Project ~ stock floored on 22s

s10on22s · 06-07-2007, 01:08 AM

what kind of shocks you running in the front??? i have 22s on my s10 with nissan d21 shocks and they max out before my wheels are outta the fenders..

lowdime96 · 06-07-2007, 11:55 AM

i'm running monroe sensa trac shocks made for a nissan 94 hardbody. I untuck tire about an 1" but the busings on the shocks pancake to nothing when i fully lift the truck, i end up loosing about 1/4" of lift. In total i get about 10" of lift and the truck lays flat skid plate in the front.

s1043 · 06-07-2007, 10:03 PM

Quote: Originally Posted by lowdime96

i'm running monroe sensa trac shocks made for a nissan 94 hardbody. I untuck tire about an 1" but the busings on the shocks pancake to nothing when i fully lift the truck, i end up loosing about 1/4" of lift. In total i get about 10" of lift and the truck lays flat skid plate in the front.

why dont u get shocks that extend more and play around with ur mount to get it so that when ur bag is fully maxed out at max lift ur shock is maxed to.. cause i know u would like that 1/4 of more lift...

lowdime96 · 06-07-2007, 11:48 PM

it puts less stress on my upper balljoints. after i get the truck alligned the wheels will be toed in a little at full lift too.

Muff · 06-08-2007, 11:47 AM

Pat hurry up and finish this you gotta have it done for the chevy show in ri.

s1043 · 06-08-2007, 03:44 PM

Quote: Originally Posted by lowdime96

it puts less stress on my upper balljoints. after i get the truck alligned the wheels will be toed in a little at full lift too.

u mean if the shock still has some travel left its less stress?

fiveinchbodydrop · 06-08-2007, 04:27 PM

i think what he's sayin is if he lets the arm go the rest of the way the balljoint will be maxed out and binding... so if he limits it just before that point he'll have no worries on the joint....

if im wrong, i apologize

lowdime96 · 06-09-2007, 12:53 AM

youre right on the money there chris!

heres my update....

I finished my front suspension. I need to repace the tie rod ends but i will get it it later down the road. everything else is ready to rock and roll. color matched spray paint FTW.

My nice completely undersized brake rotors! haha

The money shots! yep shes dirty too.

Now the cab is off and i'm going to under coat the bottom and finish up the firewall and then the truck will be ready to put back together!

BTW: if you guys have the new domination video i'm in the magentic minis section draggin ass for about 1 second! woot

bnkrpt311 · 06-09-2007, 01:36 AM

i <3 your truck lots and lots!

DrptS10 · 06-09-2007, 01:36 AM

damn looks sweet makes me wanna work on mine now little to late tho

2 LayLo · 06-09-2007, 04:08 AM

sweet about the domination vid...im in the slammin and jammin footage a complete look at my truck and also at havoc a clip of it there.

dawgnutz · 06-09-2007, 06:00 AM

Werd man! Those Coys look so sic!

Shit Didn't you hear man!?!...........................Tiny Rotors are all the rage these days! LOL !

fiveinchbodydrop · 06-09-2007, 11:47 AM

nice man! 22's are really growing on me

DannyBaggs · 06-09-2007, 03:23 PM

nice dood...whats up with the drivers side frame horn up front? looks bent

lowdime96 · 06-09-2007, 06:16 PM

Quote: Originally Posted by DannyBaggs

nice dood...whats up with the drivers side frame horn up front? looks bent

my truck was into an accident about 1 and 1/2 years. i think it bent from that. i welded a bar acrossed so that the horns won't move from eachother because i knew the bumper already sat level the way it was. Hows your truck coming man?

RacerXS10 · 06-09-2007, 06:27 PM

I have those rotors, get some Hawk pads and some braided stainless lines. That'll help your braking. I have that set up on my truck and romp on it daily and stops way better then stock did. So that could help slow those 22's down.
Lookin good though man.

lowdime96 · 06-09-2007, 07:24 PM

thanks jeff already got the stainless lines

Mr Blue · 06-09-2007, 07:53 PM

Diggin the lip on those 22's! Whats it measure?

HofinaterSS · 06-09-2007, 08:15 PM

Quote: Originally Posted by RacerXS10

I have those rotors, get some Hawk pads and some braided stainless lines. That'll help your braking. I have that set up on my truck and romp on it daily and stops way better then stock did. So that could help slow those 22's down.
Lookin good though man.

what rotors and which hawk pads do you have?

Oh, and truck looks insane!!

RacerXS10 · 06-09-2007, 09:00 PM

Quote: Originally Posted by HofinaterSS

what rotors and which hawk pads do you have?

I have the powerslot- slotted and dimpled rotors. As for the hawk pads, I think they are the carbon ones. Its been a few years since I bought them. I also have the russel lines. I think I've had this set up for over 2 years. I'll be replacing them soon, as there is about nothing left to them

lowdime96 · 06-09-2007, 09:06 PM

Quote: Originally Posted by Mr Blue

Diggin the lip on those 22's! Whats it measure?

5-6" i think.

s1043 · 06-10-2007, 03:36 PM

god damn dude that looks sick

layinbody31 · 06-10-2007, 04:15 PM

nice sway bar

s1043 · 06-10-2007, 07:21 PM

post up some pics of ur shock mounts up front.. thanks

s10sixteynine · 06-10-2007, 08:34 PM

i know they are 22s but jesus they look massive ...

waiting for more

laydoutjimmy · 06-10-2007, 10:13 PM

holy small rotors on that one pic everything else is looking awesome bro keep it up

DannyBaggs · 06-10-2007, 10:52 PM

Quote: Originally Posted by lowdime96

my truck was into an accident about 1 and 1/2 years. i think it bent from that. i welded a bar acrossed so that the horns won't move from eachother because i knew the bumper already sat level the way it was. Hows your truck coming man?

i haven't touched it about a week.....and im still waiting for my control arms which should have been here weeks ago....i got the lowers last week and the uppers are ALLEGEDLY on the way....but they should have been here fri. according to SD and they are not yet here. When i called they would just give me the run around....at powder coaters.....then on the shelf waiting for Ball Joints....and last week they were back at the powder coaters lol

lowdime96 · 06-10-2007, 11:47 PM

Quote: Originally Posted by s1043

post up some pics of ur shock mounts up front.. thanks

they should be on this thread.. check back a few pages.

otheriwise you can check out this link for my gallery.
http://northeastsyndicate.com/index....nails&album=10

Quote: Originally Posted by DannyBaggs

i haven't touched it about a week.....and im still waiting for my control arms which should have been here weeks ago....i got the lowers last week and the uppers are ALLEGEDLY on the way....but they should have been here fri. according to SD and they are not yet here. When i called they would just give me the run around....at powder coaters.....then on the shelf waiting for Ball Joints....and last week they were back at the powder coaters lol

yeah thats why i ordered my arms raw.... that and becasue i was planning on a sway bar from the get-go.

DannyBaggs · 06-11-2007, 08:22 AM

Quote: Originally Posted by lowdime96

yeah thats why i ordered my arms raw.... that and becasue i was planning on a sway bar from the get-go.

yea....oh and do you still have those lights? i got a grill shell finally so ill take them if you got em

BIGGERISBETTER · 06-11-2007, 08:37 AM

looks fukkin nutty man.. Awesome job.

lade-lo · 06-11-2007, 02:12 PM

through them fenders on there for a looksie

06-07-2007, 01:08 AM	#401
s10on22s mine drags on the ground Join Date: Jul 2006 Posts: 19 Location: ma User is: OffLine	Re: Project ~ stock floored on 22s what kind of shocks you running in the front??? i have 22s on my s10 with nissan d21 shocks and they max out before my wheels are outta the fenders..
	[Reply w/Quote]

06-07-2007, 11:55 AM	#402
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s i'm running monroe sensa trac shocks made for a nissan 94 hardbody. I untuck tire about an 1" but the busings on the shocks pancake to nothing when i fully lift the truck, i end up loosing about 1/4" of lift. In total i get about 10" of lift and the truck lays flat skid plate in the front.
	[Reply w/Quote]

06-07-2007, 10:03 PM	#403
s1043 layin body! Age: 23 Join Date: Feb 2006 Posts: 363 Location: Pittsburgh Pa User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by lowdime96 i'm running monroe sensa trac shocks made for a nissan 94 hardbody. I untuck tire about an 1" but the busings on the shocks pancake to nothing when i fully lift the truck, i end up loosing about 1/4" of lift. In total i get about 10" of lift and the truck lays flat skid plate in the front. why dont u get shocks that extend more and play around with ur mount to get it so that when ur bag is fully maxed out at max lift ur shock is maxed to.. cause i know u would like that 1/4 of more lift...
	[Reply w/Quote]

06-07-2007, 11:48 PM	#404
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s it puts less stress on my upper balljoints. after i get the truck alligned the wheels will be toed in a little at full lift too.
	[Reply w/Quote]

06-08-2007, 11:47 AM	#405
Muff Registered User Join Date: Jun 2006 Posts: 2,117 Location: New Haven, CT User is: OffLine	Re: Project ~ stock floored on 22s Pat hurry up and finish this you gotta have it done for the chevy show in ri.
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

06-08-2007, 03:44 PM	#406
s1043 layin body! Age: 23 Join Date: Feb 2006 Posts: 363 Location: Pittsburgh Pa User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by lowdime96 it puts less stress on my upper balljoints. after i get the truck alligned the wheels will be toed in a little at full lift too. u mean if the shock still has some travel left its less stress?
	[Reply w/Quote]

06-08-2007, 04:27 PM	#407
fiveinchbodydrop Registered User Age: 28 Join Date: Jan 2005 Posts: 4,850 Location: mt.juliet, tn User is: OffLine	Re: Project ~ stock floored on 22s i think what he's sayin is if he lets the arm go the rest of the way the balljoint will be maxed out and binding... so if he limits it just before that point he'll have no worries on the joint.... if im wrong, i apologize
	[Reply w/Quote]

06-09-2007, 12:53 AM	#408
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s youre right on the money there chris! heres my update.... I finished my front suspension. I need to repace the tie rod ends but i will get it it later down the road. everything else is ready to rock and roll. color matched spray paint FTW. My nice completely undersized brake rotors! haha The money shots! yep shes dirty too. Now the cab is off and i'm going to under coat the bottom and finish up the firewall and then the truck will be ready to put back together! BTW: if you guys have the new domination video i'm in the magentic minis section draggin ass for about 1 second! woot Last edited by lowdime96 : 06-09-2007 at 12:57 AM.
	[Reply w/Quote]

06-09-2007, 01:36 AM	#409
bnkrpt311 Registered User Age: 23 Join Date: Nov 2004 Posts: 2,474 Location: Waukesha, WI via MPLS, MN User is: OffLine	Re: Project ~ stock floored on 22s i <3 your truck lots and lots!
	[Reply w/Quote]

06-09-2007, 01:36 AM	#410
DrptS10 Daily Driven Join Date: Jan 2007 Posts: 952 Location: User is: OffLine	Re: Project ~ stock floored on 22s damn looks sweet makes me wanna work on mine now little to late tho
	[Reply w/Quote]

06-09-2007, 04:08 AM	#411
2 LayLo Severed TIES pledge Age: 20 Join Date: Feb 2007 Posts: 565 Location: User is: OffLine	Re: Project ~ stock floored on 22s sweet about the domination vid...im in the slammin and jammin footage a complete look at my truck and also at havoc a clip of it there.
	[Reply w/Quote]

06-09-2007, 06:00 AM	#412
dawgnutz The Werk Truck Age: 28 Join Date: Feb 2002 Posts: 2,846 Location: Huntington Beach, Ca. User is: OffLine	Re: Project ~ stock floored on 22s Werd man! Those Coys look so sic! Shit Didn't you hear man!?!...........................Tiny Rotors are all the rage these days! LOL !
	[Reply w/Quote]

06-09-2007, 11:47 AM	#413
fiveinchbodydrop Registered User Age: 28 Join Date: Jan 2005 Posts: 4,850 Location: mt.juliet, tn User is: OffLine	Re: Project ~ stock floored on 22s nice man! 22's are really growing on me
	[Reply w/Quote]

06-09-2007, 03:23 PM	#414
DannyBaggs DoorDragger Age: 22 Join Date: Dec 2003 Posts: 960 Location: North Haven, CT User is: OffLine	Re: Project ~ stock floored on 22s nice dood...whats up with the drivers side frame horn up front? looks bent
	[Reply w/Quote]

06-09-2007, 06:16 PM	#415
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by DannyBaggs nice dood...whats up with the drivers side frame horn up front? looks bent my truck was into an accident about 1 and 1/2 years. i think it bent from that. i welded a bar acrossed so that the horns won't move from eachother because i knew the bumper already sat level the way it was. Hows your truck coming man?
	[Reply w/Quote]

06-09-2007, 06:27 PM	#416
RacerXS10 Wears Black Shirts Age: 26 Join Date: Aug 2001 Posts: 2,265 Location: CT User is: OffLine	Re: Project ~ stock floored on 22s I have those rotors, get some Hawk pads and some braided stainless lines. That'll help your braking. I have that set up on my truck and romp on it daily and stops way better then stock did. So that could help slow those 22's down. Lookin good though man.
	[Reply w/Quote]

06-09-2007, 07:24 PM	#417
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s thanks jeff already got the stainless lines
	[Reply w/Quote]

06-09-2007, 07:53 PM	#418
Mr Blue Its a Blue thing. Age: 23 Join Date: May 2003 Posts: 8,397 Location: ♦♠♣So★Cal♣♠♦ User is: OffLine	Re: Project ~ stock floored on 22s Diggin the lip on those 22's! Whats it measure?
	[Reply w/Quote]

06-09-2007, 08:15 PM	#419
HofinaterSS rusty bumper member Age: 22 Join Date: Jul 2003 Posts: 3,826 Location: north jersey User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by RacerXS10 I have those rotors, get some Hawk pads and some braided stainless lines. That'll help your braking. I have that set up on my truck and romp on it daily and stops way better then stock did. So that could help slow those 22's down. Lookin good though man. what rotors and which hawk pads do you have? Oh, and truck looks insane!!
	[Reply w/Quote]

06-09-2007, 09:00 PM	#420
RacerXS10 Wears Black Shirts Age: 26 Join Date: Aug 2001 Posts: 2,265 Location: CT User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by HofinaterSS what rotors and which hawk pads do you have? I have the powerslot- slotted and dimpled rotors. As for the hawk pads, I think they are the carbon ones. Its been a few years since I bought them. I also have the russel lines. I think I've had this set up for over 2 years. I'll be replacing them soon, as there is about nothing left to them
	[Reply w/Quote]

06-09-2007, 09:06 PM	#421
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by Mr Blue Diggin the lip on those 22's! Whats it measure? 5-6" i think.
	[Reply w/Quote]

06-10-2007, 03:36 PM	#422
s1043 layin body! Age: 23 Join Date: Feb 2006 Posts: 363 Location: Pittsburgh Pa User is: OffLine	Re: Project ~ stock floored on 22s god damn dude that looks sick
	[Reply w/Quote]

06-10-2007, 04:15 PM	#423
layinbody31 Center your wheels! Age: 22 Join Date: Jul 2004 Posts: 9,180 Location: Griffith, IN User is: OffLine	Re: Project ~ stock floored on 22s nice sway bar
	[Reply w/Quote]

06-10-2007, 07:21 PM	#424
s1043 layin body! Age: 23 Join Date: Feb 2006 Posts: 363 Location: Pittsburgh Pa User is: OffLine	Re: Project ~ stock floored on 22s post up some pics of ur shock mounts up front.. thanks
	[Reply w/Quote]

06-10-2007, 08:34 PM	#425
s10sixteynine lets get hammered Join Date: Mar 2007 Posts: 2,067 Location: anniston, al User is: OffLine	Re: Project ~ stock floored on 22s i know they are 22s but jesus they look massive ... waiting for more
	[Reply w/Quote]

06-10-2007, 10:13 PM	#426
laydoutjimmy Layd the **** out Age: 21 Join Date: Jul 2006 Posts: 754 Location: Baltimore MD User is: OffLine	Re: Project ~ stock floored on 22s holy small rotors on that one pic everything else is looking awesome bro keep it up
	[Reply w/Quote]

06-10-2007, 10:52 PM	#427
DannyBaggs DoorDragger Age: 22 Join Date: Dec 2003 Posts: 960 Location: North Haven, CT User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by lowdime96 my truck was into an accident about 1 and 1/2 years. i think it bent from that. i welded a bar acrossed so that the horns won't move from eachother because i knew the bumper already sat level the way it was. Hows your truck coming man? i haven't touched it about a week.....and im still waiting for my control arms which should have been here weeks ago....i got the lowers last week and the uppers are ALLEGEDLY on the way....but they should have been here fri. according to SD and they are not yet here. When i called they would just give me the run around....at powder coaters.....then on the shelf waiting for Ball Joints....and last week they were back at the powder coaters lol
	[Reply w/Quote]

06-10-2007, 11:47 PM	#428
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by s1043 post up some pics of ur shock mounts up front.. thanks they should be on this thread.. check back a few pages. otheriwise you can check out this link for my gallery. http://northeastsyndicate.com/index....nails&album=10 Quote: Originally Posted by DannyBaggs i haven't touched it about a week.....and im still waiting for my control arms which should have been here weeks ago....i got the lowers last week and the uppers are ALLEGEDLY on the way....but they should have been here fri. according to SD and they are not yet here. When i called they would just give me the run around....at powder coaters.....then on the shelf waiting for Ball Joints....and last week they were back at the powder coaters lol yeah thats why i ordered my arms raw.... that and becasue i was planning on a sway bar from the get-go. Last edited by lowdime96 : 06-10-2007 at 11:49 PM.
	[Reply w/Quote]

06-11-2007, 08:22 AM	#429
DannyBaggs DoorDragger Age: 22 Join Date: Dec 2003 Posts: 960 Location: North Haven, CT User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by lowdime96 yeah thats why i ordered my arms raw.... that and becasue i was planning on a sway bar from the get-go. yea....oh and do you still have those lights? i got a grill shell finally so ill take them if you got em
	[Reply w/Quote]

06-11-2007, 08:37 AM	#430
BIGGERISBETTER flat blue and layin frame Age: 24 Join Date: Aug 2004 Posts: 5,884 Location: Bolivar, Ohio User is: OffLine	Re: Project ~ stock floored on 22s looks fukkin nutty man.. Awesome job.
	[Reply w/Quote]

06-11-2007, 02:12 PM	#431
lade-lo TUCKIN Age: 23 Join Date: Oct 2003 Posts: 861 Location: TX User is: OffLine	Re: Project ~ stock floored on 22s through them fenders on there for a looksie
	[Reply w/Quote]

06-11-2007, 02:54 PM	#432
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock fl