building a sfbd rolling chassis for the girls 1st gen dime

***fetuss10*** · 01-28-2009, 06:26 AM

subscribe

throwinsparks89 · 01-28-2009, 09:27 PM

why a new rear end?

i noticed your CL add for the KP kit

im broke but i wanna buy it haha

dava flav · 01-28-2009, 10:49 PM

Quote: Originally Posted by throwinsparks89

why a new rear end?

i noticed your CL add for the KP kit

im broke but i wanna buy it haha

why do you wanna buy it lol
the rear end is a friends that im just using for mockup. i need to get one of my own soon too since im gonna be putting that trian. kit on. i just ordered my bars.

dava flav · 02-12-2009, 11:50 PM

gangsta shit

i cut the pinch off and threw some 17s i picked up for 300 with good tires. these will be the daily wheels. youll have to wait and see what wheels i will run for shows
so scrapped my old bed because i didnt like how it turned out.
picking up another bed and 91-93 core support and solid back window sat morning. and a smooth roll pan and grant kustoms skinned tailgate on sunday
so ive got 600 into
wheels and tires
bed and coresupport and back window
and roll pan and skinned gate
i love craigslist

***fetuss10*** · 02-13-2009, 02:08 AM

Looks good man. Your not leaving the gas tank in the bed are you. I hate that unless its a fuel cell.

bdydrp18 · 02-13-2009, 07:32 AM

yeah i would try for the fuel cell too. truck looking good by the way

dava flav · 02-13-2009, 09:36 AM

umm thats the dash lol
and yes there will be a fuell cell behind the axle

Golana · 02-13-2009, 10:27 AM

looking good so far man, i really like that you are doing this all for cheap!

im on a budget build too, so seeing what you can do for so little $$$ is inspiring.

one Q... im going to BD my 92 ext. cab as well (when i feel confident enough), and was wondering why you cut out a channel in the cab for the frame?

pearldrop · 02-13-2009, 08:19 PM

It looks good with the wheels. I will probably regret selling them once I start driving my truck and I have to keep it locked up so I can turn.

throwinsparks89 · 02-13-2009, 09:46 PM

dood we should hang out, wanna go draggin? can i post pics of your girl? can you feed me? can i watch tv? wanna hold hands while we work on your truck????????

oh ya, truck looks ghettofab

dava flav · 02-13-2009, 10:20 PM

you know thats gonna start some shit drew lol!!!!

the holes in the floor are cus its a stock floor body drop and that part of the floor when you lay rocker, the frame is higher than the floor so the frame comes through the cab about 1/2 of an inch

thanks again for the wheels chris.. my girl breanna didnt like em at first but when i put them on she said they look good.
les shwab is crackin down so shawn said i have to pay but he only charged me for balancing lol

dava flav · 02-15-2009, 12:36 AM

dava flav · 02-21-2009, 08:52 PM

got the bed structure almost done. i just need to add more bracing to the floor area to strengthen it. the bedsides are all supported super strong. i hate flimsy bedsides.got the roll pan started. gotta take the skin off the old gate and put it on my gate and shave the slant box. i narrowed the front of the bed to match the back pillar cuz it slants in. its not the ideal way to do it but i just want the lines to match up. so yeah the truck is slightly narrower right there but it looks better imo. and a lot easier than pie cutting the pillar and pulling it out to match the bed lol.
gonna start on the cab floor tomm. hopefully

also picked up a 91-93 coresupport so i can run this badboy

dava flav · 02-22-2009, 08:21 PM

just for referance the 4runner is not lifted and is sitting on 28" tires lol
and my driveway is very slanted. nothing is bolted down onthe truck no bed bolts cab bolts or coresupport bolts

***fetuss10*** · 02-22-2009, 09:32 PM

i love those 4 runners

dava flav · 02-24-2009, 12:14 AM

serioulsy thats all you have to say

so the bed i think is gonna turn out pretty sweet. my goal is to get it as close to possible to thenotch. but the frames on these curve up towards the notch. so infront of the notch the last little section has a 10* pitch upwards mostly to clear the gas tank crossmember and it clears by a 1/16th of an inch lol. and the little 8" section behind the notch has a 5* pitch upward.
and its still a foot deep bed in a mini truck so thats pretty good.

Pure_Hatred · 02-24-2009, 02:56 AM

man real good progress and the piks of it outside looks so sweet, im wanting a 1st gen project now..

95xtreme · 02-24-2009, 03:56 AM

Looks great. I need to go finish my girlfriends first gen. You are hauling ass on this thing.

layinlow88 · 02-24-2009, 04:17 AM

looking better man...keep up the good work...im ready to see this thing done

dava flav · 02-24-2009, 09:51 AM

thanks guys. hopfully i can finish the bed structure today.

METAL WORX · 02-27-2009, 08:38 AM

i think just about every body panel came off a diff color truck lol looking good tho man

JollyGreenMini · 02-27-2009, 11:58 PM

I love the old school billets man

dava flav · 03-01-2009, 12:11 PM

Quote: Originally Posted by METAL WORX

i think just about every body panel came off a diff color truck lol looking good tho man

yep.
thats how im building this truck. from scrap parts and craigslist. i started with just a frame and worked my way up. got a title with a cab and cliip fora 100 bucks. good dash. carb engine harness chassis harness. all interior.
i should have the title changed to used parts

throwinsparks89 · 03-01-2009, 07:09 PM

http://www.s10forum.com/forum/f178/t...12/index3.html

check out the last pics posted on page 3

bitchin sonoma · 03-01-2009, 10:21 PM

Awesome!!!

dava flav · 03-09-2009, 05:41 PM

doesnt look any different.
but i did get all the cab mounting and core support mounts done. used four link bar ends. 3" ones on the core support and back cab and 2" ones in the front cab area.
got the bed structure all done and leveled with the cab. jsut need to get some tubs and get those in then its ready for sheetmetal.
also picked up a late model vortec 4.3 motor for 250 bucks. the whole thing even the injection which i dont need. all teh brackets and acc. has a spun rod bearing on #2.
got a 2 piece shaft. just need the th350 so i can get this all mocked up.
also just got off the phone with matt at baja customs and ordered thier set of motormounts and plates fully unwelded so i can lower the motor accordingly

dava flav · 03-09-2009, 05:51 PM

heres a couple pics i just took. cuz i know peeps love pics

dava flav · 03-10-2009, 12:31 AM

picked up some tubs this afternoon. and got them in. good enough for a 27" tall tire with a little clearance.
so this bitch is ready for sheetmetal

SHROP · 03-10-2009, 01:04 AM

subscribes late lol... looking like an awesome build! good work

dava flav · 03-17-2009, 12:25 AM

ohh whats goin on here.
just waiting for my custom motor mounts. got the th350 hooked to the 98 4.3 vortec
then i get the motor and tranny in build my tranny crossmember. carrier bearing crossmember. yes im running a 2 piece shaft. so i can keep my bench seat with a stock floor body drop. its a ranger bench cut down 2 inches so thats why its a problem. the lower i can sit the better :crazy:

blazd88 · 03-17-2009, 02:37 PM

Im likin the bed! Now I gotta go work on mine. Great build man keep it up so I have some motivation.lol

dava flav · 03-17-2009, 03:48 PM

thanks
my motor mounts should be here tomm or thursday. i gotta side job to do sat but my main goals now are to get teh motor and tranny and d shaft all in and ready then finish plating frame and clean it all up.

dava flav · 03-20-2009, 01:07 AM

my motor mounts from bajacustoms that i bought unwelded so i could lower the motor a little.

dava flav · 03-20-2009, 09:01 PM

95xtreme · 03-22-2009, 12:00 AM

is it going to be carbed or injected?
Looks good though keep the progress coming

dava flav · 03-22-2009, 12:18 AM

carbed.
the cab and the whole truck harness came out of a 82 with a carbed 2.8 so its already setup ready to go. practically no wires at all.

throwinsparks89 · 03-22-2009, 04:49 AM

nice dirty ass sock foot in that pic dood haha, tranny X member looks good son

dava flav · 03-22-2009, 09:19 PM

takin the driveshaft in tomm to have it shortened.

dava flav · 03-23-2009, 12:06 AM

well got it all put back together and its looking like with a edelbrock intake and carb i will be able to clear a stock hood. :biggrin:
im gonna be loving that blazer bumper on there.

***fetuss10*** · 03-23-2009, 12:15 AM

good shit

littledevil4802 · 03-23-2009, 12:36 AM

things looking real good

silversdimeCT · 03-23-2009, 12:43 AM

well you convinced ne to do my first 1st gen. ive done 2 newer ones but i am makin the change this time. 1 question tho, even tho i cant belive how little youve spent on the build why didnt you fab up your own link kit? thats the only cost cutter i cant get past. other than that, thanks for doing good enough work for me to learn from. *subscribes

dava flav · 03-23-2009, 12:49 AM

this build has been a budget build i got that 6 link used for 450 shipped to my door. art arms for 300 all the bags for like 150 everything you see including motor and tranny valves gauges comp tanks and i still have less than 3 grand total int he truck complete im even talking about the actual cab and frame and shit and yes i have a title.
i was actally gonna ditch teh 6 link. i even bought a tri 4 link setup. but i had already welded all the mounts and gastank x member on and the rear frame already has bag ounts and tank mounts which would be in the way for a fuel cell so i said **** it.
i dont like the 6 link it pulls my wheels about 1 1/2 inches forward the last 3 inches of lift. but i never drive more than 2 inches off the ground anyway lol so i kept it to save time mainly. it was gonna tak a lot of time to take that kit off and put a new setup on.
the 450 dollars it cost to buy the 6 link is the same amount for a good bag on bar tri four link. actually more if you figure in the cost to run a fuel cell

silversdimeCT · 03-23-2009, 01:05 AM

gotcha, im jealous i may be a wop but im a jew at heart, im always trying to save a buck.... at any rate, i just cant get over how good a nice sfbd old school with a carbed 4.3 and a 5 speed would look so nice next to my tahoe. its inspiration everytime i open the thread man

dava flav · 03-23-2009, 01:10 AM

thanks bro

lade-lo · 03-24-2009, 11:32 AM

looks good man subscribes

bdydrp18 · 03-24-2009, 01:39 PM

coming along very nicely gives me something to show teh wife so i can talk her into building one

NorthwestS · 03-27-2009, 07:04 PM

This is coming along sweet. Keep trucking on it I want to see it rolling this summer.

dava flav · 03-28-2009, 12:14 PM

Quote: Originally Posted by NorthwestS

This is coming along sweet. Keep trucking on it I want to see it rolling this summer.

lol it wont be driving this summer no way i wish i could take it to the rock. hopefully yal will have the show next year to so i can make the cruise in it.
the plan is to finsh the body and rebuild the motor over the winter

dava flav · 04-05-2009, 05:45 PM

got the bed pieces all fitted today. the bottoms of front and back are all one piece even up the wall and around the square bars. caps on the ends as well to give it a more complete look and its nicer because i dont have to weld the edges down. ill take more pics when i start to weld it all in and itwill give you a better idea of what im saying.

01-28-2009, 09:27 PM	#102
throwinsparks89 Registered User Age: 24 Join Date: Jan 2007 Posts: 82 Location: Bothell Wa User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime why a new rear end? i noticed your CL add for the KP kit im broke but i wanna buy it haha
	[Reply w/Quote]

01-28-2009, 10:49 PM	#103
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime Quote: Originally Posted by throwinsparks89 why a new rear end? i noticed your CL add for the KP kit im broke but i wanna buy it haha why do you wanna buy it lol the rear end is a friends that im just using for mockup. i need to get one of my own soon too since im gonna be putting that trian. kit on. i just ordered my bars.
	[Reply w/Quote]

02-12-2009, 11:50 PM	#104
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime gangsta shit i cut the pinch off and threw some 17s i picked up for 300 with good tires. these will be the daily wheels. youll have to wait and see what wheels i will run for shows so scrapped my old bed because i didnt like how it turned out. picking up another bed and 91-93 core support and solid back window sat morning. and a smooth roll pan and grant kustoms skinned tailgate on sunday so ive got 600 into wheels and tires bed and coresupport and back window and roll pan and skinned gate i love craigslist
	[Reply w/Quote]

02-13-2009, 07:32 AM	#106
bdydrp18 Registered User Age: 31 Join Date: Aug 2007 Posts: 1,448 Location: corning, NY User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime yeah i would try for the fuel cell too. truck looking good by the way
	[Reply w/Quote]

02-13-2009, 09:36 AM	#107
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime umm thats the dash lol and yes there will be a fuell cell behind the axle
	[Reply w/Quote]

02-13-2009, 10:27 AM	#108
Golana Truck #121616 Age: 23 Join Date: Jan 2007 Posts: 2,800 Location: High River, Alberta User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime looking good so far man, i really like that you are doing this all for cheap! im on a budget build too, so seeing what you can do for so little $$$ is inspiring. one Q... im going to BD my 92 ext. cab as well (when i feel confident enough), and was wondering why you cut out a channel in the cab for the frame?
	[Reply w/Quote]

02-13-2009, 08:19 PM	#109
pearldrop Registered User Join Date: Jun 2007 Posts: 152 Location: Mount Vernon, WA User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime It looks good with the wheels. I will probably regret selling them once I start driving my truck and I have to keep it locked up so I can turn.
	[Reply w/Quote]

02-13-2009, 09:46 PM	#110
throwinsparks89 Registered User Age: 24 Join Date: Jan 2007 Posts: 82 Location: Bothell Wa User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime dood we should hang out, wanna go draggin? can i post pics of your girl? can you feed me? can i watch tv? wanna hold hands while we work on your truck???????? oh ya, truck looks ghettofab
	[Reply w/Quote]

02-13-2009, 10:20 PM	#111
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime you know thats gonna start some shit drew lol!!!! the holes in the floor are cus its a stock floor body drop and that part of the floor when you lay rocker, the frame is higher than the floor so the frame comes through the cab about 1/2 of an inch thanks again for the wheels chris.. my girl breanna didnt like em at first but when i put them on she said they look good. les shwab is crackin down so shawn said i have to pay but he only charged me for balancing lol Last edited by dava flav : 02-13-2009 at 10:23 PM.
	[Reply w/Quote]

02-15-2009, 12:36 AM	#112
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime
	[Reply w/Quote]

02-21-2009, 08:52 PM	#113
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime got the bed structure almost done. i just need to add more bracing to the floor area to strengthen it. the bedsides are all supported super strong. i hate flimsy bedsides.got the roll pan started. gotta take the skin off the old gate and put it on my gate and shave the slant box. i narrowed the front of the bed to match the back pillar cuz it slants in. its not the ideal way to do it but i just want the lines to match up. so yeah the truck is slightly narrower right there but it looks better imo. and a lot easier than pie cutting the pillar and pulling it out to match the bed lol. gonna start on the cab floor tomm. hopefully also picked up a 91-93 coresupport so i can run this badboy
	[Reply w/Quote]

02-22-2009, 08:21 PM	#114
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime just for referance the 4runner is not lifted and is sitting on 28" tires lol and my driveway is very slanted. nothing is bolted down onthe truck no bed bolts cab bolts or coresupport bolts
	[Reply w/Quote]

02-24-2009, 12:14 AM	#116
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime serioulsy thats all you have to say so the bed i think is gonna turn out pretty sweet. my goal is to get it as close to possible to thenotch. but the frames on these curve up towards the notch. so infront of the notch the last little section has a 10* pitch upwards mostly to clear the gas tank crossmember and it clears by a 1/16th of an inch lol. and the little 8" section behind the notch has a 5* pitch upward. and its still a foot deep bed in a mini truck so thats pretty good.
	[Reply w/Quote]

02-24-2009, 02:56 AM	#117
Pure_Hatred Petitioning Severed Texas Age: 24 Join Date: Sep 2008 Posts: 446 Location: Houston Texas User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime man real good progress and the piks of it outside looks so sweet, im wanting a 1st gen project now..
	[Reply w/Quote]

02-24-2009, 03:56 AM	#118
95xtreme Off Vanning. bbl Age: 23 Join Date: Oct 2005 Posts: 2,510 Location: Fargo don't ya know User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime Looks great. I need to go finish my girlfriends first gen. You are hauling ass on this thing.
	[Reply w/Quote]

02-24-2009, 04:17 AM	#119
layinlow88 Certified Auto HVAC Tech Age: 20 Join Date: Jun 2007 Posts: 7,473 Location: Camden, AR User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime looking better man...keep up the good work...im ready to see this thing done
	[Reply w/Quote]

02-24-2009, 09:51 AM	#120
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime thanks guys. hopfully i can finish the bed structure today.
	[Reply w/Quote]

02-27-2009, 08:38 AM	#121
METAL WORX Registered User Age: 28 Join Date: Nov 2008 Posts: 157 Location: Hope Mills NC User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime i think just about every body panel came off a diff color truck lol looking good tho man
	[Reply w/Quote]

02-27-2009, 11:58 PM	#122
JollyGreenMini Still 2 High Age: 24 Join Date: Oct 2001 Posts: 7,251 Location: Brockway, PA User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime I love the old school billets man
	[Reply w/Quote]

03-01-2009, 12:11 PM	#123
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime Quote: Originally Posted by METAL WORX i think just about every body panel came off a diff color truck lol looking good tho man yep. thats how im building this truck. from scrap parts and craigslist. i started with just a frame and worked my way up. got a title with a cab and cliip fora 100 bucks. good dash. carb engine harness chassis harness. all interior. i should have the title changed to used parts
	[Reply w/Quote]

03-01-2009, 07:09 PM	#124
throwinsparks89 Registered User Age: 24 Join Date: Jan 2007 Posts: 82 Location: Bothell Wa User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime http://www.s10forum.com/forum/f178/t...12/index3.html check out the last pics posted on page 3
	[Reply w/Quote]

03-01-2009, 10:21 PM	#125
bitchin sonoma he,he,he project over kil Age: 24 Join Date: Jul 2003 Posts: 1,543 Location: Benton harbor, Michigan User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime Awesome!!!
	[Reply w/Quote]

03-09-2009, 05:41 PM	#126
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime doesnt look any different. but i did get all the cab mounting and core support mounts done. used four link bar ends. 3" ones on the core support and back cab and 2" ones in the front cab area. got the bed structure all done and leveled with the cab. jsut need to get some tubs and get those in then its ready for sheetmetal. also picked up a late model vortec 4.3 motor for 250 bucks. the whole thing even the injection which i dont need. all teh brackets and acc. has a spun rod bearing on #2. got a 2 piece shaft. just need the th350 so i can get this all mocked up. also just got off the phone with matt at baja customs and ordered thier set of motormounts and plates fully unwelded so i can lower the motor accordingly
	[Reply w/Quote]

03-09-2009, 05:51 PM	#127
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime heres a couple pics i just took. cuz i know peeps love pics
	[Reply w/Quote]

03-10-2009, 12:31 AM	#128
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime picked up some tubs this afternoon. and got them in. good enough for a 27" tall tire with a little clearance. so this bitch is ready for sheetmetal
	[Reply w/Quote]

03-10-2009, 01:04 AM	#129
SHROP Back in CALI Age: 24 Join Date: Jun 2003 Posts: 5,916 Location: Hollister CA User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime subscribes late lol... looking like an awesome build! good work
	[Reply w/Quote]

03-17-2009, 12:25 AM	#130
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime ohh whats goin on here. just waiting for my custom motor mounts. got the th350 hooked to the 98 4.3 vortec then i get the motor and tranny in build my tranny crossmember. carrier bearing crossmember. yes im running a 2 piece shaft. so i can keep my bench seat with a stock floor body drop. its a ranger bench cut down 2 inches so thats why its a problem. the lower i can sit the better :crazy:
	[Reply w/Quote]

03-17-2009, 02:37 PM	#131
blazd88 Registered User Age: 30 Join Date: Oct 2007 Posts: 78 Location: Lubbock Tx. User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime Im likin the bed! Now I gotta go work on mine. Great build man keep it up so I have some motivation.lol
	[Reply w/Quote]

03-17-2009, 03:48 PM	#132
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime thanks my motor mounts should be here tomm or thursday. i gotta side job to do sat but my main goals now are to get teh motor and tranny and d shaft all in and ready then finish plating frame and clean it all up.
	[Reply w/Quote]

03-20-2009, 01:07 AM	#133
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime my motor mounts from bajacustoms that i bought unwelded so i could lower the motor a little.
	[Reply w/Quote]

03-20-2009, 09:01 PM	#134
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime
	[Reply w/Quote]

03-22-2009, 12:00 AM	#135
95xtreme Off Vanning. bbl Age: 23 Join Date: Oct 2005 Posts: 2,510 Location: Fargo don't ya know User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime is it going to be carbed or injected? Looks good though keep the progress coming
	[Reply w/Quote]

03-22-2009, 12:18 AM	#136
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime carbed. the cab and the whole truck harness came out of a 82 with a carbed 2.8 so its already setup ready to go. practically no wires at all.
	[Reply w/Quote]

03-22-2009, 04:49 AM	#137
throwinsparks89 Registered User Age: 24 Join Date: Jan 2007 Posts: 82 Location: Bothell Wa User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime nice dirty ass sock foot in that pic dood haha, tranny X member looks good son
	[Reply w/Quote]

03-22-2009, 09:19 PM	#138
dava flav Registered User Age: 28 Join Date: Jan 2008 Posts: 728 Location: User is: OffLine	Re: building a sfbd rolling chassis for the girls 1st gen dime takin the driveshaft in tomm to have it shortened.
	[Reply w/Quote]