Post pics of ZR2 S-10 or Blazer

nyteRyda · 01-05-2009, 07:53 PM

Quote: Originally Posted by VoRtEcZr243

me and my friend's silvy (he sold it about 3 months ago):

Oh I'll get it dirty every now and then, too

A little flexin:

Stick on hood scoops

B_Rich · 01-11-2009, 11:42 PM

They came with the truck when I bought it. I think it just gives the truck a more aggressive look on the front end.

I hate them on all other cars/trucks I've seen, but I like 'em on my truck.

beedle4 · 01-11-2009, 11:48 PM

I forget was your hood bent or did it savoid damage? If so is it getting a stock replacement?

B_Rich · 01-12-2009, 07:21 PM

Quote: Originally Posted by beedle4

I forget was your hood bent or did it savoid damage? If so is it getting a stock replacement?

The hood was damaged, but I'll be getting it fixed tomorrow. It was just buckled a little bit down by the grille. The hood is part of the truck...... I just gotta have it

Zr2Sputnik360 · 01-12-2009, 07:38 PM

Quote: Originally Posted by VoRtEcZr243

The hood is part of the truck...... I just gotta have it

Deffinately

Heres my baby.

Weak flex because of the ice :P

Stuffin the 33.

Pre-lift

Do I qualify as a pic whore?

2002zr2crackaa · 01-13-2009, 08:38 PM

All in 2wd

And this is the crew...light day of muddin...

tt85_GM · 01-15-2009, 06:14 PM

2wd in the hole?

my truck would get stuck in that dirt parking lot

nice rides, Zr2Sputnik that's a sick ride.

ManiacMotorsports · 01-16-2009, 04:08 PM

My wrecked Zr2 I picked up for $300 (after he t-boned me)

***EDIT*** How do you get it to not post as thumbs?

Tim99Zr2 · 01-16-2009, 07:26 PM

copy and paste the IMG link from photobucket

TokoDragon · 01-17-2009, 04:51 AM

Quote:

s10W
nice Z Toko, I've been looking to get a roll bar with lights on it. How did you route your wires?

Thanks!
I got the roll bar for $75 at a yard sale, the guy had it in his toyota tacoma, but took it out after he rolled the truck, it only had a hole big enough for a single 12 gauge wire, I drilled that hole bigger to fit 2 10 gauge wires and ran them down the roll bar (2 down each side) and out the bottom and I drilled a hole in the truck bed for the wires to come out under the bed. Neg wire bolts to the bottom side of the roll bar pos side goes along the top of the frame through the dash to a relay and a switch.

Trucks with Roll Bars look sexy! I've gotten a lot of compliments with it.

It needs a lot of work though, SES light came on, new valance, tailgate, lots of things need to be repainted, door squeaks really really loud, strap fell off the exhast again so it rattles, and I hope the creak coming from under the truck is not the ball joints going out.

Hey ZR2Sputnik are those 33 x 10.5 tires? BDS 5'' lift? They look awesome, that's the size I wanted to go with, better mpg, better digging and ice driving.

beedle4 · 01-18-2009, 04:24 AM

[IMG]http://i705.photobucket.com/albums/ww58/beedleZr2/sweet005-1.jpg[/IMG]
[IMG]http://i705.photobucket.com/albums/ww58/beedleZr2/sweet006.jpg[/IMG]
[IMG]http://i705.photobucket.com/albums/ww58/beedleZr2/sweet007-1.jpg[/IMG]

tt85_GM · 01-18-2009, 01:41 PM

umm..wow

Zr2Sputnik360 · 01-31-2009, 09:10 PM

Quote: Originally Posted by TokoDragon

Thanks!
Hey ZR2Sputnik are those 33 x 10.5 tires? BDS 5'' lift? They look awesome, that's the size I wanted to go with, better mpg, better digging and ice driving.

Yessir, those are 33x10.5 BFGs. I just have a 2" body lift with 2" shackles and a 1.25" tbar crank. They perform great so far

Thanks for the compliments guys, I love my baby. I'll put some new pics up when I get my grille/flares/bumpers/wheels repainted. I've got some big plans

c-and-b2004 · 02-03-2009, 04:23 PM

Here is my 2000 ZR2 I put the stickers on the step tubes and the cold air intake and a billet aluminum 3rd door handle so it will not break again. I have alot of other mods I plan on doing after I get some more money. They will include 2" lift front with tubuler upper Arms and 2" shackle's rear, lund sun visor, super bull bar with fog lights, roof mount light bar with offroad lights, throttle body riser, accel ignition coil, accel plug wires, bfg mud terrain tires 31x10.50, black modular wheels 15x7 maybe with 1" backspace if the lift will allow them to not rub, and other cosmetic features.I will post more as I get things done.

beedle4 · 02-03-2009, 04:34 PM

I honestly hope your joking about 1" backspaceing? You will NOT be able to turn and it will rip your front end up!

And the 2" superlifts a waste of money. Just crank the front end 1.5" and add shackles. And maybe a body lift.

off_road_kid · 02-08-2009, 08:18 PM

Quote: Originally Posted by untouchablez

heres mine 03

^^

i love it

Tyhuck · 02-12-2009, 09:21 PM

This may be off topic, but how do you debadge the doors and tailgate without peeling the paint or leaving that black adhesive on your truck?

major376 · 02-15-2009, 01:02 AM

where'd you get the hood?

ky_crane · 02-16-2009, 08:43 AM

Quote: Originally Posted by Tyhuck

This may be off topic, but how do you debadge the doors and tailgate without peeling the paint or leaving that black adhesive on your truck?

its not to hard, so far i have taken the s10 off the tailgate and the ls badge off. take a blow dryer and heat them up real well and use an old credit card/gift card and slowly go under them and cut it away from teh body. it will take some time but dont rush it. when you have them removed use some goo gone to remove all the left over residue.

i plan next to remove chevrolet from the tailgate and s10 from the front doors

Merritt · 02-25-2009, 06:09 AM

Quote: Originally Posted by major376

where'd you get the hood?

Look in the classifieds section, there might be one in there for sale, otherwise look around for deals, or if you don't mind paying about $400 order from Summit.

rsmt blue dime · 02-25-2009, 07:53 PM

Quote: Originally Posted by Tyhuck

This may be off topic, but how do you debadge the doors and tailgate without peeling the paint or leaving that black adhesive on your truck?

i did it with a friend we used some goo gone hair dryer and fishing line

Tyhuck · 02-25-2009, 10:59 PM

Here's mine. Not much but it gets the job done. Thought Ide throw my GMC2500 some face time too.

ZR2nut · 02-27-2009, 05:37 PM

Here is my 99

Tyhuck · 02-28-2009, 05:03 PM

Quote: Originally Posted by ZR2nut

Here is my 99

What size tires are you running? Is that stock height?

Looks great

ZR2nut · 03-01-2009, 11:44 AM

Quote: Originally Posted by Tyhuck

What size tires are you running? Is that stock height?

Looks great

Those are 32" BFG MTs. I had to put a set of AALs on to cure the infamous rear end sag and I tweaked the TBs a little. I had to do some very minor trimming on the flares up front . I will be getting the lift shackles for the rear this spring, probably no more than 1.25". It still needs a little more lift in the rear. I really want to lift it big time but not with the stock IFS under it. Maybe one day a SFA swap. Thanks for the comment.

ZR2Mudslinger · 03-08-2009, 08:53 PM

there's a few more of mine.

ManiacMotorsports · 03-15-2009, 11:13 AM

Quote: Originally Posted by ZR2Mudslinger

there's a few more of mine.

Not to be a jerk or anything but you need to straighten out your brush guard its leaning way back, looks terrible...other than that nice truck!

donaldps10 · 03-30-2009, 03:29 PM

here is mine, just bought it... nothing else to do for me really, just fab up a push bar and throw my headache rack on it and i will be good to go. any one know of any cheap low prof. tool boxes i could throw in my truck?

the sunroof pops up and out as well if you want, it's pretty sweet.
any suggestions would be appreciated!
i have a budget of about $20 so they might take some time... lolol

Zr2Sputnik360 · 04-03-2009, 01:45 PM

A little update. Added a headache rack with 4 100W KCs. Now I'm at 1190W of light.

donaldps10 · 04-03-2009, 08:04 PM

nice ride man, love it!!!
you have a body life or cranked T-bars?

J Tizzle · 04-05-2009, 11:22 PM

My $700 2003 ZR2.

J Tizzle · 04-05-2009, 11:27 PM

Zr2Sputnik360 · 04-06-2009, 02:16 PM

Quote: Originally Posted by donaldps10

nice ride man, love it!!!
you have a body life or cranked T-bars?

Thanks man! I have a 2" body lift, 1.25" tbar crank, and 1.5" shackles. I can fit 33x10.5s without trimming and no rubbing even when flexed.

donaldps10 · 04-06-2009, 11:29 PM

wow, thats sweet!
your truck is pretty much what my old truck wanted to be... lol

97 PROCHARGED LS6 · 04-09-2009, 12:13 PM

My Winter Truck 2001 Zr2 Blazer

Shorty Lickens · 04-24-2009, 05:58 PM

First off, Hello!

2nd: I am jealous of untouchablez.

3rd: Here it is - http://i658.photobucket.com/albums/u...evy/S-10_4.jpg

Nothing special, but it makes me happy.

ZR2Mudslinger · 05-01-2009, 12:40 AM

Quote: Originally Posted by ManiacMotorsports

Not to be a jerk or anything but you need to straighten out your brush guard its leaning way back, looks terrible...other than that nice truck!

i have hit 2 deer and a pedestrian with that brush guard, first deer was at 47 mph, 2nd deer was at 35 mph, and the pedestrian was at maybe 3 mph?? A woman walked out infront of me in a parking lot and i didnt see her, she told everyone it was her fault because she saw me but kept walking, i didnt do it intentionally and i felt terrible for it the whole day.

i have tried straightening it out but the mounts are bent where it attaches underneath the grille. i am going to loosen all the bolts and tie it off to a tree or pole and back it up until it pulls back down. Other than that my Z has changed since those pics, i got new rims that make my tires stick out more, Crager Soft 8's 15 x 8 with 4.5" of backspacing.

ZR2Mudslinger · 05-01-2009, 12:47 AM

whoops double post

blacknreds10 · 05-12-2009, 06:06 PM

heres mine 1 inch body lift 2 inch suspension 2 inch shackles 33x10.5bfg all terrains check out my cardomain-http://www.cardomain.com/id/RMLs01zr2

haro2289 · 05-13-2009, 05:54 PM

Don't think I've ever posted pics of my blaZeR2 up on here. so here they are..and a couple with the ol' truck in it....

Day I brought it home after goin' through a few local trails.

Crawling around the garage woops lol

As it sits now

Sorry no action shots, but it gets wheeled pretty good. Last pics are just when I finished waxing it and cleaning up for the first time in months. (narrow dirt/mud roads suck on paint)

donaldps10 · 05-19-2009, 11:06 AM

nice, how did you do black out the rims? rattle can or something else????

looks sweet!!!

wanna trade??? lol

(here is my Z)

haro2289 · 05-20-2009, 08:43 PM

I used the black metallic wheel paint you can buy in a rattle can. I used it on my last s10 my jetta and on this and so far, for rattle can, I think it turned out really well. I don't like the availabilty of wheel choices with the backspacing on these. So, I painted the wheels on this and my last dime.

donaldps10 · 05-20-2009, 10:23 PM

Quote: Originally Posted by haro2289

I used the black metallic wheel paint you can buy in a rattle can. I used it on my last s10 my jetta and on this and so far, for rattle can, I think it turned out really well. I don't like the availabilty of wheel choices with the backspacing on these. So, I painted the wheels on this and my last dime.

it's flipping sweet... makes me wanna get some PA3's and do the same...

Firefighter181 · 05-27-2009, 06:43 PM

Here is mine, will be moving to 32 11.50 x 15 tires and adding a 2" body lift later in the summer.

http://www.villagephotos.com/utils/i...6\DSC_0541.JPG

**sorry, the pic is pretty pretty big so I added it as a link**

Tyhuck · 05-31-2009, 06:27 PM

Finally got my Bumpers finished and mounted. Camper shell at the body shop now. Should be ready next week. Will post pics later.

PS. I am running out of room for attached pics. How do you post them up as larger images.

donaldps10 · 06-01-2009, 04:54 AM

get a photobucket account and just copy the [IMG]blablablablabaablskdbaksfak[IMG] and it will post... like this:

UPDATE, got some new tires... 32x10.5 BFG M/T and cranked the t-bars, i need a lift... lol

iceemudd · 06-03-2009, 12:47 PM

I recently bought mine, can't wait to fix it up. It may need a tranny and definitely needs some body work. The previous owner was pretty rough on it so I had to rescue it. Missed my old zr2.

Tyhuck · 06-03-2009, 05:31 PM

I like that stripe. Any idea where to get a couple?

donaldps10 · 06-03-2009, 06:39 PM

devries signs... he is real big on zr2usa.com

here is a recent link to some of his zr2 stuff
http://www.zr2usa.com/mboard/index.p...pic=37092&st=0

not sure if he still sells the KO stripes but he might.
email him
devriessigns@gmail.com

Tyhuck · 06-05-2009, 09:51 PM

Everyone else gets to update the progress on their impressive rigs. So am I, even though Its not as impressive as some build-ups.

Got my camper shell back from the paint shop. Not a bad investment for a total of $400, purchase and paint. My poor old 2500 feels so neglected.

http://i683.photobucket.com/albums/v...g?t=1244252848

http://i683.photobucket.com/albums/v...g?t=1244252886

I added the bumpers, front and rear.

http://i683.photobucket.com/albums/v...g?t=1244252688

http://i683.photobucket.com/albums/v...g?t=1244252721

I also added ZR2 decals and color matched tail light guards.

http://i683.photobucket.com/albums/v...g?t=1244252433

Next, I will work on offroad lighting and a cargo rack on the camper.

01-05-2009, 07:53 PM	#51
nyteRyda Registered User Age: 26 Join Date: Apr 2008 Posts: 691 Location: Kingston Pa User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by VoRtEcZr243 me and my friend's silvy (he sold it about 3 months ago): Oh I'll get it dirty every now and then, too A little flexin: Stick on hood scoops
	[Reply w/Quote]

01-11-2009, 11:42 PM	#52
B_Rich Zr2USA = B_Rich Age: 21 Join Date: Mar 2007 Posts: 2,072 Location: Iowa User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer They came with the truck when I bought it. I think it just gives the truck a more aggressive look on the front end. I hate them on all other cars/trucks I've seen, but I like 'em on my truck.
	[Reply w/Quote]

01-11-2009, 11:48 PM	#53
beedle4 Registered User Age: 22 Join Date: May 2007 Posts: 1,268 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer I forget was your hood bent or did it savoid damage? If so is it getting a stock replacement?
	[Reply w/Quote]

01-12-2009, 07:21 PM	#54
B_Rich Zr2USA = B_Rich Age: 21 Join Date: Mar 2007 Posts: 2,072 Location: Iowa User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by beedle4 I forget was your hood bent or did it savoid damage? If so is it getting a stock replacement? The hood was damaged, but I'll be getting it fixed tomorrow. It was just buckled a little bit down by the grille. The hood is part of the truck...... I just gotta have it
	[Reply w/Quote]

01-12-2009, 07:38 PM	#55
Zr2Sputnik360 Never Enough Light Age: 19 Join Date: Aug 2008 Posts: 91 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by VoRtEcZr243 The hood is part of the truck...... I just gotta have it Deffinately Heres my baby. Weak flex because of the ice :P Stuffin the 33. Pre-lift Do I qualify as a pic whore?
	[Reply w/Quote]

01-13-2009, 08:38 PM	#56
2002zr2crackaa Registered User Join Date: May 2008 Posts: 120 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer All in 2wd And this is the crew...light day of muddin...
	[Reply w/Quote]

01-15-2009, 06:14 PM	#57
tt85_GM I AM CANADIAN Age: 24 Join Date: Feb 2006 Posts: 5,383 Location: Ont. Canada User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer 2wd in the hole? my truck would get stuck in that dirt parking lot nice rides, Zr2Sputnik that's a sick ride. Last edited by tt85_GM : 01-15-2009 at 06:16 PM.
	[Reply w/Quote]

01-16-2009, 04:08 PM	#58
ManiacMotorsports Fabrication Madman Age: 23 Join Date: Oct 2008 Posts: 69 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer My wrecked Zr2 I picked up for $300 (after he t-boned me) *EDIT* How do you get it to not post as thumbs? Last edited by ManiacMotorsports : 03-10-2009 at 03:53 PM.
	[Reply w/Quote]

01-16-2009, 07:26 PM	#59
Tim99Zr2 Fvck New Jersey Age: 21 Join Date: Mar 2007 Posts: 7,952 Location: Reynoldsville, PA User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer copy and paste the IMG link from photobucket
	[Reply w/Quote]

01-17-2009, 04:51 AM	#60
TokoDragon ZR2 mini-truckin' Age: 21 Join Date: Feb 2006 Posts: 1,120 Location: Idaho User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: s10W nice Z Toko, I've been looking to get a roll bar with lights on it. How did you route your wires? Thanks! I got the roll bar for $75 at a yard sale, the guy had it in his toyota tacoma, but took it out after he rolled the truck, it only had a hole big enough for a single 12 gauge wire, I drilled that hole bigger to fit 2 10 gauge wires and ran them down the roll bar (2 down each side) and out the bottom and I drilled a hole in the truck bed for the wires to come out under the bed. Neg wire bolts to the bottom side of the roll bar pos side goes along the top of the frame through the dash to a relay and a switch. Trucks with Roll Bars look sexy! I've gotten a lot of compliments with it. It needs a lot of work though, SES light came on, new valance, tailgate, lots of things need to be repainted, door squeaks really really loud, strap fell off the exhast again so it rattles, and I hope the creak coming from under the truck is not the ball joints going out. Hey ZR2Sputnik are those 33 x 10.5 tires? BDS 5'' lift? They look awesome, that's the size I wanted to go with, better mpg, better digging and ice driving. Last edited by TokoDragon : 01-17-2009 at 04:57 AM.
	[Reply w/Quote]

01-18-2009, 04:24 AM	#61
beedle4 Registered User Age: 22 Join Date: May 2007 Posts: 1,268 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer [IMG]http://i705.photobucket.com/albums/ww58/beedleZr2/sweet005-1.jpg[/IMG] [IMG]http://i705.photobucket.com/albums/ww58/beedleZr2/sweet006.jpg[/IMG] [IMG]http://i705.photobucket.com/albums/ww58/beedleZr2/sweet007-1.jpg[/IMG] Last edited by beedle4 : 01-18-2009 at 04:31 AM.
	[Reply w/Quote]

01-18-2009, 01:41 PM	#62
tt85_GM I AM CANADIAN Age: 24 Join Date: Feb 2006 Posts: 5,383 Location: Ont. Canada User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer umm..wow
	[Reply w/Quote]

01-31-2009, 09:10 PM	#63
Zr2Sputnik360 Never Enough Light Age: 19 Join Date: Aug 2008 Posts: 91 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by TokoDragon Thanks! Hey ZR2Sputnik are those 33 x 10.5 tires? BDS 5'' lift? They look awesome, that's the size I wanted to go with, better mpg, better digging and ice driving. Yessir, those are 33x10.5 BFGs. I just have a 2" body lift with 2" shackles and a 1.25" tbar crank. They perform great so far Thanks for the compliments guys, I love my baby. I'll put some new pics up when I get my grille/flares/bumpers/wheels repainted. I've got some big plans
	[Reply w/Quote]

02-03-2009, 04:34 PM	#65
beedle4 Registered User Age: 22 Join Date: May 2007 Posts: 1,268 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer I honestly hope your joking about 1" backspaceing? You will NOT be able to turn and it will rip your front end up! And the 2" superlifts a waste of money. Just crank the front end 1.5" and add shackles. And maybe a body lift.
	[Reply w/Quote]

02-08-2009, 08:18 PM	#66
off_road_kid Registered User Join Date: Jan 2009 Posts: 34 Location: cassopolis User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by untouchablez heres mine 03 ^^i love it
	[Reply w/Quote]

02-12-2009, 09:21 PM	#67
Tyhuck Game Pop. Control Agent Age: 25 Join Date: Feb 2009 Posts: 597 Location: East, TX User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer This may be off topic, but how do you debadge the doors and tailgate without peeling the paint or leaving that black adhesive on your truck?
	[Reply w/Quote]

02-15-2009, 01:02 AM	#68
major376 Registered User Join Date: Feb 2009 Posts: 180 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer where'd you get the hood?
	[Reply w/Quote]

02-16-2009, 08:43 AM	#69
ky_crane Registered User Age: 22 Join Date: Nov 2008 Posts: 8 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by Tyhuck This may be off topic, but how do you debadge the doors and tailgate without peeling the paint or leaving that black adhesive on your truck? its not to hard, so far i have taken the s10 off the tailgate and the ls badge off. take a blow dryer and heat them up real well and use an old credit card/gift card and slowly go under them and cut it away from teh body. it will take some time but dont rush it. when you have them removed use some goo gone to remove all the left over residue. i plan next to remove chevrolet from the tailgate and s10 from the front doors
	[Reply w/Quote]

02-25-2009, 06:09 AM	#70
Merritt Registered Abuser Age: 24 Join Date: Dec 2007 Posts: 8,811 Location: King, NC User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by major376 where'd you get the hood? Look in the classifieds section, there might be one in there for sale, otherwise look around for deals, or if you don't mind paying about $400 order from Summit.
	[Reply w/Quote]

02-25-2009, 07:53 PM	#71
rsmt blue dime Registered User Age: 19 Join Date: Jan 2009 Posts: 24 Location: Rosemount, MN User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by Tyhuck This may be off topic, but how do you debadge the doors and tailgate without peeling the paint or leaving that black adhesive on your truck? i did it with a friend we used some goo gone hair dryer and fishing line
	[Reply w/Quote]

02-28-2009, 05:03 PM	#74
Tyhuck Game Pop. Control Agent Age: 25 Join Date: Feb 2009 Posts: 597 Location: East, TX User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by ZR2nut Here is my 99 What size tires are you running? Is that stock height? Looks great
	[Reply w/Quote]

03-01-2009, 11:44 AM	#75
ZR2nut Registered User Age: 43 Join Date: Jul 2008 Posts: 44 Location: Miamisburg,Ohio User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by Tyhuck What size tires are you running? Is that stock height? Looks great Those are 32" BFG MTs. I had to put a set of AALs on to cure the infamous rear end sag and I tweaked the TBs a little. I had to do some very minor trimming on the flares up front . I will be getting the lift shackles for the rear this spring, probably no more than 1.25". It still needs a little more lift in the rear. I really want to lift it big time but not with the stock IFS under it. Maybe one day a SFA swap. Thanks for the comment.
	[Reply w/Quote]

03-08-2009, 08:53 PM	#76
ZR2Mudslinger Registered User Age: 21 Join Date: Dec 2008 Posts: 25 Location: Marietta, Ohio User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer there's a few more of mine.
	[Reply w/Quote]

03-15-2009, 11:13 AM	#77
ManiacMotorsports Fabrication Madman Age: 23 Join Date: Oct 2008 Posts: 69 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by ZR2Mudslinger there's a few more of mine. Not to be a jerk or anything but you need to straighten out your brush guard its leaning way back, looks terrible...other than that nice truck!
	[Reply w/Quote]

03-30-2009, 03:29 PM	#78
donaldps10 bags=fags Age: 23 Join Date: Mar 2009 Posts: 406 Location: Dallas, TX User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer here is mine, just bought it... nothing else to do for me really, just fab up a push bar and throw my headache rack on it and i will be good to go. any one know of any cheap low prof. tool boxes i could throw in my truck? the sunroof pops up and out as well if you want, it's pretty sweet. any suggestions would be appreciated! i have a budget of about $20 so they might take some time... lolol
	[Reply w/Quote]

04-03-2009, 01:45 PM	#79
Zr2Sputnik360 Never Enough Light Age: 19 Join Date: Aug 2008 Posts: 91 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer A little update. Added a headache rack with 4 100W KCs. Now I'm at 1190W of light.
	[Reply w/Quote]

04-03-2009, 08:04 PM	#80
donaldps10 bags=fags Age: 23 Join Date: Mar 2009 Posts: 406 Location: Dallas, TX User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer nice ride man, love it!!! you have a body life or cranked T-bars?
	[Reply w/Quote]

04-05-2009, 11:22 PM	#81
J Tizzle Chop Shop Customs Age: 29 Join Date: Mar 2009 Posts: 269 Location: Racine,Wi User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer My $700 2003 ZR2.
	[Reply w/Quote]

04-06-2009, 02:16 PM	#83
Zr2Sputnik360 Never Enough Light Age: 19 Join Date: Aug 2008 Posts: 91 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by donaldps10 nice ride man, love it!!! you have a body life or cranked T-bars? Thanks man! I have a 2" body lift, 1.25" tbar crank, and 1.5" shackles. I can fit 33x10.5s without trimming and no rubbing even when flexed.
	[Reply w/Quote]

04-06-2009, 11:29 PM	#84
donaldps10 bags=fags Age: 23 Join Date: Mar 2009 Posts: 406 Location: Dallas, TX User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer wow, thats sweet! your truck is pretty much what my old truck wanted to be... lol
	[Reply w/Quote]

04-24-2009, 05:58 PM	#86
Shorty Lickens Registered User Join Date: Apr 2009 Posts: 1 Location: Manassas Virginia User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer First off, Hello! 2nd: I am jealous of untouchablez. 3rd: Here it is - http://i658.photobucket.com/albums/u...evy/S-10_4.jpg Nothing special, but it makes me happy.
	[Reply w/Quote]

05-01-2009, 12:40 AM	#87
ZR2Mudslinger Registered User Age: 21 Join Date: Dec 2008 Posts: 25 Location: Marietta, Ohio User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Quote: Originally Posted by ManiacMotorsports Not to be a jerk or anything but you need to straighten out your brush guard its leaning way back, looks terrible...other than that nice truck! i have hit 2 deer and a pedestrian with that brush guard, first deer was at 47 mph, 2nd deer was at 35 mph, and the pedestrian was at maybe 3 mph?? A woman walked out infront of me in a parking lot and i didnt see her, she told everyone it was her fault because she saw me but kept walking, i didnt do it intentionally and i felt terrible for it the whole day. i have tried straightening it out but the mounts are bent where it attaches underneath the grille. i am going to loosen all the bolts and tie it off to a tree or pole and back it up until it pulls back down. Other than that my Z has changed since those pics, i got new rims that make my tires stick out more, Crager Soft 8's 15 x 8 with 4.5" of backspacing.
	[Reply w/Quote]

05-01-2009, 12:47 AM	#88
ZR2Mudslinger Registered User Age: 21 Join Date: Dec 2008 Posts: 25 Location: Marietta, Ohio User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer whoops double post Last edited by ZR2Mudslinger : 05-01-2009 at 12:50 AM. Reason: double post
	[Reply w/Quote]

05-12-2009, 06:06 PM	#89
blacknreds10 Registered User Age: 22 Join Date: May 2009 Posts: 16 Location: beaverton, oregon User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer heres mine 1 inch body lift 2 inch suspension 2 inch shackles 33x10.5bfg all terrains check out my cardomain-http://www.cardomain.com/id/RMLs01zr2
	[Reply w/Quote]

05-13-2009, 05:54 PM	#90
haro2289 Sittin' Low....For Now Age: 20 Join Date: Jun 2007 Posts: 485 Location: User is: OffLine	Re: Post pics of ZR2 S-10 or Blazer Don't think I've ever posted pics of my blaZeR2 up on here. so here they are..and a couple with the ol' truck in it.... Day I brought it home after goin' through a few local trails. Crawling around the garage woops lol As it sits now Sorry no action shots, but it gets wheeled pretty good. Last pics are just when I finished waxing it and cleaning up for the first time in months. (narrow dirt/mud roads suck on paint)
	[Reply w/Quote]