Body droppin 2 dimes at the same time

laydout98 · 10-11-2007, 12:07 AM

Quote: Originally Posted by scrubz739

looks good man. I'll keep an eye out for you @ the next TN show I'm in, prolly LOATP. and my buddy just shelled out some serious $$$ for his 18" Budniks, you seriously got a deal from when we talked at STS

apprecaite it man..yea i was a LOATP (man if that wasnt cold haha)this year my truck was rite beside his but i didnt get to make it down to STS unforuntaly....I heard that they canceld this year cumin up i hope not tho but yea RJ got a sweet deal on those budniks he got an 18/20 combo

rjs04 · 10-11-2007, 12:39 AM

Quote: Originally Posted by laydout98

apprecaite it man..yea i was a LOATP (man if that wasnt cold haha)this year my truck was rite beside his but i didnt get to make it down to STS unforuntaly....I heard that they canceld this year cumin up i hope not tho but yea RJ got a sweet deal on those budniks he got an 18/20 combo

Yea i heard they cancelled layd out for this year too, I'm glad to see you got the back wall almost done man, looks good u must have caught on quick. I will be back over tomorrow and maybe we will finish the pass. side and the drivers side as well.

scrubz · 10-11-2007, 08:24 PM

nah, pretty sure it's still goin on. I know there was a rumor about it bein the last year, but as far as I know jeff decided to keep it up. at least one more year

laydout98 · 10-11-2007, 10:59 PM

well we made a little more progress...when u have one person weldin fillers just as fast as the other can make em ur doin pretty good i think haha.... we filled almost the entire floor board in just a couple hours today here are sum pics

2ToneS10 · 10-12-2007, 01:50 PM

very nice bros lol

rjs04 · 10-12-2007, 04:27 PM

Quote: Originally Posted by 2ToneS10

very nice bros lol

Thanks man, Does anyone have a diagram or can tell me what lines go where on a hydroboost? I am probably going to get one for my truck because I like how much cleaner they look than a vaccum booster. I have searched and read up on them a little but I cant find exactly what goes where.

rjs04 · 10-14-2007, 01:05 AM

We got a lot done today, one of our friends from the club we are in came down today to see what was going on with the trucks and helped us all day. We got the firewall welded up, the frame horns cut, dropped, and rewelded, we cut the fenders and put them and core support on to test fit everything and the fenders line up better now then they did before the bodydrop. We also cut a huge hole in the stock hood for now, he is either going to get a cowl hood or we are gonna do some kinda hood scoop, he was thinking about a cavi intake swap but he doesnt have tubular control arms so thats gonnna have to wait. Tomorrow we are going to get the radiator leaned back, put the firewall tubs in, hopefully get the pedals cut, bent and put back in, and maybe get the master cylinder leaned back and start on some wiring. We didnt get any pics today except 1 I took on my phone with the fenders on, but hopefully we will have some tomorrow of all the progress.

laydout98 · 10-14-2007, 11:47 PM

we have made sum good progress in my opoinon these last two days but here are sum pics of frame horns and my clutch angled and recessed

laydout98 · 10-14-2007, 11:49 PM

here is the pic of clutch sry lol....

laydout98 · 10-14-2007, 11:53 PM

here are sum pics of firewall and pics of the tubs i still have like 3 or 4 finish and finish weldn like 1 spot on the tub its self

laydout98 · 10-14-2007, 11:56 PM

here is a Brain Fart i guess you could say it was a spare of the moment idea haha this pic is of my hood with a big ass whole haha....i may get a cowl dont the road are bubble this not sure...i looked in to a cavi intake and i need to sum tube uppers first so i decide that would have to wait

Draggin97 · 10-15-2007, 12:34 AM

nice progress, does your radiator hit the frame horns since they are straight up and down? I learned that one the hard way, why not mod your motor parts to accept the stock hood? You guys are making some great progress keep it up.

rjs04 · 10-15-2007, 12:47 AM

Quote: Originally Posted by Draggin97

nice progress, does your radiator hit the frame horns since they are straight up and down? I learned that one the hard way, why not mod your motor parts to accept the stock hood? You guys are making some great progress keep it up.

Thanks man, we leaned the radiator in at the bottom to clear the frame horns and got a longer lower radiator hose to reach. We had some pics of the truck layd out showing the clearance we got from the tubs and by leanin the clutch master cylinder in but i guess he decided not to post em up. Now all we have to do to have the cab finished is finish puttin the 3 or so fillers we lack, clean up the welds on the firewall, weld up the heater holes, run wiring, seam seal and undercoat everything, and put it back together unless I just left something out. I have to work like 5 days this week on top of going to school full time so i probably wont go out to work but maybe 1 day this week, patrick said he was going to try to get everything close to being done so we can hopefully cut into my cab next week.

laydout98 · 10-15-2007, 11:00 AM

Quote: Originally Posted by rjs04

Thanks man, we leaned the radiator in at the bottom to clear the frame horns and got a longer lower radiator hose to reach. We had some pics of the truck layd out showing the clearance we got from the tubs and by leanin the clutch master cylinder in but i guess he decided not to post em up. Now all we have to do to have the cab finished is finish puttin the 3 or so fillers we lack, clean up the welds on the firewall, weld up the heater holes, run wiring, seam seal and undercoat everything, and put it back together unless I just left something out. I have to work like 5 days this week on top of going to school full time so i probably wont go out to work but maybe 1 day this week, patrick said he was going to try to get everything close to being done so we can hopefully cut into my cab next week.

no man my attachment quota has been filled thats the reason why the pic with the hole in the hood is not up also..... i gotta figure out sum other way to attach pics.

laydout98 · 10-15-2007, 11:02 AM

Quote: Originally Posted by Draggin97

nice progress, does your radiator hit the frame horns since they are straight up and down? I learned that one the hard way, why not mod your motor parts to accept the stock hood? You guys are making some great progress keep it up.

Thanks man i appreciate it.... I Looked in to Gettin A cavi intake but u have to modfiy ur uppers so much it kinda looks dangerous or get uppers and a couple other smaller things so i figured that would have to wait i can get another stock hood farley easy so if i decide to do that i have quick access to one....

laydout98 · 10-15-2007, 11:24 PM

well did a couple little things today i guess you could say... i finished weldin in that one tub.. finished weldin in the fillers around it...welded a filler were the heater hampster cage used to be...put in a overflow antifreeze tank and i extended one wiring harness but ran out of little splice connector things so i will do the other tomar and hopfully fill the other 2 holes.... we post pics tomar when i make more progress

rjs04 · 10-16-2007, 12:15 AM

Quote: Originally Posted by laydout98

well did a couple little things today i guess you could say... i finished weldin in that one tub.. finished weldin in the fillers around it...welded a filler were the heater hampster cage used to be...put in a overflow antifreeze tank and i extended one wiring harness but ran out of little splice connector things so i will do the other tomar and hopfully fill the other 2 holes.... we post pics tomar when i make more progress

Sounds like u got quite a bit done today man, I have to work the rest of the week so I prob wont get to come out and work again until sometime next week.

laydout98 · 10-16-2007, 10:52 AM

Quote: Originally Posted by rjs04

Sounds like u got quite a bit done today man, I have to work the rest of the week so I prob wont get to come out and work again until sometime next week.

That alright man all is left to do is just really Time Consuming small stuff.. you never no i mite have this damn thing able to start up by next week LMAO!!!!!!!!!!!!

laydout98 · 10-17-2007, 11:15 PM

http://<a href=

2ToneS10 · 10-18-2007, 12:59 PM

link doesnt work....if thats even a link? lol

TuckaBlaze · 10-18-2007, 01:22 PM

sweet man!

laydout98 · 10-18-2007, 05:43 PM

Quote: Originally Posted by 2ToneS10

link doesnt work....if thats even a link? lol

no i was tryin to figure out how to work photo bucket and messed up haha sorry about that

laydout98 · 10-18-2007, 05:44 PM

Quote: Originally Posted by TuckaBlaze

sweet man!

thanx man i appreciate it

TuckaBlaze · 10-18-2007, 07:17 PM

Makes me wanna trad. this...

laydout98 · 10-18-2007, 11:26 PM

laydout98 · 10-18-2007, 11:27 PM

dash kinda in an wireing almost done

laydout98 · 10-18-2007, 11:27 PM

b4 dash was in

laydout98 · 10-18-2007, 11:28 PM

clutch recessed and tub(showing clearance)

Draggin97 · 10-19-2007, 12:15 AM

looking good, did you put the computer behind the dash?

laydout98 · 10-19-2007, 12:40 AM

Quote: Originally Posted by Draggin97

looking good, did you put the computer behind the dash?

yea i bolted it in rite wre the heater cage used to be in is a really good fit lol

10-11-2007, 12:07 AM	#51
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time Quote: Originally Posted by scrubz739 looks good man. I'll keep an eye out for you @ the next TN show I'm in, prolly LOATP. and my buddy just shelled out some serious $$$ for his 18" Budniks, you seriously got a deal from when we talked at STS apprecaite it man..yea i was a LOATP (man if that wasnt cold haha)this year my truck was rite beside his but i didnt get to make it down to STS unforuntaly....I heard that they canceld this year cumin up i hope not tho but yea RJ got a sweet deal on those budniks he got an 18/20 combo
	[Reply w/Quote]

10-11-2007, 12:39 AM	#52
rjs04 Layin Body Age: 22 Join Date: Jan 2003 Posts: 623 Location: Richlands VA; Bristol TN User is: OffLine	Re: Body droppin 2 dimes at the same time Quote: Originally Posted by laydout98 apprecaite it man..yea i was a LOATP (man if that wasnt cold haha)this year my truck was rite beside his but i didnt get to make it down to STS unforuntaly....I heard that they canceld this year cumin up i hope not tho but yea RJ got a sweet deal on those budniks he got an 18/20 combo Yea i heard they cancelled layd out for this year too, I'm glad to see you got the back wall almost done man, looks good u must have caught on quick. I will be back over tomorrow and maybe we will finish the pass. side and the drivers side as well.
	[Reply w/Quote]

10-11-2007, 08:24 PM	#53
scrubz 355 member Age: 23 Join Date: Oct 2004 Posts: 11,763 Location: Charlotte, NC User is: OffLine	Re: Body droppin 2 dimes at the same time nah, pretty sure it's still goin on. I know there was a rumor about it bein the last year, but as far as I know jeff decided to keep it up. at least one more year
	[Reply w/Quote]

10-12-2007, 01:50 PM	#55
2ToneS10 Registered User Age: 21 Join Date: Jul 2004 Posts: 1,426 Location: NJ User is: OffLine	Re: Body droppin 2 dimes at the same time very nice bros lol
	[Reply w/Quote]

10-12-2007, 04:27 PM	#56
rjs04 Layin Body Age: 22 Join Date: Jan 2003 Posts: 623 Location: Richlands VA; Bristol TN User is: OffLine	Re: Body droppin 2 dimes at the same time Quote: Originally Posted by 2ToneS10 very nice bros lol Thanks man, Does anyone have a diagram or can tell me what lines go where on a hydroboost? I am probably going to get one for my truck because I like how much cleaner they look than a vaccum booster. I have searched and read up on them a little but I cant find exactly what goes where.
	[Reply w/Quote]


S10Forum is the premier S-Series Site on the internet. Registered Users do not see the above ads. Please Register - It's Free!

10-14-2007, 11:56 PM	#61
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time here is a Brain Fart i guess you could say it was a spare of the moment idea haha this pic is of my hood with a big ass whole haha....i may get a cowl dont the road are bubble this not sure...i looked in to a cavi intake and i need to sum tube uppers first so i decide that would have to wait
	[Reply w/Quote]

10-15-2007, 12:34 AM	#62
Draggin97 progress is slow for now Age: 25 Join Date: Aug 2005 Posts: 2,642 Location: lawrence kansas User is: OffLine	Re: Body droppin 2 dimes at the same time nice progress, does your radiator hit the frame horns since they are straight up and down? I learned that one the hard way, why not mod your motor parts to accept the stock hood? You guys are making some great progress keep it up.
	[Reply w/Quote]

10-15-2007, 12:47 AM	#63
rjs04 Layin Body Age: 22 Join Date: Jan 2003 Posts: 623 Location: Richlands VA; Bristol TN User is: OffLine	Re: Body droppin 2 dimes at the same time Quote: Originally Posted by Draggin97 nice progress, does your radiator hit the frame horns since they are straight up and down? I learned that one the hard way, why not mod your motor parts to accept the stock hood? You guys are making some great progress keep it up. Thanks man, we leaned the radiator in at the bottom to clear the frame horns and got a longer lower radiator hose to reach. We had some pics of the truck layd out showing the clearance we got from the tubs and by leanin the clutch master cylinder in but i guess he decided not to post em up. Now all we have to do to have the cab finished is finish puttin the 3 or so fillers we lack, clean up the welds on the firewall, weld up the heater holes, run wiring, seam seal and undercoat everything, and put it back together unless I just left something out. I have to work like 5 days this week on top of going to school full time so i probably wont go out to work but maybe 1 day this week, patrick said he was going to try to get everything close to being done so we can hopefully cut into my cab next week.
	[Reply w/Quote]

10-15-2007, 11:00 AM	#64
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time Quote: Originally Posted by rjs04 Thanks man, we leaned the radiator in at the bottom to clear the frame horns and got a longer lower radiator hose to reach. We had some pics of the truck layd out showing the clearance we got from the tubs and by leanin the clutch master cylinder in but i guess he decided not to post em up. Now all we have to do to have the cab finished is finish puttin the 3 or so fillers we lack, clean up the welds on the firewall, weld up the heater holes, run wiring, seam seal and undercoat everything, and put it back together unless I just left something out. I have to work like 5 days this week on top of going to school full time so i probably wont go out to work but maybe 1 day this week, patrick said he was going to try to get everything close to being done so we can hopefully cut into my cab next week. no man my attachment quota has been filled thats the reason why the pic with the hole in the hood is not up also..... i gotta figure out sum other way to attach pics.
	[Reply w/Quote]

10-15-2007, 11:02 AM	#65
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time Quote: Originally Posted by Draggin97 nice progress, does your radiator hit the frame horns since they are straight up and down? I learned that one the hard way, why not mod your motor parts to accept the stock hood? You guys are making some great progress keep it up. Thanks man i appreciate it.... I Looked in to Gettin A cavi intake but u have to modfiy ur uppers so much it kinda looks dangerous or get uppers and a couple other smaller things so i figured that would have to wait i can get another stock hood farley easy so if i decide to do that i have quick access to one....
	[Reply w/Quote]

10-15-2007, 11:24 PM	#66
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time well did a couple little things today i guess you could say... i finished weldin in that one tub.. finished weldin in the fillers around it...welded a filler were the heater hampster cage used to be...put in a overflow antifreeze tank and i extended one wiring harness but ran out of little splice connector things so i will do the other tomar and hopfully fill the other 2 holes.... we post pics tomar when i make more progress
	[Reply w/Quote]

10-16-2007, 12:15 AM	#67
rjs04 Layin Body Age: 22 Join Date: Jan 2003 Posts: 623 Location: Richlands VA; Bristol TN User is: OffLine	Re: Body droppin 2 dimes at the same time Quote: Originally Posted by laydout98 well did a couple little things today i guess you could say... i finished weldin in that one tub.. finished weldin in the fillers around it...welded a filler were the heater hampster cage used to be...put in a overflow antifreeze tank and i extended one wiring harness but ran out of little splice connector things so i will do the other tomar and hopfully fill the other 2 holes.... we post pics tomar when i make more progress Sounds like u got quite a bit done today man, I have to work the rest of the week so I prob wont get to come out and work again until sometime next week.
	[Reply w/Quote]

10-16-2007, 10:52 AM	#68
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time Quote: Originally Posted by rjs04 Sounds like u got quite a bit done today man, I have to work the rest of the week so I prob wont get to come out and work again until sometime next week. That alright man all is left to do is just really Time Consuming small stuff.. you never no i mite have this damn thing able to start up by next week LMAO!!!!!!!!!!!!
	[Reply w/Quote]

10-17-2007, 11:15 PM	#69
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time http://<a href=
	[Reply w/Quote]

10-18-2007, 12:59 PM	#70
2ToneS10 Registered User Age: 21 Join Date: Jul 2004 Posts: 1,426 Location: NJ User is: OffLine	Re: Body droppin 2 dimes at the same time link doesnt work....if thats even a link? lol
	[Reply w/Quote]

10-18-2007, 01:22 PM	#71
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,268 Location: Leesville, LA User is: OffLine	Re: Body droppin 2 dimes at the same time sweet man!
	[Reply w/Quote]

10-18-2007, 05:43 PM	#72
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time Quote: Originally Posted by 2ToneS10 link doesnt work....if thats even a link? lol no i was tryin to figure out how to work photo bucket and messed up haha sorry about that
	[Reply w/Quote]

10-18-2007, 05:44 PM	#73
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time Quote: Originally Posted by TuckaBlaze sweet man! thanx man i appreciate it
	[Reply w/Quote]

10-18-2007, 07:17 PM	#74
TuckaBlaze Human Element Age: 23 Join Date: Jan 2005 Posts: 7,268 Location: Leesville, LA User is: OffLine	Re: Body droppin 2 dimes at the same time Makes me wanna trad. this...
	[Reply w/Quote]

10-18-2007, 11:26 PM	#75
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time
	[Reply w/Quote]

10-18-2007, 11:27 PM	#76
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time dash kinda in an wireing almost done
	[Reply w/Quote]

10-18-2007, 11:28 PM	#78
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time clutch recessed and tub(showing clearance)
	[Reply w/Quote]

10-19-2007, 12:15 AM	#79
Draggin97 progress is slow for now Age: 25 Join Date: Aug 2005 Posts: 2,642 Location: lawrence kansas User is: OffLine	Re: Body droppin 2 dimes at the same time looking good, did you put the computer behind the dash?
	[Reply w/Quote]

10-19-2007, 12:40 AM	#80
laydout98 NUMATIK. Age: 19 Join Date: Jul 2007 Posts: 249 Location: Grundy VA User is: OffLine	Re: Body droppin 2 dimes at the same time Quote: Originally Posted by Draggin97 looking good, did you put the computer behind the dash? yea i bolted it in rite wre the heater cage used to be in is a really good fit lol
	[Reply w/Quote]