Mostizzles dime - Page 42 - S-10 Forum
S-10 Forum is the resource on GM S-series trucks, Suspension, engine information, Body Modifications, painting tutorials.  Modifications to suit every need, budget and whim

Mostizzles dime

Go Back   S-10 Forum > Member Forums > Member Projects
New User? Register Forgot Password


 
LinkBack Thread Tools
Old 04-27-2012, 10:03 PM   #2051
The WaterBoy
 
nomacane07's Avatar
 
Age: 26
Join Date: Feb 2011
Posts: 2,325
Location: The Burg, Indiana
User is: OffLine
Re: Mostizzles dime

Mo better
Old 04-27-2012, 10:05 PM   #2052
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Quote: Originally Posted by Zeeke98
MUCH better. Time for new carpet and floor mats!
It's on the list. I really want some new dark gray carpet and some Lloyds mats.
Quote: Originally Posted by nomacane07
Mo better
Word.
Old 04-27-2012, 10:07 PM   #2053
Registered User
 
Zeeke98's Avatar
 
Age: 40
Join Date: Aug 2003
Posts: 10,370
Location: Michigan
User is: OffLine
Re: Mostizzles dime

I got Lloyds mats...I just need new dark gray carpet as well. Gotta start selling off some old parts I have and put that towards carpet.
Old 04-27-2012, 10:20 PM   #2054
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

You happy with those mats? I'll get around to all that easy stuff. The next item of bidness is the steering gear and Jeep shaft.
Old 04-27-2012, 10:27 PM   #2055
Registered User
 
Zeeke98's Avatar
 
Age: 40
Join Date: Aug 2003
Posts: 10,370
Location: Michigan
User is: OffLine
Re: Mostizzles dime

Yeah, I've had them in a few vehicles now and they hold up great. I lost the little holder things that screw into the carpet to hold them in place though. They're fine without them. Just have to pull them back when they slide from getting in and out every once in a while. Mine were leftovers from the SLP Seeker/Xpress program. I have both sets. Seeker ones got more use and are more stained. They'd probably clean up great if I used a real carpet steamer on them.
Old 04-27-2012, 10:39 PM   #2056
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Yeah I need some of them. The ones in my truck now were a present a few years back.
Old 04-28-2012, 09:18 AM   #2057
Independent
 
sonomaguy's Avatar

 
Age: 53
Join Date: Apr 2003
Posts: 3,934
Location: Alberta,Canada
User is: OffLine
Re: Mostizzles dime

Very nice job on the boot and shifter. Looks very clean. I would be proud to run with that.
Old 04-28-2012, 01:23 PM   #2058
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Thanks man!


Today marks the date of MoBirth. Another year older, and even more immature. lol
Old 04-28-2012, 02:17 PM   #2059
poop
 
JCmopar's Avatar
 
Join Date: Nov 2009
Posts: 1,408
Location: oh hai! oh.
User is: OffLine
Re: Mostizzles dime

Happy birthday holmes
Old 04-28-2012, 03:01 PM   #2060
No longer a pizza tech.
 
90blueS10's Avatar
 
Age: 22
Join Date: Sep 2007
Posts: 12,163
Location: Topeka
User is: OffLine
Merry saturday to mah moseph, any big plans?
Old 04-28-2012, 03:08 PM   #2061
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Thanks guys. Just having a bunch of people over.
Old 04-28-2012, 03:12 PM   #2062
No longer a pizza tech.
 
90blueS10's Avatar
 
Age: 22
Join Date: Sep 2007
Posts: 12,163
Location: Topeka
User is: OffLine
Your the big 25 this year right?
Old 04-28-2012, 03:17 PM   #2063
Hot Rod Enthusiast
 
s10kid17's Avatar
 
Age: 23
Join Date: Jan 2009
Posts: 2,350
Location: Chicago, IL
User is: OffLine
Re: Mostizzles dime

Shift boot looks awesome man, clean and simple.
Old 04-28-2012, 03:22 PM   #2064
Wondersmith
 
StirFrey's Avatar
 
Age: 24
Join Date: May 2008
Posts: 4,462
Location: R10 Wisco.
User is: OffLine
Re: Mostizzles dime

happy birfday jerry!
Old 04-28-2012, 04:17 PM   #2065
LOOK AT MY NIPPLES!
 
IhaveNoPantsOn's Avatar
 
Age: 28
Join Date: Apr 2008
Posts: 1,587
Location: Holyoke, MA
User is: Online
Re: Mostizzles dime

Feliz cumpleaños señor!
Old 04-28-2012, 04:44 PM   #2066
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Quote: Originally Posted by 90blueS10
Your the big 25 this year right?
Yup. lol


Thanks a lot guys.
Old 04-28-2012, 04:53 PM   #2067
Girl with wrenches
 
roademon's Avatar
 
Age: 25
Join Date: Sep 2010
Posts: 1,804
Location: Calgary AB
User is: OffLine
Re: Mostizzles dime

Happy Birthday Sexy MAN!!!!
Old 04-29-2012, 12:32 PM   #2068
This is doo doo baby!
 
wildman ss's Avatar
 
Age: 24
Join Date: Apr 2006
Posts: 10,355
Location: Lawrenceville, GA
User is: OffLine
Re: Mostizzles dime

Quote: Originally Posted by roademon
Happy Birthday Sexy MAN!!!!
this
Old 04-29-2012, 03:31 PM   #2069
Independent
 
sonomaguy's Avatar

 
Age: 53
Join Date: Apr 2003
Posts: 3,934
Location: Alberta,Canada
User is: OffLine
Re: Mostizzles dime

Quote: Originally Posted by roademon
Happy Birthday Sexy MAN!!!!
You lucky man.
Old 04-29-2012, 04:21 PM   #2070
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

lol thanks Heater, and Brent.

Scantily clad pictures of yourselves are still being accepted.
Old 04-29-2012, 04:26 PM   #2071
No longer a pizza tech.
 
90blueS10's Avatar
 
Age: 22
Join Date: Sep 2007
Posts: 12,163
Location: Topeka
User is: OffLine
Re: Mostizzles dime

speaking of lloyd mats, my samples are on their way.
Old 04-29-2012, 04:41 PM   #2072
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

You gettin color swatches?
Old 04-29-2012, 07:08 PM   #2073
nope
 
93_Blaze's Avatar

 
Age: 22
Join Date: May 2009
Posts: 3,340
Location: Fort Worth Texas
User is: OffLine
Re: Mostizzles dime

Speaking of weird guys, I saw you have a facebook now lol. Happy birthday man!
Old 04-29-2012, 08:00 PM   #2074
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Thank you. That's a fake facebook that member scuffy took the liberty of making because he's a huge fgt. Report it. lol
Old 04-29-2012, 08:48 PM   #2075
Registered Hoosier
 
Hoosier Rick's Avatar
 
Age: 56
Join Date: Jun 2010
Posts: 2,814
Location: Frankton, Indiana
User is: OffLine
Re: Mostizzles dime

Happy Birthday Mo
Old 04-29-2012, 08:58 PM   #2076
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Thanks Rick!
Old 04-30-2012, 01:04 AM   #2077
Girl with wrenches
 
roademon's Avatar
 
Age: 25
Join Date: Sep 2010
Posts: 1,804
Location: Calgary AB
User is: OffLine
Re: Mostizzles dime

I'll send scantily clad pictures after Brent does.
Old 04-30-2012, 01:13 AM   #2078
No longer a pizza tech.
 
90blueS10's Avatar
 
Age: 22
Join Date: Sep 2007
Posts: 12,163
Location: Topeka
User is: OffLine
Re: Mostizzles dime

Quote: Originally Posted by mostizzle
You gettin color swatches?
Yes sir.
Old 04-30-2012, 01:22 AM   #2079
nope
 
93_Blaze's Avatar

 
Age: 22
Join Date: May 2009
Posts: 3,340
Location: Fort Worth Texas
User is: OffLine
Re: Mostizzles dime

Quote: Originally Posted by roademon
I'll send scantily clad pictures after Brent does.
I'd rather see Brent anyways And lol at the fake page, figures
Old 04-30-2012, 10:42 AM   #2080
Molon Labe
 
Stewzer55's Avatar

 
Age: 24
Join Date: Aug 2010
Posts: 7,846
Location: Ohio
User is: Online
Re: Mostizzles dime

Noodz sent for Mo's birthday.
Old 04-30-2012, 02:16 PM   #2081
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Quote: Originally Posted by roademon
I'll send scantily clad pictures after Brent does.
He sends them to me daily. Better get to work!
Quote: Originally Posted by 90blueS10
Yes sir.
Sweet, take pics.
Quote: Originally Posted by Stewzer55
Noodz sent for Mo's birthday.
Looks like I'll be asking for new retinas for xmas.
Old 05-06-2012, 12:39 AM   #2082
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

I ordered these....


Not sure how I'm going to incorporate 1 or both of them yet.

I also just got this....

Now I can shitcan the crappy paper filter that came with the cheapo CAI.


I also just got some LEDs for my cluster and license plate lights. For those that do the swap in the cluster and have the bulb holders that have the 194s soldered into them Phil informed me that a lot of Fords have holders that the bulbs just slide into rather than having to disassemble and solder the bulbs in. Out of curiosity I went to the garage to look at the 3rd gen F body cluster that I have in there and as luck would have it it has the holders that the bulbs just slip into so I just snagged them out if it the use in my truck.
I'll get around to messing with all of this as soon as I can. I've been doing a lot of bouncing around messing with other peoples shit.
Old 05-06-2012, 12:44 AM   #2083
Pussy Wrangler
 
AK49BWL's Avatar
 
Age: 25
Join Date: Jan 2007
Posts: 2,610
Location: Anchorage, AK
User is: OffLine
Re: Mostizzles dime

If you pull the cluster out of a 90s GM fullsize, they have the 194 holders you can slide the bulbs into as well - that's what mine are from.
Old 05-06-2012, 12:50 AM   #2084
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Good info for the LED swap how-to. I'm not great at soldering stuff so I was happy to find an alternative.
Old 05-06-2012, 01:20 AM   #2085
poop
 
JCmopar's Avatar
 
Join Date: Nov 2009
Posts: 1,408
Location: oh hai! oh.
User is: OffLine
Re: Mostizzles dime

Good to know! I saved these from my Ramcharger when I scrapped it, but I wasn't sure if they were the same, I haven't gotten around to pulling my cluster to check.
http://i956.photobucket.com/albums/a...r/15f19762.jpg
http://i956.photobucket.com/albums/a...r/ce09de5f.jpg
Old 05-06-2012, 01:34 AM   #2086
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

They look the same to me.
Old 05-06-2012, 01:41 AM   #2087
Pussy Wrangler
 
AK49BWL's Avatar
 
Age: 25
Join Date: Jan 2007
Posts: 2,610
Location: Anchorage, AK
User is: OffLine
Re: Mostizzles dime

Looks identical. I love those bulbs btw, they are awesome.

Yeah I can't remember right offhand what number the small size blinker holders are but the full size clusters have loads of them, also the removable bulb kind, not soldered (98+ blinker bulbs are soldered to the housings, not sure about 95-97) - picked a few of those up as well for both the blinkers, brights indicator, and the HVAC lighting. They make things so easy

Need any help with LED stuff, feel free to PM me on either forum... My entire truck is done up with them so I sort of know what's going on
Old 05-06-2012, 03:07 PM   #2088
The Vehicle Dynamics Bro.
 
badmatt's Avatar

 
Join Date: Aug 2005
Posts: 4,565
Location: america's hat
User is: OffLine
Re: Mostizzles dime

**** this truck is Mo Sexay!

hey buddddy.
Old 05-06-2012, 06:25 PM   #2089
The WaterBoy
 
nomacane07's Avatar
 
Age: 26
Join Date: Feb 2011
Posts: 2,325
Location: The Burg, Indiana
User is: OffLine
Re: Mostizzles dime

What's those badges for?
Old 05-06-2012, 07:32 PM   #2090
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

I did the beandip anti-tailgate rattle mod, tracked down the rattle in my dash and put LEDs in my cluster. The LEDs look like ass and will be coming back out. Waste of 10 bucks. Maybe a couple of them aren't lighting up or something,looks like shit that's all I know. I did notice that I had to mess with the thin wire leads that they use on them to even get them to work in my license plate lights and rear markers. Who knows.
Quote: Originally Posted by AK49BWL
Looks identical. I love those bulbs btw, they are awesome.

Yeah I can't remember right offhand what number the small size blinker holders are but the full size clusters have loads of them, also the removable bulb kind, not soldered (98+ blinker bulbs are soldered to the housings, not sure about 95-97) - picked a few of those up as well for both the blinkers, brights indicator, and the HVAC lighting. They make things so easy

Need any help with LED stuff, feel free to PM me on either forum... My entire truck is done up with them so I sort of know what's going on
Any ideas???
Quote: Originally Posted by badmatt
**** this truck is Mo Sexay!

hey buddddy.
Thanks brah. Good to see you posting again.
Quote: Originally Posted by nomacane07
What's those badges for?
Well my intention is to incorporate them into the truck but they were used on earl/mid 90's Oldsmobile with the FE3 package(think Olds' version of the ZQ8 option.
Old 05-06-2012, 07:44 PM   #2091
Registered User
 
badmofo529's Avatar
 
Age: 23
Join Date: Nov 2010
Posts: 2,685
Location: Flint, MI
User is: OffLine
Re: Mostizzles dime

the cheap bulbs are directional. pull it out, stick a 9v w/ some leads on one of the led's and whatever ones dont look like they are lighting up, flip them 180. i tested each socket before i put them in to make sure they worked, then checked to make sure they were all going the right way.
Old 05-06-2012, 08:02 PM   #2092
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Well fcuk a duck. lol Oh well, I need to take the dash apart again anyways.
Old 05-06-2012, 08:14 PM   #2093
The Vehicle Dynamics Bro.
 
badmatt's Avatar

 
Join Date: Aug 2005
Posts: 4,565
Location: america's hat
User is: OffLine
Re: Mostizzles dime

OH!

And happy b-lated buddy!
Old 05-06-2012, 08:22 PM   #2094
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Thanks Matt I appreciate it.
Old 05-06-2012, 11:47 PM   #2095
Pussy Wrangler
 
AK49BWL's Avatar
 
Age: 25
Join Date: Jan 2007
Posts: 2,610
Location: Anchorage, AK
User is: OffLine
Re: Mostizzles dime

That was going to be my first response, did you check them both ways.. LED bulbs are polarized. Are they the same bulbs like the ones JCm posted, from v-leds? If they are and you end up getting them in there right, you're sure to love them. If they're the cheap ones, results vary...
Old 05-07-2012, 12:00 AM   #2096
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

Yeah, same bulbs. Well they look the same anyways.
Old 05-07-2012, 12:41 AM   #2097
The WaterBoy
 
nomacane07's Avatar
 
Age: 26
Join Date: Feb 2011
Posts: 2,325
Location: The Burg, Indiana
User is: OffLine
Re: Mostizzles dime

I love my LEDs just sayin lol
Old 05-07-2012, 05:21 PM   #2098
WTFWBJD
 
mostizzle's Avatar
 
Join Date: Aug 2009
Posts: 27,939
Location: 1800 Crenshaw
User is: OffLine
Re: Mostizzles dime

I got it all fingered out. Thanks bros.







I'd like to do my climate controls and my dome light eventually so and info on that would be sweet. I know there's a how-to but whatever.
Old 05-07-2012, 05:56 PM   #2099
Pussy Wrangler
 
AK49BWL's Avatar
 
Age: 25
Join Date: Jan 2007
Posts: 2,610
Location: Anchorage, AK
User is: OffLine
Re: Mostizzles dime

HVAC controller, iirc, is 4 of the little #74 base bulbs. I could be wrong, I know that's right for 98+... But be aware, if it's anything like mine you'll have dead spots like crazy if you don't do some serious mods to the inside of the controller case.. Mine has about 10 LEDs in it lol.

Your dome light is a 211-2 Festoon. This is the bulb I bought for mine: http://www.superbrightleds.com/cgi-b...-x9.htm#photos - works pretty well.
Old 05-07-2012, 07:06 PM   #2100
Registered User
 
e3mcgrath's Avatar
 
Join Date: Sep 2003
Posts: 3,388
Location:
User is: OffLine
Re: Mostizzles dime

Quote: Originally Posted by AK49BWL
If you pull the cluster out of a 90s GM fullsize, they have the 194 holders you can slide the bulbs into as well - that's what mine are from.
just adding info, they need to be out of a 96-98. the older ones are soldered in like s-series
Sponsored Links
Advertisement
 

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the S-10 Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 07:52 PM.

Powered by vBulletin® Copyright ©2000 - 2011, Jelsoft Enterprises Ltd. SEO by vBSEO 3.2.0
SEO by vBSEO
vBulletin Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.