Project ~ stock floored on 22s

96dragginSdime · 07-11-2007, 08:59 AM

Quote: Originally Posted by lowdime96

also i have another problem. When my truck is running the egr valve hits the wiper motor. I know a lot of newer trucks don't run egr's..... But id like to keep mine due to strict emission requirements in my state. I also want to keep my wiper motor! Are there any mods that i can do? the very corner of the motor hits the egr.

Sam nigels_world had the same problem (as do I but I don't think mine hits) What he did was make a flat plate to bolt onto the egr mount, and another flat plate to bolt onto the egr itself. drill the approriate size hole in each and then weld a bent tube inbetween. So basically imagine little single cylinder exhaust manifold flanges. you need to make two and weld some tubing between. Buy two egr gaskets and your done

lowdime96 · 07-11-2007, 12:40 PM

Quote: Originally Posted by throwinsparks89

i lengthened my harness as well and it turns over and all but the fuel pump wont kick on. I hooked 12volts straight to the fuel pump connectons and it tunrs on just fine so i have to follow the wire to the front and find out whats goin on. My lights are all tweaked out to. My dash speakers buzz but when you turn the headlights on the buzzing stops hahahaha. Those pics are the first time laying it out let alone pulling it out of the garage for about a year.

Also another thing is i dont get shit for lift really. It BARRELLY clears those stocks that are on it. I have slam 6" sd uppers and lowers with drop spindles. I seem to see everyone else getting more lift on a 1st gen layin rocker on stocks.

Your shit is looking really good dude. After doing my truck so far i have a whole new respect for anyone that does this shit. Ive done everything alone so far. Its taking so long and a shit ton of money hahaha

<img src="http://img54.imageshack.us/img54/934...05largesf1.jpg">

<img src="http://img527.imageshack.us/img527/9...08largefr0.jpg">

Sounds exactly like my problem. I thought that i would be able to ditch the wire harness that unclips for my heat but my fuel pump wire ran through it. Just make sure that you have all the origonal wiring hooked up on the truck, and if you extended any wires look if you doubled up colors that you may have switched. my truck's hayes manual had a real nice fuel pump diagram in the back of the book with the wiring coloring and everything. that helped me out a lot.

Quote: Originally Posted by 96dragginSdime

Sam nigels_world had the same problem (as do I but I don't think mine hits) What he did was make a flat plate to bolt onto the egr mount, and another flat plate to bolt onto the egr itself. drill the approriate size hole in each and then weld a bent tube inbetween. So basically imagine little single cylinder exhaust manifold flanges. you need to make two and weld some tubing between. Buy two egr gaskets and your done

That sounds like a damn good idea. I might try doing something like that. mine barly hits i can even run the engine but you can feel the added vibration from them hitting. I only need to get it like 1/4" away.

dawgnutz · 07-11-2007, 12:53 PM

Quote:

That sounds like a damn good idea. I might try doing something like that. mine barly hits i can even run the engine but you can feel the added vibration from them hitting. I only need to get it like 1/4" away.

B.F.H. ? Just kidding, the Flanged pipe idea sounds cool. LOL!

dagreenmonster · 07-11-2007, 03:49 PM

hey pat does the egr hit where the wiring plugs into the wiper motor?? thats where mine hit. what we did was take the wires out of the plug, and then solder them into the wiper motor where they wouldve plugged in normally...u get what im sayin??

lowdime96 · 07-11-2007, 06:13 PM

na its hitting the actual wiper motor the plug isn't even in.

dagreenmonster · 07-11-2007, 06:19 PM

hmmm....ive seen people turn the wiper motor upwards a little bit too

lowdime96 · 07-12-2007, 01:02 AM

i drove the the truck around into my backyard and threw the bed on today! haha looks funny not being bded. Tomarrow i'm driving the truck down the street to my new shop. maybe i will get some pics up with the truck in the shop.

dart_06 · 07-12-2007, 02:18 AM

Quote: Originally Posted by lowdime96

i drove the the truck around into my backyard and threw the bed on today! haha looks funny not being bded. Tomarrow i'm driving the truck down the street to my new shop. maybe i will get some pics up with the truck in the shop.

COOL!!! cant wait!!!!

shade_tree_slmd · 07-12-2007, 01:42 PM

pics pics pics!

1low-first-gen86 · 07-12-2007, 11:27 PM

yo we need some pics

lowdime96 · 07-13-2007, 12:10 AM

I drove it to the my new shop today... here are the pics! My front bumper is pretty crooked so be nice.

sadexcuse4s10 · 07-13-2007, 12:33 AM

****in right jigga now you're in business

looks like the complete opposite of my blue truck though, my bed is laying body and cab is up high

Wicked Mayhem · 07-13-2007, 01:00 AM

bad ****in ass.

dart_06 · 07-13-2007, 01:59 AM

looks great!!!!!!!!! lovin it!!!! the red one looks awsome too!! you do great work!!!

dawgnutz · 07-13-2007, 02:18 AM

Thats ****in sic man! Crooked bumper or not! I had to explain to my Lady why your bed was at a different height......it was cool, she was all." Oooohhhh!" LOL!

snakenet · 07-13-2007, 05:49 AM

yay pictures!!!! lookin great bro keep it up!!

jherrell · 07-13-2007, 09:15 AM

looks good brother

keep at it

***DUTN@GAUGE*** · 07-13-2007, 12:31 PM

bad ass, man keep going

got_u_sick · 07-13-2007, 12:36 PM

Daaammn those wheels look huge when its lifted! Looks great man, keep up the good work!

lowdime96 · 07-13-2007, 01:37 PM

thanks guys!

BIGGERISBETTER · 07-13-2007, 01:37 PM

your uhh.. bed doesnt line up...

jherrell · 07-13-2007, 01:59 PM

Quote: Originally Posted by BIGGERISBETTER

your uhh.. bed doesnt line up...

there is always one in every crowd

83blazerlaynframe · 07-13-2007, 02:49 PM

holy big wheels batman..

that gets good lift.

are those 22s?

jherrell · 07-13-2007, 03:26 PM

Quote: Originally Posted by 83blazerlaynframe

holy big wheels batman..

that gets good lift.

are those 22s?

ok, so there are two in this crowd...

yo, 83blazerlaynframe, read the title of the thread.... duh

2 LayLo · 07-13-2007, 03:41 PM

x2 lol

Mr Blue · 07-13-2007, 03:51 PM

throwinsparks89 · 07-13-2007, 04:00 PM

y the **** dont i get lift like that, i have the same front setup as you i think, mabey my shocks are maxed out

SD uppers and lowers, slams rs 62, with hardbody shocks

~~Jerid~~ · 07-13-2007, 04:01 PM

lol, good job on it bro, and glad to see that you have a new shop to work in! btw, i love coy's

jherrell · 07-13-2007, 04:02 PM

Quote: Originally Posted by throwinsparks89

y the **** dont i get lift like that, i have the same front setup as you i think, mabey my shocks are maxed out

SD uppers and lowers, slams rs 62, with hardbody shocks

slam re6 vs slam re7s????

I think he is running re7s... if not, my bad

idragbodys10 · 07-13-2007, 06:28 PM

looks good!

dagreenmonster · 07-13-2007, 06:36 PM

i think he does have re-7s

07-11-2007, 08:59 AM	#501
96dragginSdime Some Day Age: 22 Join Date: Sep 2003 Posts: 5,603 Location: Pittsburgh PA User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by lowdime96 also i have another problem. When my truck is running the egr valve hits the wiper motor. I know a lot of newer trucks don't run egr's..... But id like to keep mine due to strict emission requirements in my state. I also want to keep my wiper motor! Are there any mods that i can do? the very corner of the motor hits the egr. Sam nigels_world had the same problem (as do I but I don't think mine hits) What he did was make a flat plate to bolt onto the egr mount, and another flat plate to bolt onto the egr itself. drill the approriate size hole in each and then weld a bent tube inbetween. So basically imagine little single cylinder exhaust manifold flanges. you need to make two and weld some tubing between. Buy two egr gaskets and your done
	[Reply w/Quote]

07-11-2007, 12:40 PM	#502
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by throwinsparks89 i lengthened my harness as well and it turns over and all but the fuel pump wont kick on. I hooked 12volts straight to the fuel pump connectons and it tunrs on just fine so i have to follow the wire to the front and find out whats goin on. My lights are all tweaked out to. My dash speakers buzz but when you turn the headlights on the buzzing stops hahahaha. Those pics are the first time laying it out let alone pulling it out of the garage for about a year. Also another thing is i dont get shit for lift really. It BARRELLY clears those stocks that are on it. I have slam 6" sd uppers and lowers with drop spindles. I seem to see everyone else getting more lift on a 1st gen layin rocker on stocks. Your shit is looking really good dude. After doing my truck so far i have a whole new respect for anyone that does this shit. Ive done everything alone so far. Its taking so long and a shit ton of money hahaha <img src="http://img54.imageshack.us/img54/934...05largesf1.jpg"> <img src="http://img527.imageshack.us/img527/9...08largefr0.jpg"> Sounds exactly like my problem. I thought that i would be able to ditch the wire harness that unclips for my heat but my fuel pump wire ran through it. Just make sure that you have all the origonal wiring hooked up on the truck, and if you extended any wires look if you doubled up colors that you may have switched. my truck's hayes manual had a real nice fuel pump diagram in the back of the book with the wiring coloring and everything. that helped me out a lot. Quote: Originally Posted by 96dragginSdime Sam nigels_world had the same problem (as do I but I don't think mine hits) What he did was make a flat plate to bolt onto the egr mount, and another flat plate to bolt onto the egr itself. drill the approriate size hole in each and then weld a bent tube inbetween. So basically imagine little single cylinder exhaust manifold flanges. you need to make two and weld some tubing between. Buy two egr gaskets and your done That sounds like a damn good idea. I might try doing something like that. mine barly hits i can even run the engine but you can feel the added vibration from them hitting. I only need to get it like 1/4" away. Last edited by lowdime96 : 07-11-2007 at 12:48 PM.
	[Reply w/Quote]

07-11-2007, 12:53 PM	#503
dawgnutz The Werk Truck Age: 28 Join Date: Feb 2002 Posts: 2,846 Location: Huntington Beach, Ca. User is: OffLine	Re: Project ~ stock floored on 22s Quote: That sounds like a damn good idea. I might try doing something like that. mine barly hits i can even run the engine but you can feel the added vibration from them hitting. I only need to get it like 1/4" away. B.F.H. ? Just kidding, the Flanged pipe idea sounds cool. LOL!
	[Reply w/Quote]

07-11-2007, 03:49 PM	#504
dagreenmonster It's all rattle canned Age: 23 Join Date: Jul 2003 Posts: 10,967 Location: Long Island, NY User is: OffLine	Re: Project ~ stock floored on 22s hey pat does the egr hit where the wiring plugs into the wiper motor?? thats where mine hit. what we did was take the wires out of the plug, and then solder them into the wiper motor where they wouldve plugged in normally...u get what im sayin??
	[Reply w/Quote]

07-11-2007, 06:13 PM	#505
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s na its hitting the actual wiper motor the plug isn't even in.
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

07-11-2007, 06:19 PM	#506
dagreenmonster It's all rattle canned Age: 23 Join Date: Jul 2003 Posts: 10,967 Location: Long Island, NY User is: OffLine	Re: Project ~ stock floored on 22s hmmm....ive seen people turn the wiper motor upwards a little bit too
	[Reply w/Quote]

07-12-2007, 01:02 AM	#507
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s i drove the the truck around into my backyard and threw the bed on today! haha looks funny not being bded. Tomarrow i'm driving the truck down the street to my new shop. maybe i will get some pics up with the truck in the shop.
	[Reply w/Quote]

07-12-2007, 02:18 AM	#508
dart_06 live.. die.. nN get drunk Age: 21 Join Date: Feb 2007 Posts: 1,043 Location: orlando fl User is: OffLine	Re: Project ~ stock floored on 22s Quote: Originally Posted by lowdime96 i drove the the truck around into my backyard and threw the bed on today! haha looks funny not being bded. Tomarrow i'm driving the truck down the street to my new shop. maybe i will get some pics up with the truck in the shop. COOL!!! cant wait!!!!
	[Reply w/Quote]

07-12-2007, 01:42 PM	#509
shade_tree_slmd Reaching Nulowz Age: 24 Join Date: Jul 2004 Posts: 814 Location: Fort Meade, MD User is: OffLine	Re: Project ~ stock floored on 22s pics pics pics!
	[Reply w/Quote]

07-12-2007, 11:27 PM	#510
1low-first-gen86 Registered User Age: 21 Join Date: Jun 2005 Posts: 24 Location: User is: OffLine	Re: Project ~ stock floored on 22s yo we need some pics
	[Reply w/Quote]

07-13-2007, 12:10 AM	#511
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s I drove it to the my new shop today... here are the pics! My front bumper is pretty crooked so be nice.
	[Reply w/Quote]

07-13-2007, 12:33 AM	#512
sadexcuse4s10 Hoods are overrated Age: 25 Join Date: Apr 2004 Posts: 9,680 Location: Lexington, NC User is: OffLine	Re: Project ~ stock floored on 22s ****in right jigga now you're in business looks like the complete opposite of my blue truck though, my bed is laying body and cab is up high
	[Reply w/Quote]

07-13-2007, 01:00 AM	#513
Wicked Mayhem i wouldnt undertsand Age: 20 Join Date: Nov 2002 Posts: 13,755 Location: League City, Texas User is: Online	Re: Project ~ stock floored on 22s bad ****in ass.
	[Reply w/Quote]

07-13-2007, 01:59 AM	#514
dart_06 live.. die.. nN get drunk Age: 21 Join Date: Feb 2007 Posts: 1,043 Location: orlando fl User is: OffLine	Re: Project ~ stock floored on 22s looks great!!!!!!!!! lovin it!!!! the red one looks awsome too!! you do great work!!!
	[Reply w/Quote]

07-13-2007, 02:18 AM	#515
dawgnutz The Werk Truck Age: 28 Join Date: Feb 2002 Posts: 2,846 Location: Huntington Beach, Ca. User is: OffLine	Re: Project ~ stock floored on 22s Thats ****in sic man! Crooked bumper or not! I had to explain to my Lady why your bed was at a different height......it was cool, she was all." Oooohhhh!" LOL!
	[Reply w/Quote]

07-13-2007, 05:49 AM	#516
snakenet Now bodydroped on 20s!! Age: 20 Join Date: Jul 2006 Posts: 779 Location: West Sacramento User is: OffLine	Re: Project ~ stock floored on 22s yay pictures!!!! lookin great bro keep it up!!
	[Reply w/Quote]

07-13-2007, 09:15 AM	#517
jherrell SLASH - S.I.C. St. Louis Age: 35 Join Date: Apr 2004 Posts: 1,891 Location: Shiloh, IL User is: Online	Re: Project ~ stock floored on 22s looks good brother keep at it
	[Reply w/Quote]

07-13-2007, 12:31 PM	#518
*DUTN@GAUGE* DOWNSTAIRS Join Date: Mar 2007 Posts: 1,178 Location: Avon, IN User is: OffLine	Re: Project ~ stock floored on 22s bad ass, man keep going
	[Reply w/Quote]

07-13-2007, 12:36 PM	#519
got_u_sick PUNISHING GROUNDS Age: 24 Join Date: Feb 2006 Posts: 3,325 Location: Kentucky User is: OffLine	Re: Project ~ stock floored on 22s Daaammn those wheels look huge when its lifted! Looks great man, keep up the good work!
	[Reply w/Quote]

07-13-2007, 01:37 PM	#520
lowdime96 Disturbed Image Trucks Age: 23 Join Date: Nov 2004 Posts: 5,215 Location: Southington, CT User is: OffLine	Re: Project ~ stock floored on 22s thanks guys!
	[Reply w/Quote]

07-13-2007, 01:37 PM	#521
BIGGERISBETTER flat blue and layin frame Age: 24 Join Date: Aug 2004 Posts: 5,884 Location: Bolivar, Ohio User is: OffLine	Re: Project ~ stock floored on 22s your uhh.. bed doesnt line up...
	[Reply w/Quote]

07-13-2007, 01:59 PM	#522
jherrell SLASH - S.I.C. St. Louis Age: 35 Join Date: Apr 2004 Posts: 1,891 Location: Shiloh, IL User is: Online	Re: Project ~ stock floored on 22s Quote: Originally Posted by BIGGERISBETTER your uhh.. bed doesnt line up... there is always one in every crowd
	[Reply w/Quote]

07-13-2007, 02:49 PM	#523
83blazerlaynframe i like mine with no shine Join Date: Nov 2003 Posts: 671 Location: macomb, mi User is: OffLine	Re: Project ~ stock floored on 22s holy big wheels batman.. that gets good lift. are those 22s?
	[Reply w/Quote]

07-13-2007, 03:26 PM	#524
jherrell SLASH - S.I.C. St. Louis Age: 35 Join Date: Apr 2004 Posts: 1,891 Location: Shiloh, IL User is: Online	Re: Project ~ stock floored on 22s Quote: Originally Posted by 83blazerlaynframe holy big wheels batman.. that gets good lift. are those 22s? ok, so there are two in this crowd... yo, 83blazerlaynframe, read the title of the thread.... duh
	[Reply w/Quote]

07-13-2007, 03:41 PM	#525
2 LayLo Severed TIES pledge Age: 20 Join Date: Feb 2007 Posts: 565 Location: User is: OffLine	Re: Project ~ stock floored on 22s x2 lol
	[Reply w/Quote]

07-13-2007, 03:51 PM	#526
Mr Blue Its a Blue thing. Age: 23 Join Date: May 2003 Posts: 8,398 Location: ♦♠♣So★Cal♣♠♦ User is: OffLine	Re: Project ~ stock floored on 22s
	[Reply w/Quote]

07-13-2007, 04:00 PM	#527
throwinsparks89 Registered User Age: 23 Join Date: Jan 2007 Posts: 55 Location: Bothell Wa User is: OffLine	Re: Project ~ stock floored on 22s y the **** dont i get lift like that, i have the same front setup as you i think, mabey my shocks are maxed out SD uppers and lowers, slams rs 62, with hardbody shocks
	[Reply w/Quote]

07-13-2007, 04:01 PM	#528
~~Jerid~~ Unemployed Age: 25 Join Date: Dec 2005 Posts: 1,224 Location: Suicidedoors.com User is: OffLine	Re: Project ~ stock floored on 22s lol, good job on it bro, and glad to see that you have a new shop to work in! btw, i love coy's
	[Reply w/Quote]

07-13-2007, 04:02 PM	#529
jherrell SLASH - S.I.C. St. Louis Age: 35 Join Date: Apr 2004 Posts: 1,891 Location: Shiloh, IL User is: Online	Re: Project ~ stock floored on 22s Quote: Originally Posted by throwinsparks89 y the **** dont i get lift like that, i have the same front setup as you i think, mabey my shocks are maxed out SD uppers and lowers, slams rs 62, with hardbody shocks slam re6 vs slam re7s???? I think he is running re7s... if not, my bad
	[Reply w/Quote]

07-13-2007, 06:28 PM	#530
idragbodys10 Registered User Age: 24 Join Date: Mar 2004 Posts: 2,521 Location: Akron, Ohio User is: Online	Re: Project ~ stock floored on 22s looks good!
	[Reply w/Quote]

07-13-2007, 06:36 PM	#531
dagreenmonster It's all rattle canned Age: 23 Join Date: Jul 2003 Posts: 10,967 Location: Long Island, NY User is: OffLine	Re: Project ~ stock floored on 22s i think he does have re-7s
	[Reply w/Quote]

07-13-2007, 08:40 PM	#532
purevil115 Registered User Age: 21 Join Date: Feb 2006 Posts: 1,968 Location: lousiville, Ohio User is: OffLine