I'm calling her Mia

***philntx*** · 01-09-2009, 01:38 PM

Coming along nicely!

AmericanMuscle · 01-09-2009, 10:29 PM

thanks guys, picked up another 373 posi rear today but this one has disc brakes. i'll be robbing the short axle and the brakes from it for the one that I put in the shop this morning. also got my shocks in for my drop, and a bunch of cleaning supplies.

AmericanMuscle · 01-09-2009, 11:02 PM

Quote: Originally Posted by zx9rgreen

^^^^^ Glad you could use the cluster, Maybe you could pass the favor on to a fellow member with the other one

planning on it, but I cont figure out what year it goes on. dealer said its a discontinued part number, I dont know how else to figure it out.

zx9rgreen · 01-10-2009, 02:07 AM

Quote: Originally Posted by AmericanMuscle

planning on it, but I cont figure out what year it goes on. dealer said its a discontinued part number, I dont know how else to figure it out.

Yea I dunno either

RazorS10 · 01-10-2009, 09:20 AM

Looks good bro.

***What?*** · 01-10-2009, 04:23 PM

right on, looking good, I ought to check it out sometimes

AmericanMuscle · 01-10-2009, 04:50 PM

when it gets running i'll try and make it out to a few local cruz nights. hopefully we could get a few forum members togather.

RazorS10 · 01-10-2009, 11:14 PM

I'm down for that arizona isn't that far away from tejas.

AmericanMuscle · 02-27-2009, 01:05 AM

long overdue update

engine mock up, it was a beautiful sight

got in my headers from headman, long story short I got the long tubes cause the mids weren't done yet. they fit great even let you turn pretty well, unless you want ac. since this is my daily i'll be getting the mids from them intstead. oh and you would need to mod your trans cross member to clear the collectors.

I test fit all the ones on the driver side just don't have pics, you will need to mod your brake lines, it wouldn't be difficult especially compared to the rest of this headache.

oh and in case anyone needed to know jareds cooling setup fits just fine with truck acc. I was pretty worried about those big fans but there is still a bit of clearance.

this last pic gave me some motivation, too bad I have to take it all back out. notch a hair more out of the ac notch, don't need to but it will make me more comfortable. weld it up, bolt in mounts, and put on oil pan. then it will go back in for good. I have some time tomorrow and most of saturday to work on this. sunday I'm going to firebird raceway!

BudRacing · 02-27-2009, 01:11 AM

Looks good. I may have missed it, but are you planning to clean up the frame and suspension at all while it's apart? With all that detail work you've put into the engine it would take the project that much further. Keep up the good work. I'm curious to see how the midlength headers perform.

AmericanMuscle · 02-27-2009, 01:25 AM

Quote: Originally Posted by BudRacing

Looks good. I may have missed it, but are you planning to clean up the frame and suspension at all while it's apart? With all that detail work you've put into the engine it would take the project that much further. Keep up the good work. I'm curious to see how the midlength headers perform.

yes the frame will be cleaned and painted, stock suspension painted with belltech springs and blazer spindles with blazer brakes.

BudRacing · 02-27-2009, 01:41 AM

Nice

chevysten · 02-27-2009, 09:39 PM

Looks very nice.I know how you feel about putting it in and then pulling back out because something is not right!Keep going your getting closer and closer.Good luck.Mike

AmericanMuscle · 02-28-2009, 01:47 AM

Quote: Originally Posted by chevysten

Looks very nice.I know how you feel about putting it in and then pulling back out because something is not right!Keep going your getting closer and closer.Good luck.Mike

I knew shit wasn't going to be right, I put it all in for mockup this time, the ac notch is still open and the mounts arent even bolted in. I had seen a few of you guys put it in thinking you were done and having to redo it, so I did a mock up install first.

AmericanMuscle · 02-28-2009, 03:21 AM

I had the cops called on me tonight, I almost feel like a dick since I was grinding off my bumpstops at 11:30pm, but all they would have had to do was ask me to quiet down and I would have cleaned up. I mean really, why not? I would have stopped when they asked and cops really do have better shit to do. The cop was cool, and he came when I was done and cleaning up. when he left I was really tempted to break out my blackcats bottle rockets, but I didn't want to be a dick to my other neighbors.

s10-den · 02-28-2009, 10:03 AM

Looking GREAT ......
You still going to do the blazer tank conversion?

**Kampz69** · 02-28-2009, 11:54 AM

Quote: Originally Posted by AmericanMuscle

I had the cops called on me tonight, I almost feel like a dick since I was grinding off my bumpstops at 11:30pm, but all they would have had to do was ask me to quiet down and I would have cleaned up. I mean really, why not? I would have stopped when they asked and cops really do have better shit to do. The cop was cool, and he came when I was done and cleaning up. when he left I was really tempted to break out my blackcats bottle rockets, but I didn't want to be a dick to my other neighbors.

wow, thats some BS right there...glad the cop didnt give you a hard time.

AmericanMuscle · 02-28-2009, 12:56 PM

Quote: Originally Posted by s10-den

Looking GREAT ......
You still going to do the blazer tank conversion?

I want to, dont know when I will get around to it though.

BudRacing · 02-28-2009, 05:04 PM

I think I'd call my neighbors after that incident and make sure they had my number before calling the fkn police.

zx9rgreen · 02-28-2009, 08:08 PM

Quote: Originally Posted by AmericanMuscle

I had the cops called on me tonight, I almost feel like a dick since I was grinding off my bumpstops at 11:30pm, but all they would have had to do was ask me to quiet down and I would have cleaned up. I mean really, why not? I would have stopped when they asked and cops really do have better shit to do. The cop was cool, and he came when I was done and cleaning up. when he left I was really tempted to break out my blackcats bottle rockets, but I didn't want to be a dick to my other neighbors.

I am so glad I live where I do.....Stuff like that just pisses me off.

AmericanMuscle · 02-28-2009, 08:38 PM

Quote: Originally Posted by BudRacing

I think I'd call my neighbors after that incident and make sure they had my number before calling the fkn police.

LOL, I'm actually going to go nock on the 3 neighbors (though i'm pretty sure which one it was) and give them my phone # and tell them its much faster just to ask. i was done making noise and was cleaning up by the time the cop got there.

J-3 · 03-03-2009, 04:02 PM

How much clearance between the header/frame do those longtubes have on the passenger side? Just curious because it doesn't look like much.

AmericanMuscle · 03-03-2009, 08:26 PM

they fit tight but clear everything easily. about 1/2 between the fram and headers.

Greg

AmericanMuscle · 03-09-2009, 01:13 AM

well I got a few things done

got my oil pan and pickup tube. I didn't want to renotch the frame, and I didn't want to run a truck pan since I'm dropping her. I broke down and got the lh8 pan(h3a), and now I'm a little more broke. brp has this nifty little thing for a little insurance for sealing to the oil pump.

finally got jareds(currentperformance) cooling setup installed, dont follow the directions, just test fit it and the make your cuts for the mounts. looks great in there though.

I worked and painted and shaved my truck intake, and then I picked this up for a steal.

ls6 intake with ported ls1 throttle body. rails and injectors on the way. still need a waterpump, and the ias and tps for the dbc trottle body, but at least I wont need to wire in the new pedal.

more to come soon, spring break is in a week, I'm taking a day or 2 off work and getting this thing in so my roomate can finish up my wiring.

***CPWire*** · 03-09-2009, 09:26 AM

Quote: Originally Posted by AmericanMuscle

finally got jareds(currentperformance) cooling setup installed, dont follow the directions, just test fit it and the make your cuts for the mounts. looks great in there though.

What was wrong with the directions?
I thought about not having any, but then I would get phone calls wanting to know what to do.

AmericanMuscle · 03-09-2009, 08:03 PM

Quote: Originally Posted by 97 SS 350

What was wrong with the directions?
I thought about not having any, but then I would get phone calls wanting to know what to do.

I used the stock mounts without cutting, and when I measured it out according to the directions it was off. everything else was good. I would just say to test fit the rad instead of cutting the holes with the measurements given.

Alex41 · 03-09-2009, 08:34 PM

Tell me you are going to make that intake just as nice as your truck one, right?

AmericanMuscle · 03-09-2009, 10:26 PM

DOES anyone have the tps or iac sensors or anything else I will need for the dbc throttle body swap?

zx9rgreen · 03-09-2009, 10:32 PM

Quote: Originally Posted by AmericanMuscle

DOES anyone have the tps or iac sensors or anything else I will need for the dbc throttle body swap?

Local parts stores and when I bought the TPS it wasn't expensive. But I dunno about the IAC.

eviltwin_1987 · 03-10-2009, 02:40 AM

iac is like $80

platour22 · 03-10-2009, 02:53 AM

What did you use to clean your valve covers. Got a pic of it.

denali_on_26's · 03-10-2009, 11:30 AM

i should be sending you all the stuff to make you stop alot better today!!

AmericanMuscle · 03-10-2009, 12:05 PM

Quote: Originally Posted by platour22

What did you use to clean your valve covers. Got a pic of it.

roloc discs, i'll post up something about how to do it when I get some time.

RedLsxS10 · 03-10-2009, 12:58 PM

YAY... at least now we will get done about the same time

Good work man.. keep it up

AmericanMuscle · 03-10-2009, 10:32 PM

Quote: Originally Posted by RedLsxS10

YAY... at least now we will get done about the same time

Good work man.. keep it up

let us hope, I have a ton of school to catch up on.

RedLsxS10 · 03-10-2009, 11:02 PM

School > Truck

AmericanMuscle · 03-11-2009, 12:15 AM

Quote: Originally Posted by RedLsxS10

School > Truck

yeah but the truck makes me happier, even when I don't have parts and its in a million peices.

I was ready to throw my damn computer across the room a few minutes ago because of school.

FUCK ENGLISH!

SoLowXtreme · 03-11-2009, 07:11 PM

looks real good man ! !... do u have any more pics of the headers installed?...and in that 1 picture are you turned to lock ?

RedLsxS10 · 03-11-2009, 08:22 PM

Quote: Originally Posted by AmericanMuscle

FxxK ENGLISH!

AmericanMuscle · 03-12-2009, 02:30 PM

Quote: Originally Posted by SoLowXtreme

looks real good man ! !... do u have any more pics of the headers installed?...and in that 1 picture are you turned to lock ?

no more pics, and it was not at lock, but there is a good amount of turning. those wheels are the same dimentions as zq8s.

So-GT0071 · 03-12-2009, 04:00 PM

Lookin great! The engine looks super clean, love what you did with the intake manifold/valve covers. How do you like the fans/radiator from CP? Can you still use the stock condenser in the factory location?

I just realized you live in Tucson..lol. We will definitely have to meet up sometime.

AmericanMuscle · 03-13-2009, 12:26 AM

Quote: Originally Posted by So-GT0071

Lookin great! The engine looks super clean, love what you did with the intake manifold/valve covers. How do you like the fans/radiator from CP? Can you still use the stock condenser in the factory location?

I just realized you live in Tucson..lol. We will definitely have to meet up sometime.

I like the cpw cooling kit alot, there is a condencer that you get with it, you can check it out when we meet up. I'd love to see your truck! I hope to have your suspension setup one day!

AmericanMuscle · 03-27-2009, 01:15 AM

cpw cooling setup done.

frame welded up and plated in(I know the notch is big, but trust me it is solid)

cleaned up the frame and painted the firewall. It turned out as good as I hoped it would!

old stuff removed

to make way for these

I have a few more things done that i'll post up in a few days, i've had no damn time, I wish I wasn't in school right now.

Greg

RazorS10 · 03-27-2009, 09:29 AM

Looking good bro. I will be using the splits as well with the caltracs.

RazorS10 · 03-27-2009, 10:00 AM

How well do those Brp motor mounts work?

AmericanMuscle · 03-27-2009, 12:39 PM

Quote: Originally Posted by RazorS10

How well do those Brp motor mounts work?

they work nice, but they are overpriced, i'll get some installed pics this weekend for everyone.

RazorS10 · 03-27-2009, 12:47 PM

ok i'm not running ac or heat in mine so what all do i need to move to make the hedders work? Also are you dropping the motor in first then stabbing then trans?

denali_on_26's · 03-27-2009, 01:37 PM

Quote: Originally Posted by RazorS10

ok i'm not running ac or heat in mine so what all do i need to move to make the hedders work? Also are you dropping the motor in first then stabbing then trans?

i am running heat\ac and everything fit fine (i have a blazer).... only problem i had was the headers touching the frame i'm am buying a set of mounts and trying it again... i made the first set myself....

so if you are not running heat/ac you should be fine....

how much did all the heat/ac weigh?????

AmericanMuscle · 03-27-2009, 11:29 PM

Quote: Originally Posted by RazorS10

ok i'm not running ac or heat in mine so what all do i need to move to make the hedders work? Also are you dropping the motor in first then stabbing then trans?

pm'ed

trans and engine are going in togather. I already lifted the front of my cab.

2000extemeturbo · 03-28-2009, 12:50 PM

Quote: Originally Posted by AmericanMuscle

old stuff removed

to make way for these

Greg

Just curious as to why you changed the control arms? I thought they were the same from the trucks to blazers.

01-09-2009, 01:38 PM	#101
*philntx* Build them right....Mod Age: 54 Join Date: Jul 2006 Posts: 2,123 Location: Plano TX User is: OffLine	Re: I'm calling her Mia Coming along nicely!
	[Reply w/Quote]

01-09-2009, 10:29 PM	#102
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia thanks guys, picked up another 373 posi rear today but this one has disc brakes. i'll be robbing the short axle and the brakes from it for the one that I put in the shop this morning. also got my shocks in for my drop, and a bunch of cleaning supplies.
	[Reply w/Quote]

01-09-2009, 11:02 PM	#103
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia Quote: Originally Posted by zx9rgreen ^^^^^ Glad you could use the cluster, Maybe you could pass the favor on to a fellow member with the other one planning on it, but I cont figure out what year it goes on. dealer said its a discontinued part number, I dont know how else to figure it out.
	[Reply w/Quote]

01-10-2009, 02:07 AM	#104
zx9rgreen On da bottle Age: 31 Join Date: Aug 2003 Posts: 1,060 Location: Wetumpka, AL User is: OffLine	Re: I'm calling her Mia Quote: Originally Posted by AmericanMuscle planning on it, but I cont figure out what year it goes on. dealer said its a discontinued part number, I dont know how else to figure it out. Yea I dunno either
	[Reply w/Quote]

01-10-2009, 09:20 AM	#105
RazorS10 Registered User Join Date: Mar 2007 Posts: 406 Location: User is: OffLine	Re: I'm calling her Mia Looks good bro.
	[Reply w/Quote]

01-10-2009, 04:23 PM	#106
*What?* Moderator Join Date: Jan 2004 Posts: 17,379 Location: AZ User is: OffLine	Re: I'm calling her Mia right on, looking good, I ought to check it out sometimes
	[Reply w/Quote]

01-10-2009, 04:50 PM	#107
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia when it gets running i'll try and make it out to a few local cruz nights. hopefully we could get a few forum members togather.
	[Reply w/Quote]

01-10-2009, 11:14 PM	#108
RazorS10 Registered User Join Date: Mar 2007 Posts: 406 Location: User is: OffLine	Re: I'm calling her Mia I'm down for that arizona isn't that far away from tejas.
	[Reply w/Quote]

02-27-2009, 01:05 AM	#109
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia long overdue update engine mock up, it was a beautiful sight got in my headers from headman, long story short I got the long tubes cause the mids weren't done yet. they fit great even let you turn pretty well, unless you want ac. since this is my daily i'll be getting the mids from them intstead. oh and you would need to mod your trans cross member to clear the collectors. I test fit all the ones on the driver side just don't have pics, you will need to mod your brake lines, it wouldn't be difficult especially compared to the rest of this headache. oh and in case anyone needed to know jareds cooling setup fits just fine with truck acc. I was pretty worried about those big fans but there is still a bit of clearance. this last pic gave me some motivation, too bad I have to take it all back out. notch a hair more out of the ac notch, don't need to but it will make me more comfortable. weld it up, bolt in mounts, and put on oil pan. then it will go back in for good. I have some time tomorrow and most of saturday to work on this. sunday I'm going to firebird raceway! Last edited by AmericanMuscle : 02-27-2009 at 01:09 AM.
	[Reply w/Quote]

02-27-2009, 01:11 AM	#110
BudRacing Molon Labe Age: 23 Join Date: Aug 2004 Posts: 4,924 Location: Statesboro, Ga User is: OffLine	Re: I'm calling her Mia Looks good. I may have missed it, but are you planning to clean up the frame and suspension at all while it's apart? With all that detail work you've put into the engine it would take the project that much further. Keep up the good work. I'm curious to see how the midlength headers perform.
	[Reply w/Quote]

02-27-2009, 01:25 AM	#111
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia Quote: Originally Posted by BudRacing Looks good. I may have missed it, but are you planning to clean up the frame and suspension at all while it's apart? With all that detail work you've put into the engine it would take the project that much further. Keep up the good work. I'm curious to see how the midlength headers perform. yes the frame will be cleaned and painted, stock suspension painted with belltech springs and blazer spindles with blazer brakes.
	[Reply w/Quote]

02-27-2009, 01:41 AM	#112
BudRacing Molon Labe Age: 23 Join Date: Aug 2004 Posts: 4,924 Location: Statesboro, Ga User is: OffLine	Re: I'm calling her Mia Nice
	[Reply w/Quote]

02-27-2009, 09:39 PM	#113
chevysten Registered User Age: 45 Join Date: Dec 2007 Posts: 522 Location: Huffman TX User is: OffLine	Re: I'm calling her Mia Looks very nice.I know how you feel about putting it in and then pulling back out because something is not right!Keep going your getting closer and closer.Good luck.Mike
	[Reply w/Quote]

02-28-2009, 01:47 AM	#114
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia Quote: Originally Posted by chevysten Looks very nice.I know how you feel about putting it in and then pulling back out because something is not right!Keep going your getting closer and closer.Good luck.Mike I knew shit wasn't going to be right, I put it all in for mockup this time, the ac notch is still open and the mounts arent even bolted in. I had seen a few of you guys put it in thinking you were done and having to redo it, so I did a mock up install first.
	[Reply w/Quote]

02-28-2009, 03:21 AM	#115
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia I had the cops called on me tonight, I almost feel like a dick since I was grinding off my bumpstops at 11:30pm, but all they would have had to do was ask me to quiet down and I would have cleaned up. I mean really, why not? I would have stopped when they asked and cops really do have better shit to do. The cop was cool, and he came when I was done and cleaning up. when he left I was really tempted to break out my blackcats bottle rockets, but I didn't want to be a dick to my other neighbors.
	[Reply w/Quote]

02-28-2009, 10:03 AM	#116
s10-den takes 2 balls in our game Age: 37 Join Date: Nov 2005 Posts: 4,416 Location: florida User is: OffLine	Re: I'm calling her Mia Looking GREAT ...... You still going to do the blazer tank conversion? Last edited by s10-den : 02-28-2009 at 10:05 AM.
	[Reply w/Quote]

02-28-2009, 11:54 AM	#117
Kampz69 Need LSx swap..... Age: 31 Join Date: Feb 2002 Posts: 2,074 Location: SW Chicago burbs User is: OffLine	Re: I'm calling her Mia Quote: Originally Posted by AmericanMuscle I had the cops called on me tonight, I almost feel like a dick since I was grinding off my bumpstops at 11:30pm, but all they would have had to do was ask me to quiet down and I would have cleaned up. I mean really, why not? I would have stopped when they asked and cops really do have better shit to do. The cop was cool, and he came when I was done and cleaning up. when he left I was really tempted to break out my blackcats bottle rockets, but I didn't want to be a dick to my other neighbors. wow, thats some BS right there...glad the cop didnt give you a hard time.
	[Reply w/Quote]

02-28-2009, 12:56 PM	#118
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia Quote: Originally Posted by s10-den Looking GREAT ...... You still going to do the blazer tank conversion? I want to, dont know when I will get around to it though.
	[Reply w/Quote]

02-28-2009, 05:04 PM	#119
BudRacing Molon Labe Age: 23 Join Date: Aug 2004 Posts: 4,924 Location: Statesboro, Ga User is: OffLine	Re: I'm calling her Mia I think I'd call my neighbors after that incident and make sure they had my number before calling the fkn police.
	[Reply w/Quote]

02-28-2009, 08:08 PM	#120
zx9rgreen On da bottle Age: 31 Join Date: Aug 2003 Posts: 1,060 Location: Wetumpka, AL User is: OffLine	Re: I'm calling her Mia Quote: Originally Posted by AmericanMuscle I had the cops called on me tonight, I almost feel like a dick since I was grinding off my bumpstops at 11:30pm, but all they would have had to do was ask me to quiet down and I would have cleaned up. I mean really, why not? I would have stopped when they asked and cops really do have better shit to do. The cop was cool, and he came when I was done and cleaning up. when he left I was really tempted to break out my blackcats bottle rockets, but I didn't want to be a dick to my other neighbors. I am so glad I live where I do.....Stuff like that just pisses me off.
	[Reply w/Quote]

02-28-2009, 08:38 PM	#121
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia Quote: Originally Posted by BudRacing I think I'd call my neighbors after that incident and make sure they had my number before calling the fkn police. LOL, I'm actually going to go nock on the 3 neighbors (though i'm pretty sure which one it was) and give them my phone # and tell them its much faster just to ask. i was done making noise and was cleaning up by the time the cop got there.
	[Reply w/Quote]

03-03-2009, 04:02 PM	#122
J-3 Registered User Age: 21 Join Date: Feb 2009 Posts: 42 Location: User is: OffLine	Re: I'm calling her Mia How much clearance between the header/frame do those longtubes have on the passenger side? Just curious because it doesn't look like much.
	[Reply w/Quote]

03-03-2009, 08:26 PM	#123
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia they fit tight but clear everything easily. about 1/2 between the fram and headers. Greg
	[Reply w/Quote]

03-09-2009, 01:13 AM	#124
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	she's slowly coming along well I got a few things done got my oil pan and pickup tube. I didn't want to renotch the frame, and I didn't want to run a truck pan since I'm dropping her. I broke down and got the lh8 pan(h3a), and now I'm a little more broke. brp has this nifty little thing for a little insurance for sealing to the oil pump. finally got jareds(currentperformance) cooling setup installed, dont follow the directions, just test fit it and the make your cuts for the mounts. looks great in there though. I worked and painted and shaved my truck intake, and then I picked this up for a steal. ls6 intake with ported ls1 throttle body. rails and injectors on the way. still need a waterpump, and the ias and tps for the dbc trottle body, but at least I wont need to wire in the new pedal. more to come soon, spring break is in a week, I'm taking a day or 2 off work and getting this thing in so my roomate can finish up my wiring. Last edited by AmericanMuscle : 03-09-2009 at 01:17 AM.
	[Reply w/Quote]

03-09-2009, 09:26 AM	#125
*CPWire* Makin Sparks Age: 31 Join Date: Jun 2002 Posts: 1,206 Location: Hudson, Florida User is: OffLine	Re: she's slowly coming along Quote: Originally Posted by AmericanMuscle finally got jareds(currentperformance) cooling setup installed, dont follow the directions, just test fit it and the make your cuts for the mounts. looks great in there though. What was wrong with the directions? I thought about not having any, but then I would get phone calls wanting to know what to do.
	[Reply w/Quote]

03-09-2009, 08:03 PM	#126
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: she's slowly coming along Quote: Originally Posted by 97 SS 350 What was wrong with the directions? I thought about not having any, but then I would get phone calls wanting to know what to do. I used the stock mounts without cutting, and when I measured it out according to the directions it was off. everything else was good. I would just say to test fit the rad instead of cutting the holes with the measurements given.
	[Reply w/Quote]

03-09-2009, 08:34 PM	#127
Alex41 Registered User Join Date: Jan 2009 Posts: 101 Location: Biloxi MS User is: OffLine	Re: I'm calling her Mia Tell me you are going to make that intake just as nice as your truck one, right?
	[Reply w/Quote]

03-09-2009, 10:26 PM	#128
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia DOES anyone have the tps or iac sensors or anything else I will need for the dbc throttle body swap?
	[Reply w/Quote]

03-09-2009, 10:32 PM	#129
zx9rgreen On da bottle Age: 31 Join Date: Aug 2003 Posts: 1,060 Location: Wetumpka, AL User is: OffLine	Re: I'm calling her Mia Quote: Originally Posted by AmericanMuscle DOES anyone have the tps or iac sensors or anything else I will need for the dbc throttle body swap? Local parts stores and when I bought the TPS it wasn't expensive. But I dunno about the IAC.
	[Reply w/Quote]

03-10-2009, 02:40 AM	#130
eviltwin_1987 Registered User Join Date: Feb 2009 Posts: 23 Location: User is: OffLine	Re: I'm calling her Mia iac is like $80
	[Reply w/Quote]

03-10-2009, 02:53 AM	#131
platour22 no more blazer Age: 28 Join Date: Feb 2007 Posts: 2,110 Location: Prattville, AL User is: OffLine	Re: I'm calling her Mia What did you use to clean your valve covers. Got a pic of it.
	[Reply w/Quote]

03-10-2009, 11:30 AM	#132
denali_on_26's i like (.)(.) & \'/ Join Date: Aug 2008 Posts: 633 Location: hattiesburg, MS User is: OffLine	Re: I'm calling her Mia i should be sending you all the stuff to make you stop alot better today!!
	[Reply w/Quote]

03-10-2009, 12:05 PM	#133
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia Quote: Originally Posted by platour22 What did you use to clean your valve covers. Got a pic of it. roloc discs, i'll post up something about how to do it when I get some time.
	[Reply w/Quote]

03-10-2009, 12:58 PM	#134
RedLsxS10 a.k.a Matt Age: 25 Join Date: Jul 2007 Posts: 206 Location: Eau Claire, Wisconsin User is: OffLine	Re: I'm calling her Mia YAY... at least now we will get done about the same time Good work man.. keep it up
	[Reply w/Quote]

03-10-2009, 10:32 PM	#135
AmericanMuscle its just greg Age: 23 Join Date: Dec 2005 Posts: 1,599 Location: az User is: OffLine	Re: I'm calling her Mia Quote: Originally Posted by RedLsxS10 YAY... at least now we will get done about the same time Good work man.. keep it up let us hope, I have a ton of school to catch up on.
	[Reply w/Quote]