Project ~ stock floored on 22s

lowdime96 · 12-28-2007, 12:07 AM

thanks ladies.... just got done welding up that side of the bed, got the bed unbolted, and ripped out the air management.

Milky4204 · 12-29-2007, 05:54 PM

bed looks good man. the suicide door hinges look beefy as hell.

miniblazinbmx · 01-04-2008, 03:03 AM

Awesome!

s10sixteynine · 01-19-2008, 02:23 AM

bump lol where did u get your booster ? did it clear good? what is the stoping power like? thanks in advance

lowdime96 · 01-20-2008, 10:41 PM

its a 7" dual off ebay. i had to move it over an inch to clear the 22's. that was a bitch.

s10sixteynine · 01-20-2008, 10:46 PM

did it stop good it looks extra small

miniblazinbmx · 01-21-2008, 01:53 AM

I use my stock Jm5. 9" diameter, clears 20's witha 5" SFBD

lowdime96 · 01-21-2008, 07:20 PM

A 7" dual diaphram booster has close to the power of a 12" single diaphram. Its actually a little better than my stock one was but nothing crazy. Do note that a lot of the aftermarket master cylinders that come with those boosters suck and will really hurt your braking. This is why I made my stock one work. I don't like how ugly the stock ones are but It is worth it to keep. If i did it again id run a hydro boost because those are sick. I did one on my buddys truck and the brakes are crazy nice.

s10sixteynine · 01-21-2008, 08:26 PM

well hopefully i ordered the right one blazerida88 got one that looks like yours and his bolted to the firewall and factory master with no mods, i couldnt find one that had the bolt pattern on the ad, and i only got the booster not the combo

and i know im botherin u with the questions but u did get the 5 1/2 backspacing im just checking cause im about ready to order my wheels, what other wheels did u look at im haveing trouble finding wheels in a 22 that are right for the truck, i wanted the kmc nova but they dont have the right offset

lowdime96 · 01-22-2008, 12:56 PM

i had 9" wide wheels with a 5.5" offset. If you get 9.5" wheels you might need a 6" offset because my wheels didn't come into the fenders quite as far as i wanted them too.

lowdime96 · 01-23-2008, 07:16 PM

Just letting everyone know that I took my truck out of the shop I was renting and drove it home. Its sitting until spring and hopefully by then I should have built up enough interest and money to get into it again. I used to get a lot more work done at home so hopefully I will get the truck done faster.

layinbody31 · 01-23-2008, 07:28 PM

what all do you have left to do??

lowdime96 · 01-23-2008, 07:44 PM

well i don't really have anything left to do, the body drop is completely done. right now i'm sheet metaling the bed, doing body work, and interior work. I left all this stuff for last because i didn't want to ruin any of it during the body drop.

s10sixteynine · 01-24-2008, 10:38 AM

thanks for the info man im goin wheel shopping today

layinbody31 · 01-24-2008, 09:52 PM

gotcha. Must be nice to have a driveable bodydropped truck lol

miniblazinbmx · 01-31-2008, 09:18 PM

enough chit chat. Where are the goodie pics?

lowdime96 · 02-01-2008, 12:02 AM

here is a pic from when it looked cool.

Mr Blue · 02-01-2008, 12:15 AM

Priceless...

blackLS1 · 02-01-2008, 01:06 AM

sweet

mayhem247 · 02-01-2008, 01:11 AM

rad.........

layinbody31 · 02-01-2008, 01:21 AM

I got those kinda pics too haha

snakenet · 02-01-2008, 02:24 AM

that pic was my background for dayyys! i love it!

2ToneS10 · 02-02-2008, 12:38 AM

damn i remember that day haha

miniblazinbmx · 02-03-2008, 01:58 AM

badass

downtoearth · 02-13-2008, 08:44 PM

Lowdime!!! I finally got my f ucking coys and through all that trouble they sent me the wrong backspacing. They sent me 5" I dont think it will lay out without having crazy negative camber...I figured youd be the guy to ask, so let me know. Thanks

lowdime96 · 02-16-2008, 10:31 AM

damn... i had problems with my 5.5" offset wheels. i don't think those are going to work without a ton of shims man. what size are they? also are you body dropped?

downtoearth · 02-16-2008, 06:50 PM

Quote: Originally Posted by lowdime96

damn... i had problems with my 5.5" offset wheels. i don't think those are going to work without a ton of shims man. what size are they? also are you body dropped?

22's Yeah I'm body dropped with a Northstar and it is 100% not gonna work tires are gonna be close enough to cam covers 5.5 let alone 5. I'm sending back monday, they are paying for shipping both ways.

s10sixteynine · 02-16-2008, 07:34 PM

Quote: Originally Posted by downtoearth

22's Yeah I'm body dropped with a Northstar and it is 100% not gonna work tires are gonna be close enough to cam covers 5.5 let alone 5. I'm sending back monday, they are paying for shipping both ways.

i just did some test fitting and the 5s will work on the back, pushed em out right to the bed side lip, i dont think im gonna have to trim it any but i might just in case

SLAMnoma95 · 02-25-2008, 05:48 AM

5" wide whitewalls im pretty sure are rated for like 50mph...

my buddy steve (Trucks_69) has a skinny white wall in the front of his truck and i swear it looks like a wagon going downhill too fast over 55mph.

lowdime96 · 02-25-2008, 03:23 PM

yeah if i get the white walls chances are i am going to have to get radial not biased. for now i might get just some port-o-walls off ebay for $40 and put those over my stock tires.

lowdime96 · 03-19-2008, 01:20 AM

well i'm working on this bitch again. i want to get it ready for warm weather!

Here is my list
• I scored a 98+ rear bumper i'm going to put on her.
• finishing the bed
• new front bumper
• fix my frame horns
• new fenders
• new noma hood
• get the interior lookin nice nice
• repaint the truck stock color
• 20's down the road.

Set up shop back at my house:

She looks sad but sexy

also, one of my friends is begging me to sell it for $4500 as is. still not sure if i want to let it go to start a new project. i will know for sure by the end of the week.

snakenet · 03-19-2008, 02:02 AM

<quote>
also, one of my friends is begging me to sell it for $4500 as is. still not sure if i want to let it go to start a new project. i will know for sure by the end of the week.[/quote]

DONT SELL IT! NO NO NO. this is one of my favorite trucks on the whole forum, and for all the work youv done to make this truck lay on gigantic wheels with a bd, i would have to forum slap you for selling it!

antibling97 · 03-19-2008, 12:04 PM

nice jeep. dont sell it you'll regret it.

12-28-2007, 12:07 AM	#801
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s thanks ladies.... just got done welding up that side of the bed, got the bed unbolted, and ripped out the air management.
	[Reply w/Quote]

12-29-2007, 05:54 PM	#802
Milky4204 body droppin' Age: 23 Join Date: Jan 2004 Posts: 1,353 Location: kc User is: OffLine	Re: Project ~ stock floored on 22s bed looks good man. the suicide door hinges look beefy as hell.
	[Reply w/Quote]

01-04-2008, 03:03 AM	#803
miniblazinbmx Air ride equipped Age: 24 Join Date: Dec 2005 Posts: 448 Location: Dallas/Ft. Worth, TX User is: OffLine	Re: Project ~ stock floored on 22s Awesome!
	[Reply w/Quote]

01-19-2008, 02:23 AM	#804
s10sixteynine lets get hammered Join Date: Mar 2007 Posts: 2,067 Location: anniston, al User is: OffLine	Re: Project ~ stock floored on 22s bump lol where did u get your booster ? did it clear good? what is the stoping power like? thanks in advance
	[Reply w/Quote]

01-20-2008, 10:41 PM	#805
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s its a 7" dual off ebay. i had to move it over an inch to clear the 22's. that was a bitch.
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

01-20-2008, 10:46 PM	#806
s10sixteynine lets get hammered Join Date: Mar 2007 Posts: 2,067 Location: anniston, al User is: OffLine	Re: Project ~ stock floored on 22s did it stop good it looks extra small
	[Reply w/Quote]

01-21-2008, 01:53 AM	#807
miniblazinbmx Air ride equipped Age: 24 Join Date: Dec 2005 Posts: 448 Location: Dallas/Ft. Worth, TX User is: OffLine	Re: Project ~ stock floored on 22s I use my stock Jm5. 9" diameter, clears 20's witha 5" SFBD
	[Reply w/Quote]

01-21-2008, 07:20 PM	#808
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s A 7" dual diaphram booster has close to the power of a 12" single diaphram. Its actually a little better than my stock one was but nothing crazy. Do note that a lot of the aftermarket master cylinders that come with those boosters suck and will really hurt your braking. This is why I made my stock one work. I don't like how ugly the stock ones are but It is worth it to keep. If i did it again id run a hydro boost because those are sick. I did one on my buddys truck and the brakes are crazy nice.
	[Reply w/Quote]

01-21-2008, 08:26 PM	#809
s10sixteynine lets get hammered Join Date: Mar 2007 Posts: 2,067 Location: anniston, al User is: OffLine	Re: Project ~ stock floored on 22s well hopefully i ordered the right one blazerida88 got one that looks like yours and his bolted to the firewall and factory master with no mods, i couldnt find one that had the bolt pattern on the ad, and i only got the booster not the combo and i know im botherin u with the questions but u did get the 5 1/2 backspacing im just checking cause im about ready to order my wheels, what other wheels did u look at im haveing trouble finding wheels in a 22 that are right for the truck, i wanted the kmc nova but they dont have the right offset Last edited by s10sixteynine : 01-21-2008 at 08:33 PM.
	[Reply w/Quote]

01-22-2008, 12:56 PM	#810
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s i had 9" wide wheels with a 5.5" offset. If you get 9.5" wheels you might need a 6" offset because my wheels didn't come into the fenders quite as far as i wanted them too.
	[Reply w/Quote]

01-23-2008, 07:16 PM	#811
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s Just letting everyone know that I took my truck out of the shop I was renting and drove it home. Its sitting until spring and hopefully by then I should have built up enough interest and money to get into it again. I used to get a lot more work done at home so hopefully I will get the truck done faster.
	[Reply w/Quote]

01-23-2008, 07:28 PM	#812
layinbody31 Center your wheels! Age: 22 Join Date: Jul 2004 Posts: 9,180 Location: Griffith, IN User is: OffLine	Re: Project ~ stock floored on 22s what all do you have left to do??
	[Reply w/Quote]

01-23-2008, 07:44 PM	#813
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s well i don't really have anything left to do, the body drop is completely done. right now i'm sheet metaling the bed, doing body work, and interior work. I left all this stuff for last because i didn't want to ruin any of it during the body drop.
	[Reply w/Quote]

01-24-2008, 10:38 AM	#814
s10sixteynine lets get hammered Join Date: Mar 2007 Posts: 2,067 Location: anniston, al User is: OffLine	Re: Project ~ stock floored on 22s thanks for the info man im goin wheel shopping today
	[Reply w/Quote]

01-24-2008, 09:52 PM	#815
layinbody31 Center your wheels! Age: 22 Join Date: Jul 2004 Posts: 9,180 Location: Griffith, IN User is: OffLine	Re: Project ~ stock floored on 22s gotcha. Must be nice to have a driveable bodydropped truck lol
	[Reply w/Quote]

01-31-2008, 09:18 PM	#816
miniblazinbmx Air ride equipped Age: 24 Join Date: Dec 2005 Posts: 448 Location: Dallas/Ft. Worth, TX User is: OffLine	Re: Project ~ stock floored on 22s enough chit chat. Where are the goodie pics?
	[Reply w/Quote]

02-01-2008, 12:02 AM	#817
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s here is a pic from when it looked cool.
	[Reply w/Quote]

02-01-2008, 12:15 AM	#818
Mr Blue Its a Blue thing. Age: 23 Join Date: May 2003 Posts: 8,398 Location: ♦♠♣So★Cal♣♠♦ User is: OffLine	Re: Project ~ stock floored on 22s Priceless...
	[Reply w/Quote]

02-01-2008, 01:06 AM	#819
blackLS1 Registered User Age: 31 Join Date: Oct 2002 Posts: 4,329 Location: Smithfield NC User is: OffLine	Re: Project ~ stock floored on 22s sweet
	[Reply w/Quote]

02-01-2008, 01:11 AM	#820
mayhem247 "BUILT-NOT-BOUGHT" Age: 19 Join Date: Jun 2007 Posts: 301 Location: User is: OffLine	Re: Project ~ stock floored on 22s rad.........
	[Reply w/Quote]

02-01-2008, 01:21 AM	#821
layinbody31 Center your wheels! Age: 22 Join Date: Jul 2004 Posts: 9,180 Location: Griffith, IN User is: OffLine	Re: Project ~ stock floored on 22s I got those kinda pics too haha
	[Reply w/Quote]

02-01-2008, 02:24 AM	#822
snakenet Now bodydroped on 20s!! Age: 20 Join Date: Jul 2006 Posts: 779 Location: West Sacramento User is: OffLine	Re: Project ~ stock floored on 22s that pic was my background for dayyys! i love it!
	[Reply w/Quote]

02-02-2008, 12:38 AM	#823
2ToneS10 Registered User Age: 21 Join Date: Jul 2004 Posts: 1,426 Location: NJ User is: OffLine	Re: Project ~ stock floored on 22s damn i remember that day haha
	[Reply w/Quote]

02-03-2008, 01:58 AM	#824
miniblazinbmx Air ride equipped Age: 24 Join Date: Dec 2005 Posts: 448 Location: Dallas/Ft. Worth, TX User is: OffLine	Re: Project ~ stock floored on 22s badass
	[Reply w/Quote]

02-13-2008, 08:44 PM	#825
downtoearth PPG sprayin' member Age: 21 Join Date: May 2004 Posts: 3,663 Location: Minden, La User is: OffLine	Re: Project ~ stock floored on 22s Lowdime!!! I finally got my f ucking coys and through all that trouble they sent me the wrong backspacing. They sent me 5" I dont think it will lay out without having crazy negative camber...I figured youd be the guy to ask, so let me know. Thanks
	[Reply w/Quote]

02-16-2008, 10:31 AM	#826
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s damn... i had problems with my 5.5" offset wheels. i don't think those are going to work without a ton of shims man. what size are they? also are you body dropped?
	[Reply w/Quote]

02-16-2008, 06:50 PM	#827
downtoearth PPG sprayin' member Age: 21 Join Date: May 2004 Posts: 3,663 Location: Minden, La User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by lowdime96 damn... i had problems with my 5.5" offset wheels. i don't think those are going to work without a ton of shims man. what size are they? also are you body dropped? 22's Yeah I'm body dropped with a Northstar and it is 100% not gonna work tires are gonna be close enough to cam covers 5.5 let alone 5. I'm sending back monday, they are paying for shipping both ways.
	[Reply w/Quote]

02-16-2008, 07:34 PM	#828
s10sixteynine lets get hammered Join Date: Mar 2007 Posts: 2,067 Location: anniston, al User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by downtoearth 22's Yeah I'm body dropped with a Northstar and it is 100% not gonna work tires are gonna be close enough to cam covers 5.5 let alone 5. I'm sending back monday, they are paying for shipping both ways. i just did some test fitting and the 5s will work on the back, pushed em out right to the bed side lip, i dont think im gonna have to trim it any but i might just in case
	[Reply w/Quote]

02-25-2008, 05:48 AM	#829
SLAMnoma95 SK= Midwest's Elite Age: 21 Join Date: Feb 2003 Posts: 4,941 Location: Detroit User is: OffLine	Re: Project ~ stock floored on 22s 5" wide whitewalls im pretty sure are rated for like 50mph... my buddy steve (Trucks_69) has a skinny white wall in the front of his truck and i swear it looks like a wagon going downhill too fast over 55mph.
	[Reply w/Quote]

02-25-2008, 03:23 PM	#830
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s yeah if i get the white walls chances are i am going to have to get radial not biased. for now i might get just some port-o-walls off ebay for $40 and put those over my stock tires.
	[Reply w/Quote]

03-19-2008, 01:20 AM	#831
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s well i'm working on this bitch again. i want to get it ready for warm weather! Here is my list • I scored a 98+ rear bumper i'm going to put on her. • finishing the bed • new front bumper • fix my frame horns • new fenders • new noma hood • get the interior lookin nice nice • repaint the truck stock color • 20's down the road. Set up shop back at my house: She looks sad but sexy also, one of my friends is begging me to sell it for $4500 as is. still not sure if i want to let it go to start a new project. i will know for sure by the end of the week. Last edited by lowdime96 : 03-19-2008 at 01:23 AM.
	[Reply w/Quote]

03-19-2008, 02:02 AM	#832
snakenet Now bodydroped on 20s!! Age: 20 Join Date: Jul 2006 Posts: 779 Location: West Sacramento User is: OffLine	Re: Project ~ stock floored on 22s <quote> also, one of my friends is begging me to sell it for $4500 as is. still not sure if i want to let it go to start a new project. i will know for sure by the end of the week.[/quote] DONT SELL IT! NO NO NO. this is one of my favorite trucks on the whole forum, and for all the work youv done to make this truck lay on gigantic wheels with a bd, i would have to forum slap you for selling it!
	[Reply w/Quote]

03-19-2008, 12:04 PM	#833
antibling97 Registered User Join Date: Apr 2006 Posts: 105 Location: User is: OffLine	Re: Project ~ stock floored on 22s nice jeep. dont sell it you'll regret it.
	[Reply w/Quote]