98+ Blazer 2 door conversions

StreetBeatz 3 · 02-09-2008, 06:42 PM

Wanted to see some blazer front end conversions. Havnt seen tooo many of them and was wonderin what some looked like. And how hard parts are to get ahold of and actually put on.

shotgunwillie · 02-09-2008, 07:13 PM

are you talking about putting a 98+ forntend on a older modle or something custom?

Rhotpursuit · 02-09-2008, 07:48 PM

Well...here's mine...this thread will probably get closed real soon because of non use of the search button...

StreetBeatz 3 · 02-10-2008, 12:27 PM

I did use the search button, but i never pulled up what i was lookin for. And i'm lookin for Blazer's preferably that are 1998 and up....that gen...with front end conversions.

Rhotpursuit · 02-10-2008, 02:22 PM

Just what kind of conversion are you looking for?? Sealed beam to composite, Envoy, Jimmy, Silvy. If sealed beam to composite, it doesn't matter if it's p/u or Blazer...same parts are required.

Edit...never mind about the sealed beam to composite...just noticed it's for 98+

StreetBeatz 3 · 02-10-2008, 02:24 PM

I'm just wanting to see some of the conversions people do. I seen them on lots of s10's but only a couple blazers. I"m just wanting to see soem of the combinations like envoys, ss bumbers, and just other combinations to see which one i like and about how much and what all is needed to do it.

purplepassion · 02-10-2008, 02:29 PM

my blazer has an envoy front. you can see pics in my project thread

Rhotpursuit · 02-10-2008, 02:31 PM

I just did a search for "front end conversions" Second thread down has 388 replies with 45K views...should be something there that strikes your fancy.

BanginJimmy · 02-11-2008, 01:17 PM

sonoma, jimmy, s-10 and blazer front ends all look the same when they have a conversion done on them.

bmxbang · 02-11-2008, 01:24 PM

K Dawg ONE · 02-11-2008, 02:30 PM

oaktowntrucks.com
Right on the homepage is a TB front on a Blaze...

Calvin51 · 02-12-2008, 12:51 PM

http://img.photobucket.com/albums/v4...e%20SS/SS2.jpg

That is just sweet looking!!!!

Cal

StreetBeatz 3 · 02-12-2008, 01:11 PM

***sdime98*** · 02-12-2008, 01:14 PM

Quote: Originally Posted by BanginJimmy

sonoma, jimmy, s-10 and blazer front ends all look the same when they have a conversion done on them.

no shit, i don't understand this....they are all the same from the doors forward...

cpolaris502 · 02-12-2008, 01:17 PM

http://www.s10forum.com/forum/f72/fr...sion-s-209335/

theres the thread rhotpusuit was talking about. tons of replies.

and why would it matter if they were 98+ if you are looking for front conversions? any 2nd would work.

StreetBeatz 3 · 02-12-2008, 05:19 PM

I was trying to narrow it as much as possible so i would get specifically what i was lookin for.

StreetBeatz 3 · 02-12-2008, 05:21 PM

More than anything i want pictures of the process of it. Almost like a how-to kinda.

bmxbang · 02-12-2008, 05:35 PM

Quote: Originally Posted by StreetBeatz 3

More than anything i want pictures of the process of it. Almost like a how-to kinda.

well you kinda have to narrow it down to what front end you want then you can get an how to if its a common one.

BanginJimmy · 02-13-2008, 05:03 PM

98+ to envoy add gmc headlights, grill shell and envoy bumper cover

94-97 same as 98+, then add in core support

all others, either custom made or sectioned core support, then sectioned stock parts. A how-to would be pretty pointless because theres more to it than any pics would show you.

DRAGIN LS · 02-13-2008, 11:15 PM

Quote: Originally Posted by bmxbang

LOVE THAT FRONT END MAN, THAT LOOKS SICK

860gmc · 02-22-2008, 11:21 PM

Quote: Originally Posted by DRAGIN LS

LOVE THAT FRONT END MAN, THAT LOOKS SICK

ya that is soo sick but im confused what kind of conversion is that like what front end is it ? and do you guys know if it as easy as a 98 + conv. on a 95-97 ? bcuz it looked like the fender was trimmed to contour the light to me

purplepassion · 02-22-2008, 11:22 PM

thats a trailblazer front end........and its alot more work than just a 98+ swap.

Azzurri · 02-22-2008, 11:25 PM

Quote: Originally Posted by 860gmc

ya that is soo sick but im confused what kind of conversion is that like what front end is it ? and do you guys know if it as easy as a 98 + conv. on a 95-97 ? bcuz it looked like the fender was trimmed to contour the light to me

It's a trailblazer front end conversion. Fair bit of fab work involved, but nothing overly complicated. There's a thread going with a bunch of pics somewhere here.

860gmc · 02-22-2008, 11:27 PM

ok i kno its a trail blazer light swap but does anyone know how hard it is ?

BanginJimmy · 02-23-2008, 12:16 AM

you need to trim down the bumper cover, grills, and grill shell. You need to fab or mod a core support and you need to extend and trim the fender and hood. Its not a weekend job and probably a waste of money to buy the parts unless you really know what you are doing.

860gmc · 02-23-2008, 03:18 AM

haha hello just keepin my stock headlights and grill assembly.. i live like 15 away from a junkyard and was gunna go see if i could find th TB headlights and grill but i guess i'll just do a 98 + swap if anything

02-09-2008, 06:42 PM	#1
StreetBeatz 3 Registered User Age: 21 Join Date: Jan 2007 Posts: 91 Location: Bellevue, Nebraska User is: OffLine	98+ Blazer 2 door conversions Wanted to see some blazer front end conversions. Havnt seen tooo many of them and was wonderin what some looked like. And how hard parts are to get ahold of and actually put on.
	[Reply w/Quote]

02-09-2008, 07:13 PM	#2
shotgunwillie Registered User Join Date: Sep 2007 Posts: 130 Location: vidalia,ga User is: OffLine	Re: 98+ Blazer 2 door conversions are you talking about putting a 98+ forntend on a older modle or something custom?
	[Reply w/Quote]

02-09-2008, 07:48 PM	#3
Rhotpursuit Ticket Magnet Join Date: Sep 2003 Posts: 4,284 Location: Spanaway, Wa User is: OffLine	Re: 98+ Blazer 2 door conversions Well...here's mine...this thread will probably get closed real soon because of non use of the search button...
	[Reply w/Quote]

02-10-2008, 12:27 PM	#4
StreetBeatz 3 Registered User Age: 21 Join Date: Jan 2007 Posts: 91 Location: Bellevue, Nebraska User is: OffLine	Re: 98+ Blazer 2 door conversions I did use the search button, but i never pulled up what i was lookin for. And i'm lookin for Blazer's preferably that are 1998 and up....that gen...with front end conversions.
	[Reply w/Quote]

02-10-2008, 02:22 PM	#5
Rhotpursuit Ticket Magnet Join Date: Sep 2003 Posts: 4,284 Location: Spanaway, Wa User is: OffLine	Re: 98+ Blazer 2 door conversions Just what kind of conversion are you looking for?? Sealed beam to composite, Envoy, Jimmy, Silvy. If sealed beam to composite, it doesn't matter if it's p/u or Blazer...same parts are required. Edit...never mind about the sealed beam to composite...just noticed it's for 98+
	[Reply w/Quote]

02-10-2008, 02:24 PM	#6
StreetBeatz 3 Registered User Age: 21 Join Date: Jan 2007 Posts: 91 Location: Bellevue, Nebraska User is: OffLine	Re: 98+ Blazer 2 door conversions I'm just wanting to see some of the conversions people do. I seen them on lots of s10's but only a couple blazers. I"m just wanting to see soem of the combinations like envoys, ss bumbers, and just other combinations to see which one i like and about how much and what all is needed to do it.
	[Reply w/Quote]

02-10-2008, 02:29 PM	#7
purplepassion blazer is dunnnnnnnnn! Age: 21 Join Date: Jun 2005 Posts: 10,624 Location: Mt. Washington, KY User is: OffLine	Re: 98+ Blazer 2 door conversions my blazer has an envoy front. you can see pics in my project thread
	[Reply w/Quote]

02-10-2008, 02:31 PM	#8
Rhotpursuit Ticket Magnet Join Date: Sep 2003 Posts: 4,284 Location: Spanaway, Wa User is: OffLine	Re: 98+ Blazer 2 door conversions I just did a search for "front end conversions" Second thread down has 388 replies with 45K views...should be something there that strikes your fancy.
	[Reply w/Quote]

02-11-2008, 01:17 PM	#9
BanginJimmy Registered User Age: 30 Join Date: Feb 2005 Posts: 1,615 Location: dallas, ga User is: OffLine	Re: 98+ Blazer 2 door conversions sonoma, jimmy, s-10 and blazer front ends all look the same when they have a conversion done on them.
	[Reply w/Quote]

02-11-2008, 01:24 PM	#10
bmxbang Registered User Age: 23 Join Date: Jan 2004 Posts: 8,021 Location: Bluesprings, MO User is: OffLine	Re: 98+ Blazer 2 door conversions
	[Reply w/Quote]

02-11-2008, 02:30 PM	#11
K Dawg ONE CDN 2WD 2Gen 4-Door! Age: 27 Join Date: May 2007 Posts: 1,844 Location: Windsor, Ontario, Canada User is: OffLine	Re: 98+ Blazer 2 door conversions oaktowntrucks.com Right on the homepage is a TB front on a Blaze...
	[Reply w/Quote]

02-12-2008, 12:51 PM	#12
Calvin51 Registered User Join Date: Dec 2007 Posts: 167 Location: User is: OffLine	Re: 98+ Blazer 2 door conversions http://img.photobucket.com/albums/v4...e%20SS/SS2.jpg That is just sweet looking!!!! Cal
	[Reply w/Quote]

02-12-2008, 01:11 PM	#13
StreetBeatz 3 Registered User Age: 21 Join Date: Jan 2007 Posts: 91 Location: Bellevue, Nebraska User is: OffLine	Re: 98+ Blazer 2 door conversions Ttt
	[Reply w/Quote]

02-12-2008, 01:14 PM	#14
*sdime98* slowly, but surely. Age: 24 Join Date: Feb 2003 Posts: 49,347 Location: Laurel Hill, NC User is: OffLine	Re: 98+ Blazer 2 door conversions Quote: Originally Posted by BanginJimmy sonoma, jimmy, s-10 and blazer front ends all look the same when they have a conversion done on them. no shit, i don't understand this....they are all the same from the doors forward...
	[Reply w/Quote]

02-12-2008, 01:17 PM	#15
cpolaris502 The Dreamsicle Age: 20 Join Date: Jul 2005 Posts: 16,052 Location: Rogers, MN User is: OffLine	Re: 98+ Blazer 2 door conversions http://www.s10forum.com/forum/f72/fr...sion-s-209335/ theres the thread rhotpusuit was talking about. tons of replies. and why would it matter if they were 98+ if you are looking for front conversions? any 2nd would work.
	[Reply w/Quote]

02-12-2008, 05:19 PM	#16
StreetBeatz 3 Registered User Age: 21 Join Date: Jan 2007 Posts: 91 Location: Bellevue, Nebraska User is: OffLine	Re: 98+ Blazer 2 door conversions I was trying to narrow it as much as possible so i would get specifically what i was lookin for.
	[Reply w/Quote]

02-12-2008, 05:21 PM	#17
StreetBeatz 3 Registered User Age: 21 Join Date: Jan 2007 Posts: 91 Location: Bellevue, Nebraska User is: OffLine	Re: 98+ Blazer 2 door conversions More than anything i want pictures of the process of it. Almost like a how-to kinda.
	[Reply w/Quote]

02-12-2008, 05:35 PM	#18
bmxbang Registered User Age: 23 Join Date: Jan 2004 Posts: 8,021 Location: Bluesprings, MO User is: OffLine	Re: 98+ Blazer 2 door conversions Quote: Originally Posted by StreetBeatz 3 More than anything i want pictures of the process of it. Almost like a how-to kinda. well you kinda have to narrow it down to what front end you want then you can get an how to if its a common one.
	[Reply w/Quote]

02-13-2008, 05:03 PM	#19
BanginJimmy Registered User Age: 30 Join Date: Feb 2005 Posts: 1,615 Location: dallas, ga User is: OffLine	Re: 98+ Blazer 2 door conversions 98+ to envoy add gmc headlights, grill shell and envoy bumper cover 94-97 same as 98+, then add in core support all others, either custom made or sectioned core support, then sectioned stock parts. A how-to would be pretty pointless because theres more to it than any pics would show you.
	[Reply w/Quote]

02-13-2008, 11:15 PM	#20
DRAGIN LS Registered User Age: 24 Join Date: Feb 2008 Posts: 3 Location: User is: OffLine	Re: 98+ Blazer 2 door conversions Quote: Originally Posted by bmxbang LOVE THAT FRONT END MAN, THAT LOOKS SICK
	[Reply w/Quote]

02-22-2008, 11:21 PM	#21
860gmc Registered User Age: 18 Join Date: Jul 2007 Posts: 121 Location: User is: OffLine	Re: 98+ Blazer 2 door conversions Quote: Originally Posted by DRAGIN LS LOVE THAT FRONT END MAN, THAT LOOKS SICK ya that is soo sick but im confused what kind of conversion is that like what front end is it ? and do you guys know if it as easy as a 98 + conv. on a 95-97 ? bcuz it looked like the fender was trimmed to contour the light to me
	[Reply w/Quote]

02-22-2008, 11:22 PM	#22
purplepassion blazer is dunnnnnnnnn! Age: 21 Join Date: Jun 2005 Posts: 10,624 Location: Mt. Washington, KY User is: OffLine	Re: 98+ Blazer 2 door conversions thats a trailblazer front end........and its alot more work than just a 98+ swap.
	[Reply w/Quote]

02-22-2008, 11:25 PM	#23
Azzurri Registered User Age: 27 Join Date: Oct 2007 Posts: 105 Location: North Delta, BC User is: OffLine	Re: 98+ Blazer 2 door conversions Quote: Originally Posted by 860gmc ya that is soo sick but im confused what kind of conversion is that like what front end is it ? and do you guys know if it as easy as a 98 + conv. on a 95-97 ? bcuz it looked like the fender was trimmed to contour the light to me It's a trailblazer front end conversion. Fair bit of fab work involved, but nothing overly complicated. There's a thread going with a bunch of pics somewhere here.
	[Reply w/Quote]

02-22-2008, 11:27 PM	#24
860gmc Registered User Age: 18 Join Date: Jul 2007 Posts: 121 Location: User is: OffLine	Re: 98+ Blazer 2 door conversions ok i kno its a trail blazer light swap but does anyone know how hard it is ?
	[Reply w/Quote]

02-23-2008, 12:16 AM	#25
BanginJimmy Registered User Age: 30 Join Date: Feb 2005 Posts: 1,615 Location: dallas, ga User is: OffLine	Re: 98+ Blazer 2 door conversions you need to trim down the bumper cover, grills, and grill shell. You need to fab or mod a core support and you need to extend and trim the fender and hood. Its not a weekend job and probably a waste of money to buy the parts unless you really know what you are doing.
	[Reply w/Quote]

02-23-2008, 03:18 AM	#26
860gmc Registered User Age: 18 Join Date: Jul 2007 Posts: 121 Location: User is: OffLine	Re: 98+ Blazer 2 door conversions haha hello just keepin my stock headlights and grill assembly.. i live like 15 away from a junkyard and was gunna go see if i could find th TB headlights and grill but i guess i'll just do a 98 + swap if anything
	[Reply w/Quote]