Post Your 1/4 Times Here!

jmwxtreme43 · 01-10-2005, 11:46 AM

that should be more like a 16.2 @84 or 85mph. What were your 60' marks? My truck ran a 16.0 stock aside from a muffler and cone, that was in 95 degree weather and humidity on 2.38 best 60'

Carsnob · 01-10-2005, 11:51 AM

I don't remember the 60' time (don't have the slip in front of me) Nothing impressive though. I've got good tires, but the open diff 3.08 doesn't help much...

blaaazin · 01-10-2005, 03:44 PM

haha.. bone stock 19.0 @ 69 mph (2001 S10 2.2L Standard cab)

***What?*** · 01-10-2005, 05:17 PM

Quote: Originally Posted by blaaazin

haha.. bone stock 19.0 @ 69 mph (2001 S10 2.2L Standard cab)

lets change it to 18s wit al's header

BTW i ran 18.1 wit k & n only, other mods was upgraded after a while, im officially goin to track next week, i was gonna wait till i git the studs but i got things goin on right now, so i'll just run wit wha i got now and see the best time, apparently lookn at old sheet i ran 2.4sec for 60' time if ya'll gonna upgrade the sheet, also i thought i might add, gutless ran 17.3 wit some mods dunno if ya'll wanna put that there

i guess up to him

XBLZR03 · 01-11-2005, 10:02 AM

2003 Blazer Xtreme 2-Door
4.3 v6 automatic 4l60e
K&N DropIn Filter and Flowmaster Delta-40 Muffler

16.009 @ 87.92 MPH with a 2.447 60'

Baxtor44 · 01-11-2005, 12:37 PM

92 Typhoon 12.83 @ 110mph

Lenny95NeoN · 01-12-2005, 07:55 PM

Quote: Originally Posted by XBLZR03

2003 Blazer Xtreme 2-Door
4.3 v6 automatic 4l60e
K&N DropIn Filter and Flowmaster Delta-40 Muffler

16.009 @ 87.92 MPH with a 2.447 60'

Quite impressive, I see now I gotta look out for a few automatics w / Good exhaust systems.
I gotta get one for my truck. I guess it really does help out a bit. I think I can see low 15's after exhaust and a pcm reprogram ....... .And shorter tires of course.
If I can get there I''ll post the slips and then stop racing Blu. Time to get the NeoN into the 14's at least.

Baxtor44 · 01-12-2005, 09:16 PM

Living at sea level helps I really haven't done to much.. I read that there prety much fuel starved and I just upgraded the system ( pump, 36lb injectors, fuel pressure to 50 lbs) But shes getting old.

Syclone/Typhoon
Still the quickest 0-60 !

XBLZR03 · 01-13-2005, 09:29 AM

Yeah sea level helps a lot.... Capital Raceway here is 300 ft above sea level

Dan Plante · 01-13-2005, 10:10 AM

I have been to Capital Raceway before. Crappy track but still a place to race. They don't prep that place at all.

XBLZR03 · 01-13-2005, 10:13 AM

Quote: Originally Posted by Dan P.

I have been to Capital Raceway before. Crappy track but still a place to race. They don't prep that place at all.

I have always gotten good traction there. 75/80 I heard was garbage though. I'm going to MIR to run though I heard their track is nice!

Lenny95NeoN · 01-13-2005, 11:02 PM

Quote: Originally Posted by Dan P.

I have been to Capital Raceway before. Crappy track but still a place to race. They don't prep that place at all.

They have since resurfaced the track. The day I was there they made it known, many times over the track broadcast, when they were preping the track... well at least when they were spraying VHT.
Still not the type of prep U see at MIRw/ all the trucks, tracors, and Jet dryers. But better than the street.

blaaazin · 01-16-2005, 03:59 PM

i race at epping dragway.. good place.

XxsilentjayxX · 01-16-2005, 05:36 PM

i go to National Trail Raceway.. its an alright track, nothing too special. i've heard people getting better times in Wooster, Ohio but thats like a 2-3 hour drive.

digital_xtreme · 01-21-2005, 12:30 PM

I've been looking for that one vid of the 2 s10's at a stop light, one has a cam and the other doesn't... they both take off and the one with the cam smokes him....it was posted on here a while back..

RatherHaveAWRX · 01-22-2005, 01:25 PM

Havent been on here in a while...

I ran in October at Lapeer Raceway in Michigan. My mods are in my signature. Reaction was bad, 1.106 but it was my first race at a dragstrip. 60 ft was 2.307. 1/8 was 10.242. and 1/4 mile was 15.971 @ 85.09mph. The wind was strong and directly head on though, so i feel as if i could have been a tad faster... maybe

Quick S-10 · 01-24-2005, 01:22 AM

I've got a 408 in a 1987 Reg cab

9.63 @ 141 with a lotta tire spin hopefully see some 9.40's in 05'

RedFrk · 02-05-2005, 02:26 PM

I got a new best a few months ago.

14.37 @ 92.25 with a 1.97 60'. I owe that leap in my time to the M&H muscle car drag tires. I got half a second better with these tires.

Turbo and 12s coming soon!

Teeleton · 02-07-2005, 05:12 AM

Times in the sig. No runs yet on the new engine.

Hotrod with that time had new rotating assembly, holley TBI, holley intake, cam, pro-mag rockers, stock heads, and JBA headers, 3.73s & a Zex.

Daily is 100% stock, 3.08 open rear. Both have a 4.3L w/ 700R4

Teeleton

BlackGhost21 · 02-13-2005, 05:04 AM

Im running 14.5 at 98 mph all i have is some intake full exhaust system and lot of tunning done.

ZZ4Blazer · 02-13-2005, 06:23 AM

In a 95 TBI truck?? I'd love to see your time slips. Maybe 88 mph, not 98.

s10rz350 · 02-13-2005, 04:41 PM

and what tuning is that?

what about 60ft times? Must be decent to get a 14.5.

jmwxtreme43 · 02-13-2005, 06:23 PM

Quote: Originally Posted by BlackGhost21

Im running 14.5 at 98 mph all i have is some intake full exhaust system and lot of tunning done.

possible clown post? Good way to start off

ZZ4Blazer · 02-13-2005, 07:29 PM

Only running 14.5@98 mph...his 60 ft would have to be like 2.4. I ran 14.1@98 with a 2.1 60 ft.

My biggest problem was a mostly stock TBI truck running that quick of a trap speed. Like bumping a 160 hp TBI motor, to like 275-300 hp with a few bolt ons.

s10rz350 · 02-14-2005, 01:16 AM

Quote: Originally Posted by ZZ4Blazer

Only running 14.5@98 mph...his 60 ft would have to be like 2.4. I ran 14.1@98 with a 2.1 60 ft.

My biggest problem was a mostly stock TBI truck running that quick of a trap speed. Like bumping a 160 hp TBI motor, to like 275-300 hp with a few bolt ons.

I wasnt even thinking about the mph, just the ET alone with maybe 200hp would need a better than average 60ft.

EDIT: but I do agree with what youre saying ZZ4.

digital_xtreme · 02-14-2005, 01:33 AM

Quote: Originally Posted by RatherHaveAWRX

Havent been on here in a while...

I ran in October at Lapeer Raceway in Michigan. My mods are in my signature. Reaction was bad, 1.106 but it was my first race at a dragstrip. 60 ft was 2.307. 1/8 was 10.242. and 1/4 mile was 15.971 @ 85.09mph. The wind was strong and directly head on though, so i feel as if i could have been a tad faster... maybe

Damn dude let me know when your going to be up there again... i'll meet you up. I'm in Lapeer a few times out of the week.

Navecm · 02-21-2005, 11:34 AM

Here is an update for this month, I left that one time off that came under quick question because it was his first post, and also he did not come back to defend himself.

ZZ4Blazer · 02-21-2005, 03:33 PM

Damn, if I actually knew how to drive my truck..I could be in the top 10

s10rz350 · 02-21-2005, 03:40 PM

Quote: Originally Posted by ZZ4Blazer

Damn, if I actually knew how to drive my truck..I could be in the top 10

Get some DR's with a minor launch and you'll be there.

ZZ4Blazer · 02-21-2005, 03:59 PM

The sad part is, that run is on drag radials. I just dont' have enough time on them. Just punching it off idle, it hooks, but won't pull under 2.0 60 ft. Over 1500 rpm, and under 2000 rpm, it'll hook, and bog....still over 2.0 60 ft. Next run, I did a nasty burn out, dropped the clutch at 2500, and it burned the tires off sideways through 1st and 2nd.

I've got my caltracs this year, finally found a short throw shifter for my 6 speed, and hopefully will have my nitrous finally ready to go. But, I've been changing so much over the winter, it won't look like the same vehicle.

I know my ET wont' ever be great, if my mph's there, that'' make me happy, cause I know Im making the power. My trucks certainly not a drag truck.

IF I wanted that, I'd have a standard cab, 350/350 w/tranny brake, 3.42's, and a T76 w/alcohol injection and bout 20 lbs of boost.

RANDY406 · 02-25-2005, 02:07 AM

I should be able to put up some new,and much better times soon.Cracked my stock 400 block.New combo has a Motown block,upped the compression to 13.5,ported out the AFR 220 heads,Comp Cams will be making a custom grind,and added a Pro Shot fogger.I should be picking up between 100 and 150 HP on the motor alone.I'm putting the short block together this weekend,heads will be done next week.

cws10blazer · 03-01-2005, 11:52 PM

my blazer ran 15.76 @ 86.23 and a sad 60 ft. of 2.299

jmwxtreme43 · 03-02-2005, 01:28 PM

Quote: Originally Posted by cws10blazer

my blazer ran 15.76 @ 86.23 and a sad 60 ft. of 2.299

mods?

cws10blazer · 03-03-2005, 12:31 AM

4.3 had 4.10 gears, tbi spacer, headman full length headers, b&m shift kit, and march under drives. Soon to have a 350 in it just need a couple of small parts and it will be ready to go in

jmwxtreme43 · 03-03-2005, 01:02 AM

Quote: Originally Posted by cws10blazer

4.3 had 4.10 gears, tbi spacer, headman full length headers, b&m shift kit, and march under drives. Soon to have a 350 in it just need a couple of small parts and it will be ready to go in

sounds cool, impressive for a tbi!

MINTSICK · 03-03-2005, 10:11 AM

Quote: Originally Posted by jmwxtreme43

sounds cool, impressive for a tbi!

I would agree, sounds like a fun truck!

hellbents10 · 03-03-2005, 05:36 PM

How come none of mine are on there???

cws10blazer · 03-04-2005, 12:04 AM

thanks its a lot better now since i got my pos locker in and different gears in it yesterday makes it alot more fun now

Navecm · 03-04-2005, 11:15 AM

Quote: Originally Posted by hellbents10

How come none of mine are on there???

Did you ever post times and information in this thread? I don't think I missed any, but it is possible. Post your times and mods and I will be sure to add them for the next update.

hellbents10 · 03-04-2005, 07:31 PM

96' S-10, reg cab shorty, 3250# racewieght, 355sbc, 170 shot, stock 8.5" rear w/ 3.73 gears, th350, 10.64@126.5, 1.51 60ft on 235/60r15 MT radials.

01' S-10, reg cab shorty, 4.3l auto, 100 shot, 3.42 gear, zexel, all bolt ons, 13.29@102.05, 1.84 60ft on 26x10.5x15 MT et streets.

s10freak · 03-09-2005, 09:44 PM

16.8. bone stock. 91 reg cab s-10.

SCXtreme · 03-09-2005, 09:56 PM

2001 Xtreme 4.3L 4l60-e auto
Supercharged 9lbs

1/4: 15.37
60' : 2.1
mph: 88.7
r/t : .631

graniteguy · 03-14-2005, 11:35 PM

I finally have a time to post. Better times soon as I get the rear to hook.

15.14 @88.91 MPH 60' = 2.37

94 s10 xcab
4.3 carbed, edelbrock intake, e-fan, 96+ heads, msd6, weight reduction, auto 700r4 tranny

jmwxtreme43 · 03-15-2005, 01:25 AM

Quote: Originally Posted by SCXtreme

2001 Xtreme 4.3L 4l60-e auto
Supercharged 9lbs

1/4: 15.37
60' : 2.1
mph: 88.7
r/t : .631

that just dont seem right?!

MINTSICK · 03-15-2005, 11:11 AM

Quote: Originally Posted by graniteguy

I finally have a time to post. Better times soon as I get the rear to hook.

15.14 @88.91 MPH 60' = 2.37

94 s10 xcab
4.3 carbed, edelbrock intake, e-fan, 96+ heads, msd6, weight reduction, auto 700r4 tranny

Nice, almost a 14 with a 2.4 60', you should be at maybe a mid 14 if you can get the truck to hook up.

graniteguy · 03-15-2005, 05:50 PM

Quote: Originally Posted by MINTSICK

Nice, almost a 14 with a 2.4 60', you should be at maybe a mid 14 if you can get the truck to hook up.

That's the plan,

s10freak · 03-15-2005, 10:21 PM

Quote: Originally Posted by s10freak

16.8. bone stock. 91 reg cab s-10.

anyone think it would be possible for me to get a mid to high 14 sec pass on my first gen. with headers, intake, some sort of limited slip, b&m shift kit, and a 75 shot of nitrous. or maybe just with the nitrous.

frmatmn2ash120 · 03-17-2005, 10:29 PM

the other day i ran a 19.4 in my 96 s10 ext. cab. my mods are flowmaster exhaust and k&n filter.

Childs Play · 03-21-2005, 10:46 PM

14.146 at 98 mph. Ran out of trans, and rolled out of the gate, no launch. 2.26 60 ft time

s10rz350 · 03-21-2005, 11:04 PM

Quote: Originally Posted by Childs Play

14.146 at 98 mph. Ran out of trans, and rolled out of the gate, no launch. 2.26 60 ft time

truck/mods?

01-10-2005, 11:46 AM	#551
jmwxtreme43 www.myspace.com/MINTSICK Age: 25 Join Date: Oct 2003 Posts: 4,531 Location: Kingston, NH User is: OffLine	Re: Post Your 1/4 Times Here! that should be more like a 16.2 @84 or 85mph. What were your 60' marks? My truck ran a 16.0 stock aside from a muffler and cone, that was in 95 degree weather and humidity on 2.38 best 60'
	[Reply w/Quote]

01-10-2005, 11:51 AM	#552
Carsnob I am the ANTI-BLING. Age: 34 Join Date: Sep 2002 Posts: 150 Location: Jackson, MS User is: OffLine	Re: Post Your 1/4 Times Here! I don't remember the 60' time (don't have the slip in front of me) Nothing impressive though. I've got good tires, but the open diff 3.08 doesn't help much...
	[Reply w/Quote]

01-10-2005, 03:44 PM	#553
blaaazin crazy dave Age: 24 Join Date: Jul 2004 Posts: 251 Location: Central Mass User is: OffLine	Re: Post Your 1/4 Times Here! haha.. bone stock 19.0 @ 69 mph (2001 S10 2.2L Standard cab)
	[Reply w/Quote]

01-10-2005, 05:17 PM	#554
*What?* Moderator Join Date: Jan 2004 Posts: 18,003 Location: AZ User is: OffLine	Re: Post Your 1/4 Times Here! Quote: Originally Posted by blaaazin haha.. bone stock 19.0 @ 69 mph (2001 S10 2.2L Standard cab) lets change it to 18s wit al's header BTW i ran 18.1 wit k & n only, other mods was upgraded after a while, im officially goin to track next week, i was gonna wait till i git the studs but i got things goin on right now, so i'll just run wit wha i got now and see the best time, apparently lookn at old sheet i ran 2.4sec for 60' time if ya'll gonna upgrade the sheet, also i thought i might add, gutless ran 17.3 wit some mods dunno if ya'll wanna put that there i guess up to him
	[Reply w/Quote]

01-11-2005, 10:02 AM	#555
XBLZR03 Got keyless door handles? Age: 25 Join Date: Feb 2003 Posts: 2,217 Location: Jessup, MD User is: OffLine	Re: Post Your 1/4 Times Here! 2003 Blazer Xtreme 2-Door 4.3 v6 automatic 4l60e K&N DropIn Filter and Flowmaster Delta-40 Muffler 16.009 @ 87.92 MPH with a 2.447 60'
	[Reply w/Quote]

01-11-2005, 12:37 PM	#556
Baxtor44 Registered Moron Age: 50 Join Date: May 2003 Posts: 182 Location: Everett. Wa User is: OffLine	Re: Post Your 1/4 Times Here! 92 Typhoon 12.83 @ 110mph
	[Reply w/Quote]

01-12-2005, 07:55 PM	#557
Lenny95NeoN It WAS a Blazer Age: 32 Join Date: Feb 2004 Posts: 521 Location: Baltimore, Maryland User is: OffLine	Re: Post Your 1/4 Times Here! Quote: Originally Posted by XBLZR03 2003 Blazer Xtreme 2-Door 4.3 v6 automatic 4l60e K&N DropIn Filter and Flowmaster Delta-40 Muffler 16.009 @ 87.92 MPH with a 2.447 60' Quite impressive, I see now I gotta look out for a few automatics w / Good exhaust systems. I gotta get one for my truck. I guess it really does help out a bit. I think I can see low 15's after exhaust and a pcm reprogram ....... .And shorter tires of course. If I can get there I''ll post the slips and then stop racing Blu. Time to get the NeoN into the 14's at least. Last edited by Lenny95NeoN : 01-12-2005 at 09:25 PM.
	[Reply w/Quote]

01-12-2005, 09:16 PM	#558
Baxtor44 Registered Moron Age: 50 Join Date: May 2003 Posts: 182 Location: Everett. Wa User is: OffLine	Re: Post Your 1/4 Times Here! Living at sea level helps I really haven't done to much.. I read that there prety much fuel starved and I just upgraded the system ( pump, 36lb injectors, fuel pressure to 50 lbs) But shes getting old. Syclone/Typhoon Still the quickest 0-60 !
	[Reply w/Quote]

01-13-2005, 09:29 AM	#559
XBLZR03 Got keyless door handles? Age: 25 Join Date: Feb 2003 Posts: 2,217 Location: Jessup, MD User is: OffLine	Re: Post Your 1/4 Times Here! Yeah sea level helps a lot.... Capital Raceway here is 300 ft above sea level
	[Reply w/Quote]

01-13-2005, 10:10 AM	#560
Dan Plante Registered User Age: 33 Join Date: Jul 2001 Posts: 3,850 Location: Franklin, MA User is: OffLine	Re: Post Your 1/4 Times Here! I have been to Capital Raceway before. Crappy track but still a place to race. They don't prep that place at all.
	[Reply w/Quote]

01-13-2005, 10:13 AM	#561
XBLZR03 Got keyless door handles? Age: 25 Join Date: Feb 2003 Posts: 2,217 Location: Jessup, MD User is: OffLine	Re: Post Your 1/4 Times Here! Quote: Originally Posted by Dan P. I have been to Capital Raceway before. Crappy track but still a place to race. They don't prep that place at all. I have always gotten good traction there. 75/80 I heard was garbage though. I'm going to MIR to run though I heard their track is nice!
	[Reply w/Quote]

01-13-2005, 11:02 PM	#562
Lenny95NeoN It WAS a Blazer Age: 32 Join Date: Feb 2004 Posts: 521 Location: Baltimore, Maryland User is: OffLine	Re: Post Your 1/4 Times Here! Quote: Originally Posted by Dan P. I have been to Capital Raceway before. Crappy track but still a place to race. They don't prep that place at all. They have since resurfaced the track. The day I was there they made it known, many times over the track broadcast, when they were preping the track... well at least when they were spraying VHT. Still not the type of prep U see at MIRw/ all the trucks, tracors, and Jet dryers. But better than the street. Last edited by Lenny95NeoN : 01-16-2005 at 07:59 AM.
	[Reply w/Quote]

01-16-2005, 03:59 PM	#563
blaaazin crazy dave Age: 24 Join Date: Jul 2004 Posts: 251 Location: Central Mass User is: OffLine	Re: Post Your 1/4 Times Here! i race at epping dragway.. good place.
	[Reply w/Quote]

01-16-2005, 05:36 PM	#564
XxsilentjayxX Registered User Age: 23 Join Date: Jan 2004 Posts: 337 Location: Columbus, OH User is: OffLine	Re: Post Your 1/4 Times Here! i go to National Trail Raceway.. its an alright track, nothing too special. i've heard people getting better times in Wooster, Ohio but thats like a 2-3 hour drive.
	[Reply w/Quote]

01-21-2005, 12:30 PM	#565
digital_xtreme Registered User Age: 25 Join Date: Feb 2003 Posts: 3,255 Location: Lapeer / Midland, Michigan User is: OffLine	Re: Post Your 1/4 Times Here! I've been looking for that one vid of the 2 s10's at a stop light, one has a cam and the other doesn't... they both take off and the one with the cam smokes him....it was posted on here a while back..
	[Reply w/Quote]

01-22-2005, 01:25 PM	#566
RatherHaveAWRX Fast S-10, whats that? Age: 25 Join Date: Apr 2004 Posts: 270 Location: East Lansing, Michigan User is: OffLine	Re: Post Your 1/4 Times Here! Havent been on here in a while... I ran in October at Lapeer Raceway in Michigan. My mods are in my signature. Reaction was bad, 1.106 but it was my first race at a dragstrip. 60 ft was 2.307. 1/8 was 10.242. and 1/4 mile was 15.971 @ 85.09mph. The wind was strong and directly head on though, so i feel as if i could have been a tad faster... maybe
	[Reply w/Quote]

01-24-2005, 01:22 AM	#567
Quick S-10 Registered User Age: 33 Join Date: Jan 2005 Posts: 7 Location: User is: OffLine	Re: Post Your 1/4 Times Here! I've got a 408 in a 1987 Reg cab 9.63 @ 141 with a lotta tire spin hopefully see some 9.40's in 05'
	[Reply w/Quote]

02-05-2005, 02:26 PM	#568
RedFrk Registered User Age: 28 Join Date: Jan 2004 Posts: 9 Location: Tatamy, PA User is: OffLine	Re: Post Your 1/4 Times Here! I got a new best a few months ago. 14.37 @ 92.25 with a 1.97 60'. I owe that leap in my time to the M&H muscle car drag tires. I got half a second better with these tires. Turbo and 12s coming soon! Last edited by RedFrk : 02-05-2005 at 02:28 PM.
	[Reply w/Quote]

02-07-2005, 05:12 AM	#569
Teeleton it looks stock.. kinda.. Join Date: Oct 2002 Posts: 638 Location: Houston, TX User is: OffLine	Re: Post Your 1/4 Times Here! Times in the sig. No runs yet on the new engine. Hotrod with that time had new rotating assembly, holley TBI, holley intake, cam, pro-mag rockers, stock heads, and JBA headers, 3.73s & a Zex. Daily is 100% stock, 3.08 open rear. Both have a 4.3L w/ 700R4 Teeleton
	[Reply w/Quote]

02-13-2005, 05:04 AM	#570
BlackGhost21 Registered User Age: 25 Join Date: Feb 2005 Posts: 1 Location: Albuquerque, NM User is: OffLine	Re: Post Your 1/4 Times Here! Im running 14.5 at 98 mph all i have is some intake full exhaust system and lot of tunning done.
	[Reply w/Quote]

02-13-2005, 06:23 AM	#571
ZZ4Blazer Getting faster Age: 29 Join Date: Oct 2003 Posts: 1,183 Location: Akron, Ohio User is: OffLine	Re: Post Your 1/4 Times Here! In a 95 TBI truck?? I'd love to see your time slips. Maybe 88 mph, not 98.
	[Reply w/Quote]

02-13-2005, 04:41 PM	#572
s10rz350 Un-Blown Fake ZQ8 Age: 34 Join Date: Jul 2001 Posts: 3,455 Location: Los Angeles User is: OffLine	Re: Post Your 1/4 Times Here! and what tuning is that? what about 60ft times? Must be decent to get a 14.5.
	[Reply w/Quote]

02-13-2005, 06:23 PM	#573
jmwxtreme43 www.myspace.com/MINTSICK Age: 25 Join Date: Oct 2003 Posts: 4,531 Location: Kingston, NH User is: OffLine	Re: Post Your 1/4 Times Here! Quote: Originally Posted by BlackGhost21 Im running 14.5 at 98 mph all i have is some intake full exhaust system and lot of tunning done. possible clown post? Good way to start off
	[Reply w/Quote]

02-13-2005, 07:29 PM	#574
ZZ4Blazer Getting faster Age: 29 Join Date: Oct 2003 Posts: 1,183 Location: Akron, Ohio User is: OffLine	Re: Post Your 1/4 Times Here! Only running 14.5@98 mph...his 60 ft would have to be like 2.4. I ran 14.1@98 with a 2.1 60 ft. My biggest problem was a mostly stock TBI truck running that quick of a trap speed. Like bumping a 160 hp TBI motor, to like 275-300 hp with a few bolt ons.
	[Reply w/Quote]

02-14-2005, 01:16 AM	#575
s10rz350 Un-Blown Fake ZQ8 Age: 34 Join Date: Jul 2001 Posts: 3,455 Location: Los Angeles User is: OffLine	Re: Post Your 1/4 Times Here! Quote: Originally Posted by ZZ4Blazer Only running 14.5@98 mph...his 60 ft would have to be like 2.4. I ran 14.1@98 with a 2.1 60 ft. My biggest problem was a mostly stock TBI truck running that quick of a trap speed. Like bumping a 160 hp TBI motor, to like 275-300 hp with a few bolt ons. I wasnt even thinking about the mph, just the ET alone with maybe 200hp would need a better than average 60ft. EDIT: but I do agree with what youre saying ZZ4. Last edited by s10rz350 : 02-14-2005 at 01:39 AM.
	[Reply w/Quote]

02-14-2005, 01:33 AM	#576
digital_xtreme Registered User Age: 25 Join Date: Feb 2003 Posts: 3,255 Location: Lapeer / Midland, Michigan User is: OffLine	Re: Post Your 1/4 Times Here! Quote: Originally Posted by RatherHaveAWRX Havent been on here in a while... I ran in October at Lapeer Raceway in Michigan. My mods are in my signature. Reaction was bad, 1.106 but it was my first race at a dragstrip. 60 ft was 2.307. 1/8 was 10.242. and 1/4 mile was 15.971 @ 85.09mph. The wind was strong and directly head on though, so i feel as if i could have been a tad faster... maybe Damn dude let me know when your going to be up there again... i'll meet you up. I'm in Lapeer a few times out of the week.
	[Reply w/Quote]

02-21-2005, 11:34 AM	#577
Navecm LT1 Powered Age: 25 Join Date: Oct 2002 Posts: 2,463 Location: Southern NH User is: OffLine	Re: Post Your 1/4 Times Here! Here is an update for this month, I left that one time off that came under quick question because it was his first post, and also he did not come back to defend himself.
	[Reply w/Quote]

02-21-2005, 03:33 PM	#578
ZZ4Blazer Getting faster Age: 29 Join Date: Oct 2003 Posts: 1,183 Location: Akron, Ohio User is: OffLine	Re: Post Your 1/4 Times Here! Damn, if I actually knew how to drive my truck..I could be in the top 10
	[Reply w/Quote]

02-21-2005, 03:40 PM	#579
s10rz350 Un-Blown Fake ZQ8 Age: 34 Join Date: Jul 2001 Posts: 3,455 Location: Los Angeles User is: OffLine	Re: Post Your 1/4 Times Here! Quote: Originally Posted by ZZ4Blazer Damn, if I actually knew how to drive my truck..I could be in the top 10 Get some DR's with a minor launch and you'll be there.
	[Reply w/Quote]

02-21-2005, 03:59 PM	#580
ZZ4Blazer Getting faster Age: 29 Join Date: Oct 2003 Posts: 1,183 Location: Akron, Ohio User is: OffLine	Re: Post Your 1/4 Times Here! The sad part is, that run is on drag radials. I just dont' have enough time on them. Just punching it off idle, it hooks, but won't pull under 2.0 60 ft. Over 1500 rpm, and under 2000 rpm, it'll hook, and bog....still over 2.0 60 ft. Next run, I did a nasty burn out, dropped the clutch at 2500, and it burned the tires off sideways through 1st and 2nd. I've got my caltracs this year, finally found a short throw shifter for my 6 speed, and hopefully will have my nitrous finally ready to go. But, I've been changing so much over the winter, it won't look like the same vehicle. I know my ET wont' ever be great, if my mph's there, that'' make me happy, cause I know Im making the power. My trucks certainly not a drag truck. IF I wanted that, I'd have a standard cab, 350/350 w/tranny brake, 3.42's, and a T76 w/alcohol injection and bout 20 lbs of boost. Last edited by ZZ4Blazer : 02-21-2005 at 04:01 PM.
	[Reply w/Quote]

02-25-2005, 02:07 AM	#581
RANDY406 Registered User Age: 44 Join Date: Nov 2003 Posts: 321 Location: Port Charlotte Fl. User is: OffLine	Re: Post Your 1/4 Times Here! I should be able to put up some new,and much better times soon.Cracked my stock 400 block.New combo has a Motown block,upped the compression to 13.5,ported out the AFR 220 heads,Comp Cams will be making a custom grind,and added a Pro Shot fogger.I should be picking up between 100 and 150 HP on the motor alone.I'm putting the short block together this weekend,heads will be done next week.
	[Reply w/Quote]

03-01-2005, 11:52 PM	#582
cws10blazer Registered User Age: 29 Join Date: Jul 2004 Posts: 11 Location: glencoe, ky User is: OffLine	Re: Post Your 1/4 Times Here! my blazer ran 15.76 @ 86.23 and a sad 60 ft. of 2.299
	[Reply w/Quote]

03-02-2005, 01:28 PM	#583
jmwxtreme43 www.myspace.com/MINTSICK Age: 25 Join Date: Oct 2003 Posts: 4,531 Location: Kingston, NH User is: OffLine	Re: Post Your 1/4 Times Here! Quote: Originally Posted by cws10blazer my blazer ran 15.76 @ 86.23 and a sad 60 ft. of 2.299 mods?
	[Reply w/Quote]

03-03-2005, 12:31 AM	#584
cws10blazer Registered User Age: 29 Join Date: Jul 2004 Posts: 11 Location: glencoe, ky User is: OffLine	Re: Post Your 1/4 Times Here! 4.3 had 4.10 gears, tbi spacer, headman full length headers, b&m shift kit, and march under drives. Soon to have a 350 in it just need a couple of small parts and it will be ready to go in
	[Reply w/Quote]

03-03-2005, 01:02 AM	#585
jmwxtreme43 www.myspace.com/MINTSICK Age: 25 Join Date: Oct 2003 Posts: 4,531 Location: Kingston, NH User is: OffLine	Re: Post Your 1/4 Times Here! Quote: Originally Posted by cws10blazer 4.3 had 4.10 gears, tbi spacer, headman full length headers, b&m shift kit, and march under drives. Soon to have a 350 in it just need a couple of small parts and it will be ready to go in sounds cool, impressive for a tbi!
	[Reply w/Quote]