back half and Juice install

kandel123 · 03-01-2008, 09:49 PM

Ok we started out with a wrecked 97 S10 Ex cab. 2.2 5 speed. The front and rear were totaled out so i bought it for 200 bucks and here it is! We began stripping the truck to see what the damage to the frame was and concluded that a back half and juice install was needed to get this thing rolling again. along with the frame all the front end parts had to be changed out for parts we had laying around after my last sonoma burnt to the ground. Well start off with pics of the damage and work into pics of the new frame rails. we are using 1/4 inch side wall steel(oh so beefy). Well be doing a 3 pump pro hopper setup and our goal is to be able to three wheel and hop the rear. Our ultimate goal is todo a standing three wheel so to achieve this were going todo a tank behind the axle along with all the batteries and pumps. We need peoples input for the voltage and brand batteries to run along with how many. Let us know what you think of the prgress so far much more to come.

SAFTEY FIRST!!

kandel123 · 03-01-2008, 09:51 PM

kandel123 · 03-01-2008, 10:04 PM

We changed the front end last week and made the jig for the frame rails. so today we started with already made frame rails and started stripping the rear. We stripped the whole rear and welded in the frame rails all today. ENJOY

AND THIS IS WHAT THE TRUCK LOOKED LIKE TWO YEARS AGO!!!!

THEN WRECKED FIVE TIMES PLEASE DONT DRINK AND DRIVE. I didnt do all the wreckes

Chappy316 · 03-01-2008, 10:22 PM

youd better make this one a lil nicer then that C10 you were rolling...

and ill have pics of the 18s as soon as i get them on... hopefully the little truck...

and youd better keep this updated too, honkey!

kandel123 · 03-01-2008, 10:23 PM

im not posting anymore pics untill i get to see my wheels on your truck lol just kidding

pumpkinss_dime · 03-01-2008, 10:26 PM

lookin good man

Lee337 · 03-01-2008, 10:30 PM

looks good so far. I like the "notchless" back halfs.

Clean and simple.

kandel123 · 03-01-2008, 11:09 PM

Quote: Originally Posted by Lee337

looks good so far. I like the "notchless" back halfs.

Clean and simple.

thanks man! I appreciate it.

drps10 · 03-02-2008, 01:20 AM

Looking good mark!

i'll be by to check this out (hopefully completed) when I get home

dropndestroy92 · 03-02-2008, 10:32 AM

kinda pissed that i missed this yesterday came out nice

Chappy316 · 03-02-2008, 03:53 PM

i meant to ask, is that your old front end?

and them 18s woulda looked sweet on here i bet...

wanna buy em back???? lol

kandel123 · 03-02-2008, 09:02 PM

Quote: Originally Posted by drps10

Looking good mark!

i'll be by to check this out (hopefully completed) when I get home

when you coming back?

Quote: Originally Posted by dropndestroy92

kinda pissed that i missed this yesterday came out nice

thanks man you didnt miss much just a lot of bitching and bretting entertaining bill and me working. lol

Quote: Originally Posted by Chappy316

i meant to ask, is that your old front end?

and them 18s woulda looked sweet on here i bet...

wanna buy em back???? lol

yeah thats my old front end! Naw im putting 100 spoke daytons on this bitch hahaha not sure yet

purevil115 · 03-02-2008, 09:17 PM

yeah man we have some fun times working on this shit. Atleast I can weld now hahaha

dropndestroy92 · 03-03-2008, 07:50 PM

thanks man you didnt miss much just a lot of bitching and bretting entertaining bill and me working. lol

so kinda the norm except i missed the new frame build

kandel123 · 03-03-2008, 08:51 PM

Quote: Originally Posted by dropndestroy92

thanks man you didnt miss much just a lot of bitching and bretting entertaining bill and me working. lol

so kinda the norm except i missed the new frame build

yeah so basically they had there fun and i worked. Dont get me wrong they helped where they could but its kinda hard for them to help right now when there is only one welder!

I got some work done today, I stayed after school and sandblasted the suicide doors differential three link bracket because it was in the garage that burned down. So i mounted that to the axle and mounted the Gmc wheels up front. i have a lot of measuring and figuring to get the axle set up plus i am waiting for four link bungs. Ill keep you posted

purevil115 · 03-03-2008, 09:53 PM

I guess I could have started to relocte under the hood but it was more fun jacking around. Plus we got the biggest update of them all I can finally weld!!! its a huge breakthrough.

kandel123 · 03-04-2008, 07:58 PM

Today I mounted and balanced some 195/60/15 tires on those GMC wheels. When i bought the truck it came with those black mustang Wheels and a 5/6 drop kit so I got all that crap loaded in my truck and i am taking it back to the kid tomorrow. Also I called ProHopper today and ill get the hydros thurs and my 4-Link bungs will be here friday. I have all day Sat off so you should see some progress Sat night. Other than that not much progress today!

pumpkinss_dime · 03-05-2008, 12:51 PM

sweet man i might have to come by or something sometime soon maybe even help out a lil

abracadabra · 03-06-2008, 11:04 AM

looking really good man. *subscribes*

Independent · 03-06-2008, 07:44 PM

Looks good. Will you be reinforcing the entire frame to withstand the 3 wheeling and hopping?

kandel123 · 03-06-2008, 08:37 PM

Quote: Originally Posted by abracadabra

looking really good man. *subscribes*

thanks man!

Quote: Originally Posted by Independent

Looks good. Will you be reinforcing the entire frame to withstand the 3 wheeling and hopping?

no because the frame is all boxed in to the front. I will not be hoppin a lot and i plan on selling when im done!( It will be fine!)

got all my stuff in today

Chappy316 · 03-06-2008, 09:20 PM

did that box of Camels come with the hydro stuff?

b-min94 · 03-06-2008, 09:35 PM

so atleast when someone ask "does that thing have dros" You can say yes with a big

!!! Looking good man.

kandel123 · 03-06-2008, 10:46 PM

Quote: Originally Posted by Chappy316

did that box of Camels come with the hydro stuff?

Yes acctually they did. Buy one set of hydros get a pack of camel lights free. its a new promo!

Quote: Originally Posted by b-min94

so atleast when someone ask "does that thing have dros" You can say yes with a big !!! Looking good man.

people are pretty smart around here no one asks me if i have dros. They are down with the bags thing. But yes if they do ask i can say yeah dooood!

***98layinframe*** · 03-06-2008, 11:09 PM

can i ask ya approx what that setup run ya price wise? I was looking for some cylinders and power ball prices..

kandel123 · 03-06-2008, 11:16 PM

three pumps sixteen inch cylinders in the rear with reverse cups powerballs and eights up front with solenoids and all the valves ran me about 1400 shipped

purevil115 · 03-07-2008, 04:55 PM

looks good man, glad you got it figured out, I see you just went and got 3 more fittings to make it work.

Chappy316 · 03-07-2008, 08:02 PM

Quote: Originally Posted by kandel123

Yes acctually they did. Buy one set of hydros get a pack of camel lights free. its a new promo!

snaps niggy!

too bad i dont smoke...

kandel123 · 03-08-2008, 10:16 PM

Only update is that we got 16 inches of snow! and i got the axle tubs cleaned up and drilled out the four link tabs out to 5/8 for my heim joints.

drps10 · 03-09-2008, 01:41 AM

16'' thats sweet!!!!!!! i' be out in the 4wheeler or something.. probably plowing all the driveways tho

but it makes money

teamwebestrokin · 03-09-2008, 11:19 AM

what 4 link are you going with, I'm seriously considering losing the drop leafs four a 3/4 link, money is tight though

kandel123 · 03-09-2008, 07:08 PM

Quote: Originally Posted by drps10

16'' thats sweet!!!!!!! i' be out in the 4wheeler or something.. probably plowing all the driveways tho but it makes money

yes we rode fourwheelers all day today. They called off work(thank god) but i didnt get anything done today.

Quote: Originally Posted by teamwebestrokin

what 4 link are you going with, I'm seriously considering losing the drop leafs four a 3/4 link, money is tight though

how are you going to do a three link with a static drop. Coils overs?

03-01-2008, 09:49 PM	#1
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	back half and Juice install Ok we started out with a wrecked 97 S10 Ex cab. 2.2 5 speed. The front and rear were totaled out so i bought it for 200 bucks and here it is! We began stripping the truck to see what the damage to the frame was and concluded that a back half and juice install was needed to get this thing rolling again. along with the frame all the front end parts had to be changed out for parts we had laying around after my last sonoma burnt to the ground. Well start off with pics of the damage and work into pics of the new frame rails. we are using 1/4 inch side wall steel(oh so beefy). Well be doing a 3 pump pro hopper setup and our goal is to be able to three wheel and hop the rear. Our ultimate goal is todo a standing three wheel so to achieve this were going todo a tank behind the axle along with all the batteries and pumps. We need peoples input for the voltage and brand batteries to run along with how many. Let us know what you think of the prgress so far much more to come. SAFTEY FIRST!! Last edited by kandel123 : 03-01-2008 at 09:58 PM.
	[Reply w/Quote]

03-01-2008, 09:51 PM	#2
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install
	[Reply w/Quote]

03-01-2008, 10:04 PM	#3
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install We changed the front end last week and made the jig for the frame rails. so today we started with already made frame rails and started stripping the rear. We stripped the whole rear and welded in the frame rails all today. ENJOY AND THIS IS WHAT THE TRUCK LOOKED LIKE TWO YEARS AGO!!!! THEN WRECKED FIVE TIMES PLEASE DONT DRINK AND DRIVE. I didnt do all the wreckes Last edited by kandel123 : 03-01-2008 at 10:06 PM.
	[Reply w/Quote]

03-01-2008, 10:22 PM	#4
Chappy316 SOLD! Age: 23 Join Date: Mar 2005 Posts: 3,892 Location: Cedar Point Ohio User is: OffLine	Re: back half and Juice install youd better make this one a lil nicer then that C10 you were rolling... and ill have pics of the 18s as soon as i get them on... hopefully the little truck... and youd better keep this updated too, honkey!
	[Reply w/Quote]

03-01-2008, 10:23 PM	#5
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install im not posting anymore pics untill i get to see my wheels on your truck lol just kidding
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

03-01-2008, 10:26 PM	#6
pumpkinss_dime yo Age: 21 Join Date: Nov 2005 Posts: 1,229 Location: carrollton, Ohio User is: OffLine	Re: back half and Juice install lookin good man
	[Reply w/Quote]

03-01-2008, 10:30 PM	#7
Lee337 Cheez-It eater Age: 25 Join Date: Dec 2004 Posts: 85 Location: Mid-Michigan User is: OffLine	Re: back half and Juice install looks good so far. I like the "notchless" back halfs. Clean and simple.
	[Reply w/Quote]

03-01-2008, 11:09 PM	#8
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install Quote: Originally Posted by Lee337 looks good so far. I like the "notchless" back halfs. Clean and simple. thanks man! I appreciate it.
	[Reply w/Quote]

03-02-2008, 01:20 AM	#9
drps10 !! TALK NOW !! Age: 23 Join Date: Oct 2002 Posts: 4,703 Location: Northern Ohio User is: OffLine	Re: back half and Juice install Looking good mark! i'll be by to check this out (hopefully completed) when I get home
	[Reply w/Quote]

03-02-2008, 10:32 AM	#10
dropndestroy92 E=mc vagina Age: 19 Join Date: Jul 2007 Posts: 73 Location: louisville ohio User is: OffLine	Re: back half and Juice install kinda pissed that i missed this yesterday came out nice
	[Reply w/Quote]

03-02-2008, 03:53 PM	#11
Chappy316 SOLD! Age: 23 Join Date: Mar 2005 Posts: 3,892 Location: Cedar Point Ohio User is: OffLine	Re: back half and Juice install i meant to ask, is that your old front end? and them 18s woulda looked sweet on here i bet... wanna buy em back???? lol
	[Reply w/Quote]

03-02-2008, 09:02 PM	#12
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install Quote: Originally Posted by drps10 Looking good mark! i'll be by to check this out (hopefully completed) when I get home when you coming back? Quote: Originally Posted by dropndestroy92 kinda pissed that i missed this yesterday came out nice thanks man you didnt miss much just a lot of bitching and bretting entertaining bill and me working. lol Quote: Originally Posted by Chappy316 i meant to ask, is that your old front end? and them 18s woulda looked sweet on here i bet... wanna buy em back???? lol yeah thats my old front end! Naw im putting 100 spoke daytons on this bitch hahaha not sure yet
	[Reply w/Quote]

03-02-2008, 09:17 PM	#13
purevil115 Registered User Age: 21 Join Date: Feb 2006 Posts: 1,800 Location: lousiville, Ohio User is: OffLine	Re: back half and Juice install yeah man we have some fun times working on this shit. Atleast I can weld now hahaha
	[Reply w/Quote]

03-03-2008, 07:50 PM	#14
dropndestroy92 E=mc vagina Age: 19 Join Date: Jul 2007 Posts: 73 Location: louisville ohio User is: OffLine	Re: back half and Juice install thanks man you didnt miss much just a lot of bitching and bretting entertaining bill and me working. lol so kinda the norm except i missed the new frame build
	[Reply w/Quote]

03-03-2008, 08:51 PM	#15
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install Quote: Originally Posted by dropndestroy92 thanks man you didnt miss much just a lot of bitching and bretting entertaining bill and me working. lol so kinda the norm except i missed the new frame build yeah so basically they had there fun and i worked. Dont get me wrong they helped where they could but its kinda hard for them to help right now when there is only one welder! I got some work done today, I stayed after school and sandblasted the suicide doors differential three link bracket because it was in the garage that burned down. So i mounted that to the axle and mounted the Gmc wheels up front. i have a lot of measuring and figuring to get the axle set up plus i am waiting for four link bungs. Ill keep you posted Last edited by kandel123 : 03-03-2008 at 08:52 PM.
	[Reply w/Quote]

03-03-2008, 09:53 PM	#16
purevil115 Registered User Age: 21 Join Date: Feb 2006 Posts: 1,800 Location: lousiville, Ohio User is: OffLine	Re: back half and Juice install I guess I could have started to relocte under the hood but it was more fun jacking around. Plus we got the biggest update of them all I can finally weld!!! its a huge breakthrough.
	[Reply w/Quote]

03-04-2008, 07:58 PM	#17
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install Today I mounted and balanced some 195/60/15 tires on those GMC wheels. When i bought the truck it came with those black mustang Wheels and a 5/6 drop kit so I got all that crap loaded in my truck and i am taking it back to the kid tomorrow. Also I called ProHopper today and ill get the hydros thurs and my 4-Link bungs will be here friday. I have all day Sat off so you should see some progress Sat night. Other than that not much progress today! Last edited by kandel123 : 03-04-2008 at 08:00 PM.
	[Reply w/Quote]

03-05-2008, 12:51 PM	#18
pumpkinss_dime yo Age: 21 Join Date: Nov 2005 Posts: 1,229 Location: carrollton, Ohio User is: OffLine	Re: back half and Juice install sweet man i might have to come by or something sometime soon maybe even help out a lil
	[Reply w/Quote]

03-06-2008, 11:04 AM	#19
abracadabra Registered User Join Date: Aug 2006 Posts: 113 Location: User is: OffLine	Re: back half and Juice install looking really good man. subscribes
	[Reply w/Quote]

03-06-2008, 07:44 PM	#20
Independent Hydraulic Pimp Age: 31 Join Date: Nov 2003 Posts: 117 Location: Rochester NY User is: OffLine	Re: back half and Juice install Looks good. Will you be reinforcing the entire frame to withstand the 3 wheeling and hopping?
	[Reply w/Quote]

03-06-2008, 08:37 PM	#21
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install Quote: Originally Posted by abracadabra looking really good man. subscribes thanks man! Quote: Originally Posted by Independent Looks good. Will you be reinforcing the entire frame to withstand the 3 wheeling and hopping? no because the frame is all boxed in to the front. I will not be hoppin a lot and i plan on selling when im done!( It will be fine!) got all my stuff in today Last edited by kandel123 : 03-06-2008 at 08:40 PM.
	[Reply w/Quote]

03-06-2008, 09:20 PM	#22
Chappy316 SOLD! Age: 23 Join Date: Mar 2005 Posts: 3,892 Location: Cedar Point Ohio User is: OffLine	Re: back half and Juice install did that box of Camels come with the hydro stuff?
	[Reply w/Quote]

03-06-2008, 09:35 PM	#23
b-min94 Ford+Mazda=betathan a s10 Age: 23 Join Date: Mar 2004 Posts: 226 Location: Derry, PA User is: OffLine	Re: back half and Juice install so atleast when someone ask "does that thing have dros" You can say yes with a big !!! Looking good man.
	[Reply w/Quote]

03-06-2008, 10:46 PM	#24
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install Quote: Originally Posted by Chappy316 did that box of Camels come with the hydro stuff? Yes acctually they did. Buy one set of hydros get a pack of camel lights free. its a new promo! Quote: Originally Posted by b-min94 so atleast when someone ask "does that thing have dros" You can say yes with a big !!! Looking good man. people are pretty smart around here no one asks me if i have dros. They are down with the bags thing. But yes if they do ask i can say yeah dooood!
	[Reply w/Quote]

03-06-2008, 11:16 PM	#26
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install three pumps sixteen inch cylinders in the rear with reverse cups powerballs and eights up front with solenoids and all the valves ran me about 1400 shipped
	[Reply w/Quote]

03-07-2008, 04:55 PM	#27
purevil115 Registered User Age: 21 Join Date: Feb 2006 Posts: 1,800 Location: lousiville, Ohio User is: OffLine	Re: back half and Juice install looks good man, glad you got it figured out, I see you just went and got 3 more fittings to make it work.
	[Reply w/Quote]

03-07-2008, 08:02 PM	#28
Chappy316 SOLD! Age: 23 Join Date: Mar 2005 Posts: 3,892 Location: Cedar Point Ohio User is: OffLine	Re: back half and Juice install Quote: Originally Posted by kandel123 Yes acctually they did. Buy one set of hydros get a pack of camel lights free. its a new promo! snaps niggy! too bad i dont smoke...
	[Reply w/Quote]

03-08-2008, 10:16 PM	#29
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install Only update is that we got 16 inches of snow! and i got the axle tubs cleaned up and drilled out the four link tabs out to 5/8 for my heim joints.
	[Reply w/Quote]

03-09-2008, 01:41 AM	#30
drps10 !! TALK NOW !! Age: 23 Join Date: Oct 2002 Posts: 4,703 Location: Northern Ohio User is: OffLine	Re: back half and Juice install 16'' thats sweet!!!!!!! i' be out in the 4wheeler or something.. probably plowing all the driveways tho but it makes money
	[Reply w/Quote]

03-09-2008, 11:19 AM	#31
teamwebestrokin Registered User Join Date: May 2007 Posts: 37 Location: User is: OffLine	Re: back half and Juice install what 4 link are you going with, I'm seriously considering losing the drop leafs four a 3/4 link, money is tight though
	[Reply w/Quote]

03-09-2008, 07:08 PM	#32
kandel123 Mark Age: 21 Join Date: Sep 2005 Posts: 564 Location: Northeastern Ohio User is: OffLine	Re: back half and Juice install Quote: Originally Posted by drps10 16'' thats sweet!!!!!!! i' be out in the 4wheeler or something.. probably plowing all the driveways tho but it makes money yes we rode fourwheelers all day today. They called off work(thank god) but i didnt get anything done today. Quote: Originally Posted by teamwebestrokin what 4 link are you going with, I'm seriously considering losing the drop leafs four a 3/4 link, money is tight though how are you going to do a three link with a static drop. Coils overs?
	[Reply w/Quote]