Project BD stevo's ride

97bagdS10 · 10-26-2007, 12:49 AM

shes home in my garage now. after about one and a half years a bed might be going on it lol. and the interior is out for me to fiberglass this winter. ill probably keep this as my project thread for the interior and bed sheetmetal. going to start tomorrow with taking the old bedfloor out and placing it over my rear frame to start taking dimensions

Draggin97 · 10-28-2007, 09:04 PM

heres my final pics on this truck-

nfamus10 · 10-28-2007, 09:30 PM

looks great bro. you think i can fit my v6 under that 2nd gen hood with the ac? i cant wait to see the truck with interior, and doors haha.

Draggin97 · 10-28-2007, 09:38 PM

Quote: Originally Posted by nfamus10

looks great bro. you think i can fit my v6 under that 2nd gen hood with the ac? i cant wait to see the truck with interior, and doors haha.

yeah its deff. possible, i have already done an intake bonnet on that motor so i know that can be done. Did i ever show you the pics of the IF customs truck that had A/C and the stock hood? Oh and you have to move or section the power steering fill tube as well. Hit me up with a pm if you need anything man.

Draggin97 · 05-06-2008, 02:44 PM

double post

Draggin97 · 05-06-2008, 02:46 PM

I finally got the bed from steven and i have been getting it setup for sheetmetal-
http://www.axcessmypics.com/photos/p...1b46005e36.jpg
My digital camera got stolen and i have no idea how to post theses links as pics.

MiniTruckMafia · 05-06-2008, 09:45 PM

Looks great! I was wondering if someone could clear up a question that has been bothering me for a while....When doing a stock floor body drop....what would be the least thickness of steel that could be used for the frame rails? I read in a 'sport truck' magazine that I have about 1/8 inch 2x3 being used...and that made me wonder if it would be sufficient enough to use....Im putting a v8 on it, and didnt know if the frame rails would need to be thicker than 1/8 inch....sorry to whore your thread....I seen this thread and thought I would probably get a good answer here...thanks for any help

SSKJason · 05-06-2008, 09:50 PM

i would personally say no less than 3/16 wall for anything, but if your doin a small block, go with 1/4,and no less than 2x3 tubing. you could even do 3x3 under the cab goin into 2x3 for a back half

Draggin97 · 05-06-2008, 10:52 PM

werd 3/3 at least 3/16" wall under the cab and 2/3 3/16 wall is probably plenty for the rear.

blazed00 · 05-07-2008, 10:07 AM

nice i love your truckk

MiniTruckMafia · 05-07-2008, 11:30 AM

Thanks! I had thought about the 3x 1/4'' but it seemed so thick...so maybe I will go with the 3/16 2x3...might be a little easier to work with. Another thing I had been thinking about was attaching the new rails to the front frame clip....its a big difference in wall thickness....so what could I do to give it all the support at the meeting point? I didnt want to just cover it in some sheet metal...I figure alot of pressure would be at the meeting point, and want to give it the best support I can...any Ideas? Thanks again for all the info....Im sorry again to keep whoring your thread, but I will definately be checking back for updates.

Draggin97 · 05-11-2008, 09:23 PM

progress-

dagreenmonster · 05-11-2008, 11:11 PM

lookin good man

krayzkajun · 05-11-2008, 11:38 PM

badass!!!

sadexcuse4s10 · 05-11-2008, 11:53 PM

hell yeah, nice work. makes me want to get out there and work on my bed

Draggin97 · 05-18-2008, 06:40 PM

some more progress-

black_ice_02 · 05-18-2008, 07:25 PM

man the truck is comin along great. def got me debatin on body droppin mine. keep up the good work, I like the clutch pedal

97bagdS10 · 05-18-2008, 11:31 PM

ya zach is doing some great work. getting tired of working on the truck, so after she is up and going it might be for sale. this is also me just bored with it, after i can drive it again i will probably change my mind

Draggin97 · 05-19-2008, 01:05 AM

tired of doing what stevo

you should at least take it to a couple of shows.

83LOWrange · 05-20-2008, 01:19 AM

bored with it? how... put that much work into it and already tired of it? thats not the spirit, set the drivers seat in and speedo and drag it once or twice then park it, lol

97bagdS10 · 05-21-2008, 10:42 PM

i haven't driven this truck in 2 years... thats how but once its done it will be cool.

black_ice_02 · 05-22-2008, 09:40 AM

Quote: Originally Posted by Draggin97

progress-

Is that square stock or square tubing ya usin for the inner bed frame?

do ya have any pics of where you connect the inner bed frame to the actual bed?

I ask cuz there's nothing left of the inside of my bed and debating doing something similar to this

staylow · 05-28-2008, 08:00 PM

nice work man. keep it up.

97bagdS10 · 05-29-2008, 08:04 AM

its 1/2" square stock for the frame, about 125 feet of it lol

black_ice_02 · 05-29-2008, 09:11 AM

Quote: Originally Posted by 97bagdS10

its 1/2" square stock for the frame, about 125 feet of it lol

haha man thats alot. you have any pics where you guys attached it to the bed at the top?

Draggin97 · 05-29-2008, 01:30 PM

here you go man-

black_ice_02 · 05-29-2008, 02:32 PM

awesome that's exactly what i wanted to see. You guys did leave the sides in. thanks alot

97bagdS10 · 05-31-2008, 10:15 AM

how it coming over there zach?

1st-timebodydrop · 06-07-2008, 01:34 AM

that must of taken forever!

97bagdS10 · 06-08-2008, 10:41 AM

lol its hella beefy. im a solid 240lb.'s and i got on top of it and it didnt budge. and it was just sitting on the ground. normally the sides would buckle a bit but nothing. so maybe a spot for a stripper pole will go in lol.

Draggin97 · 06-09-2008, 08:23 AM

getting close to slinging some filler-

bdydrp18 · 06-09-2008, 09:07 AM

looking good!!!

97bagdS10 · 06-15-2008, 12:50 PM

with any luck this will be at the austin heatwave from july 18th to the 20th. so keep your eyes out!

1st-timebodydrop · 06-17-2008, 01:28 AM

hey bro quick question what size gage fillers did u use for the body drop is was planning on useing 16 gage is that good??

10-26-2007, 12:49 AM	#101
97bagdS10 NOW TUCKIN' 20'S Age: 20 Join Date: Aug 2005 Posts: 1,856 Location: Wichita Kansas User is: OffLine	Re: Project BD stevo's ride shes home in my garage now. after about one and a half years a bed might be going on it lol. and the interior is out for me to fiberglass this winter. ill probably keep this as my project thread for the interior and bed sheetmetal. going to start tomorrow with taking the old bedfloor out and placing it over my rear frame to start taking dimensions
	[Reply w/Quote]

10-28-2007, 09:04 PM	#102
Draggin97 progress is slow for now Age: 24 Join Date: Aug 2005 Posts: 2,517 Location: lawrence kansas User is: OffLine	Re: Project BD stevo's ride heres my final pics on this truck-
	[Reply w/Quote]

10-28-2007, 09:30 PM	#103
nfamus10 cRooKed eDge Join Date: Nov 2003 Posts: 1,100 Location: Galveston, Tx User is: OffLine	Re: Project BD stevo's ride looks great bro. you think i can fit my v6 under that 2nd gen hood with the ac? i cant wait to see the truck with interior, and doors haha.
	[Reply w/Quote]

10-28-2007, 09:38 PM	#104
Draggin97 progress is slow for now Age: 24 Join Date: Aug 2005 Posts: 2,517 Location: lawrence kansas User is: OffLine	Re: Project BD stevo's ride Quote: Originally Posted by nfamus10 looks great bro. you think i can fit my v6 under that 2nd gen hood with the ac? i cant wait to see the truck with interior, and doors haha. yeah its deff. possible, i have already done an intake bonnet on that motor so i know that can be done. Did i ever show you the pics of the IF customs truck that had A/C and the stock hood? Oh and you have to move or section the power steering fill tube as well. Hit me up with a pm if you need anything man.
	[Reply w/Quote]

05-06-2008, 02:44 PM	#105
Draggin97 progress is slow for now Age: 24 Join Date: Aug 2005 Posts: 2,517 Location: lawrence kansas User is: OffLine	Re: Project BD stevo's ride double post Last edited by Draggin97 : 05-06-2008 at 02:48 PM.
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

05-06-2008, 02:46 PM	#106
Draggin97 progress is slow for now Age: 24 Join Date: Aug 2005 Posts: 2,517 Location: lawrence kansas User is: OffLine	Re: Project BD stevo's ride I finally got the bed from steven and i have been getting it setup for sheetmetal- http://www.axcessmypics.com/photos/p...1b46005e36.jpg My digital camera got stolen and i have no idea how to post theses links as pics.
	[Reply w/Quote]

05-06-2008, 09:45 PM	#107
MiniTruckMafia drag it BYOTCH! Age: 25 Join Date: Apr 2006 Posts: 208 Location: Raleigh, NC User is: OffLine	Re: Project BD stevo's ride Looks great! I was wondering if someone could clear up a question that has been bothering me for a while....When doing a stock floor body drop....what would be the least thickness of steel that could be used for the frame rails? I read in a 'sport truck' magazine that I have about 1/8 inch 2x3 being used...and that made me wonder if it would be sufficient enough to use....Im putting a v8 on it, and didnt know if the frame rails would need to be thicker than 1/8 inch....sorry to whore your thread....I seen this thread and thought I would probably get a good answer here...thanks for any help
	[Reply w/Quote]

05-06-2008, 09:50 PM	#108
SSKJason Street Spec Kustoms Age: 21 Join Date: Jun 2003 Posts: 224 Location: Spring Grove, PA User is: OffLine	Re: Project BD stevo's ride i would personally say no less than 3/16 wall for anything, but if your doin a small block, go with 1/4,and no less than 2x3 tubing. you could even do 3x3 under the cab goin into 2x3 for a back half
	[Reply w/Quote]

05-06-2008, 10:52 PM	#109
Draggin97 progress is slow for now Age: 24 Join Date: Aug 2005 Posts: 2,517 Location: lawrence kansas User is: OffLine	Re: Project BD stevo's ride werd 3/3 at least 3/16" wall under the cab and 2/3 3/16 wall is probably plenty for the rear.
	[Reply w/Quote]

05-07-2008, 10:07 AM	#110
blazed00 4 door? Age: 20 Join Date: Sep 2006 Posts: 2,149 Location: Wilm, NC User is: OffLine	Re: Project BD stevo's ride nice i love your truckk
	[Reply w/Quote]

05-07-2008, 11:30 AM	#111
MiniTruckMafia drag it BYOTCH! Age: 25 Join Date: Apr 2006 Posts: 208 Location: Raleigh, NC User is: OffLine	Re: Project BD stevo's ride Thanks! I had thought about the 3x 1/4'' but it seemed so thick...so maybe I will go with the 3/16 2x3...might be a little easier to work with. Another thing I had been thinking about was attaching the new rails to the front frame clip....its a big difference in wall thickness....so what could I do to give it all the support at the meeting point? I didnt want to just cover it in some sheet metal...I figure alot of pressure would be at the meeting point, and want to give it the best support I can...any Ideas? Thanks again for all the info....Im sorry again to keep whoring your thread, but I will definately be checking back for updates. Last edited by MiniTruckMafia : 05-07-2008 at 11:36 AM.
	[Reply w/Quote]

05-11-2008, 09:23 PM	#112
Draggin97 progress is slow for now Age: 24 Join Date: Aug 2005 Posts: 2,517 Location: lawrence kansas User is: OffLine	Re: Project BD stevo's ride progress-
	[Reply w/Quote]

05-11-2008, 11:11 PM	#113
dagreenmonster It's all rattle canned Age: 23 Join Date: Jul 2003 Posts: 10,793 Location: Long Island, NY User is: OffLine	Re: Project BD stevo's ride lookin good man
	[Reply w/Quote]

05-11-2008, 11:38 PM	#114
krayzkajun DriveWay Innovations Age: 23 Join Date: Jan 2006 Posts: 171 Location: WestWego, LA User is: OffLine	Re: Project BD stevo's ride badass!!!
	[Reply w/Quote]

05-11-2008, 11:53 PM	#115
sadexcuse4s10 Hoods are overrated Age: 25 Join Date: Apr 2004 Posts: 9,011 Location: Lexington, NC User is: Online	Re: Project BD stevo's ride hell yeah, nice work. makes me want to get out there and work on my bed
	[Reply w/Quote]

05-18-2008, 06:40 PM	#116
Draggin97 progress is slow for now Age: 24 Join Date: Aug 2005 Posts: 2,517 Location: lawrence kansas User is: OffLine	Re: Project BD stevo's ride some more progress-
	[Reply w/Quote]

05-18-2008, 07:25 PM	#117
black_ice_02 Burnt Blazer Age: 24 Join Date: Jun 2004 Posts: 2,167 Location: Houston, tx User is: OffLine	Re: Project BD stevo's ride man the truck is comin along great. def got me debatin on body droppin mine. keep up the good work, I like the clutch pedal
	[Reply w/Quote]

05-18-2008, 11:31 PM	#118
97bagdS10 NOW TUCKIN' 20'S Age: 20 Join Date: Aug 2005 Posts: 1,856 Location: Wichita Kansas User is: OffLine	Re: Project BD stevo's ride ya zach is doing some great work. getting tired of working on the truck, so after she is up and going it might be for sale. this is also me just bored with it, after i can drive it again i will probably change my mind
	[Reply w/Quote]

05-19-2008, 01:05 AM	#119
Draggin97 progress is slow for now Age: 24 Join Date: Aug 2005 Posts: 2,517 Location: lawrence kansas User is: OffLine	Re: Project BD stevo's ride tired of doing what stevo you should at least take it to a couple of shows.
	[Reply w/Quote]

05-20-2008, 01:19 AM	#120
83LOWrange That lil ole Ranger Age: 21 Join Date: Dec 2007 Posts: 461 Location: Louisiana User is: OffLine	Re: Project BD stevo's ride bored with it? how... put that much work into it and already tired of it? thats not the spirit, set the drivers seat in and speedo and drag it once or twice then park it, lol
	[Reply w/Quote]

05-21-2008, 10:42 PM	#121
97bagdS10 NOW TUCKIN' 20'S Age: 20 Join Date: Aug 2005 Posts: 1,856 Location: Wichita Kansas User is: OffLine	Re: Project BD stevo's ride i haven't driven this truck in 2 years... thats how but once its done it will be cool.
	[Reply w/Quote]

05-22-2008, 09:40 AM	#122
black_ice_02 Burnt Blazer Age: 24 Join Date: Jun 2004 Posts: 2,167 Location: Houston, tx User is: OffLine	Re: Project BD stevo's ride Quote: Originally Posted by Draggin97 progress- Is that square stock or square tubing ya usin for the inner bed frame? do ya have any pics of where you connect the inner bed frame to the actual bed? I ask cuz there's nothing left of the inside of my bed and debating doing something similar to this
	[Reply w/Quote]

05-28-2008, 08:00 PM	#123
staylow BUILT BY A POORMAN Join Date: Jan 2007 Posts: 36 Location: User is: OffLine	Re: Project BD stevo's ride nice work man. keep it up.
	[Reply w/Quote]

05-29-2008, 08:04 AM	#124
97bagdS10 NOW TUCKIN' 20'S Age: 20 Join Date: Aug 2005 Posts: 1,856 Location: Wichita Kansas User is: OffLine	Re: Project BD stevo's ride its 1/2" square stock for the frame, about 125 feet of it lol
	[Reply w/Quote]

05-29-2008, 09:11 AM	#125
black_ice_02 Burnt Blazer Age: 24 Join Date: Jun 2004 Posts: 2,167 Location: Houston, tx User is: OffLine	Re: Project BD stevo's ride Quote: Originally Posted by 97bagdS10 its 1/2" square stock for the frame, about 125 feet of it lol haha man thats alot. you have any pics where you guys attached it to the bed at the top?
	[Reply w/Quote]

05-29-2008, 01:30 PM	#126
Draggin97 progress is slow for now Age: 24 Join Date: Aug 2005 Posts: 2,517 Location: lawrence kansas User is: OffLine	Re: Project BD stevo's ride here you go man-
	[Reply w/Quote]

05-29-2008, 02:32 PM	#127
black_ice_02 Burnt Blazer Age: 24 Join Date: Jun 2004 Posts: 2,167 Location: Houston, tx User is: OffLine	Re: Project BD stevo's ride awesome that's exactly what i wanted to see. You guys did leave the sides in. thanks alot
	[Reply w/Quote]

05-31-2008, 10:15 AM	#128
97bagdS10 NOW TUCKIN' 20'S Age: 20 Join Date: Aug 2005 Posts: 1,856 Location: Wichita Kansas User is: OffLine	Re: Project BD stevo's ride how it coming over there zach?
	[Reply w/Quote]

06-07-2008, 01:34 AM	#129
1st-timebodydrop Registered User Age: 19 Join Date: Mar 2008 Posts: 75 Location: Merritt Island FLorida User is: OffLine	Re: Project BD stevo's ride that must of taken forever!
	[Reply w/Quote]

06-08-2008, 10:41 AM	#130
97bagdS10 NOW TUCKIN' 20'S Age: 20 Join Date: Aug 2005 Posts: 1,856 Location: Wichita Kansas User is: OffLine	Re: Project BD stevo's ride lol its hella beefy. im a solid 240lb.'s and i got on top of it and it didnt budge. and it was just sitting on the ground. normally the sides would buckle a bit but nothing. so maybe a spot for a stripper pole will go in lol.
	[Reply w/Quote]

06-09-2008, 08:23 AM	#131
Draggin97 progress is slow for now Age: 24 Join Date: Aug 2005 Posts: 2,517 Location: lawrence kansas User is: OffLine	Re: Project BD stevo's ride getting close to slinging some filler-
	[Reply w/Quote]

06-09-2008, 09:07 AM	#132
bdydrp18 Registered User Age: 30 Join Date: Aug 2007 Posts: 630 Location: corning, NY User is: OffLine	Re: Project BD stevo's ride looking good!!!
	[Reply w/Quote]

06-15-2008, 12:50 PM	#133
97bagdS10 NOW TUCKIN' 20'S Age: 20 Join Date: Aug 2005 Posts: 1,856 Location: Wichita Kansas User is: OffLine	Re: Project BD stevo's ride with any luck this will be at the austin heatwave from july 18th to the 20th. so keep your eyes out!
	[Reply w/Quote]

06-17-2008, 01:28 AM	#134
1st-timebodydrop Registered User Age: 19 Join Date: Mar 2008 Posts: 75 Location: Merritt Island FLorida User is: OffLine	Re: Project BD stevo's ride hey bro quick question what size gage fillers did u use for the body drop is was planning on useing 16 gage is that good??