5/6 drop

revned2008 · 08-25-2008, 01:52 AM

i am wanting to drop my 91 Sonoma with a 4.3L V6 to a 5/6 drop and i was wondering what you guys have and kinda of prices you can hook me up with. Thanks

~~AVS_KRIS~~ · 08-25-2008, 02:41 PM

$450

Front: Coils/spindles
Rear: Leaf Springs/blocks

revned2008 · 08-25-2008, 07:33 PM

how much would it cost

~~AVS_KRIS~~ · 08-25-2008, 07:49 PM

Quote: Originally Posted by AVS_KRIS

$450

Front: Coils/spindles
Rear: Leaf Springs/blocks

^^^^

sonomanator · 08-25-2008, 08:00 PM

kris what do you need to do a 5/6 do you have to notch the frame? with x rims and stock size tires btw.

~~AVS_KRIS~~ · 08-25-2008, 08:07 PM

Quote: Originally Posted by sonomanator

kris what do you need to do a 5/6 do you have to notch the frame? with x rims and stock size tires btw.

S10s do not require a notch but it is nice to have. We do have a universal bolt in notch for $60

You can run stocks on a 40s and still be able to turn and what not

sonomanator · 08-25-2008, 08:45 PM

cool what about 40s do you mean 40 series tires?

~~AVS_KRIS~~ · 08-25-2008, 09:00 PM

my99s10 · 08-25-2008, 09:38 PM

Quote: Originally Posted by AVS_KRIS

yup

i ran 225/50-15's! and didnt have a problem at all! with a 5/6 drop
i also didnt run a notch, i do recomend it thow!! it is rough! and i had belltech drop shocks all around too!!

greencactus3 · 08-25-2008, 09:41 PM

all trucks are different, but my truck sat like this at a 6" rear drop

so yes, a notch was a must for me

my99s10 · 08-25-2008, 09:48 PM

Quote: Originally Posted by greencactus3

all trucks are different, but my truck sat like this at a 6" rear drop

so yes, a notch was a must for me

thats exactly how mine sat too! i went with the 8" s10 step notch from suicidedoors.com! then i had plenty of travel and it seemed to have set a little lower after cause the rear end had room to move!

sonomanator · 08-26-2008, 12:37 AM

cool i may be doing this when i get paid. kris is the bolt on notch on the website i cant seem to find it.

my99s10 · 08-26-2008, 06:33 AM

Quote: Originally Posted by sonomanator

cool i may be doing this when i get paid. kris is the bolt on notch on the website i cant seem to find it.

just go with a weld in notch, there not that expensive at all! i got mine for 80$ off suicidedoors.com and i see her has weld in notches on his site for 100$ and they are under the bed nothces, not sure if there for s10s thow.?.? but weld in is nice

sonomanator · 08-26-2008, 12:01 PM

my welder sucks and it seems like it may take longer to weld it in.

~~AVS_KRIS~~ · 08-26-2008, 12:21 PM

Quote: Originally Posted by sonomanator

my welder sucks and it seems like it may take longer to weld it in.

I havent added it yet...ill price match if you want the weld in...the under the bed notch is only good for 88-06 GM trucks

sonomanator · 08-26-2008, 01:32 PM

i may do weld in i take it you just do a continuous weld ive never welded frames before.

08-25-2008, 01:52 AM	#1
revned2008 Registered User Join Date: Aug 2008 Posts: 50 Location: User is: OffLine	5/6 drop i am wanting to drop my 91 Sonoma with a 4.3L V6 to a 5/6 drop and i was wondering what you guys have and kinda of prices you can hook me up with. Thanks
	[Reply w/Quote]

08-25-2008, 02:41 PM	#2
~~AVS_KRIS~~ Kris Age: 22 Join Date: Dec 2005 Posts: 3,181 Location: FRESNO,CA User is: OffLine	Re: 5/6 drop $450 Front: Coils/spindles Rear: Leaf Springs/blocks
	[Reply w/Quote]

08-25-2008, 07:33 PM	#3
revned2008 Registered User Join Date: Aug 2008 Posts: 50 Location: User is: OffLine	Re: 5/6 drop how much would it cost
	[Reply w/Quote]

08-25-2008, 07:49 PM	#4
~~AVS_KRIS~~ Kris Age: 22 Join Date: Dec 2005 Posts: 3,181 Location: FRESNO,CA User is: OffLine	Re: 5/6 drop Quote: Originally Posted by AVS_KRIS $450 Front: Coils/spindles Rear: Leaf Springs/blocks ^^^^
	[Reply w/Quote]

08-25-2008, 08:00 PM	#5
sonomanator Registered User Age: 19 Join Date: Jan 2008 Posts: 1,991 Location: User is: Online	Re: 5/6 drop kris what do you need to do a 5/6 do you have to notch the frame? with x rims and stock size tires btw.
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

08-25-2008, 08:07 PM	#6
~~AVS_KRIS~~ Kris Age: 22 Join Date: Dec 2005 Posts: 3,181 Location: FRESNO,CA User is: OffLine	Re: 5/6 drop Quote: Originally Posted by sonomanator kris what do you need to do a 5/6 do you have to notch the frame? with x rims and stock size tires btw. S10s do not require a notch but it is nice to have. We do have a universal bolt in notch for $60 You can run stocks on a 40s and still be able to turn and what not
	[Reply w/Quote]

08-25-2008, 08:45 PM	#7
sonomanator Registered User Age: 19 Join Date: Jan 2008 Posts: 1,991 Location: User is: Online	Re: 5/6 drop cool what about 40s do you mean 40 series tires?
	[Reply w/Quote]

08-25-2008, 09:00 PM	#8
~~AVS_KRIS~~ Kris Age: 22 Join Date: Dec 2005 Posts: 3,181 Location: FRESNO,CA User is: OffLine	Re: 5/6 drop yup
	[Reply w/Quote]

08-25-2008, 09:38 PM	#9
my99s10 Below Radar Age: 22 Join Date: Dec 2004 Posts: 51 Location: Lebanon, Maine User is: OffLine	Re: 5/6 drop Quote: Originally Posted by AVS_KRIS yup i ran 225/50-15's! and didnt have a problem at all! with a 5/6 drop i also didnt run a notch, i do recomend it thow!! it is rough! and i had belltech drop shocks all around too!!
	[Reply w/Quote]

08-25-2008, 09:41 PM	#10
greencactus3 bellcranks no more Age: 21 Join Date: Nov 2005 Posts: 23,033 Location: ann arbor, mi User is: OffLine	Re: 5/6 drop all trucks are different, but my truck sat like this at a 6" rear drop so yes, a notch was a must for me
	[Reply w/Quote]

08-25-2008, 09:48 PM	#11
my99s10 Below Radar Age: 22 Join Date: Dec 2004 Posts: 51 Location: Lebanon, Maine User is: OffLine	Re: 5/6 drop Quote: Originally Posted by greencactus3 all trucks are different, but my truck sat like this at a 6" rear drop so yes, a notch was a must for me thats exactly how mine sat too! i went with the 8" s10 step notch from suicidedoors.com! then i had plenty of travel and it seemed to have set a little lower after cause the rear end had room to move!
	[Reply w/Quote]

08-26-2008, 12:37 AM	#12
sonomanator Registered User Age: 19 Join Date: Jan 2008 Posts: 1,991 Location: User is: Online	Re: 5/6 drop cool i may be doing this when i get paid. kris is the bolt on notch on the website i cant seem to find it.
	[Reply w/Quote]

08-26-2008, 06:33 AM	#13
my99s10 Below Radar Age: 22 Join Date: Dec 2004 Posts: 51 Location: Lebanon, Maine User is: OffLine	Re: 5/6 drop Quote: Originally Posted by sonomanator cool i may be doing this when i get paid. kris is the bolt on notch on the website i cant seem to find it. just go with a weld in notch, there not that expensive at all! i got mine for 80$ off suicidedoors.com and i see her has weld in notches on his site for 100$ and they are under the bed nothces, not sure if there for s10s thow.?.? but weld in is nice
	[Reply w/Quote]

08-26-2008, 12:01 PM	#14
sonomanator Registered User Age: 19 Join Date: Jan 2008 Posts: 1,991 Location: User is: Online	Re: 5/6 drop my welder sucks and it seems like it may take longer to weld it in.
	[Reply w/Quote]

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

08-26-2008, 12:21 PM	#15
~~AVS_KRIS~~ Kris Age: 22 Join Date: Dec 2005 Posts: 3,181 Location: FRESNO,CA User is: OffLine	Re: 5/6 drop Quote: Originally Posted by sonomanator my welder sucks and it seems like it may take longer to weld it in. I havent added it yet...ill price match if you want the weld in...the under the bed notch is only good for 88-06 GM trucks
	[Reply w/Quote]

08-26-2008, 01:32 PM	#16
sonomanator Registered User Age: 19 Join Date: Jan 2008 Posts: 1,991 Location: User is: Online	Re: 5/6 drop i may do weld in i take it you just do a continuous weld ive never welded frames before.
	[Reply w/Quote]