Dallas Hot Rod Parts Byc... New Upper Arms

dragthepaint · 08-27-2008, 02:16 AM

Ok guys I know the story with BYC and Mike. I too waited waited and waited for parts, luckily I actually got my parts before things got out of hand and he closed BYC.

If you dont know the story .USE THE SEARCH MENU.

NEW INFORMATION:
So I have a set of BYC Upper and Lowers from way back when, In June hell maybe even May, I seen an updated post/rant session about some BYC products. Mike said he was replacing defective parts and such. Upon further inspection of my upper arms that were on my truck I seen they were bending and would eventually/more than likely fail. So I emailed him and we agreed he would replace the defective Uppers. I was put on a list of people waiting for parts and when he got them ready he would notify me..

So he has now emailed me and said my replacements Are Ready and gonna be shipped out ASAP.

He will be sending me:
2 New Upper Arms Powder Coated Low Gloss Black
2 New Crosshafts and Hardware
4 New Polly Bushings.

Once I recieve them I will post up some pics and my first impression opinion of them.

dragthepaint · 09-05-2008, 02:17 PM

Well I got my Replacement Parts Yesterday......

Cross-shafts are a prototype he sent them for fitting and testing.

Everything Looks good so far they seem to be made a hell of alot better than the other set I first got from him back in the BYC days. The welds are cleaner the Ball joint plate provides more bracing. Powder coat came out nice. Cross-shafts im still on the fence about, but they were free for testing purposes so what the hell Y not, I still have my stock cross-shafts for road use once the truck leaves the shop.

Here are some pics of the The New Uppers

Hopefully I will get a chance to bolt em up soon to check the fitting

russell · 09-05-2008, 02:23 PM

good luck

slonlow2000 · 09-05-2008, 02:26 PM

So are they sellin these again under the new name of the thread?

dragthepaint · 09-05-2008, 03:02 PM

As far as i know right now he is just filling old orders and replacing bad parts from BYC.....I imagine once he gets caught up he will sell them again.

Redd · 09-27-2008, 03:05 PM

must be nice... did you pay?

He was going to make me new uppers at no cost, now get to pay damn near what suicide doors sells em for..

08-27-2008, 02:16 AM	#1
dragthepaint Multiple Dime Owner Age: 28 Join Date: Mar 2003 Posts: 198 Location: Elyria User is: OffLine	Dallas Hot Rod Parts Byc... New Upper Arms Ok guys I know the story with BYC and Mike. I too waited waited and waited for parts, luckily I actually got my parts before things got out of hand and he closed BYC. If you dont know the story .USE THE SEARCH MENU. NEW INFORMATION: So I have a set of BYC Upper and Lowers from way back when, In June hell maybe even May, I seen an updated post/rant session about some BYC products. Mike said he was replacing defective parts and such. Upon further inspection of my upper arms that were on my truck I seen they were bending and would eventually/more than likely fail. So I emailed him and we agreed he would replace the defective Uppers. I was put on a list of people waiting for parts and when he got them ready he would notify me.. So he has now emailed me and said my replacements Are Ready and gonna be shipped out ASAP. He will be sending me: 2 New Upper Arms Powder Coated Low Gloss Black 2 New Crosshafts and Hardware 4 New Polly Bushings. Once I recieve them I will post up some pics and my first impression opinion of them.
	[Reply w/Quote]

09-05-2008, 02:17 PM	#2
dragthepaint Multiple Dime Owner Age: 28 Join Date: Mar 2003 Posts: 198 Location: Elyria User is: OffLine	Re: Dallas Hot Rod Parts Byc... New Upper Arms Well I got my Replacement Parts Yesterday...... Cross-shafts are a prototype he sent them for fitting and testing. Everything Looks good so far they seem to be made a hell of alot better than the other set I first got from him back in the BYC days. The welds are cleaner the Ball joint plate provides more bracing. Powder coat came out nice. Cross-shafts im still on the fence about, but they were free for testing purposes so what the hell Y not, I still have my stock cross-shafts for road use once the truck leaves the shop. Here are some pics of the The New Uppers Hopefully I will get a chance to bolt em up soon to check the fitting
	[Reply w/Quote]

09-05-2008, 02:23 PM	#3
russell Whood'a Thought Age: 21 Join Date: Apr 2007 Posts: 4,637 Location: Durant,OK User is: OffLine	Re: Dallas Hot Rod Parts Byc... New Upper Arms good luck
	[Reply w/Quote]

09-05-2008, 02:26 PM	#4
slonlow2000 Bought Not Built Age: 20 Join Date: Jan 2007 Posts: 1,126 Location: Rolla, Mo User is: OffLine	Re: Dallas Hot Rod Parts Byc... New Upper Arms So are they sellin these again under the new name of the thread?
	[Reply w/Quote]

09-05-2008, 03:02 PM	#5
dragthepaint Multiple Dime Owner Age: 28 Join Date: Mar 2003 Posts: 198 Location: Elyria User is: OffLine	Re: Dallas Hot Rod Parts Byc... New Upper Arms As far as i know right now he is just filling old orders and replacing bad parts from BYC.....I imagine once he gets caught up he will sell them again. Last edited by dragthepaint : 09-05-2008 at 03:03 PM. Reason: mispelled word
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

09-27-2008, 03:05 PM	#6
Redd Registered User Age: 25 Join Date: Aug 2007 Posts: 611 Location: Arlington, Tx/at the Nfamus shop User is: OffLine	Re: Dallas Hot Rod Parts Byc... New Upper Arms must be nice... did you pay? He was going to make me new uppers at no cost, now get to pay damn near what suicide doors sells em for..
	[Reply w/Quote]

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)