#301
TRPLS10 Registered User Age: 21 Join Date: Jul 2008 Posts: 3,694 Location: Wichita Ks User is: OffLine	Re: Project: 2003 zq8 zebra. omg .. i was bummed when i saw you bought those.. JERK haha
	[Reply w/Quote]

06-14-2012, 12:46 AM	#302
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. lol, i won't have them long at all. They might not ever make it on the Zebra just for respect reason's i have for that truck. haha
	[Reply w/Quote]

06-15-2012, 02:47 AM	#303
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Selling the new ugly black wheels tomorrow possibly and probably selling my boss 304's soon. Throw out some suggestions on new wheels. Really wanting to stay with 20" wheels. so far i like Showwheels (@ JDWheels) Ridlers Boss 335 in silver American Racing Daytona's (black with polished lip) KMC Nova machined I'm looking at some Billet specialties daggers locally. I sent the guy an email a while back and if he still has them in a few days i might go check them out. He said they're 4" backspacing. 20x8.5 all the way around. Wouldn't that be about 0 offset?
	[Reply w/Quote]

06-15-2012, 09:51 AM	#304
GET_LOW DELIBERATE DESIGNS Age: 21 Join Date: Mar 2008 Posts: 7,796 Location: GH, MI User is: OffLine	Re: Project: 2003 zq8 zebra. Quote: Originally Posted by blake293209 Selling the new ugly black wheels tomorrow possibly and probably selling my boss 304's soon. Throw out some suggestions on new wheels. Really wanting to stay with 20" wheels. so far i like Showwheels (@ JDWheels) Ridlers Boss 335 in silver American Racing Daytona's (black with polished lip) KMC Nova machined I'm looking at some Billet specialties daggers locally. I sent the guy an email a while back and if he still has them in a few days i might go check them out. He said they're 4" backspacing. 20x8.5 all the way around. Wouldn't that be about 0 offset? For offset, those billets would be a negative offset of 0.250". I'd have him double check that measurement. Either they are not 8.5 wide or he measured the backspacing wrong. If those measurements are correct, then you might run into fender rubbing issues. Im not really sure what sort of overall look you are going for. But I know american racing has some new wheels out called "blvd" that look nice.
	[Reply w/Quote]

06-16-2012, 01:03 AM	#305
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Quote: Originally Posted by GET_LOW For offset, those billets would be a negative offset of 0.250". I'd have him double check that measurement. Either they are not 8.5 wide or he measured the backspacing wrong. If those measurements are correct, then you might run into fender rubbing issues. Im not really sure what sort of overall look you are going for. But I know american racing has some new wheels out called "blvd" that look nice. The guy sold the billets. Oh well. didn't really like them 100% honestly. Not really wanting billets on a daily. Those BLVD wheels look good, wish they had more color's though. grey with polished lip, etc. Looking at some 20" iroc wheels for cheap. Going to check them out tomorrow (they're out of state) I sold the black wheels today, yay. Also got a cowl hood today (goodmark Gen 2).
	[Reply w/Quote]

06-16-2012, 01:33 AM	#306
GET_LOW DELIBERATE DESIGNS Age: 21 Join Date: Mar 2008 Posts: 7,796 Location: GH, MI User is: OffLine	Re: Project: 2003 zq8 zebra. I'm not sure if you have checked out kmc wheels recently but they have a couple new styles that I like. Kmc sync's are similar to novas in design.
	[Reply w/Quote]

06-16-2012, 01:51 AM	#307
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. The wheel itself looks good. I'm not really a fan of the black and silver or brushed finish, unless the lip is brushed.
	[Reply w/Quote]

06-16-2012, 02:54 AM	#308
wildman ss This is doo doo baby! Age: 23 Join Date: Apr 2006 Posts: 10,338 Location: Lawrenceville, GA User is: OffLine	Re: Project: 2003 zq8 zebra. irocs look like haggard asshole to me imo should get these
	[Reply w/Quote]

06-16-2012, 12:09 PM	#309
TRPLS10 Registered User Age: 21 Join Date: Jul 2008 Posts: 3,694 Location: Wichita Ks User is: OffLine	Re: Project: 2003 zq8 zebra. ive always liked these http://www.socalcustoms.com/Shows/20...erBash_107.htm
	[Reply w/Quote]

06-16-2012, 01:03 PM	#310
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Picked up the irocs this morning in Chattanooga. Gonna run them for now.
	[Reply w/Quote]

06-16-2012, 04:10 PM	#311
PSYKO_Inc ** Yeah. Age: 30 Join Date: Apr 2005 Posts: 9,417 Location: Fairfield, CA User is: Online**	Re: Project: 2003 zq8 zebra. Quote: Originally Posted by TRPLS10 ive always liked these http://www.socalcustoms.com/Shows/20...erBash_107.htm Those wheels are pretty much at the top of my list right now... And Blake, you know you can't mention buying wheels on here and not post pics
	[Reply w/Quote]

06-16-2012, 09:15 PM	#312
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Quote: Originally Posted by PSYKO_Inc Those wheels are pretty much at the top of my list right now... And Blake, you know you can't mention buying wheels on here and not post pics Lol, yeah i know. I had to put them on the truck and check them out first. Those wheels in the link above look good. It's a typical look but who cares, Iroc wheels are typical too. And here are some pics.
	[Reply w/Quote]

06-17-2012, 11:49 AM	#313
TRPLS10 Registered User Age: 21 Join Date: Jul 2008 Posts: 3,694 Location: Wichita Ks User is: OffLine	Re: Project: 2003 zq8 zebra. sweet man. always liked those
	[Reply w/Quote]

06-17-2012, 12:04 PM	#314
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Thanks. Yeah i have too. I was wanting to check out the machined and black 20" irocs but the chrome ones look good too. Boss wheels were sold this morning so more $$ for the zebra.
	[Reply w/Quote]

06-18-2012, 05:40 AM	#315
90blueS10 No longer a pizza tech. Age: 21 Join Date: Sep 2007 Posts: 12,001 Location: Topeka User is: OffLine	New?
	[Reply w/Quote]

06-18-2012, 01:01 PM	#316
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Quote: Originally Posted by 90blueS10 New? Pretty much. Bought them from a guy that had them on a street legal buggy.
	[Reply w/Quote]

06-20-2012, 08:24 PM	#317
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Well I bought more stuff for the truck today, Should be here soon enough. One is new Falken tires, the other is.. idk. can't tell. haha. Went out side to mess with the truck for a couple min, wanted to see if I could figure out a quick and easy way (yeah right) to mount this gay radiator in the core support, but I kept running into the same problem of it not wanting to fit without hitting somewhere. Usually the drivers side top area hits, and if I cut that it'll look pretty ugly with a random hole there. Another issue is I don't really know of a good way to mount it. I know radiators are kinda fragile so I don't want some unreliable setup that might land me putting another radiator in on the side of the road.. What all did you cut if you're running a 4.3 radiator bodied? I'm gonna have to get this mounted up soon enough, been putting it off long enough and i really don't want to have to cut more of the core support to make it look ugly on top (besides the radiator cap cut area) Do people usually cut the bottom where the oem feet used to be? i cut the feet off of mine to make it go in.
	[Reply w/Quote]

06-20-2012, 08:49 PM	#318
littledevil4802 Registered User Age: 25 Join Date: Nov 2007 Posts: 2,419 Location: Warren, MI User is: OffLine	Re: Project: 2003 zq8 zebra. wheels look good.
	[Reply w/Quote]

06-20-2012, 09:10 PM	#319
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Quote: Originally Posted by littledevil4802 wheels look good. Thanks. i like them too
	[Reply w/Quote]

06-20-2012, 09:36 PM	#320
GET_LOW DELIBERATE DESIGNS Age: 21 Join Date: Mar 2008 Posts: 7,796 Location: GH, MI User is: OffLine	Re: Project: 2003 zq8 zebra. Wheels look nice but they really aren't my personal preference. On the radiator, ya gotta cut to fit man. Did you drill holes for the mounting feet to drop into? I know that should lower it a good inch. Post some pics!
	[Reply w/Quote]

06-26-2012, 06:44 PM	#321
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Pics of new stuff bought 4, just took a picture of the two put together.
	[Reply w/Quote]

06-26-2012, 07:20 PM	#322
TRPLS10 Registered User Age: 21 Join Date: Jul 2008 Posts: 3,694 Location: Wichita Ks User is: OffLine	Re: Project: 2003 zq8 zebra. nice goodies
	[Reply w/Quote]

06-26-2012, 07:42 PM	#323
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Quote: Originally Posted by TRPLS10 nice goodies thanks. I gotta get going on it again and get it drive able soonish! lol
	[Reply w/Quote]

06-27-2012, 09:50 AM	#324
layinbody31 Lifted 2wd & Bodied 4x4 Age: 27 Join Date: Jul 2004 Posts: 13,302 Location: Cedar Lake, IN User is: OffLine	Re: Project: 2003 zq8 zebra. Ugh... so jealous of the VU4! Where did you get it from?
	[Reply w/Quote]

06-28-2012, 06:36 PM	#325
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Quote: Originally Posted by layinbody31 Ugh... so jealous of the VU4! Where did you get it from? Lol, its nice. And I ordered through Jordan (GET_LOW)
	[Reply w/Quote]

06-29-2012, 02:06 PM	#326
layinbody31 Lifted 2wd & Bodied 4x4 Age: 27 Join Date: Jul 2004 Posts: 13,302 Location: Cedar Lake, IN User is: OffLine	Re: Project: 2003 zq8 zebra. Quote: Originally Posted by blake293209 Lol, its nice. And I ordered through Jordan (GET_LOW) Yeah I know he did mention at one point that he got a killer discount through LowRiderDepot (I think?) You mind divulging how much it ran you through him? It's something that's on my "must buy at some point" list so I'm curious how much I need to save You can PM me if you don't want to make it public
	[Reply w/Quote]

06-29-2012, 02:52 PM	#327
TRPLS10 Registered User Age: 21 Join Date: Jul 2008 Posts: 3,694 Location: Wichita Ks User is: OffLine	Re: Project: 2003 zq8 zebra. just pm jordan haha.
	[Reply w/Quote]

06-29-2012, 03:01 PM	#328
layinbody31 Lifted 2wd & Bodied 4x4 Age: 27 Join Date: Jul 2004 Posts: 13,302 Location: Cedar Lake, IN User is: OffLine	Re: Project: 2003 zq8 zebra. Quote: Originally Posted by TRPLS10 just pm jordan haha. I already have a much more urgent PM out to Jordan that I have yet to get a response on...
	[Reply w/Quote]

07-04-2012, 06:34 PM	#329
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. Probably would be best off to just PM him. I thought I had a good design going with the clutch pedal, doesn't seem like I'll get enough travel out of that so I might be designing another one. If anyone has pics of what they did to the clutch pedal to clear the tub could you post them up? I might ride to pull a part tomorrow to see if there are any 5 speed trucks there, and just get a new pedal, start from scratch.. etc. thanks, Blake
	[Reply w/Quote]

07-12-2012, 06:29 AM	#330
90blueS10 No longer a pizza tech. Age: 21 Join Date: Sep 2007 Posts: 12,001 Location: Topeka User is: OffLine	Fgt
	[Reply w/Quote]

07-12-2012, 04:38 PM	#331
TRPLS10 Registered User Age: 21 Join Date: Jul 2008 Posts: 3,694 Location: Wichita Ks User is: OffLine	Re: Project: 2003 zq8 zebra. ryan jelly.
	[Reply w/Quote]

07-13-2012, 05:47 AM	#332
90blueS10 No longer a pizza tech. Age: 21 Join Date: Sep 2007 Posts: 12,001 Location: Topeka User is: OffLine	The best kind of jelly
	[Reply w/Quote]

07-14-2012, 11:42 AM	#333
Tuckin15's 5.3 Lover Age: 21 Join Date: Aug 2008 Posts: 6,234 Location: The Greatest town ever. User is: OffLine	Re: Project: 2003 zq8 zebra. Bump for boobies
	[Reply w/Quote]

07-14-2012, 01:12 PM	#334
blake293209 I own <several ties> Age: 21 Join Date: Jul 2007 Posts: 2,631 Location: Conyers, GA User is: OffLine	Re: Project: 2003 zq8 zebra. lol I'm extending a couple wires so i can mount the fuse box and ecm inside the cab. hopefully going to take it to southeast showdown even if it's still a project.
	[Reply w/Quote]

07-14-2012, 04:02 PM	#335
GET_LOW DELIBERATE DESIGNS Age: 21 Join Date: Mar 2008 Posts: 7,796 Location: GH, MI User is: OffLine	Re: Project: 2003 zq8 zebra. Need picture updates! I even updated my own!
	[Reply w/Quote]