Project: Right Hand Drive

***fetuss10*** · 05-10-2007, 03:45 PM

that at school?

~~carney725~~ · 05-10-2007, 04:21 PM

damn where are the updates?

laydoutjimmy · 05-10-2007, 05:22 PM

damn bro vette rear is looking bad ass. Im running a vette irs in my shit also actually dropped the half shafts off today. If u dont mind how much did it run you to get em shorten i got three prices 220 240 and 165 to have em both shortened 4" and rebalanced. Also how are those long ass bars working out for ya id imagine the wheel probably dosent move forward while lifting much at all

Chris H. · 05-10-2007, 06:08 PM

the long bars are def. key the shafts were like 50 bucks a piece to shorten.....the tank is kinda low but my roll pan will hit first theres no possible way for it to hit..

yea its up at school...

Thanks guys

Chris

laydoutjimmy · 05-10-2007, 06:23 PM

damn dude 100 bucks thats whats up does that include balancein or no? Im thinking bout running long bars to prob not quite as long as yours tho lol maybe around 20" or so

Chris H. · 05-10-2007, 11:04 PM

yea that included everything...they do 50 bucks flat with no u joint replacement....

Chris

***fetuss10*** · 05-11-2007, 01:52 AM

Quote: Originally Posted by Chris H.

yea that included everything...they do 50 bucks flat with no u joint replacement....

Chris

u street rod or chassis fab? i just got a 5'6 drop for my silverado and need the notches cut out once its on there b9lt on notches i but i need it trimmed still so if u have time ill give it to ya for a day haha

Chris H. · 05-11-2007, 05:35 AM

yea i can do it for ya, but itll be two weeks now since were starting second phase...but yea in two weeks stop by the very end chassis fab shop.....

Chris

Chris H. · 06-05-2007, 05:24 AM

got a couple things goin on finally....truck will leave school not this friday but next then i grad after the following week.....so ill be home gettin a ton more done on it.....yesterday i got the hardline ran to the back from the front and started welding the tabs on the spindles for the anti bars....

Chris

89droped5/6 · 06-05-2007, 08:57 AM

Damn dude that shitt is lookin killer!

drps10 · 06-05-2007, 04:48 PM

dang u got alot more done.. looking real good!

Chris H. · 06-05-2007, 06:31 PM

thanks guys!! more updates soon!

AVdime · 07-24-2007, 05:36 PM

bump i wanna see some updates!

xtremestylez · 07-25-2007, 10:57 PM

looks sick

NCHEVYHEVN · 07-26-2007, 10:54 AM

***fetuss10*** · 07-26-2007, 02:38 PM

chris where the hell did u go?

shade_tree_slmd · 07-28-2007, 01:42 AM

updates?

sweetness420 · 11-26-2007, 11:52 PM

So Low Roller · 11-26-2007, 11:53 PM

slappy mcnasty already beat you to the right hand drive

Slappy McNasty · 11-27-2007, 07:41 AM

by far the baddest modification anyone can do is right hand drive their trucks. anyone from a 4 year old to a 80 year old can see the joy of an american made truck and the driver driving on the "other side". either parked, driving 60 or draggin the shit outta it, people gawk like a fat bitch on a big wheel.........

circa · 11-27-2007, 10:10 AM

weird i had a dream last night my truck was RHD

Baggd · 11-27-2007, 05:05 PM

anything new?

FCKNLOW · 11-27-2007, 06:30 PM

absolutly nothing unfortunatly.....hes lookin for a shop now.

ohsolos10 · 11-27-2007, 09:47 PM

wasnt this just posted in the classifieds

cbennett · 11-27-2007, 10:19 PM

Quote: Originally Posted by ohsolos10

wasnt this just posted in the classifieds

X2

Lowsonoma03 · 07-02-2008, 08:18 PM

Yeah old thread. but i saw some people asking about RHD and shit, so i did some research. It was sold to a friend for some reasons, see the whole story and watch the rest of the build here...
http://www.dropndrag.com/dnd/viewtop...st=0&sk=t&sd=a

***fetuss10*** · 07-02-2008, 11:08 PM

chris sold it apparently and this other kid is finishing it.

Lowsonoma03 · 07-03-2008, 11:00 AM

that is correct

05-10-2007, 04:21 PM	#352
~~carney725~~ Banned Join Date: Aug 2006 Posts: 174 Location: User is: OffLine	Re: Project: Right Hand Drive damn where are the updates?
	[Reply w/Quote]

05-10-2007, 05:22 PM	#353
laydoutjimmy Layd the **** out Age: 20 Join Date: Jul 2006 Posts: 676 Location: Baltimore MD User is: OffLine	Re: Project: Right Hand Drive damn bro vette rear is looking bad ass. Im running a vette irs in my shit also actually dropped the half shafts off today. If u dont mind how much did it run you to get em shorten i got three prices 220 240 and 165 to have em both shortened 4" and rebalanced. Also how are those long ass bars working out for ya id imagine the wheel probably dosent move forward while lifting much at all
	[Reply w/Quote]

05-10-2007, 06:08 PM	#354
Chris H. Mini Trucker... Age: 20 Join Date: Dec 2004 Posts: 1,467 Location: PA User is: OffLine	Re: Project: Right Hand Drive the long bars are def. key the shafts were like 50 bucks a piece to shorten.....the tank is kinda low but my roll pan will hit first theres no possible way for it to hit.. yea its up at school... Thanks guys Chris
	[Reply w/Quote]

05-10-2007, 06:23 PM	#355
laydoutjimmy Layd the **** out Age: 20 Join Date: Jul 2006 Posts: 676 Location: Baltimore MD User is: OffLine	Re: Project: Right Hand Drive damn dude 100 bucks thats whats up does that include balancein or no? Im thinking bout running long bars to prob not quite as long as yours tho lol maybe around 20" or so
	[Reply w/Quote]

05-10-2007, 11:04 PM	#356
Chris H. Mini Trucker... Age: 20 Join Date: Dec 2004 Posts: 1,467 Location: PA User is: OffLine	Re: Project: Right Hand Drive yea that included everything...they do 50 bucks flat with no u joint replacement.... Chris
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

05-11-2007, 05:35 AM	#358
Chris H. Mini Trucker... Age: 20 Join Date: Dec 2004 Posts: 1,467 Location: PA User is: OffLine	Re: Project: Right Hand Drive yea i can do it for ya, but itll be two weeks now since were starting second phase...but yea in two weeks stop by the very end chassis fab shop..... Chris
	[Reply w/Quote]

06-05-2007, 05:24 AM	#359
Chris H. Mini Trucker... Age: 20 Join Date: Dec 2004 Posts: 1,467 Location: PA User is: OffLine	Re: Project: Right Hand Drive got a couple things goin on finally....truck will leave school not this friday but next then i grad after the following week.....so ill be home gettin a ton more done on it.....yesterday i got the hardline ran to the back from the front and started welding the tabs on the spindles for the anti bars.... Chris
	[Reply w/Quote]

06-05-2007, 08:57 AM	#360
89droped5/6 HalfBagged Dragger Age: 24 Join Date: Sep 2003 Posts: 1,176 Location: Stroudsburg, PA User is: OffLine	Re: Project: Right Hand Drive Damn dude that shitt is lookin killer!
	[Reply w/Quote]

06-05-2007, 04:48 PM	#361
drps10 !! TALK NOW !! Age: 23 Join Date: Oct 2002 Posts: 4,561 Location: Northern Ohio User is: OffLine	Re: Project: Right Hand Drive dang u got alot more done.. looking real good!
	[Reply w/Quote]

06-05-2007, 06:31 PM	#362
Chris H. Mini Trucker... Age: 20 Join Date: Dec 2004 Posts: 1,467 Location: PA User is: OffLine	Re: Project: Right Hand Drive thanks guys!! more updates soon!
	[Reply w/Quote]

07-24-2007, 05:36 PM	#363
AVdime Big Bully Age: 24 Join Date: May 2007 Posts: 1,245 Location: User is: OffLine	Re: Project: Right Hand Drive bump i wanna see some updates!
	[Reply w/Quote]

07-25-2007, 10:57 PM	#364
xtremestylez Can I drag it???? Age: 25 Join Date: Jan 2006 Posts: 673 Location: User is: OffLine	Re: Project: Right Hand Drive looks sick
	[Reply w/Quote]

07-26-2007, 10:54 AM	#365
NCHEVYHEVN S-series addict Age: 22 Join Date: Nov 2003 Posts: 8,990 Location: Creedmoor, NC User is: OffLine	Re: Project: Right Hand Drive Nice
	[Reply w/Quote]

07-28-2007, 01:42 AM	#367
shade_tree_slmd Reaching Nulowz Age: 24 Join Date: Jul 2004 Posts: 814 Location: Fort Meade, MD User is: OffLine	Re: Project: Right Hand Drive updates?
	[Reply w/Quote]

11-26-2007, 11:52 PM	#368
sweetness420 Registered User Age: 24 Join Date: Jun 2006 Posts: 207 Location: jacksonville,fl User is: OffLine	Re: Project: Right Hand Drive bump
	[Reply w/Quote]

11-26-2007, 11:53 PM	#369
So Low Roller SPARK IT OR PARK IT! Age: 23 Join Date: Nov 2004 Posts: 1,869 Location: visalia User is: OffLine	Re: Project: Right Hand Drive slappy mcnasty already beat you to the right hand drive
	[Reply w/Quote]

11-27-2007, 07:41 AM	#370
Slappy McNasty trailers r 4 boats p*ssys Join Date: Aug 2005 Posts: 1,839 Location: sunny cali User is: OffLine	Re: Project: Right Hand Drive by far the baddest modification anyone can do is right hand drive their trucks. anyone from a 4 year old to a 80 year old can see the joy of an american made truck and the driver driving on the "other side". either parked, driving 60 or draggin the shit outta it, people gawk like a fat bitch on a big wheel.........
	[Reply w/Quote]

11-27-2007, 10:10 AM	#371
circa Registered Abuser Age: 21 Join Date: Jun 2006 Posts: 773 Location: Puyallup User is: OffLine	Re: Project: Right Hand Drive weird i had a dream last night my truck was RHD
	[Reply w/Quote]

11-27-2007, 05:05 PM	#372
Baggd un banned Age: 26 Join Date: Oct 2003 Posts: 9,230 Location: north jersey User is: OffLine	Re: Project: Right Hand Drive anything new?
	[Reply w/Quote]

11-27-2007, 06:30 PM	#373
FCKNLOW re-bodydroppin Age: 20 Join Date: Mar 2005 Posts: 8,247 Location: Mechanicsburg, Pa User is: OffLine	Re: Project: Right Hand Drive absolutly nothing unfortunatly.....hes lookin for a shop now.
	[Reply w/Quote]

11-27-2007, 09:47 PM	#374
ohsolos10 sawzall's are cool Age: 30 Join Date: Dec 2002 Posts: 2,298 Location: holloman afb nm User is: OffLine	Re: Project: Right Hand Drive wasnt this just posted in the classifieds
	[Reply w/Quote]

11-27-2007, 10:19 PM	#375
cbennett yep Age: 22 Join Date: Jul 2004 Posts: 128 Location: Avon IN> User is: OffLine	Re: Project: Right Hand Drive Quote: Originally Posted by ohsolos10 wasnt this just posted in the classifieds X2
	[Reply w/Quote]

07-02-2008, 08:18 PM	#376
Lowsonoma03 Is EXHAUSTED Age: 23 Join Date: Jan 2004 Posts: 7,141 Location: Erie, PA User is: OffLine	Re: Project: Right Hand Drive Yeah old thread. but i saw some people asking about RHD and shit, so i did some research. It was sold to a friend for some reasons, see the whole story and watch the rest of the build here... http://www.dropndrag.com/dnd/viewtop...st=0&sk=t&sd=a
	[Reply w/Quote]

07-03-2008, 11:00 AM	#378
Lowsonoma03 Is EXHAUSTED Age: 23 Join Date: Jan 2004 Posts: 7,141 Location: Erie, PA User is: OffLine	Re: Project: Right Hand Drive that is correct
	[Reply w/Quote]

**Project: Right Hand Drive**

Project: Right Hand Drive

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)