Project: Fix to busted CV shafts & wheel bearings! 56k no no

JollyGreenMini · 07-18-2009, 03:43 PM

Tim, that's hardly a Cadillac buddy

But if it means your keeping your truck then badass car man!

Tim99Zr2 · 07-18-2009, 05:01 PM

Quote: Originally Posted by JollyGreenMini

Tim, that's hardly a Cadillac buddy

But if it means your keeping your truck then badass car man!

eh, someone called me about it today. we'll see.

~~Gibson~~ · 07-22-2009, 02:15 AM

ill trade you straight up for my s10, ill even spray bomb it flat black for you.

Tim99Zr2 · 07-22-2009, 06:53 AM

not looking to trade it. dont want another money pit.

~~Gibson~~ · 07-22-2009, 07:41 PM

Quote: Originally Posted by Tim99Zr2

not looking to trade it. dont want another money pit.

fine, ill thought all the body work in too, its in good shape, just needs body work.

Tim99Zr2 · 08-22-2009, 04:18 PM

bought some new shoes. my brother wants to make it street legal and use it for work.

35x12.5x15 yokohoma geo lander m/ts
881.46 mounted. rides like a dream compared to the boggers! quiet tires too.

DieselS10 · 08-22-2009, 10:05 PM

Looks good! Your axles will like those better too.

Tim99Zr2 · 08-23-2009, 12:23 PM

yea, i was hoping they will be easier on my axles. but now its starting to burn oil on the drivers side. i think my gaskets are going

wrekd · 08-24-2009, 01:29 AM

Quote: Originally Posted by Tim99Zr2

yea, i was hoping they will be easier on my axles. but now its starting to burn oil on the drivers side. i think my gaskets are going

Yeah they should be alot easier on your axles. Boggers are a heavy ass tire. Well, any Swamper for that matter.

Change those gaskets. its about $80 and a 3hr job. Cheap insurance.

Tim99Zr2 · 08-24-2009, 05:56 AM

yea, as much as i dont want to, we're going to have to do it.. prob head gaskests and intake gaskets

JollyGreenMini · 08-24-2009, 11:17 AM

Your still gonna have to put a hell of a flare on that to made those legal

Tim99Zr2 · 08-24-2009, 05:10 PM

Quote: Originally Posted by JollyGreenMini

Your still gonna have to put a hell of a flare on that to made those legal

thats why your going to trade me axles.

or im going to look into 6" bedsides and fenders

ChrisInVT · 08-24-2009, 05:35 PM

Quote: Originally Posted by Tim99Zr2

or im going to look into 6" bedsides and fenders

A few years back I saw a CJ runnning around with 35x12.50 duallys front and rear. He was running pickup dually fenders on the front and back, it actually didn't look as bad as it sounds.

Tim99Zr2 · 08-24-2009, 07:45 PM

yea, if i go that route, they will be pre runner bedsides / fenders

Tim99Zr2 · 08-24-2009, 07:51 PM

hey guys, i need new front springs. looking at ranchos rs44044s, what the eye to eye length? or your shackle hanger / leaf spring hanger distance?

dave, what you doing with yours?

wrekd · 08-24-2009, 10:58 PM

Quote: Originally Posted by Tim99Zr2

yea, if i go that route, they will be pre runner bedsides / fenders

Why don't you just make some out of wood

wrekd · 08-24-2009, 11:16 PM

Quote: Originally Posted by Tim99Zr2

dave, what you doing with yours?

I thought you were buying them

Tim, you know anyone that needs a s-10 trans?? If ya do, tell em $100 and you'll pick it up

Seriously though, $100 and its theirs.

JollyGreenMini · 08-25-2009, 11:29 AM

Quote: Originally Posted by Tim99Zr2

thats why your going to trade me axles.
or im going to look into 6" bedsides and fenders

Your's probably would hold up a bit better to a 350hp small block then my 30/35's will

BillaksBlazer · 08-25-2009, 12:37 PM

Quote: Originally Posted by Tim99Zr2

hey guys, i need new front springs. looking at ranchos rs44044s, what the eye to eye length? or your shackle hanger / leaf spring hanger distance?

dave, what you doing with yours?

the springs are 47-48" and my hanger to hanger is 45"

bubbagt57 · 08-25-2009, 05:25 PM

better offset rims?

Tim99Zr2 · 08-25-2009, 09:40 PM

Quote: Originally Posted by wrekd

I thought you were buying them

Tim, you know anyone that needs a s-10 trans?? If ya do, tell em $100 and you'll pick it up

Seriously though, $100 and its theirs.

haha, right.. ill make them out of wood.
ill prob come this weekend sometime. for them. and the tranny is almost tempting, but im bringing my car!

Quote: Originally Posted by JollyGreenMini

Your's probably would hold up a bit better to a 350hp small block then my 30/35's will

perfect, buy my axles. 2000 and it comes with a parts truck

Quote: Originally Posted by BillaksBlazer

the springs are 47-48" and my hanger to hanger is 45"

awesome, thanks.. its what i needed to hear.

Quote: Originally Posted by bubbagt57

better offset rims?

thought about that, but i couldnt get much more backspace, cause then the hub would stick out past the wheel.

holy hell, thats the most replies aver in my thread!

DieselS10 · 08-25-2009, 10:50 PM

I have an off the wall question, how do you reply with multiple quotes?

I'm a little retarded I guess.

Merritt · 08-26-2009, 02:54 AM

copy and paste

Tim99Zr2 · 08-26-2009, 04:33 PM

Quote: Originally Posted by DieselS10

I have an off the wall question, how do you reply with multiple quotes? I'm a little retarded I guess.

i just open a second window of my thread. hit the reply with quote, then just copy that message then paste it in the second copy of the thread. answer it, go back to the first window copy and paste the next one.

uhh. thats confusing!

DieselS10 · 08-26-2009, 10:42 PM

Quote: Originally Posted by Tim99Zr2

i just open a second window of my thread. hit the reply with quote, then just copy that message then paste it in the second copy of the thread. answer it, go back to the first window copy and paste the next one.

uhh. thats confusing!

No, that makes perfect sense. Thanks

Tim99Zr2 · 08-27-2009, 06:38 AM

no problem!

wrekd · 08-27-2009, 10:48 PM

Tim, what day do you plan on coming for those springs??

Tim99Zr2 · 08-27-2009, 10:49 PM

not sure, any one work best for you?

Tim99Zr2 · 08-27-2009, 10:50 PM

and get me the addy WHERE THE SPRINGS ARE AT!!!!
so i dont go an hour outta my way. hah

wrekd · 08-27-2009, 10:52 PM

You got time tomorrow??

Tim99Zr2 · 08-27-2009, 10:54 PM

i should get off work around 10:30 - 11. should be home around noon.

what time? id have all after noon / night.

wrekd · 08-27-2009, 11:00 PM

Well if ya want, leave whenever you get out. I'll be free all day tomorrow. I got a guy from NC coming up to get my axles tomorrow too.

Tim99Zr2 · 08-27-2009, 11:02 PM

ok, yea, ill give you a ring when i get home. and get me the address where the springs are at. pm me it.

wrekd · 08-27-2009, 11:14 PM

I just got off the phone with the guy thats buying my axles. He's actually on his way up now...lol...So I SHOULD have the springs at my house by the time you'll be on your way. So I'll let ya know where they're at when you call me.

Tim99Zr2 · 08-27-2009, 11:18 PM

damn! your buddies house is alot closer! haha

when is he going to get here? thats a long ass drive for axles!

Tim99Zr2 · 08-27-2009, 11:20 PM

and im going to bed. pm me both addys tonight if you can. so i have them for the tom tom

wrekd · 08-27-2009, 11:26 PM

Haha, yeah thats right. I forgot that his house was actually closer...lol

He's driving as far as he can tonight, crashing at a hotel, then driving the rest of the way in the morning. The best part is he's putting the front axle on one of those racks that you stick in your hitch. And the 14 bolt in the back of his Cherokee. I can't fvcking wait to see this circus act

I'll PM you the addy's.

crewcab rabbit · 08-28-2009, 07:50 PM

He's driving as far as he can tonight, crashing at a hotel, then driving the rest of the way in the morning. The best part is he's putting the front axle on one of those racks that you stick in your hitch. And the 14 bolt in the back of his Cherokee. I can't fvcking wait to see this circus act

that should be pretty funny looking but hey what ever works. i put a ff 14bolt in the trunk of my moms 2dr chevy caviler when i was in high school

tight fit but i was tired of blowing up 12bolts in my k5 and the 14bolt was free. plus i was getting tired of driving her car to school . but hey try and get a pic of that circus bumper will probably be on the ground

Tim99Zr2 · 08-28-2009, 07:56 PM

yea no shit, the first bump he hits its gonna tear the hitch right the fvck off. hah

Tim99Zr2 · 08-30-2009, 04:57 PM

got an update... dunno if im

or

Tim99Zr2 · 08-30-2009, 05:05 PM

From this

To this

Then this

And this finally.

let er go for 1500, without the tires. i felt that was a pretty fair price. what ya think? its about to blow up.

Tim99Zr2 · 08-30-2009, 09:51 PM

jeeze. guess no one likes me anymore.

should i stay off this site now?

wrekd · 08-30-2009, 10:01 PM

When you get the cash in hand, its great. But then you come home expecting to see it, thats sad. I miss mine, but I don't miss the headaches it gave me

Tim99Zr2 · 08-30-2009, 10:05 PM

yea, my garage looks empty up back.

but he may be sticking an LS1 in it

wrekd · 08-30-2009, 10:09 PM

Quote: Originally Posted by Tim99Zr2

yea, my garage looks empty up back. but he may be sticking an LS1 in it

So what ya gettin next?? I might be picking up a 93 GMC ??Sierra?? extended cab. Something to haul my quad around with, beat on a little, and probably an SAS in its future...lol... The only thing that sucks about it is its a 305.

Tim99Zr2 · 08-30-2009, 10:11 PM

im putting the money on my bike. i owe 2800 on it yet. then after its paid off, i may try to move into my camp and live there.

wrekd · 08-30-2009, 10:15 PM

You should get a quad

You got a house at your camp?? Or you gonna be living in a tent

Tim99Zr2 · 08-30-2009, 10:23 PM

we got a house at our camp. 1 story, full basement, electirc, heat, water, sewage, out in the country 2 or 3 bed room, one bath, living / kitchen area, fire place. its pretty bad ass

Tim99Zr2 · 08-30-2009, 10:25 PM

and i already got a quad, grizzly 660. i can keep up with sport quads in the woods.

and my buddy and i are toying around the idea of buying side by sides... rzrs or rhinos

wrekd · 08-30-2009, 10:33 PM

Get a Razr. Those things are fvcking sick!! Lift it and put on some 32" Silverbacks (I think thats what they're called)

07-18-2009, 03:43 PM	#1401
JollyGreenMini Still 2 High Age: 24 Join Date: Oct 2001 Posts: 7,253 Location: Brockway, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Tim, that's hardly a Cadillac buddy But if it means your keeping your truck then badass car man!
	[Reply w/Quote]

07-18-2009, 05:01 PM	#1402
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by JollyGreenMini Tim, that's hardly a Cadillac buddy But if it means your keeping your truck then badass car man! eh, someone called me about it today. we'll see.
	[Reply w/Quote]

07-22-2009, 02:15 AM	#1403
~~Gibson~~ Banned Age: 17 Join Date: Nov 2008 Posts: 733 Location: Pittsburgh pa User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no ill trade you straight up for my s10, ill even spray bomb it flat black for you.
	[Reply w/Quote]

07-22-2009, 06:53 AM	#1404
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no not looking to trade it. dont want another money pit.
	[Reply w/Quote]

07-22-2009, 07:41 PM	#1405
~~Gibson~~ Banned Age: 17 Join Date: Nov 2008 Posts: 733 Location: Pittsburgh pa User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by Tim99Zr2 not looking to trade it. dont want another money pit. fine, ill thought all the body work in too, its in good shape, just needs body work.
	[Reply w/Quote]

08-22-2009, 04:18 PM	#1406
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no bought some new shoes. my brother wants to make it street legal and use it for work. 35x12.5x15 yokohoma geo lander m/ts 881.46 mounted. rides like a dream compared to the boggers! quiet tires too.
	[Reply w/Quote]

08-22-2009, 10:05 PM	#1407
DieselS10 Slightly Over Built Age: 35 Join Date: Dec 2007 Posts: 2,225 Location: Chelsea, OK User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Looks good! Your axles will like those better too.
	[Reply w/Quote]

08-23-2009, 12:23 PM	#1408
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no yea, i was hoping they will be easier on my axles. but now its starting to burn oil on the drivers side. i think my gaskets are going
	[Reply w/Quote]

08-24-2009, 01:29 AM	#1409
wrekd Registered User Age: 25 Join Date: Jan 2008 Posts: 2,029 Location: Sugar Notch, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by Tim99Zr2 yea, i was hoping they will be easier on my axles. but now its starting to burn oil on the drivers side. i think my gaskets are going Yeah they should be alot easier on your axles. Boggers are a heavy ass tire. Well, any Swamper for that matter. Change those gaskets. its about $80 and a 3hr job. Cheap insurance.
	[Reply w/Quote]

08-24-2009, 05:56 AM	#1410
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no yea, as much as i dont want to, we're going to have to do it.. prob head gaskests and intake gaskets
	[Reply w/Quote]

08-24-2009, 11:17 AM	#1411
JollyGreenMini Still 2 High Age: 24 Join Date: Oct 2001 Posts: 7,253 Location: Brockway, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Your still gonna have to put a hell of a flare on that to made those legal
	[Reply w/Quote]

08-24-2009, 05:10 PM	#1412
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by JollyGreenMini Your still gonna have to put a hell of a flare on that to made those legal thats why your going to trade me axles. or im going to look into 6" bedsides and fenders
	[Reply w/Quote]

08-24-2009, 05:35 PM	#1413
ChrisInVT I Rather Be Wheelin' Age: 26 Join Date: May 2007 Posts: 4,198 Location: The Woods, VT User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by Tim99Zr2 or im going to look into 6" bedsides and fenders A few years back I saw a CJ runnning around with 35x12.50 duallys front and rear. He was running pickup dually fenders on the front and back, it actually didn't look as bad as it sounds.
	[Reply w/Quote]

08-24-2009, 07:45 PM	#1414
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no yea, if i go that route, they will be pre runner bedsides / fenders
	[Reply w/Quote]

08-24-2009, 07:51 PM	#1415
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no hey guys, i need new front springs. looking at ranchos rs44044s, what the eye to eye length? or your shackle hanger / leaf spring hanger distance? dave, what you doing with yours?
	[Reply w/Quote]

08-24-2009, 10:58 PM	#1416
wrekd Registered User Age: 25 Join Date: Jan 2008 Posts: 2,029 Location: Sugar Notch, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by Tim99Zr2 yea, if i go that route, they will be pre runner bedsides / fenders Why don't you just make some out of wood
	[Reply w/Quote]

08-24-2009, 11:16 PM	#1417
wrekd Registered User Age: 25 Join Date: Jan 2008 Posts: 2,029 Location: Sugar Notch, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by Tim99Zr2 dave, what you doing with yours? I thought you were buying them Tim, you know anyone that needs a s-10 trans?? If ya do, tell em $100 and you'll pick it up Seriously though, $100 and its theirs.
	[Reply w/Quote]

08-25-2009, 11:29 AM	#1418
JollyGreenMini Still 2 High Age: 24 Join Date: Oct 2001 Posts: 7,253 Location: Brockway, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by Tim99Zr2 thats why your going to trade me axles. or im going to look into 6" bedsides and fenders Your's probably would hold up a bit better to a 350hp small block then my 30/35's will
	[Reply w/Quote]

08-25-2009, 12:37 PM	#1419
BillaksBlazer Registered User Join Date: Jan 2009 Posts: 571 Location: User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by Tim99Zr2 hey guys, i need new front springs. looking at ranchos rs44044s, what the eye to eye length? or your shackle hanger / leaf spring hanger distance? dave, what you doing with yours? the springs are 47-48" and my hanger to hanger is 45"
	[Reply w/Quote]

08-25-2009, 05:25 PM	#1420
bubbagt57 GAVE his truck to 96super Age: 19 Join Date: Dec 2007 Posts: 2,290 Location: burtonsville, maryland User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no better offset rims?
	[Reply w/Quote]

08-25-2009, 09:40 PM	#1421
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by wrekd I thought you were buying them Tim, you know anyone that needs a s-10 trans?? If ya do, tell em $100 and you'll pick it up Seriously though, $100 and its theirs. haha, right.. ill make them out of wood. ill prob come this weekend sometime. for them. and the tranny is almost tempting, but im bringing my car! Quote: Originally Posted by JollyGreenMini Your's probably would hold up a bit better to a 350hp small block then my 30/35's will perfect, buy my axles. 2000 and it comes with a parts truck Quote: Originally Posted by BillaksBlazer the springs are 47-48" and my hanger to hanger is 45" awesome, thanks.. its what i needed to hear. Quote: Originally Posted by bubbagt57 better offset rims? thought about that, but i couldnt get much more backspace, cause then the hub would stick out past the wheel. holy hell, thats the most replies aver in my thread!
	[Reply w/Quote]

08-25-2009, 10:50 PM	#1422
DieselS10 Slightly Over Built Age: 35 Join Date: Dec 2007 Posts: 2,225 Location: Chelsea, OK User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no I have an off the wall question, how do you reply with multiple quotes? I'm a little retarded I guess.
	[Reply w/Quote]

08-26-2009, 02:54 AM	#1423
Merritt Registered Abuser Age: 24 Join Date: Dec 2007 Posts: 8,088 Location: King, NC User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no copy and paste
	[Reply w/Quote]

08-26-2009, 04:33 PM	#1424
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by DieselS10 I have an off the wall question, how do you reply with multiple quotes? I'm a little retarded I guess. i just open a second window of my thread. hit the reply with quote, then just copy that message then paste it in the second copy of the thread. answer it, go back to the first window copy and paste the next one. uhh. thats confusing!
	[Reply w/Quote]

08-26-2009, 10:42 PM	#1425
DieselS10 Slightly Over Built Age: 35 Join Date: Dec 2007 Posts: 2,225 Location: Chelsea, OK User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Quote: Originally Posted by Tim99Zr2 i just open a second window of my thread. hit the reply with quote, then just copy that message then paste it in the second copy of the thread. answer it, go back to the first window copy and paste the next one. uhh. thats confusing! No, that makes perfect sense. Thanks
	[Reply w/Quote]

08-27-2009, 06:38 AM	#1426
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no no problem!
	[Reply w/Quote]

08-27-2009, 10:48 PM	#1427
wrekd Registered User Age: 25 Join Date: Jan 2008 Posts: 2,029 Location: Sugar Notch, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Tim, what day do you plan on coming for those springs??
	[Reply w/Quote]

08-27-2009, 10:49 PM	#1428
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no not sure, any one work best for you?
	[Reply w/Quote]

08-27-2009, 10:50 PM	#1429
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no and get me the addy WHERE THE SPRINGS ARE AT!!!! so i dont go an hour outta my way. hah
	[Reply w/Quote]

08-27-2009, 10:52 PM	#1430
wrekd Registered User Age: 25 Join Date: Jan 2008 Posts: 2,029 Location: Sugar Notch, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no You got time tomorrow??
	[Reply w/Quote]

08-27-2009, 10:54 PM	#1431
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no i should get off work around 10:30 - 11. should be home around noon. what time? id have all after noon / night.
	[Reply w/Quote]

08-27-2009, 11:00 PM	#1432
wrekd Registered User Age: 25 Join Date: Jan 2008 Posts: 2,029 Location: Sugar Notch, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no Well if ya want, leave whenever you get out. I'll be free all day tomorrow. I got a guy from NC coming up to get my axles tomorrow too.
	[Reply w/Quote]

08-27-2009, 11:02 PM	#1433
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no ok, yea, ill give you a ring when i get home. and get me the address where the springs are at. pm me it.
	[Reply w/Quote]

08-27-2009, 11:14 PM	#1434
wrekd Registered User Age: 25 Join Date: Jan 2008 Posts: 2,029 Location: Sugar Notch, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no I just got off the phone with the guy thats buying my axles. He's actually on his way up now...lol...So I SHOULD have the springs at my house by the time you'll be on your way. So I'll let ya know where they're at when you call me.
	[Reply w/Quote]

08-27-2009, 11:18 PM	#1435
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,535 Location: Reynoldsville, PA User is: OffLine	Re: Project: Fix to busted CV shafts & wheel bearings! 56k no no damn! your buddies house is alot closer! haha when is he going to get here? thats a long ass drive for axles!
	[Reply w/Quote]