1st gen Blazers; post pics here

TrYiN2LaYaDiMe · 06-15-2007, 01:54 AM

there ya go loensloe

lohenslohe · 06-15-2007, 04:14 AM

Quote: Originally Posted by TrYiN2LaYaDiMe

there ya go loensloe

now that is definately TITS!!!!!!! I'm gonna hit up Auto Zone tomorrow and see if they got that. Save me a lot of trouble with the license light too.good lookin out man.

2low2tow93 · 06-15-2007, 05:49 AM

Quote: Originally Posted by lohenslohe

now that is definately TITS!!!!!!! the license light too.

...did you ever get your pass door open?

lohenslohe · 06-15-2007, 09:58 AM

Quote: Originally Posted by 2low2tow93

...did you ever get your pass door open?

no, haven't really touched it since then. Finals are around the corner so I'm taking care of that, registration is today too. Mainly just taking care of school and then on break I'm going to take the fender off, then the door hinges, and unbolt the striker (asked my step-brother to help me out on this one). Also might be getting some reg. doors for the shaved ones.

How do you have your rear set-up again? I know it's static w/4" blocks. It sits lower than mine though and I have 15" rims.

2low2tow93 · 06-15-2007, 03:05 PM

Quote: Originally Posted by lohenslohe

no, haven't really touched it since then. Finals are around the corner so I'm taking care of that, registration is today too. Mainly just taking care of school and then on break I'm going to take the fender off, then the door hinges, and unbolt the striker (asked my step-brother to help me out on this one). Also might be getting some reg. doors for the shaved ones.

How do you have your rear set-up again? I know it's static w/4" blocks. It sits lower than mine though and I have 15" rims.

i have my bottom 2 leafs flipped to the top and 3" blocks and the SD blazer notch...i couldnt get my doors open once and i was sittin on the console kicked the door tryin to get it open turned out the doors got locked when i put the door panels on lol

h8nbmps04 · 06-15-2007, 05:12 PM

Quote: Originally Posted by streetdreams420

couple new pics to throw up got the rear all welded up and the sheetmetal floor done and getting started on the interior

fabbed a few crossmember's and mounted new tanks

1"by1" frame for the sheetmetal frloor

raised the tubs to the window for 22's and new fuel cell

dash and etc started

hey congrats on making in minitruckin readers rides.blazer looks badass keep us updated

streetdreams420 · 06-15-2007, 05:25 PM

thanks bro and i'm sure i'll throw up a few more pics as i go along

lohenslohe · 06-15-2007, 06:34 PM

Quote: Originally Posted by 2low2tow93

i have my bottom 2 leafs flipped to the top and 3" blocks and the SD blazer notch...i couldnt get my doors open once and i was sittin on the console kicked the door tryin to get it open turned out the doors got locked when i put the door panels on lol

lol, dumbass. Mine is the latch no doubt. I remeber hearing something clunk or ping within the door, my take on it is something may have gotten stuck in the latch part when I closed it (lol, now I'm an even more dumbass).

When you say flipped, you just turn the leaf upside down right? I have 2 leafs too, but with a 4" block. Want to try that out w/ the SD bolt notch and see if it works for me. If I bag the rear with a air over leaf, would there be some confrontation with the bag and leaf (would the bags be fighting the leafs)?

2low2tow93 · 06-15-2007, 10:31 PM

Quote: Originally Posted by lohenslohe

lol, dumbass. Mine is the latch no doubt. I remeber hearing something clunk or ping within the door, my take on it is something may have gotten stuck in the latch part when I closed it (lol, now I'm an even more dumbass).

When you say flipped, you just turn the leaf upside down right? I have 2 leafs too, but with a 4" block. Want to try that out w/ the SD bolt notch and see if it works for me. If I bag the rear with a air over leaf, would there be some confrontation with the bag and leaf (would the bags be fighting the leafs)?

lol ya i felt really ****in retarded...i pulled the spring pack apart and took the two bottom leafs and put them on top where the arch was goin towards the frame and took a c clamp to compress them then put the pin back in...i cut the bumpstop brackets off and it layed on the frame then put the notch in and its really close to the notch

jps2345 · 06-16-2007, 12:50 PM

Quote: Originally Posted by TrYiN2LaYaDiMe

that over head console looks good except that broke door. but i guess fat phil did that huh.

ROLL TIDE.

Nah, thats just the light cover, didnt have it in when I snapped that pic, cause I had just gotten it all wired up and in. I still have to get the exterior temp sensor to make the display work correctly, But its all there now. It didnt follow the contours of the roof perfectly, there are 2 gaps total one at the front and one at the rear. They will disappear when I redo the headliner, Ill just mark it and make the foam a little thicker in those areas so that it will close up any gaps. I did have to cut a hole in the backer on my headliner to allow the wires to go though, I used the existing map light power for the 4 map lights in the OHC and the auto dimming mirrow and just wired up the Dome to the existing dome light. Also, had to cut off a small 2" tab that is near the front of the console.

needycase · 06-17-2007, 06:58 PM

Quote: Originally Posted by chvys10

where did u get the intake from??

Got mine on Ebay. Very nice quality, fits well. 50 bucks or so.

2low2tow93 · 06-17-2007, 07:39 PM

heres another pic...the back looks like its a mile off the ground lol

h8nbmps04 · 06-19-2007, 12:21 AM

here is a couple updated pix i took yesterday.new bumper and grille.i took it for a ride dragged it a little and then.........the water punp went.everytime i decide i want to work on it something breaks

TrYiN2LaYaDiMe · 06-19-2007, 01:23 AM

looks good man. i like the tubs and ya the water pump aint no thang 30 bucks and u can do it in about 30 minutes.

whatsize rims u running damn there is a huge differance in them.
how big is ur tunnel area for ur drive shaft.

h8nbmps04 · 06-19-2007, 02:37 PM

thanx man the wheels are a 17/18 combo.i think its the tire size that makes em look way off.im running a stock driveshaft tunnel

cjlgarage · 06-19-2007, 06:56 PM

Quote: Originally Posted by h8nbmps04

thanx man the wheels are a 17/18 combo.i think its the tire size that makes em look way off.im running a stock driveshaft tunnel

MAN IS THAT TRUCK ON MAUTOFIED STILL

lohenslohe · 06-19-2007, 10:41 PM

Quote: Originally Posted by 2low2tow93

heres another pic...the back looks like its a mile off the ground lol

lol, damn your tires are like balloons!!

got bored as all hell today after my first final, took off the light and a/c panels to color em. Did them up in flat black for now till I can get my paycheck and hopefully spray them with

some green.

h8nbmps04 · 06-20-2007, 04:21 AM

Quote: Originally Posted by cjlgarage

MAN IS THAT TRUCK ON MAUTOFIED STILL

yes it is.it will more than likely never leave me...unfortunatly

2low2tow93 · 06-20-2007, 04:57 AM

Quote: Originally Posted by lohenslohe

lol, damn your tires are like balloons!!
got bored as all hell today after my first final, took off the light and a/c panels to color em. Did them up in flat black for now till I can get my paycheck and hopefully spray them with some green.

lol ya...they're huge...my pretty much my whole dash is gloss black and i shaved that indention on the glove box...im thinkin bout glassin my dash and doin it black but i dunna i really dont like any of the 1st gen dash's

TrYiN2LaYaDiMe · 06-20-2007, 08:02 PM

Quote: Originally Posted by 2low2tow93

lol ya...they're huge...my pretty much my whole dash is gloss black and i shaved that indention on the glove box...im thinkin bout glassin my dash and doin it black but i dunna i really dont like any of the 1st gen dash's

do a cavy dash like this guy has. i know they make a full glass one from a grand am.

93blazer4dr · 06-20-2007, 08:45 PM

heres my new custom dash
http://i91.photobucket.com/albums/k2...inblazer-1.jpg

streetdreams420 · 06-20-2007, 09:12 PM

sweet dash bro, gonna look sweet when she's finished

2low2tow93 · 06-21-2007, 07:17 AM

Quote: Originally Posted by TrYiN2LaYaDiMe

do a cavy dash like this guy has. i know they make a full glass one from a grand am.

im not sure what i wanna do with it,kinda wanted to do that at first but ive seen several with a cavy dash im kinda leanin towards a sheet metal but i dunna

oxsign · 06-21-2007, 08:38 AM

Quote: Originally Posted by 93blazer4dr

heres my new custom dash

I like the look of that. Good job.

cjlgarage · 06-21-2007, 03:58 PM

Quote: Originally Posted by h8nbmps04

yes it is.it will more than likely never leave me...unfortunatly

u got the tub fixed hows yhe rear set up

miniblazer · 06-21-2007, 06:41 PM

i know i aighnt got shit on a few of these but heres mine.

93blazer4dr · 06-21-2007, 06:43 PM

Quote: Originally Posted by oxsign

I like the look of that. Good job.

thanks and the steering wheel will be up higher and im going with a classic steering wheel to go with the dash it took alot of work to cut it down section the middel of it and weld everything back still got some more welding but for the most part its done

lohenslohe · 06-21-2007, 08:07 PM

Quote: Originally Posted by miniblazer

i know i aighnt got shit on a few of these but heres mine.

it's a start. what you planning for it? or have already in it?

93blazer4dr · 06-21-2007, 09:00 PM

miniblazer nice truck i love 4drs but there are getting to be way to many good luck on your truck

06-15-2007, 01:54 AM	#401
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,860 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: 1st gen Blazers; post pics here there ya go loensloe
	[Reply w/Quote]

06-15-2007, 04:14 AM	#402
lohenslohe Day Dreamin Age: 27 Join Date: Dec 2005 Posts: 1,944 Location: User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by TrYiN2LaYaDiMe there ya go loensloe now that is definately TITS!!!!!!! I'm gonna hit up Auto Zone tomorrow and see if they got that. Save me a lot of trouble with the license light too.good lookin out man.
	[Reply w/Quote]

06-15-2007, 05:49 AM	#403
2low2tow93 Registered User Age: 21 Join Date: Feb 2006 Posts: 597 Location: Knoxville,TN User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by lohenslohe now that is definately TITS!!!!!!! the license light too. ...did you ever get your pass door open?
	[Reply w/Quote]

06-15-2007, 09:58 AM	#404
lohenslohe Day Dreamin Age: 27 Join Date: Dec 2005 Posts: 1,944 Location: User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by 2low2tow93 ...did you ever get your pass door open? no, haven't really touched it since then. Finals are around the corner so I'm taking care of that, registration is today too. Mainly just taking care of school and then on break I'm going to take the fender off, then the door hinges, and unbolt the striker (asked my step-brother to help me out on this one). Also might be getting some reg. doors for the shaved ones. How do you have your rear set-up again? I know it's static w/4" blocks. It sits lower than mine though and I have 15" rims.
	[Reply w/Quote]

06-15-2007, 03:05 PM	#405
2low2tow93 Registered User Age: 21 Join Date: Feb 2006 Posts: 597 Location: Knoxville,TN User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by lohenslohe no, haven't really touched it since then. Finals are around the corner so I'm taking care of that, registration is today too. Mainly just taking care of school and then on break I'm going to take the fender off, then the door hinges, and unbolt the striker (asked my step-brother to help me out on this one). Also might be getting some reg. doors for the shaved ones. How do you have your rear set-up again? I know it's static w/4" blocks. It sits lower than mine though and I have 15" rims. i have my bottom 2 leafs flipped to the top and 3" blocks and the SD blazer notch...i couldnt get my doors open once and i was sittin on the console kicked the door tryin to get it open turned out the doors got locked when i put the door panels on lol
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

06-15-2007, 05:12 PM	#406
h8nbmps04 dragginby Age: 31 Join Date: Apr 2004 Posts: 517 Location: south jersey User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by streetdreams420 couple new pics to throw up got the rear all welded up and the sheetmetal floor done and getting started on the interior fabbed a few crossmember's and mounted new tanks 1"by1" frame for the sheetmetal frloor raised the tubs to the window for 22's and new fuel cell dash and etc started hey congrats on making in minitruckin readers rides.blazer looks badass keep us updated
	[Reply w/Quote]

06-15-2007, 05:25 PM	#407
streetdreams420 streetswepa Age: 29 Join Date: Jul 2003 Posts: 620 Location: milton ontario User is: OffLine	Re: 1st gen Blazers; post pics here thanks bro and i'm sure i'll throw up a few more pics as i go along
	[Reply w/Quote]

06-15-2007, 06:34 PM	#408
lohenslohe Day Dreamin Age: 27 Join Date: Dec 2005 Posts: 1,944 Location: User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by 2low2tow93 i have my bottom 2 leafs flipped to the top and 3" blocks and the SD blazer notch...i couldnt get my doors open once and i was sittin on the console kicked the door tryin to get it open turned out the doors got locked when i put the door panels on lol lol, dumbass. Mine is the latch no doubt. I remeber hearing something clunk or ping within the door, my take on it is something may have gotten stuck in the latch part when I closed it (lol, now I'm an even more dumbass). When you say flipped, you just turn the leaf upside down right? I have 2 leafs too, but with a 4" block. Want to try that out w/ the SD bolt notch and see if it works for me. If I bag the rear with a air over leaf, would there be some confrontation with the bag and leaf (would the bags be fighting the leafs)?
	[Reply w/Quote]

06-15-2007, 10:31 PM	#409
2low2tow93 Registered User Age: 21 Join Date: Feb 2006 Posts: 597 Location: Knoxville,TN User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by lohenslohe lol, dumbass. Mine is the latch no doubt. I remeber hearing something clunk or ping within the door, my take on it is something may have gotten stuck in the latch part when I closed it (lol, now I'm an even more dumbass). When you say flipped, you just turn the leaf upside down right? I have 2 leafs too, but with a 4" block. Want to try that out w/ the SD bolt notch and see if it works for me. If I bag the rear with a air over leaf, would there be some confrontation with the bag and leaf (would the bags be fighting the leafs)? lol ya i felt really ****in retarded...i pulled the spring pack apart and took the two bottom leafs and put them on top where the arch was goin towards the frame and took a c clamp to compress them then put the pin back in...i cut the bumpstop brackets off and it layed on the frame then put the notch in and its really close to the notch
	[Reply w/Quote]

06-16-2007, 12:50 PM	#410
jps2345 Go Vols! Age: 24 Join Date: Feb 2004 Posts: 400 Location: Knoxville,TN User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by TrYiN2LaYaDiMe that over head console looks good except that broke door. but i guess fat phil did that huh. ROLL TIDE. Nah, thats just the light cover, didnt have it in when I snapped that pic, cause I had just gotten it all wired up and in. I still have to get the exterior temp sensor to make the display work correctly, But its all there now. It didnt follow the contours of the roof perfectly, there are 2 gaps total one at the front and one at the rear. They will disappear when I redo the headliner, Ill just mark it and make the foam a little thicker in those areas so that it will close up any gaps. I did have to cut a hole in the backer on my headliner to allow the wires to go though, I used the existing map light power for the 4 map lights in the OHC and the auto dimming mirrow and just wired up the Dome to the existing dome light. Also, had to cut off a small 2" tab that is near the front of the console. Last edited by jps2345 : 06-16-2007 at 12:52 PM.
	[Reply w/Quote]

06-17-2007, 06:58 PM	#411
needycase Registered User Join Date: Dec 2002 Posts: 279 Location: Orlando, PSL User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by chvys10 where did u get the intake from?? Got mine on Ebay. Very nice quality, fits well. 50 bucks or so.
	[Reply w/Quote]

06-17-2007, 07:39 PM	#412
2low2tow93 Registered User Age: 21 Join Date: Feb 2006 Posts: 597 Location: Knoxville,TN User is: OffLine	Re: 1st gen Blazers; post pics here heres another pic...the back looks like its a mile off the ground lol
	[Reply w/Quote]

06-19-2007, 12:21 AM	#413
h8nbmps04 dragginby Age: 31 Join Date: Apr 2004 Posts: 517 Location: south jersey User is: OffLine	Re: 1st gen Blazers; post pics here here is a couple updated pix i took yesterday.new bumper and grille.i took it for a ride dragged it a little and then.........the water punp went.everytime i decide i want to work on it something breaks Last edited by h8nbmps04 : 06-19-2007 at 12:23 AM.
	[Reply w/Quote]

06-19-2007, 01:23 AM	#414
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,860 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: 1st gen Blazers; post pics here looks good man. i like the tubs and ya the water pump aint no thang 30 bucks and u can do it in about 30 minutes. whatsize rims u running damn there is a huge differance in them. how big is ur tunnel area for ur drive shaft.
	[Reply w/Quote]

06-22-2007, 06:22 PM	#430
jps2345 Go Vols! </

06-19-2007, 02:37 PM	#415
h8nbmps04 dragginby Age: 31 Join Date: Apr 2004 Posts: 517 Location: south jersey User is: OffLine	Re: 1st gen Blazers; post pics here thanx man the wheels are a 17/18 combo.i think its the tire size that makes em look way off.im running a stock driveshaft tunnel
	[Reply w/Quote]

06-19-2007, 06:56 PM	#416
cjlgarage chics dig a phat jimmy Join Date: May 2007 Posts: 175 Location: houston User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by h8nbmps04 thanx man the wheels are a 17/18 combo.i think its the tire size that makes em look way off.im running a stock driveshaft tunnel MAN IS THAT TRUCK ON MAUTOFIED STILL
	[Reply w/Quote]

06-19-2007, 10:41 PM	#417
lohenslohe Day Dreamin Age: 27 Join Date: Dec 2005 Posts: 1,944 Location: User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by 2low2tow93 heres another pic...the back looks like its a mile off the ground lol lol, damn your tires are like balloons!! got bored as all hell today after my first final, took off the light and a/c panels to color em. Did them up in flat black for now till I can get my paycheck and hopefully spray them with some green.
	[Reply w/Quote]

06-20-2007, 04:21 AM	#418
h8nbmps04 dragginby Age: 31 Join Date: Apr 2004 Posts: 517 Location: south jersey User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by cjlgarage MAN IS THAT TRUCK ON MAUTOFIED STILL yes it is.it will more than likely never leave me...unfortunatly
	[Reply w/Quote]

06-20-2007, 04:57 AM	#419
2low2tow93 Registered User Age: 21 Join Date: Feb 2006 Posts: 597 Location: Knoxville,TN User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by lohenslohe lol, damn your tires are like balloons!! got bored as all hell today after my first final, took off the light and a/c panels to color em. Did them up in flat black for now till I can get my paycheck and hopefully spray them with some green. lol ya...they're huge...my pretty much my whole dash is gloss black and i shaved that indention on the glove box...im thinkin bout glassin my dash and doin it black but i dunna i really dont like any of the 1st gen dash's
	[Reply w/Quote]

06-20-2007, 08:02 PM	#420
TrYiN2LaYaDiMe SFBD 4 door Age: 29 Join Date: Dec 2005 Posts: 5,860 Location: Columbia, Tenakey Location: Tupelo, Ms User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by 2low2tow93 lol ya...they're huge...my pretty much my whole dash is gloss black and i shaved that indention on the glove box...im thinkin bout glassin my dash and doin it black but i dunna i really dont like any of the 1st gen dash's do a cavy dash like this guy has. i know they make a full glass one from a grand am.
	[Reply w/Quote]

06-20-2007, 08:45 PM	#421
93blazer4dr 2nd nature fabrication Join Date: Aug 2006 Posts: 1,395 Location: louisville ky User is: OffLine	Re: 1st gen Blazers; post pics here heres my new custom dash http://i91.photobucket.com/albums/k2...inblazer-1.jpg
	[Reply w/Quote]

06-20-2007, 09:12 PM	#422
streetdreams420 streetswepa Age: 29 Join Date: Jul 2003 Posts: 620 Location: milton ontario User is: OffLine	Re: 1st gen Blazers; post pics here sweet dash bro, gonna look sweet when she's finished
	[Reply w/Quote]

06-21-2007, 07:17 AM	#423
2low2tow93 Registered User Age: 21 Join Date: Feb 2006 Posts: 597 Location: Knoxville,TN User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by TrYiN2LaYaDiMe do a cavy dash like this guy has. i know they make a full glass one from a grand am. im not sure what i wanna do with it,kinda wanted to do that at first but ive seen several with a cavy dash im kinda leanin towards a sheet metal but i dunna
	[Reply w/Quote]

06-21-2007, 08:38 AM	#424
oxsign ADDICTIVE DESIRES Age: 5 Join Date: Jul 2004 Posts: 2,276 Location: Orlando User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by 93blazer4dr heres my new custom dash I like the look of that. Good job.
	[Reply w/Quote]

06-21-2007, 03:58 PM	#425
cjlgarage chics dig a phat jimmy Join Date: May 2007 Posts: 175 Location: houston User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by h8nbmps04 yes it is.it will more than likely never leave me...unfortunatly u got the tub fixed hows yhe rear set up
	[Reply w/Quote]

06-21-2007, 06:41 PM	#426
miniblazer under construction Age: 21 Join Date: Aug 2005 Posts: 1,076 Location: Fort Hood, TX User is: OffLine	Re: 1st gen Blazers; post pics here i know i aighnt got shit on a few of these but heres mine. Last edited by miniblazer : 07-02-2007 at 04:57 PM.
	[Reply w/Quote]

06-21-2007, 06:43 PM	#427
93blazer4dr 2nd nature fabrication Join Date: Aug 2006 Posts: 1,395 Location: louisville ky User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by oxsign I like the look of that. Good job. thanks and the steering wheel will be up higher and im going with a classic steering wheel to go with the dash it took alot of work to cut it down section the middel of it and weld everything back still got some more welding but for the most part its done
	[Reply w/Quote]

06-21-2007, 08:07 PM	#428
lohenslohe Day Dreamin Age: 27 Join Date: Dec 2005 Posts: 1,944 Location: User is: OffLine	Re: 1st gen Blazers; post pics here Quote: Originally Posted by miniblazer i know i aighnt got shit on a few of these but heres mine. it's a start. what you planning for it? or have already in it?
	[Reply w/Quote]

06-21-2007, 09:00 PM	#429
93blazer4dr 2nd nature fabrication Join Date: Aug 2006 Posts: 1,395 Location: louisville ky User is: OffLine	Re: 1st gen Blazers; post pics here miniblazer nice truck i love 4drs but there are getting to be way to many good luck on your truck
	[Reply w/Quote]