Agrid's Bodydrop

duck_tape187 · 05-15-2009, 01:38 PM

well thanks man ill keep that in mind. im still working on my suspension gotta put a new link setup in the back went with a ART 3 link and i dont like it going to go with a SD 5 link wanna be laying frame before i start my bodydrop

layinlow_agrid · 05-16-2009, 10:12 PM

Quote: Originally Posted by duck_tape187

well thanks man ill keep that in mind. im still working on my suspension gotta put a new link setup in the back went with a ART 3 link and i dont like it going to go with a SD 5 link wanna be laying frame before i start my bodydrop

the art didn't allow you to lay frame? what are you going to do with the art 3 link?

duck_tape187 · 05-18-2009, 09:21 AM

dont know was trying to post it on the classifieds here but either im not doing something right or the classified section is screwed up

im not sure if it will lay out or not i think that i will im not notched yet i just dont like the sleeve bag setup that SD 5 link is way more badass with the bags on the bars

duck_tape187 · 05-18-2009, 09:49 AM

if your intrested let me know

layinlow_agrid · 05-18-2009, 12:15 PM

Quote: Originally Posted by duck_tape187

if your intrested let me know

yes, i might be interested. it looks kind old though. anyways here is my number give me a call or send me your number and ill call you and we'll talk. (989)621-7739

layinlow_agrid · 05-18-2009, 12:23 PM

Quote: Originally Posted by duck_tape187

dont know was trying to post it on the classifieds here but either im not doing something right or the classified section is screwed up

im not sure if it will lay out or not i think that i will im not notched yet i just dont like the sleeve bag setup that SD 5 link is way more badass with the bags on the bars

where are you from? i make notches too. and ill hook ya up real cheap. and they only take a few hours to install. i can them better and any size you need to layout on up to 24's. if you are running 20's you will only need a 8 inch notch if you are running 22's you will need a 10 inch notch and if you are going with 24's you will need a 12 inch notch. 8 inch is $75 for the notch $100 for the 10inch and $125 for the 12 inch. all 10gage cold rolled stell laser cut to match the curves of your frame. let me know if you would be interested in maybe a trade of some sort or what ever.

duck_tape187 · 05-18-2009, 02:34 PM

i might take you up on those notches.

that 3 link is about 2 1/2 years old only drove on it for about 6 months and since then its been sitting in garage the motor went out on my truck and i kinda got side tracked with my ol' lady having a baby and just in the last couple of months kinda got the free time (getting laid off) to work on my truck again if your intrested shoot me an offer and maybe we could work something out

layinlow_agrid · 05-18-2009, 02:44 PM

Quote: Originally Posted by duck_tape187

i might take you up on those notches.

that 3 link is about 2 1/2 years old only drove on it for about 6 months and since then its been sitting in garage the motor went out on my truck and i kinda got side tracked with my ol' lady having a baby and just in the last couple of months kinda got the free time (getting laid off) to work on my truck again if your intrested shoot me an offer and maybe we could work something out

I don't know man, i don't even know what they go for new. and to honest with you i build my own link systems. i know you can buld them way cheaper then you can buy them for. but i'd be willing to give you $200 plus a notch kit. but, to be honest with you. you could probably find someone on here that rally needs it and could give you more for it. just have the pics and stuff up on here right now might even help you sell it. alot of people look through these forums and you never know, you might get a response on it. but you deside what you wanna do.

duck_tape187 · 05-18-2009, 06:42 PM

http://www.suicidedoors.com/4-link-k...es-s10-air-bar

SD sells them for $1200 new and its a good setup. at the time i didnt have a welder and i thought that a bolt on kit would be the way to go.the it rides really good but looking back on it i should have went with the 5 link kit fron SD i was thinking like $400 plus shipping for all of it if your not intrested i might try to sell it elsewhere but ill give you first dibs since you asked about it as for the notches if i do order that 5 link kit it comes with notches so i guess ill let you know when i figure something out.

are yours 8 pcs like the SD one? if so i might just get them from you because all im looking to do is a bodydrop on 20's so an 8in is plenty for me

also i have a pair of big red ART valves that i dont want anymore also 2 1/2 years old with about 6 months of use

i guess let me know

layinlow_agrid · 05-18-2009, 09:29 PM

Quote: Originally Posted by duck_tape187

http://www.suicidedoors.com/4-link-k...es-s10-air-bar

SD sells them for $1200 new and its a good setup. at the time i didnt have a welder and i thought that a bolt on kit would be the way to go.the it rides really good but looking back on it i should have went with the 5 link kit fron SD i was thinking like $400 plus shipping for all of it if your not intrested i might try to sell it elsewhere but ill give you first dibs since you asked about it as for the notches if i do order that 5 link kit it comes with notches so i guess ill let you know when i figure something out.

are yours 8 pcs like the SD one? if so i might just get them from you because all im looking to do is a bodydrop on 20's so an 8in is plenty for me

also i have a pair of big red ART valves that i dont want anymore also 2 1/2 years old with about 6 months of use

i guess let me know

i do agree with you that sd kits are by far better than art. but you gotta think that all you have is a 3 link. and you can get a sd kit 3-link for 500.00. so 400.00 is kinda high on a used art 3 link. so i will probably pass on that. and as for the valves i have valves already so no use for them sorry. and yes the 8 peice notch kits that you can buy from sd are basically the same thing i make. but there dimentions might be different then what i make but they are all the same aspect. mine are a little thicker than most but i feel that is safer. i build all my own link kits, and all my own cross bars everything done to the truck i make with an exception of the bags and valves lines ect... i feel safer that way knowing that the quality of the product is to my standards. anyways i wish you luck on the sale of your link kit, and i hope you get what you are asking for. have a good one.

layinlow_agrid · 05-18-2009, 09:51 PM

good news guys ill have that camera tomorrow, so expect those pics then.

duck_tape187 · 05-18-2009, 11:53 PM

thanks

layinlow_agrid · 05-21-2009, 04:32 PM

ok here are the long awaited pics. i am buying myself a new digital cam today also. so no more waiting on people to come out and take them for me.

the cab is now back on and the passenger side fillers are all in and the drivers side is almost done too. the the back will get done shouldnt take but a few hours. then i can get started on the firewall and the tubs. will have more pics soon.

layinlow_agrid · 05-26-2009, 12:44 PM

here is what i got done the other day. and i have been working on it a little bit more here and there. i now have both sides done and firewall done too, ill get a camera and take more pics in a few days and get them up here and posted.

layinlow_agrid · 06-01-2009, 12:55 PM

ok here is the welder that i used for the most of this project.

here are some pics that were taken with me in them.

and here are some pics of the truck. all fillers tact in place and ready to be welded in fully. i have started on that already and should have some pics of that up soon too.

oh and i finally got my tracking number on those tires i bought, and they will be here on thursday so i can get some pics of those mounted on the truck too. then i can get started on my firewall tubs.

Oldskool94 · 06-01-2009, 02:40 PM

looks great man are you going to oaktown?

layinlow_agrid · 06-01-2009, 03:58 PM

Quote: Originally Posted by STL_DRGN

looks great man are you going to oaktown?

hey whats up bro? nice to see a fellow mini trucker in michigan. i havent seen very many of us around. anyways what is oaktown and where is it? fill me in. I wanna know. talk to ya later bro.

Oldskool94 · 06-01-2009, 04:28 PM

Quote: Originally Posted by layinlow_agrid

hey whats up bro? nice to see a fellow mini trucker in michigan. i havent seen very many of us around. anyways what is oaktown and where is it? fill me in. I wanna know. talk to ya later bro.

not to much ive been following this awhile its a good build. but oaktown is in mount clemings michigan june 20th its pretty much the biggest truck show in michigan.

heres a link for some info.

http://oaktowntrucks.com/ then click on the car show tab and theres all the information.

layinlow_agrid · 06-01-2009, 10:55 PM

Quote: Originally Posted by STL_DRGN

not to much ive been following this awhile its a good build. but oaktown is in mount clemings michigan june 20th its pretty much the biggest truck show in michigan.

heres a link for some info.

http://oaktowntrucks.com/ then click on the car show tab and theres all the information.

shit, i wish my ride would be done by then. i probably wont make it this year, but next year is deff. a possibility. i have so much work ahead of me still. but, shit man maybe we could get together some time. i know of a lot of events we could get in on. and i could always use a hand with my dime.

anyways i just finished up my welds on the cab and took the bars off and tryed to lay her out. but, my control arms are stock and thats going to hold me up. im going to order the uppers here in a week or two then in a few more weeks ill get the lowers. and then start on my six link. im done with the drop after i get my tubs done. at least until i can get her layin down anyways. then i will continue on it some more.

CatDaddy52 · 06-01-2009, 11:03 PM

Drive your daily to the Oaktown show.....you can meet some of the MI crew & get some good ideas for your whip!!

layinlow_agrid · 06-02-2009, 10:49 AM

Quote: Originally Posted by CatDaddy52

Drive your daily to the Oaktown show.....you can meet some of the MI crew & get some good ideas for your whip!!

yeah i could do that. possibly, my work schedual is so ****ed up though. so, i guess thats a maybe. hope to see you all there. keep your eyes peeled for me. later, and thanks for the invite.

layinlow_agrid · 06-08-2009, 02:17 PM

here are some new pics and updates.

tub cuts for the drivers side.

this is my tire size that i went with.

and this what i selected for my tubs. it is enough to get both sides done it was 34.00 at the local tractor supply.

CRX304 · 06-14-2009, 12:41 PM

You make me wanna cut my truck up.... Looks REAL good tho

layinlow_agrid · 06-14-2009, 01:13 PM

Quote: Originally Posted by CRX304

You make me wanna cut my truck up.... Looks REAL good tho

well ithica is only about 25 30 mins from where im at. if you feel up to it then do it! ill give you a hand with the project. if it don't scrape your too high. drop that shit! in fact, i picked up the cab and the box that im using for this project from m-46 auto right there in riverdale.

layinlow_agrid · 06-17-2009, 11:30 PM

as i said previously in this thread that my camera was messed up. these are what the pics turn out like on the camera. shitty! never the less. here they are

here are some updated pics. im going to hold off on welding the tubs in for a week or so, and get a start on the box drop and dropping the front horns. but it is cut out and i have the tubs for 22" wheels. i am running 20's but i figured some day i may want to go bigger, so i left the option open and tubed for 22's. anyways here they are.............

let me know what you think.

layinlow_agrid · 06-27-2009, 11:40 AM

any one know of a thread on here that has a box drop walk threw? i started on my box drop just going along with it though. would like to check out some others to see if im going about this the right way or not. let me know thank you.

Kneegra · 07-09-2009, 12:04 PM

looks good man, any updates?

layinlow_agrid · 07-10-2009, 12:23 AM

Quote: Originally Posted by Kneegra

looks good man, any updates?

yeah i have to get pics of it. but really havent had alot of time to work on it lately. ive been working alot and havent had much free time.

layinlow_agrid · 07-14-2009, 06:47 PM

ok here is a little update. bar welded in on horns and marks layed out. im going to cut these within the next couple of days and get them lined up and welded in. then get my core support in place and get the fenders back on. then move on to the box drop, and my custom made by me rear 6-link. anyways here they are.

Kneegra · 07-14-2009, 07:52 PM

hell yea man looks good

layinlow_agrid · 07-14-2009, 11:20 PM

Quote: Originally Posted by Kneegra

hell yea man looks good

thanks a lot man, check back in a few days to see the updates on it. i should have time over the next few days and this weekend to work on it a lil bit here and there. have a good one.

Kneegra · 08-16-2009, 10:30 PM

any new progress?

n0sh0b0i · 08-17-2009, 12:34 AM

Maybe he's got lazy like I did... After I set my truck down I got really lazy... I haven't touched the truck for almost a month already and I still have to make my lift bars and sheetmeral my bed

layinlow_agrid · 08-18-2009, 04:55 PM

Quote: Originally Posted by n0sh0b0i

Maybe he's got lazy like I did... After I set my truck down I got really lazy... I haven't touched the truck for almost a month already and I still have to make my lift bars and sheetmeral my bed

naw man, just got alot of shit going on. moving to a new shop and just life in general. ill have some updates in a few weeks for you guys.

layinlow_agrid · 09-04-2009, 11:50 AM

ok new update. not anything more done to the truck but the move is almost complete now. have everything at the new shop now with an exception of about two or three more loads of tools and odds and ends. so ill get cracking on the truck again soon. probably mid to end week.

firstgenon24s · 09-04-2009, 12:39 PM

I love the angled look instead of the boxed look,and I know it helps for carpet fitment too.

layinlow_agrid · 09-04-2009, 12:52 PM

Quote: Originally Posted by firstgenon24s

I love the angled look instead of the boxed look,and I know it helps for carpet fitment too.

yeah it does help alot. but, im not going with the stock carpet anyways. my boy works at an upholstery place and he is going to custom make the entire carpet out of baby blue material. anyways the angle job is the best way to go if you plan to use your stock carpet and have little revamping to do. otherwise you have to hack you carpet all up to get it to fit properly.

firstgenon24s · 09-04-2009, 03:14 PM

Yeah,thats what I'll be doing but its all good.

layinlow_agrid · 09-04-2009, 03:23 PM

Quote: Originally Posted by firstgenon24s

Yeah,thats what I'll be doing but its all good.

have you done your body drop yet? if not do you plan to stock floor it or traditional?

1sikPuP · 09-05-2009, 07:11 PM

damn man looks good! everythings looks to be workin out for ya!

for the bed, one of the recent mini truckin mags had a way to do the bed bd.

layinlow_agrid · 09-06-2009, 05:19 PM

Quote: Originally Posted by zms2004

damn man looks good! everythings looks to be workin out for ya!

for the bed, one of the recent mini truckin mags had a way to do the bed bd.

yeah i know i read it like 7 or 8 times. but im going with a custom sheetmetal inside so im just going to drop it when i make the frame. and thanks, everything is working out for me really well so far. now lets just hope that it continues to work out this good for the rest of the project.

mr. steve · 09-06-2009, 06:00 PM

did you move the cab back at all?

LayinRockR93 · 09-07-2009, 02:22 PM

Wat gauge sheetmetal did u use for ur filler plates?

layinlow_agrid · 09-08-2009, 12:19 AM

Quote: Originally Posted by mr. steve

did you move the cab back at all?

no i did not. i just dropped it and made sure it was square and lined up with the rear wall.

layinlow_agrid · 09-08-2009, 12:20 AM

Quote: Originally Posted by LayinRockR93

Wat gauge sheetmetal did u use for ur filler plates?

14 gauge!

djleighk15 · 10-08-2009, 01:55 AM

any new updates on this?

layinlow_agrid · 10-08-2009, 04:00 AM

Quote: Originally Posted by djleighk15

any new updates on this?

yeah sorry guys havent had much timee to get online to post anything but tomorrow ill make sure to set some time aside to update this thread. see ay then.

firstgenon24s · 10-08-2009, 02:23 PM

Quote: Originally Posted by layinlow_agrid

have you done your body drop yet? if not do you plan to stock floor it or traditional?

Its a 3 Inch Traditional and its not angled just like yours,Its a 97 blazer.

mylostsoul · 10-08-2009, 03:10 PM

Quote: Originally Posted by zms2004

damn man looks good! everythings looks to be workin out for ya!
for the bed, one of the recent mini truckin mags had a way to do the bed bd.

Would they have that on their site? I need to find that mag...

Keep up the good work on this truck dude ... I am getting a edgy because I get my truck next month but cant start on it until we move in march

but oh well ... i get to spend my 2nd job money on it and have it done in a lil over a year!!! Keep it up man!

layinlow_agrid · 10-08-2009, 06:35 PM

Quote: Originally Posted by firstgenon24s

Its a 3 Inch Traditional and its not angled just like yours,Its a 97 blazer.

mine is angled just look at the pics.

05-15-2009, 01:38 PM	#51
duck_tape187 88 that needs a bodydrop Age: 23 Join Date: Mar 2009 Posts: 35 Location: User is: OffLine	Re: Agrid's Bodydrop well thanks man ill keep that in mind. im still working on my suspension gotta put a new link setup in the back went with a ART 3 link and i dont like it going to go with a SD 5 link wanna be laying frame before i start my bodydrop
	[Reply w/Quote]

05-16-2009, 10:12 PM	#52
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by duck_tape187 well thanks man ill keep that in mind. im still working on my suspension gotta put a new link setup in the back went with a ART 3 link and i dont like it going to go with a SD 5 link wanna be laying frame before i start my bodydrop the art didn't allow you to lay frame? what are you going to do with the art 3 link?
	[Reply w/Quote]

05-18-2009, 09:21 AM	#53
duck_tape187 88 that needs a bodydrop Age: 23 Join Date: Mar 2009 Posts: 35 Location: User is: OffLine	Re: Agrid's Bodydrop dont know was trying to post it on the classifieds here but either im not doing something right or the classified section is screwed up im not sure if it will lay out or not i think that i will im not notched yet i just dont like the sleeve bag setup that SD 5 link is way more badass with the bags on the bars
	[Reply w/Quote]

05-18-2009, 09:49 AM	#54
duck_tape187 88 that needs a bodydrop Age: 23 Join Date: Mar 2009 Posts: 35 Location: User is: OffLine	Re: Agrid's Bodydrop if your intrested let me know
	[Reply w/Quote]

05-18-2009, 12:15 PM	#55
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by duck_tape187 if your intrested let me know yes, i might be interested. it looks kind old though. anyways here is my number give me a call or send me your number and ill call you and we'll talk. (989)621-7739
	[Reply w/Quote]

05-18-2009, 12:23 PM	#56
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by duck_tape187 dont know was trying to post it on the classifieds here but either im not doing something right or the classified section is screwed up im not sure if it will lay out or not i think that i will im not notched yet i just dont like the sleeve bag setup that SD 5 link is way more badass with the bags on the bars where are you from? i make notches too. and ill hook ya up real cheap. and they only take a few hours to install. i can them better and any size you need to layout on up to 24's. if you are running 20's you will only need a 8 inch notch if you are running 22's you will need a 10 inch notch and if you are going with 24's you will need a 12 inch notch. 8 inch is $75 for the notch $100 for the 10inch and $125 for the 12 inch. all 10gage cold rolled stell laser cut to match the curves of your frame. let me know if you would be interested in maybe a trade of some sort or what ever.
	[Reply w/Quote]

05-18-2009, 02:34 PM	#57
duck_tape187 88 that needs a bodydrop Age: 23 Join Date: Mar 2009 Posts: 35 Location: User is: OffLine	Re: Agrid's Bodydrop i might take you up on those notches. that 3 link is about 2 1/2 years old only drove on it for about 6 months and since then its been sitting in garage the motor went out on my truck and i kinda got side tracked with my ol' lady having a baby and just in the last couple of months kinda got the free time (getting laid off) to work on my truck again if your intrested shoot me an offer and maybe we could work something out
	[Reply w/Quote]

05-18-2009, 02:44 PM	#58
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by duck_tape187 i might take you up on those notches. that 3 link is about 2 1/2 years old only drove on it for about 6 months and since then its been sitting in garage the motor went out on my truck and i kinda got side tracked with my ol' lady having a baby and just in the last couple of months kinda got the free time (getting laid off) to work on my truck again if your intrested shoot me an offer and maybe we could work something out I don't know man, i don't even know what they go for new. and to honest with you i build my own link systems. i know you can buld them way cheaper then you can buy them for. but i'd be willing to give you $200 plus a notch kit. but, to be honest with you. you could probably find someone on here that rally needs it and could give you more for it. just have the pics and stuff up on here right now might even help you sell it. alot of people look through these forums and you never know, you might get a response on it. but you deside what you wanna do.
	[Reply w/Quote]

05-18-2009, 06:42 PM	#59
duck_tape187 88 that needs a bodydrop Age: 23 Join Date: Mar 2009 Posts: 35 Location: User is: OffLine	Re: Agrid's Bodydrop http://www.suicidedoors.com/4-link-k...es-s10-air-bar SD sells them for $1200 new and its a good setup. at the time i didnt have a welder and i thought that a bolt on kit would be the way to go.the it rides really good but looking back on it i should have went with the 5 link kit fron SD i was thinking like $400 plus shipping for all of it if your not intrested i might try to sell it elsewhere but ill give you first dibs since you asked about it as for the notches if i do order that 5 link kit it comes with notches so i guess ill let you know when i figure something out. are yours 8 pcs like the SD one? if so i might just get them from you because all im looking to do is a bodydrop on 20's so an 8in is plenty for me also i have a pair of big red ART valves that i dont want anymore also 2 1/2 years old with about 6 months of use i guess let me know
	[Reply w/Quote]

05-18-2009, 09:29 PM	#60
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by duck_tape187 http://www.suicidedoors.com/4-link-k...es-s10-air-bar SD sells them for $1200 new and its a good setup. at the time i didnt have a welder and i thought that a bolt on kit would be the way to go.the it rides really good but looking back on it i should have went with the 5 link kit fron SD i was thinking like $400 plus shipping for all of it if your not intrested i might try to sell it elsewhere but ill give you first dibs since you asked about it as for the notches if i do order that 5 link kit it comes with notches so i guess ill let you know when i figure something out. are yours 8 pcs like the SD one? if so i might just get them from you because all im looking to do is a bodydrop on 20's so an 8in is plenty for me also i have a pair of big red ART valves that i dont want anymore also 2 1/2 years old with about 6 months of use i guess let me know i do agree with you that sd kits are by far better than art. but you gotta think that all you have is a 3 link. and you can get a sd kit 3-link for 500.00. so 400.00 is kinda high on a used art 3 link. so i will probably pass on that. and as for the valves i have valves already so no use for them sorry. and yes the 8 peice notch kits that you can buy from sd are basically the same thing i make. but there dimentions might be different then what i make but they are all the same aspect. mine are a little thicker than most but i feel that is safer. i build all my own link kits, and all my own cross bars everything done to the truck i make with an exception of the bags and valves lines ect... i feel safer that way knowing that the quality of the product is to my standards. anyways i wish you luck on the sale of your link kit, and i hope you get what you are asking for. have a good one.
	[Reply w/Quote]

05-18-2009, 09:51 PM	#61
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop good news guys ill have that camera tomorrow, so expect those pics then.
	[Reply w/Quote]

05-18-2009, 11:53 PM	#62
duck_tape187 88 that needs a bodydrop Age: 23 Join Date: Mar 2009 Posts: 35 Location: User is: OffLine	Re: Agrid's Bodydrop thanks
	[Reply w/Quote]

05-21-2009, 04:32 PM	#63
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop ok here are the long awaited pics. i am buying myself a new digital cam today also. so no more waiting on people to come out and take them for me. the cab is now back on and the passenger side fillers are all in and the drivers side is almost done too. the the back will get done shouldnt take but a few hours. then i can get started on the firewall and the tubs. will have more pics soon.
	[Reply w/Quote]

05-26-2009, 12:44 PM	#64
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop here is what i got done the other day. and i have been working on it a little bit more here and there. i now have both sides done and firewall done too, ill get a camera and take more pics in a few days and get them up here and posted.
	[Reply w/Quote]

06-01-2009, 12:55 PM	#65
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop ok here is the welder that i used for the most of this project. here are some pics that were taken with me in them. and here are some pics of the truck. all fillers tact in place and ready to be welded in fully. i have started on that already and should have some pics of that up soon too. oh and i finally got my tracking number on those tires i bought, and they will be here on thursday so i can get some pics of those mounted on the truck too. then i can get started on my firewall tubs.
	[Reply w/Quote]

06-01-2009, 02:40 PM	#66
Oldskool94 Vroom 2.2 Vroom Age: 18 Join Date: Aug 2008 Posts: 2,730 Location: Grand Haven,MI User is: OffLine	Re: Agrid's Bodydrop looks great man are you going to oaktown?
	[Reply w/Quote]

06-01-2009, 03:58 PM	#67
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by STL_DRGN looks great man are you going to oaktown? hey whats up bro? nice to see a fellow mini trucker in michigan. i havent seen very many of us around. anyways what is oaktown and where is it? fill me in. I wanna know. talk to ya later bro.
	[Reply w/Quote]

06-01-2009, 04:28 PM	#68
Oldskool94 Vroom 2.2 Vroom Age: 18 Join Date: Aug 2008 Posts: 2,730 Location: Grand Haven,MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by layinlow_agrid hey whats up bro? nice to see a fellow mini trucker in michigan. i havent seen very many of us around. anyways what is oaktown and where is it? fill me in. I wanna know. talk to ya later bro. not to much ive been following this awhile its a good build. but oaktown is in mount clemings michigan june 20th its pretty much the biggest truck show in michigan. heres a link for some info. http://oaktowntrucks.com/ then click on the car show tab and theres all the information.
	[Reply w/Quote]

06-01-2009, 10:55 PM	#69
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by STL_DRGN not to much ive been following this awhile its a good build. but oaktown is in mount clemings michigan june 20th its pretty much the biggest truck show in michigan. heres a link for some info. http://oaktowntrucks.com/ then click on the car show tab and theres all the information. shit, i wish my ride would be done by then. i probably wont make it this year, but next year is deff. a possibility. i have so much work ahead of me still. but, shit man maybe we could get together some time. i know of a lot of events we could get in on. and i could always use a hand with my dime. anyways i just finished up my welds on the cab and took the bars off and tryed to lay her out. but, my control arms are stock and thats going to hold me up. im going to order the uppers here in a week or two then in a few more weeks ill get the lowers. and then start on my six link. im done with the drop after i get my tubs done. at least until i can get her layin down anyways. then i will continue on it some more.
	[Reply w/Quote]

06-01-2009, 11:03 PM	#70
CatDaddy52 Registered User Join Date: Nov 2008 Posts: 762 Location: Rochester Hizzle, MI User is: OffLine	Re: Agrid's Bodydrop Drive your daily to the Oaktown show.....you can meet some of the MI crew & get some good ideas for your whip!!
	[Reply w/Quote]

06-02-2009, 10:49 AM	#71
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by CatDaddy52 Drive your daily to the Oaktown show.....you can meet some of the MI crew & get some good ideas for your whip!! yeah i could do that. possibly, my work schedual is so ****ed up though. so, i guess thats a maybe. hope to see you all there. keep your eyes peeled for me. later, and thanks for the invite.
	[Reply w/Quote]

06-08-2009, 02:17 PM	#72
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop here are some new pics and updates. tub cuts for the drivers side. this is my tire size that i went with. and this what i selected for my tubs. it is enough to get both sides done it was 34.00 at the local tractor supply.
	[Reply w/Quote]

06-14-2009, 12:41 PM	#73
CRX304 Dr. Mike Age: 32 Join Date: Jun 2009 Posts: 40 Location: Attica MI User is: OffLine	Re: Agrid's Bodydrop You make me wanna cut my truck up.... Looks REAL good tho
	[Reply w/Quote]

06-14-2009, 01:13 PM	#74
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by CRX304 You make me wanna cut my truck up.... Looks REAL good tho well ithica is only about 25 30 mins from where im at. if you feel up to it then do it! ill give you a hand with the project. if it don't scrape your too high. drop that shit! in fact, i picked up the cab and the box that im using for this project from m-46 auto right there in riverdale. Last edited by layinlow_agrid : 06-14-2009 at 01:15 PM.
	[Reply w/Quote]

06-17-2009, 11:30 PM	#75
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop as i said previously in this thread that my camera was messed up. these are what the pics turn out like on the camera. shitty! never the less. here they are here are some updated pics. im going to hold off on welding the tubs in for a week or so, and get a start on the box drop and dropping the front horns. but it is cut out and i have the tubs for 22" wheels. i am running 20's but i figured some day i may want to go bigger, so i left the option open and tubed for 22's. anyways here they are............. let me know what you think. Last edited by layinlow_agrid : 06-17-2009 at 11:37 PM.
	[Reply w/Quote]

06-27-2009, 11:40 AM	#76
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop any one know of a thread on here that has a box drop walk threw? i started on my box drop just going along with it though. would like to check out some others to see if im going about this the right way or not. let me know thank you.
	[Reply w/Quote]

07-09-2009, 12:04 PM	#77
Kneegra SRH Join Date: Nov 2007 Posts: 491 Location: anderson, in User is: OffLine	Re: Agrid's Bodydrop looks good man, any updates?
	[Reply w/Quote]

07-10-2009, 12:23 AM	#78
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by Kneegra looks good man, any updates? yeah i have to get pics of it. but really havent had alot of time to work on it lately. ive been working alot and havent had much free time.
	[Reply w/Quote]

07-14-2009, 06:47 PM	#79
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop ok here is a little update. bar welded in on horns and marks layed out. im going to cut these within the next couple of days and get them lined up and welded in. then get my core support in place and get the fenders back on. then move on to the box drop, and my custom made by me rear 6-link. anyways here they are.
	[Reply w/Quote]

07-14-2009, 07:52 PM	#80
Kneegra SRH Join Date: Nov 2007 Posts: 491 Location: anderson, in User is: OffLine	Re: Agrid's Bodydrop hell yea man looks good
	[Reply w/Quote]

07-14-2009, 11:20 PM	#81
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by Kneegra hell yea man looks good thanks a lot man, check back in a few days to see the updates on it. i should have time over the next few days and this weekend to work on it a lil bit here and there. have a good one.
	[Reply w/Quote]

08-16-2009, 10:30 PM	#82
Kneegra SRH Join Date: Nov 2007 Posts: 491 Location: anderson, in User is: OffLine	Re: Agrid's Bodydrop any new progress?
	[Reply w/Quote]

08-17-2009, 12:34 AM	#83
n0sh0b0i Registered User Age: 28 Join Date: Oct 2002 Posts: 461 Location: North Shore/Makakilo, Oahu User is: OffLine	Re: Agrid's Bodydrop Maybe he's got lazy like I did... After I set my truck down I got really lazy... I haven't touched the truck for almost a month already and I still have to make my lift bars and sheetmeral my bed Last edited by n0sh0b0i : 08-17-2009 at 12:36 AM.
	[Reply w/Quote]

08-18-2009, 04:55 PM	#84
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop Quote: Originally Posted by n0sh0b0i Maybe he's got lazy like I did... After I set my truck down I got really lazy... I haven't touched the truck for almost a month already and I still have to make my lift bars and sheetmeral my bed naw man, just got alot of shit going on. moving to a new shop and just life in general. ill have some updates in a few weeks for you guys.
	[Reply w/Quote]

09-04-2009, 11:50 AM	#85
layinlow_agrid layinlow_agrid Age: 26 Join Date: Mar 2009 Posts: 171 Location: Remus, MI User is: OffLine	Re: Agrid's Bodydrop ok new update. not anything more done to the truck but the move is almost complete now. have everything at the new shop now with an exception of about two or three more loads of tools and odds and ends. so ill get cracking on the truck again soon. probably mid to end week.
	[Reply w/Quote]